Camcorder Display shows smaller image area than FC Viewer

The Camcorder Display (I use a Sony FX1 - but it is like that with every consumer camcorder) shows only about 90 percent !!! of the whole image, that I see, when I look at the video in Final Cut.
Specially in HDV it is very bad. I make videos mainy with stuctures of nature and arcitecture - it is very disturbing, that I cannot get exactly the image area, that I need. Only professional cameras offer an overscanning for the display image, that shows really the whole image, that is recorded!
One solution is to take my iBook with me - in iMovie I can see the live picture exactly as it is recorded.
But that's a very bad workaround to me. I don't want to carry my iBook with me all the time!
How do you solve this problem?
What are doing?

How do you solve this problem?<<</div>
1. get a professional camcorder
- or -
2. use a pro monitor on location
- or -
3. learn to judge your actual image acquisition area - the part not displayed in the viewfinder.
The same thing applies to many 35mm and digital still cameras - even the "pro" models often don't show the entire image area in their viewfinders. It takes some practice, but you should be able to learn how to "see" beyond the viewfinder's limits so you know what you're actually recording.
-DH

Similar Messages

Firefox is not displaying PDFs correctly images are coming out really black?

Compare this web link in Firefox to any other browser and you will see the difference.
http://rbhsound.com/images/literature/lit_ctxseries.pdf
This image displays correctly in Internet Explorer.
Has something changed in Firefox recently, I have never had this problem before?
Working in Windows 7 with the latest version of Mozilla

In Firefox, are you viewing your PDF in the built-in PDF viewer? You can check whether it makes any difference to use the Adobe Acrobat plugin. This article has the steps to switch between them: [[How to disable the built-in PDF viewer and use another viewer]].
(I just installed Firefox 30, so my results may not be relevant to Firefox 29, but the images look the same to me in the viewer and in the stand-alone Adobe Reader.)

IWeb and .Mac images are dark when viewed with PCs--how to fix?

I do my Photo editing in iPhoto on an iMac or an iBook, and the images look fine. Once posted to a .Mac or iWeb page, they still look fine on my Mac monitors, but when viewed on PCs and PC laptops, they are MUCH darker... The sites look terrible. The brightness on the nonMac monitors is turned up already.
Is there something special I should do to get images to appear correctly on nonMac machines?

Thanks for the responses. This has been a problem for a couple of years and this is real advice! I even had this problem with a book published through Apple. Anyway...
I didn't follow Barbara advice (OK, I'm slow, but I couldn't quite figure out where the gamma setting was), but I did use Falcon01's suggestion to use the sRGB IEC61966-2.1 profile.
I then reviewed and re-edited the relevant pictures. In this case, they are pictures of my girlfriend's condo she is trying to rent (mostly slightly off-white walls (aren't they all?) and dark, rich parquet flooring.) First, the pictures were darker, and I could adjust the exposure to much brighter, which helped a great deal. It did, however, introduce lots of color artifacts (pinkish blotchy walls). I drastically reduced the saturation which (good) made the walls look fairly normal, but (bad) made the rich wood flooring look drab and grayish. For this purpose, this will be satifactory--the pictures now at least are bright enough to not look dark and dank, and people can see what the rooms look like.
When I try this on important pictures of people and such, this approach makes me nervous. Most pictures will look awful if I boost expsoure and drain the color out. How do others handle this? Thanks in advance. BTW, here is the revised web site if interested.
http://web.mac.com/curtishaymore/iWeb/B7EC3471-1B51-467B-8C79-01CD335FC856/Libra ry%203.html

Having trouble displaying small image in Cart

Hello everyone. I have been having trouble displaying the small image in my cart. I know that the image is there, yet it wont display. Any help would be appreciated. Thanks
http://www.highestgoodclothing.com/men/stl-tee

.productitemcell { }
That in your css has no height.
Add height:auto; to your code.

After upgrading to 3.5 from a library of images are not displayed.

After upgrading to 3.5 from a library of images are not displayed. All images are filled with black. Ifoto the same library looks fine.

Yes, they are compile errors, which state 'xmlObject cannot be resolved to a type' on this line: protected XmlObject xmlDocument = null;
and on an import line: import org.apache.xmlbeans.*;
the compiler states the import.org.apache.xmlbeans cannot be resolved.
I have three classes that deal with xml objects and all three have the same errors.
Also I'm getting the same type of errors on an import javax.media

How can i Display my images in cover flow view in Keynote?

I am working on a project .I am on Mavericks . I need to make a presentation of my project ideas . My project involves showing some images in cover flow view . So, is there any way i can show my images in cover flow view in keynote or pages app or by using any other app .

Keynote is an screen based presentation application
Pages is a page layout application for print output
Coverflow is a viewing option of the finder to look at the contents of a folder
To create a slideshow of your images, open Keynote and drag and drop images from a folder into the Navigator pane then press the play button
The Navigator panel is the side panel on the left

Displaying a stereoscopic image for shutter glasses displays

I am very new to flex, I am trying to decide which toolset will be optimal for me.
Is it possible to create an application using flex that displays a stereoscopic image, which can be viewed using nVidia 3D Vision glasses? If yes, can you give me some starting points?
My application will receive generated stereo images in real time over the network and should display them. I have complete control over the generation of the images, know how stereo images work, and know to write such an application in C++/DirectX.
Youtube's flash player recently got 3D Vision stereoscopic movie support, so I assume this should be possible.
Thanks for any help

Hey ronfya
Did you ever get any feedback on this? I haven't read the Technicolor link yet. I was just trying to figure out why my stuff comes out darker on Vimeo. Could this be because FCPX is displaying it to brightly?
A.T.

Developer Module only shows blue square with a white cross, images are displayed in the library ok but not im developer Module

Ive just updated to LR 6 from LR 5.
The app seemed to launch ok but as I was looking around none of my photos will open in the developer module, they just have a blue box with white cross??

It seems to be something to do with Lightroom 6 accessing the GPU. I had this problem and under the "Performance" tab in "Preferences" (Edit menu), there's a box that says "Use graphics processor". I unticked this box and now the images are displayed in the developer module. I'll need to investigate further to find out why Lightroom is not working with my GPU but at least I can use it now.

Forwarded images are much smaller than the original

Something new has happened. After 10 years of Mail I am just experiencing this phenomenon. When I forward an email with pictures or illustrations attached, the forwarded images are about 75% the size of the original. In many instances that takes the readability away. Does anyone have an idea how I can fix this or what causes it? Thanks.

What size is set in the New Message widow in Mail?
Uploaded with plasq's Skitch!
Regards
TD

Small images not showing in design view

Desperate for help! I've been trying to diagnose this for a
long time. For some strange reason, images that used to show up in
my design view are now displaying the 'missing image' icon. I've
narrowed it down to this--if the image is less than 8px high, the
image will not display. When I increase it to 8px or more high
(width does not have any bearing on it), the image is displayed.
Same exact image name, same placement, path, file type, etc. The
only variable changed is the image height. Someone please tell me
what is going on. By the way, this just started to happen. These
small images were displaying fine up until yesterday.

You have two id="header" elements on the page....
I can see both the 5px tall GIF and JPG images just fine in
CS4.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"peregrinedesign" <[email protected]> wrote
in message
news:gmiaur$bv$[email protected]..
> OK, but I'm not sure this will help. Here's the page:
>
http://www.capitaloandp.com/orthotics.php
>
> What you will see is correct, and when I preview with a
browser it is fine
> also, it's only the DW design view that is not showing
the small jpeg.
> On the right side, there are two small black rectangles.
The one on the
> left
> is a gif, and the one on the right is the jpg. They were
both exported
> from the
> same original Fireworks file. I have tested using
Photoshop also.
>
> Thank you for your attention to this.
>

Fireworks CS-4 Slideshow images are too small. How can I fix this?

I've used the Fireworks CS-4 slideshow, for the Portfolio page of my website, for awhile now. However, more recently, after I've added new images to my slideshow, and previewed the slideshow in my browser, all the images are showing up way too small in the viewing area (slightly larger than thumbnail size). This was not happening before. I am running Windows 7 Pro on a 64 bit machine. Originally, I was running Vista Home Premium. Have not "put" the updated slideshow until issue is resolved. What may be causing the smaller images? What can I do to fix the problem? I'm a wysiwyg designer; not a techy. Thanks.

Here is a screenshot of what is loading....
I can't even get add-ons or extensions.

How do you change the location of a small image within an IMAQ image display?

I have an image that exactly fills the display. But then I want to extract a portion of the image and display that small piece, but have it be in the same location as it was before, not centered in the display (essentially I want to crop the image but leave it in the same location). I tried the 'Image Center Position' property node for the image display, but is resets itself to the center of the display. Can anyone offer any suggestions?
Thanks,
Marty
Attachments:
Crop_Pic_Test.vi ‏102 KB

Marty_M wrote:
I have an image that exactly fills the display. But then I want to extract a portion of the image and display that small piece, but have it be in the same location as it was before, not centered in the display (essentially I want to crop the image but leave it in the same location). I tried the 'Image Center Position' property node for the image display, but is resets itself to the center of the display. Can anyone offer any suggestions?
You misused the Image Center position property : it works only on images larger than the display area. Have a look at the simplified version of your sample vi.
One way to achieve your objective will be to create a black (or white) background image, with the same size as the original image and to paste the small piece over this BG.
Happy New Wires
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Crop_Pic_Test[2].zip ‏22 KB

Larger image changed, but smaller thumbnails still show old image

Hi,
I want to change the image for my podcast. I added the new image to my server and added an image tag to my rss file pointing to it. Now in the iTunes store, the larger thumbnail shows the correct image, but the smaller thumbnails in the store show the old one. Do I just need to wait longer, or is there something else I have to do?
Feed = http://feeds.feedburner.com/walkingdeadcast
Thanks!
Jason

For some reason the thumbnails in the Search results take longer to update than the image on the Store page. They're both drawn from the same tag in your feed, so there's nothing you can do except wait: it will probably sort itself out in a day or two.
Edit: actually I just searched on your podcast title and the search results showed the same image as the main Store page.
Another edit: I assume you are talking about the Search results, not what you see when you subscribe? Those images are embedded in the media files, not referenced in the feed. I just downloaded one of the episodes on subscription and I see it has a different image. In order to change this you will have to embed new images in every episode and re-upload them - see here.

A few days ago my TV show and movie displays went whacky-the shows are no longer in alpha order, there are multiple listings of the same show, the pictures are random-including album covers. I downloaded latest version. Any ideas??

A few days ago my TV show and movie displays went whacky-the shows are no longer in alpha order, there are multiple listings of the same show, the pictures are random-including album covers. I downloaded latest version & no change. Any ideas??

ME TOO.
I think mine are all still in alphabetical order, but :
* movies I deleted from my library and told "hide this purchase in the cloud" are showing up again. If I try to play them, I get the "cannot find the file in its proper location, would you like to locate it" error message.
* for movies that have "iTunes Extras," the extras show up as a separate item, with another copy of the movie artwork. Most of these I believe I had DELETED the "iTunes Extras" anyway.
* Items are showing up multiple times.
* A few MUSIC ALBUMS are listed in my Movies section.
* Some movies (I believe ones that I deleted off my HD but are still in the cloud) are showing random album covers instead of their proper artwork.
* Just rented a movie, and it didn't show up anywhere in my library. It downloaded properly and completely, was in a suitably labeled folder in my iTunes/Media/Movies section, but didn't show up in any section of the library (or via a library search). Had to manually find it and tell it to open the file using iTunes.
Running the latest version, even checked for updates. No other changes made lately since the last round of apple software updates. This was wonky before the latest small update to iTunes - now it's even wonkier. And it is very, VERY effing annoying.

Display image in BSP page,images are on a web server outside of SAP

Hi,
I am creating a BSP page for employee profile.The page needs to show an emp picture along with other info.The images are not in the MIME repository,they are stored in a separate web server.I am able to display the page using
<img border="0"                     src="http://.com/xyz/xyz.bmp" >
However this is a non secured test server. If the images are on a secured server,I am assuming,an id ,pswd authentication will be required.Can I get the authentication done automatically so that the page is rendered seamlessly for the end user?
Would SSO help if this web server is a portal server?what if the web server is not a portal server?

Hi Manidipa,
The Http class in SAP can also be used in passing the required authentication information to the non-SAP portal system.
http://searchsap.techtarget.com/whitepaperPage/0,293857,sid21_gci1084087,00.html
There is an article written by Angeli Axel which does the same. The article has got ABAP HTTP classes and methods to get and post the parameters to the non-SAP portal system.
The same solution can be done by passing the credentials in the url. The custom solution would be to pass the required credentials in the url and the receiving application should grab those information from the url and confirm the authentication. After that it should be able to provide you the image. After getting the image it can be simply displayed in your BSP using iframe tag.
For eg if the receiving side is in java, then the following code can be used to receive the username and password. Once you get this you can verify the validity depending on the datasource whether LDAP(MS-ADS, Sun one, Novell edirectory) or ordinary database(Oracle, MS SQL Server .. etc) is used for storing the credentials.
try {
          String userName = request.getParameter("username");
          String password = request.getParameter("password");
          if (validateUser(userName, password)) {
             response.sendRedirect("mainpage.jsp");
The main page here you display the image
} catch (Throwable t) {
The above code should be considered as pseudo code for any server side language.
Please let me know if this helps.
With regards,
Rajesh Khanna Venkatesan.

Camcorder Display shows smaller image area than FC Viewer

Similar Messages

Maybe you are looking for