Camcorder uploading with time stamp option
I am looking for a program that will upload my panasonic camcorder videos and time stamp it as well quickly and efficiently.
If it failed in BW (request is red) and you do a delta - system will ask to mark it a 'repeat' because the last one failed. When you choose 'repeat', it is going to let the extractor know that it is a repeat delta.
In this case, it will extract data from 25th to current date (both last and current delta).
Repeat delta will work the same, just that the lower and upper limits will be applied to the selection of the delta field.
Lower limit -> adjust back the lower selection value by this value
upper limit ->Adjust back the upper selection value by this much.
upper limit 1, lower limit 1 (by the way lower limit isn't usually applicable in real situations)
Ran delta on 20th first time
Select all data upto 19th (adjusted due to upper limit)
Ran again on 23rd
Select from 19th (ie 20 - 1 due to lower limit 1) upto 22nd (ie 23 - 1 due to upper limit)
Ran on 27th
Select from 21st (22 - 1 due to lower limit 1) upto 26th (27 - 1 due to upper limit) and so on.
Repeat delta will follow this logic but will also bring the selection that was executed in the last delta run.
Hope it clears.
Similar Messages
-
Mail attachment with time stamp
Hi
My scenario is Proxy to Mail.
On receiver side I am getting the data as an attachment but i want that attachment with time stamp.
How to add time stamp to the attachment in reciever mail adapter.
Regards
Sowmya
Edited by: Sowmya on Aug 28, 2008 12:24 PMhi sowmya,
The bellow link for MessageTransformBean..
[http://help.sap.com/saphelp_nw70/helpdata/EN/57/0b2c4142aef623e10000000a155106/content.htm]
In that ContentDisposition is used to fill the value for Attachment file name..
Its allows the value accordingly "RFC1806" Note..
RFC1806 allows accordingly RFC822 ..
Check RFC822 ..
5. DATE AND TIME SPECIFICATION
Regards,
Prakasu -
File name for append processing mode with time stamp
Hi Experts
we are doing file to file scenario using the processing mode as Append.
the requirement for us to append the files and we need to have new file name with time stamp added to the appended file.but in the processing mode of the file adapter either we can append or add time stamp. thatz the problem I am facing now.
we are doing file based processing not message based ,micheal blog regarding the dynamic file name is for message based not for file based.
Please provide your valuable comments.
Thanks
FaheemHi mohamed,
I suggest you to map the target source structure to the required filename u want, like for example ur filename is input26062008.txt means to the target structure u perform the following mapping
constant (input) concat with currentdate function --> concat with constant .txt --> map this concat to target. So u will get the filename u expected with the time.
Then in the communication channel u select the mode as append. Now ur requirement will get solve i think so. plz try.
Regards,
Murugavel -
How to read multiple Digital samples and plot a chart with time stamps
Hi,
Could anyone send me a code that:
1. Reads 'multiple samples(lets say 4) from single digital input'
2. 'plot digital data as a chart with time stamps'
3. Find frequency
4. Log data into file with time stamps
I have attached the code which i tried.
Thanks,
LK
Attachments:
DigitalNSample.vi 27 KB
DigitalNSample.vi 27 KBHi,
Could anyone send me a code that:
1. Reads 'multiple samples(lets say 4) from single digital input' using NI USB 6009 or NI USB 6251.
2. 'plot digital data as a chart with time stamps'
3. Find frequency
4. Log data into file with time stamps
I have attached the code which i tried.
Thanks,
LK
Attachments:
DigitalNSample.vi 27 KB -
TDMS viewer not showing data with time stamp
Need help with time stamping data in a TDMS file generated by DAQ Assistant.
When I use the TDMS Viewer, with the x-scale set to absolute time, the date starts at 1903. If I use Excel to look at the file the start time is correct (i.e. 2013).
Solved!
Go to Solution.Bo_Xie, I have simplifed my VI and now able to display the correct time stamp. Thank for your time!
-
Advertisement Details of Specific Computer with Time Stamp
Hello Guys,
Could you please help me how to get Advertisement Details of Specific Computer with Time Stamp?
Thanks in Advance.
MukhyapranaIt's true that there is no reliable install date, but IMO last status time for an advertisement is usually close enough.
Select r.name0, adv.advertisementname, stat.laststatename, stat.lastexecutionresult, stat.lastStatusTime
from v_r_system r
inner join v_clientAdvertisementStatus stat on stat.resourceID = r.resourceID
inner join v_advertisement adv on stat.AdvertisementID = adv.AdvertisementID
where r.name0 = 'clientname'
order by adv.advertisementname -
Apache Trinidad is running with time-stamp checking enabled.
Experts,
Contents of my web.xml file
<context-param>
<description>If this parameter is true, there will be an automatic check of the modification date of your JSPs, and saved state will be discarded when JSP's change. It will also automatically check if your skinning css files have changed without you having to restart the server. This makes development easier, but adds overhead. For this reason this parameter should be set to false when your application is deployed.</description>
<param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
<param-value>false</param-value>
</context-param>When my application runs i get the following on the weblogic console
<ViewHandlerImpl> <_checkTimestamp> Apache Trinidad is running with time-stamp checking enabled. This should not be used in a production environment. See the org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION property in WEB-INF/web.xml
<UIXEditableValue> <_isBeanValidationAvailable> A Bean Validation provider is not present, therefore bean validation is disabled
Isnt it a bit strange ? Please advise what is wrong.
thnks
jdev 11.1.2.1If you're talking about the integrated WLS, time-stamp checking is automatically enabled no matter what so that changes you make in the IDE can be picked up. It's nothing to worry about.
John -
Inserting Current Date with time stamp in oracle database
Hi Experts,
I want to insert the current Date and time stamp in a field in the Oracle Database Table.
I am able to insert date but i am not able to insert the date with time stamp. Any Suggestions??
Thanks
NaveenNaveen,
Do you want to get current date (from sysdate) with a specific format or transform a value containing a date/time value to insert it in ORACLE ?
Usually, you insert current datetimestamp in a date field using this :
TO_DATE(sysdate,'dd/mm/yyyy hh:mi:ss')
you may have to tweak the format pattern ('dd/mm....') according to your needs
if you want to transform a date, use something like this:
TO_DATE(your_date,your_format)
but make sure your format is compliant with your date, ie
TO_DATE('31/12/2008','MM/DD/YYYY') could raise error (litteral does not match) cuz ORACLE can't recognize 31 as a month pattern
Chris -
Hi All,
I using RFC to file scenario ,in this when file is created it folder it is coming with date and time stamp.but i am not using add time stamp in processing paramerts.i have checked the file name in communication channel monitoring it is coming without timestamp
but in folder file is getting created with time stamp.
RegardsHi Gangadhar,
In the receiver file adapter, under Processing tab, see the value of File Construction Mode.
This value should be Create instead of Add Time Stamp.
After making the changes save & activate the file receiver channel. The output file then will not have timestamp appended to its name.
Regards,
Gautam Purohit -
hi, is there a way to bounce with time stamp in logic? can logic automatically put time stamped files in the right place in the arrange window?
thx, wHi, Acmarie.
Thank you for visiting Apple Support Communities.
To see what time a message was sent or received. Drag any bubble to the left. Below, I have included the user guide which references this new feature on page 66.
iPhone User Guide
Cheers,
Jason H. -
Hii,
I have an issue with using where clause with time stamp. My requirement is to
select * from driver_on_policy
where last_change_datetime = '2001-03-06 19:00:06'
date is in this form 6/3/2001 7:00:06 PM
thnks
samIf you want to use '6/3/2001 7:00:06 PM', then
where last_change_datetime = to_timestamp('6/3/2001 7:00:06 PM','DD/MM/YYYY HH:MI:SS PM')If you can use a literal string in ANSI standard YYYY-MM-DD HH24:MI:SS format, then just
where last_change_datetime = timestamp '2001-03-06 19:00:06' (That 'DD/MM' might need to be switched around to 'MM/DD' if you are in America.)
Message was edited by:
William Robertson -
Can someone help with a previous post labeled "Writing to a data file with time stamp - Help! "
Can someone possibly help with a previous post labeled "Writing to a data file with time stamp - Help! "
Thankswhats the problem?
Aquaphire
---USING LABVIEW 6.1--- -
IDOC number should be passed with Time stamp
Here the scenario is IDOC to File.
Currently I am getting the date and time stamp but I want to pass the IDOC number after the torr_asn_20080522-010137-257.txt
torr_asn_?_20080522-010137-257.txt
Here in place of question mark I want to pass the IDOC number and how to pass
Let me know quickly as the issue is very urgent.
Points will be awarded.Hi Arjya,
If your requirement is to create , the file name dynamically for your receiver file adapter, you can do so using your FILE ADAPTER CONFIGURATION itself, and need not go for any JAVA Mappping / Java Code at all.
*The dynamic filename generation concept is as follows.8
In your filename field in the receiver file adapter, just give a variable with % symbols. (eg: %file% ).
Now, under the option Variable Name Substitution, you can give how the value has to be created.
It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
For the former, your give
message:interface_name ,etc
and for the payload part you give,
Payload: "your element root which u wanna acecss"
Just check this link out,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
And read the contents under variable substitution and it will help you understand the concepts better.
Also, in your FILE Adapter under the option FILE CREATION MODE, you have options like,
1.Add Counter,
2. Append
3. Create
4. Add Time Stamp
Reward points if this helps
Regards
Pragathi. -
Can't show 7PM with Time Stamp Control
Maybe it's just me, but I can't seem to get any time stamp controls to accept 7PM as an entry.
....this is kind of a problem for the data entry I'm supposed to be doing this weekend.
Any workaround?
Patrick AllenThanks for the reply Guenter.
It's very strange. Even after shutting down LabVIEW and starting with an entirely new VI, the time stamp control always displays 00:00:00 when I try to enter 7PM.
I've tried changing the defaults to just about everything. But it's always the same behavior.
For my work around I decided to just use Excel for all my raw data entry. I'll write program to stuff it all in the database later.
*edit*
I just downloaded the attachment on your reply.....and it worked just fine.
I'm uploading the entire .vi now. This is bizare.
Message Edited by pallen on 10-03-2009 05:44 PM
Patrick Allen
Attachments:
time stamp weirdness.vi 6 KB -
Watermarking program with time stamps?
Hi all,
Just curious to see if Acrobat Pro has a feature where I can add a watermark both at the top, bottom and middle-diagonal with name and timestamp of date opened/accessed or created. I've been looking all over and have only found a watermarking option but no time stamp feature.
Any help woudl be greatly appreciated, and I'm sorry if this is in the wrong subforum.
Thanks.Are you sure you want a watermark?
Reader cannot add the OCG watermark layer!
You can create watermarkFromText with JavaScript but you cannot update or remove a watermark with JavaScript.
You can create a string value of formatted date and time object from the system date time object.
So one could combine the create watermarkFromText and compute the text string for the date and time from the system date and time or form info creation date or modified date.
Have you considered using read only form fields?
Maybe you are looking for
-
IPhone 4S wont sync music after upgrading to iOS 7 on windows 7
After upgrading to iOS 7 on my iPhone 4S, I lost all my music. When I try and sync (USB) with iTunes 11.1 (on Windows 7) it hangs at the last step "waiting for changes to be applied" (step 5 of 5) i am looking for weeks for a solution to this problem
-
In my company abap engine is running but java stack services is no running
Hello experts, abap stack is running but java stack is not running give me the solution
-
Yet another "AdfFacesFilter has not been installed" problem
Hi, I'm getting the following warning: WARNING: The AdfFacesFilter has not been installed. ADF Faces requires this filter for proper execution. I've read a bunch of threads on this warning but none of them helped me resolve the warning in my case and
-
Customized error messages and error handling?
Hi All , how can we Customized error messages? and how we can do error handling in Sibel Analytics ?
-
Photoshop CS5 fails to open pdfs
Photoshop CS5 fails to open some pdfs created in Indesign. The message 'Could not complete your request because of a program error' comes up. Is this posibly a system issue not seeing the file information or a fault in photoshop.