Camcorders compatible with the OS X 10.9.3?

Can someone tell me what camcorders are compatible with the OS X 10.9.3?

hahawow wrote:
I just bought a brand new Lynksys N600 wireless router today and came home to install it. I put in the set up CD and it informed me that the software doesn't support my operating system, which is weird because I have the latest OS. So I hopped on forums and found out that everyone had similar problems and apparently no Lynksys routers are compatible with the Maverick OS. This seems like a horrific oversight of such a huge company. Plus, many of the posts I was reading were in October of 2013 when OS X 10.9 was released and they STILL haven't fixed the issue? A fresh brand new CD and router STILL won't work with one of the biggest platforms in the world? Almost 9 months later? I found some other threads on this same issue with people that had terrible customer service experiences trying to deal with overseas support and then only being issued a refurbished router even though theirs was defective out of the box. Basically what I'm getting at is apparently Lynksys is **bleep** and has terrible customer service. I mean, if they can't fix something so gigantic in 9 months, clearly something is terribly wrong. Some people have found solutions and ways around this issue but ya know what I think? I think I shouldn't have to do any round about ways to get my brand new router to work. I think I should be able to plug it in and go, none of this temporary hodgepodge troubleshooting **bleep**. So instead of wasting my time, I'm going to go return this one and buy a router from a company that doesn't suck, and I suggest you do too. I'll never buy another Lynksys product again!
Try to set up the router using a web browser at 192.168.1.1...The CD might not be needed.

Similar Messages

Looking for a sports video camera that is compatible with the mac

Looking for a video camera that can record sports well and is also compatible with the mac. I've been using iMovie to edit videos for a highlight reel of my highschool soccer games that I coach.

I like Sony HD MiniDV (HDV) Handycam Camcorder - HDRFX1000, but I have also used several older Sony (DCR-TRV17 and DCR-TRV70) and Canon (VIXIA HV20, VIXIA HV30, and VIXIA HV40) tape-based Firewire-equipped camcorders with good results.
I prefer tape-based Firewire-equipped cameras because of their IEEE 1394 transfer speed, compatibility with iMovie HD, and ability to serve as the source recording directly into iMovie when desired. If none of these characteristics is important to you, other Mac-compatible camcorders with suitable zoom ranges and lens speeds for the light levels you encounter should also do nicely for recording at your games.
You do not say which iMovie version you are using, but you can find about known compatible camcorders by searching for the info in a search like this one.
Message was edited by: EZ Jim
Mac OSX 10.9

Ibook 500mhz AV cable its compatible with the iPod AV cable?

Last Sunday i've found an old cable from my old ibook 500mhz: http://www.mac-pro.com/s.nl/sc.2/category.114/it.A/id.1383/.f
Do you think it will be compatible with the ipod video that im waiting? (yes, because im from portugal and need to wait a lot for all the new mac products...)
the jeck 3.5 connection seems very similar.
Thanks a lot.
Ricardo

Ricardo
No the jack is wired differently :
http://www.tuaw.com/2005/11/01/how-to-convert-an-ibook-av-cable-to-an-ipod-av-ca ble/
If you are prepared to cannibalise the cable you can get it to work but it's not as tidy as the Apple supplied cable.
Generic A/V cables may work if you get the RCAs in the right place, e.g. cables suitable for Sony camcorders work if you swap the Video (Yellow) and Right Audio (Red).
I think that's what the previous poster was referring to.
regards
Brian

What battery is compatible with the Panasonic PV-GS85 Camcorder?

The battery that it came with is now busted and won't hold a charge for more than a few minutes (It had a good few years in it though, of me dropping it and what not.)
So I'm shopping for a new battery. I found a battery on radioshack's website that says it's compatible with my camcorder, and it replaces the Panasonic CGR-DU06 battery, that I bought it with. But I don't know about it, and I would prefer to be able to just pick a battery up at best buy, or anywhere really, in order to have it by this Saturday.
I found lots of batteries on the best buy website that say they're compatible with different Panasonic camcorders, but they all say "including" so I assume it's not limited to just the camcorders listed in the description, but none of them actually list my particular camcorder. Here's some links to some of the ones that may be compatible, but I just don't know for sure.
http://www.bestbuy.com/site/Lenmar+-+Lithium-Ion+Battery+for+Select+Hitachi+and+Panasonic+Camcorders...
http://www.bestbuy.com/site/Lenmar+-+Lithium-Ion+Battery+for+Select+Digital+Cameras+and+Camcorders/9...
http://www.bestbuy.com/site/Panasonic+-+Rechargeable+Lithium-Ion+Battery/9771987.p?id=1218170519598&...
http://www.bestbuy.com/site/Panasonic+-+Rechargeable+Lithium-Ion+Battery/9771996.p?id=1218170523502&...
http://www.bestbuy.com/site/Panasonic+-+High-Capacity+Lithium-Ion+Battery+for+Select+Panasonic+Camco...
http://www.bestbuy.com/site/Lenmar+-+Nickel-Metal+Hydride+Battery+for+Select+Camcorders/9343579.p?id...
http://www.bestbuy.com/site/Lenmar+-+Nickel-Metal+Hydride+Battery/9876972.p?id=1218187480668&skuId=9...
http://www.bestbuy.com/site/Lenmar+-+Lithium-Ion+Battery+for+Select+Panasonic+Camcorders/1407185.p?i...
http://www.bestbuy.com/site/Lenmar+-+Lithium-Ion+Battery+for+Select+Panasonic+Camcorders/9345121.p?i...
http://www.bestbuy.com/site/Lenmar+-+Lithium-Ion+Battery/9877404.p?id=1218187479894&skuId=9877404
http://www.bestbuy.com/site/Lenmar+-+Sealed+Lead+Acid+Battery/9877326.p?id=1218187477376&skuId=98773...

Hi xpollypocketx,
I truly apologize for the delay in my response to this, and I'm sure that you have gotten your new battery by now. If you are still in need of a replacement battery for this camcorder we don't actually sell the proprietary Panasonic battery, but we do sell two models that are compatible with this camcorder made by Lenmar. The Lenmar model LIZ304P and model LIZ305P are compatible with the Panasonic PV-GS85 camcorder. The basic difference between the two batteries is that model LIZ304P is a 1320mAh Lithium Ion battery pack, while model LIZ305P is a 2500mAh Lithium Ion battery; the more mAh's a battery has the longer it will hold a charge.
Lenmar Lithium-Ion Battery for Select Panasonic Camcorders
Model: Liz305p | SKU: 1407185
Keep your camcorder charged with this lithium-ion battery that is compatible with select Panasonic camcorders and features 7.4V of power and a 2500 mAh rating for long-lasting use.
Read reviews (0)
Sale: $59.99
Lenmar Lithium-Ion Battery for Select Panasonic Camcorders
Model: Liz304p | SKU: 1407158
Power your camcorder with this lithium-ion battery that is compatible with select Panasonic camcorders and features 7.4V of power and a 1320 mAh rating for long-lasting use.
Read reviews (0)
Sale: $49.99
I hope this helps!
Allan|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Where can I find a list of Camcorders compatible with FCP X?

Where can I find a list of Camcorders compatible with FCP X?

I'll modify that first word!
http://help.apple.com/finalcutpro/cameras/en/index.html?
However, be aware that Apple has neither the time nor the incentive to test every camera on the market, so there will be many more models, old and new, that will work perfectly even though they are not on the database.

Content Tab: None of the fact tables are compatible with the query request

Hi All,
**One thing I am not clear yet of all my years with OBIEE is working with the content tab in BMM.**
I have made a rpd the joins in physical layer as shown below:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056545119428530
And the BMM layer as:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056519553812930
Error I am getting when i run a request from the 3 columns from the selected 3 tables is:
Dim - Comment Code Details
Fact - Complaint
Dim - Service Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14020] None of the fact tables are compatible with the query request Sr Num:[DAggr(Fact - Complaint.Sr Num by [ Dim - Service Details.Sr Cat Type Cd, Dim - Comment Code Details.Cmtcode name] )]. (HY000).
I get no error for consistency.. I read everywhere and I know i need to set the appropriate aggregation levels in the various dims and facts LTS properties to help OBIEE understanding our model, but how to do that.. how do i decide... how should I approach, what should be the aggregation level, what details.
When i click More button i see different options: Copy, Copy From, Get Levels, Check Level, what do these mean.
Aggregation Content, group by - Logical Level or Column which one should i choose and how should I decide.
Can anyone explain the Content Tab in details and from scratch with some example and why we get these errors.... I know many people who are well versed with many other things related to RPD but this. A little efforts of explaining from you guys will really be appreciated.
Thanks in advance,
Dev

Hi Deepak,
Option 1:
My tables in physical layer are joined as below:
D1--> F1 <--D2--> F2 <--D3
Same way i model it in BMM
D1--> F1 <-- D2--> F2 <--D3
Here D1 is non Conformed Dimension for F2 and D3 is non Conformed dim for F1. Later create Dimensional hierarchies, I tried setting up the content levels
I go Sources>content tab of Fact F1 I set
Dimensions----------- Logical level
D1---------------------- D1 Detail
D2---------------------- D2 Detail
D3---------------------- D3 Total
then, I go Sources>content tab of Fact F2 I set
Dimensions----------- Logical level
D1---------------------- D1 Total
D2---------------------- D2 Detail
D3---------------------- D3 Detail
Then, I also go in all the dimensions and set their content levels to Details, but it still gives me errors not sure where I am going wrong in setting the content levels.
I need to know whether the way I have modeled it in BMM is right,
Option 2:
I can combine the two facts in a single Logical Fact or the above design should also work.
(F1&F2)<--D1, D2 , D3 joined separately using complex logical joins.
what will be the content tab details?
Thanks,
Dev

Bridge CC no compatible with the new After Effects CC 2014 ?

Hi, I'm updating the Adobe suite (CC 2014) .but After Effects CC 2014 no longer works with the old Bridge CC (there is no update of Bridge). Since "browse presets" in After Effects when choosing a preset (dissolves etc) there is an error message:
"After Effects error: can not import file" Entries lum.-marq.calque.ffx "unsupportedfiletype or extension (0 :: 1). With all presets.
I tried on other computers with other adobe updated it makes such licenses except with the old version of adobe after effects (after CC effects) I tried too to change language of Bridge and After effects (beharps this is a langage compatibility problem) but the problem is the same.
So I think the new version after effects CC 2014 is not compatible with the presets adobe bridge CC ??
How can I do? I have to go through the old version of after to apply a preset Bridge? I can not even download it in cloud creativ ... there is only the new version of after effects...

You need to ask in Community: Premiere Pro | Adobe Community but do not expect Adobe to discuss future plans
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for bug reports or feature requests
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
Also, this is an OPEN forum, not Adobe support... please do not post personal information

I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

Office 2011 is not compatbile with Exchange 2003.
I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac

TS4036 I've got a new iPad I'm trying to do an iCloud back up but keep being given the following message: no iCloud backups are compatible with the version of iOS (6.1.3) on this iPad. How do I restore I cloud on my new device?

I've got a new iPad and am trying to do an iCloud backup but keep getting the following message: no iCloud backups are compatible with the version of iOS (6.1.3) on this iPad.
How do I restore info from iCloud onto my new device?

You would have to update your device first, before you can restore your iPad from your backup. Resolution: set it up as anew device, then update your device to the latest version "Settings > General > Updates", then reset your device again "Settings > General > Reset > Erase All Content and Settings" and then after the iPad restarts again, choose to restore your device from your backup.

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks :)

When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks

Let's first try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

Error :"The provider is not compatible with the version of Oracle client"

Hi guys!
I'm facing this problem:
When my .Net application tries to access the DB, I get this error message above.
The application is into the same machine of DB and the operational system is Windows Server Enterprise 64 bits.
I'm comparing to another machine that has the same scenario but runs in Windows Vista 64 bits. This problem doesn't happen and I can normally access the DB.
The both database versions are 10g Release 2 (10.2) and all components from Oracle Database Components 10.2.0.2.21 are installed as the containing bellow:
-Oracle Data Provider for .NET 1.x 10.2.0.2.20
-Oracle Data Provider for .NET 2.0 10.2.0.2.20
-Oracle Developer Tools for Visual Studio .NET 2003 10.2.0.2.20
-Oracle Developer Tools for Visual Studio 2005 10.2.0.2.20
-Oracle Provider for OLE DB 10.2.0.2.20
-Oracle Objects for OLE 10.2.0.2.20
-Oracle Services For Microsoft Transaction Server 10.2.0.1.0
-Oracle Net 10.2.0.1.0
-Oracle Universal Installer 10.2.0.2.0
Oracle.DataAcces.DLL is 2.102.2.20 and it is reference in my .Net app (that is published and located into IIS).
These are the Oracle assemblies installes in 'C:\Windows\Assembly':
Windows Vista Machine:
ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
Oracle.Management.Omo 2.102.2.20 Neutral 89b483f429c47342 x86
Oracle.VsDevTools 2.102.2.20 Neutral 89b483f429c47342 x86
Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Windows Server Machine:
ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Oracle.DataAccess 2.102.2.20 Neutral 89b483f429c47342 x86
Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 zh-CHT 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 zh-CHS 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 ko 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 jp 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.9.2.Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Policy.9.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
What should I check and do to solve this problems?
Thanks for help,
Anderson

Hi,
Often the error "The provider is not compatible with the version of Oracle client" is raised when the unmanaged dll OraOpsX.dll can't be found, can't be loaded, or is the wrong version. For version 10.2.0.x of ODP.NET and .NET Framework 2.x the file should be called "OraOps10w.dll" and should be found in the %ORACLE_HOME%\bin directory.
Since the ODAC pieces are installed on the same host as the database, are they in a separate Oracle Home or the same Oracle Home as the database software? If there are multiple Oracle Home directories, which one is in the system path first?
I would start with verifying the version of OraOps10w.dll and the system path on the server. You might also confirm that the Oracle Home directory (and everything under it) has the following permissions for Authenticated Users:
- Read & Execute
- List folder contents
- Read
Regards,
Mark

The provider is not compatible with the version of Oracle client

We are running Server 2012 64 bit with multiple homes one is 32 bit and the other 64 bit. We installed the 64 bit first then the 32 bit next in order to get our Classic ASP WebSite that is using COM+ and OLEDB to see the provider.
C:\oracle\product\12.1.0\x86
C:\oracle\product\12.1.0\x64
The other Websites are ASP.Net 4.0 and are running in 64 bit application pools. They are using a DAL .Net assembly built x64 with a reference to the 64 bit ODP.Net version 4.121.1.0 in C:\oracle\product\12.1.0\X64\client_1\odp.net\bin\4.
I also see there is another folder C:\oracle\product\12.1.0\X64\odac_1\odp.net\bin\2.x with version 2.121.2.0. We are on running Framework 4.0 but when I switch to this version it works but with the version out of the bid\4 we are receiving the following error when the 64 bit Websites call the assembly:
The provider is not compatible with the version of Oracle client
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Oracle.DataAccess.Client.OracleException: The provider is not compatible with the version of Oracle client
Source Error:
Line 87: mDataSource = dataSource
Line 88: mConnectionString = GetDBConnectionString(dataSource)
Line 89: mConnection = New OracleConnection(mConnectionString)
Line 90: mParams = New List(Of IDbDataParameter)
Line 91: End Sub
I have not been successful in getting this to work after spending endless hours, so any help would be appreciated.

Hi,
Oracle Client/ODP build with certified Visual C++ Libraries so application using ODP.NET requires "runtime components of Visual C++ Libraries" to be installed.
Oracle Database Client installation includes the Visual C++ Libraries but ODAC doesn't contain these libraries which may cause such issue.
Please check the Note 43208.1 for the particular version of Visual C++ installs with Oracle Database Client installation(e.g. 11.2.0 Database Client installs Visual C++ .NET 2005) and also you can refer the windows event log error massage to verify which version of Visual C++ is missing.
thanks and regards
Venkat

Help!!! (CrystalDecisions.Web.CrystalReportViewer) is not compatible with the type of control (CrystalDecisions.Web.CrystalReportViewer)

Post Author: mrmc
CA Forum: General
Hi all,
Recently, I got problem on using cystal report on asp.net web. the error msg is:
Parser Error Message: The base class includes the field 'viewer', but its type (CrystalDecisions.Web.CrystalReportViewer) is not compatible with the type of control (CrystalDecisions.Web.CrystalReportViewer).
in the code:
<%@ Register TagPrefix="ce" Namespace="CrystalDecisions.Enterprise.WebControls" Assembly="CrystalDecisions.Enterprise.Web, Version=11.0.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" %>
<CR:CrystalReportViewer id="viewer" runat="server" AutoDataBind="true" HasCrystalLogo="False" Width="350px" Height="50px" HasToggleGroupTreeButton="False" DisplayGroupTree="False" HasGotoPageButton="False" HasRefreshButton="True" DisplayToolbar="False"></CR:CrystalReportViewer>
In web.config
<add assembly="CrystalDecisions.Web, Version=11.0.3300.0, Culture=neutral, PublicKeyToken=1234567890"/>
the server contains crytal report 9 (come from .net studio) and crytal report 11 (installed standalone).
I googled this problem, it seems a lot of people got this problem but no solution...
could anyone help me? Thanks!

Post Author: david.wilkes
CA Forum: General
You might try Removing the Reference and re-adding the reference. That seemed to get me pass this error, but I ran into another error that I have not figured out yet.

Provider is not compatible with the client

Hi,
I'm new to this forum so I don't know if this prob was already posted.
It might be something that i misunderstood.
My application VB.NET is connecting to Oracle 10g database.
Using client from the ODAC 10.2.0.2.21 installation file.
DB version is 10.2.0.1.0
Even before connection is open application throws an exception:
The provider is not compatible with the version of Oracle client at Oracle.DataAccess.Client.OracleInit.Initialize()
Any ideas?
Thanks for help ;O)
Nice day to everybody.
Renata Belakova

Thanks
1, I'm developing an application on Win 2003 Server with Ora10g DB 10.2.0.1.0
2, I developed an application in VS.NET 2005, VB.NET
3, Application works OK on develop. PC
4, my PC name, IP and DB name are the same as customers
5, i published application and went to install it on customers PC
I was thinking about the same environment on developing and customer PCs.
then i went to customer to try application on their LAN
1, They have DB server with the same version of DB and the same name of DB and the same name of server as i got
2, firstly I've installed ora client on customer computer not server
I've used ODTwithODAC1020221.exe file and installed client part
3, set up listener on clients comp
4, installed .net application on this client comp
5, run and got exception i wrote in previous message
Im really not an Oracle professional. I'm a .NET developer but fist time in my life developing application under Oracle DB (mostly was using Microsoft SQL ...)
So I don't know if these steps were OK .... but it's what i've read.
Thanx ...

Camcorders compatible with the OS X 10.9.3?

Similar Messages

Maybe you are looking for