Camera and display is not good

Hi im new here i buy my sony like a week ago and i think i have do a mistage beacuse why the sony say its the best smartphone and things just look the display its like TFT screen its budget and the camera okej sure its 20.7 megapixel but its not so good pictures iphone its better so lets do a update to the phone fix the camera and the display better :/ i hope its will be better if the 4.3 Jelly Bean comes out !
Solved!
Go to Solution.

Try adjusting to different modes when you are using the camera, explore all the camera features available in the phone.
For me, Sony Xperia Z1 provides me with one of the best camera for mobile.
I like taking photo with Single Auto Focus mode and in manual mode for near objects, or object not more than 2m.
It really depends on how you take a photo. If not, just use Superior Auto.
Besides, the screen had a lot of improvements over the predecessor, xperia Z.

Similar Messages

How to Snap/Grab Image from 1394 camera and display the Image in CWIMAQVIEWER in VC++ ?

Hi,
I have : - IMAQ1394 2.0.1
              - NI Vision 7.1
In VB, I can Snap/Grab Image from 1394 camera and display the Image in CWIMAQVIEWER :
    Dim Image0 As New CWIMAQImage
    imaq1394SnapCW(sid0,Image0)
    CWIMAQViewer1.Attach Image0
Now,How can I do this in VC++6.0?
    I tried:
              C_CWIMAQImage m_imgViewer1;
              m_imgViewer1 = m_CWIMAQVision1.CreateCWIMAQImage();
              m_CWIMAQViewer1.Attach(m_imgViewer1);
              imaq1394SnapCW(Sid,m_imgViewer1); <--there is no "imaq1394SnapCW "function in VC++,why?
    Please help me!
    Thank you!

For people looking back at these old posts regarding
CWIMAQViewer - it was not made to be used in the C environments and is made
for VB.
Refer to the following locations for displaying images in C
environments:
Start»All Programs»National Instruments»Vision»Documentation
Start»All
Programs»National Instruments»Vision»Text Based Examples
Make
sure that you look at the examples and documentation that is in
reference to the C environments not the VB environments
Vince M
Applications Engineer

How to capture an image from my usb camera and display on my front panel

How to capture an image from my usb camera and display on my front panel

Install NI Vision Acquisition Software and NI IMAQ for USB and open an example.
Christian

My iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display :( please advise me a corrective action...

my iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display please advise me a corrective action...

Take it to an Apple Store and see about getting an out of warranty replacement. I believe it will run you about $150.

Camera and flashlight does not work

My camera and flashlight will not work after the ios 7 upgrade. I have rebootd and completely wiped out my iPhone and still no camera or flashlight. I have seen where others are having the same problem but no answers.

I had the same problem it's definitely a software issue because the camera would sometimes work in camera apps but now I could not switch cameras at all.
I may have found a solution of course I probably won't get credit for thanks to Apple.
I believe the problem arises from a bug when the camera is used in lock mode, try restarting your phone with the home and power button. Then open your camera in locked mode and set the flash to auto. Maybe take a few pictures, switch the camera back and fourth, turn HDR on and off, but make sure the flash is set to auto before you unlock the phone. Heck even try playing with the flashlight.
After I did this in locked mode to my surprise my camera and flashlight are now fully functional after I have unlocked it with the password. I'm not to sure what triggered this bug but when I first got iOS 7 and played with my phone some how I unlocked the lock screen without putting in a password. Just by using the camera and the notification and control Center, I unlocked the phone which might of triggered the bug.

HT1420 No longer authorized to enter the account was used to five devices have exhausted all attempts to please you to the solution to this problem I reside in recursion and I'm not good at English Language

No longer authorized to enter the account was used to five devices have exhausted all attempts to please you to the solution to this problem I reside in recursion and I'm not good at English Language

MMS will be available for the 3G and 3GS in two weeks - on Friday, September 25th - likely with a carrier update made available via iTunes.
In the interim - for the next two weeks, ask the sender of an MMS to address the MMS to an email address that you access with the iPhone's Mail client - the sender will enter your email address in the To: field for the MMS instead of your cell phone number with area code. The MMS will be received by you as an email with the photo as an attachment. This will give you the sender's cell phone MMS email address. Add this email address to the contact's info in your iPhone's address book. If you want to send an email with a photo attached as an MMS to this person, address the email to their cell phone MMS email address. The email with the photo attached will be received as an MMS.
This will be required for another two weeks.

Satellite S70-A-11H web camera image quality is not good

Hi,
Running windows 8.1 which came with the laptop.
New out of the box.
As per title.
I find the image quality of the camera image to be very grainy, poor color etc.
When I start the web camera using the search bar on the right, it starts using the Microsoft application, when you scroll down to settings all that is available under settings/options is Photo aspect ratio, Grid lines, Location info.
I have been in touch with Toshiba Tech support who advised to do a Laptop refresh, which I did.
This made no difference.
After which they asked me to find the Toshiba web camera application on the laptop, this should have been in the Program Files folder in the Toshiba folder.
This application does not exist on my laptop.
The tech checked the same model laptop that he had available, which I was told when he selected the web camera, it opened using the Toshiba Web camera application, not Microsoft.
I have looked at other Toshiba laptops with web cameras, and found the image quality to be better. Unable to get to settings as these laptops were on display and in demo mode, hence locked down to some extent.
I can't believe that a web camera in this day and age for this value of laptop to have such poor image quality. My digital camera from 10year ago has better image quality.
I have checked through the laptop, and I do not have this application installed.
I have checked for updated drivers and software for my laptop, and cannot find this application to be applicable for my laptop. Drivers etc appear to be up to date.
I would like to know, do other users of this S series have any issue of camera image quality.
When the camera is selected what application is being used, Toshiba or Microsoft.
Is Toshiba web camera application applicable to Windows 8.1, as I cannot see it listed for 8.1
Does this sound like a hardware fault or a application/software issue.
Any direction or help on this matter would be appreciated, as I am getting to the point of returning this laptop for a refund.
Thanks in advance.
D.
Yes, I have tried using the FORCE!

> The tech checked the same model laptop that he had available, which I was told when he selected the web camera, it opened using the Toshiba Web camera application, not Microsoft.
The Toshiba webcam application is available for Win 7 system but the Win 8 and Windows 8.1 system use the own Microsoft webcam application.
> I have looked at other Toshiba laptops with web cameras, and found the image quality to be better.
Different Toshiba notebooks are equipped with different webcams.
Satellite S70-A-11H was equipped with a *0.92 mega pixel webcam*
A Satellite A660 for example was equipped with an _1.3M mega pixel webcam_
So there is a difference in webcam resolution

Adding Office causes MDT to stop at sysprep and display "Can not find c:\LTIBootStrap.vbs"

I'm new to MDT. I can use the standard TS template to install, sysprep and capture a vanilla Windows 8.1 to an image and deploy that image to a new computer. No problem.
I added MS Office 2013 as an application. If try to add Office 2013 to the reference image, by selecting it in the setup wizard, MDT stops at the sysprep stage, the reference machine reboots, goes through the "we are setting thing up for you...",
then displays "Can not find LTIBootStrap.vbs".
I'm using a Generation 2 VM for the reference image, with the x64 boot iso media. The only way to start it is to change the boot order from file "bootmgfw.efi" back to the .iso. The capture stage then continues. The captured image
then seems to be corrupt as the local list is blank so the deployment cannot continue.
Why does installing Office 2013 to the reference image cause this problem? Vanilla OS images don't have this problem. What am I doing wrong? I'm quite new to MDT but can't find an answer to this.
Thanks.

I am running into the same error. Win 8.1 build 9600 ISO install to a gen 2 VM. Office 2013 32 bit. I can get the TS to run all the way through and capture if I leave windows updates off in the TS. As soon as I turn on the updates I get
the error (Can not find LTIBootStrap.vbs) at sysprep and capture stage. Good to know it worked for you on gen 1 VM. I am trying that now and will report.

Camera and led light not working after IOS 7 update on iphone 5 help please!!

After I installed the update my led light won't work for the flashlight and my camera doesn't work either. Only the front facing camera works. Any suggestions?

thanks for the suggestions, i tried the ideas you suggested but i dont even get a camera showing for the rear camera, i also noticed the torchlight no longer works. i did all the steps but no luck.
So I took my camera to the genius bar this weekend as well as walking through various steps with the apple guys in ohio support over the net.
With the guys at the genius bar, after i insisted that it must be software as the rear camera stopped working only after the softwre update, they continued to assure me it was hardware and talked me into letting them replace the camera, they then took it to the back and tried fixing a camera and 30 minutes later came out and said the rear camera is no longer being detected and wanted me to replace the motherboard for yet more money. im glad they didnt charge me for the new camera though as it still didnt work.
anyway the motherboard idea i rejected as it was just 2 months out of warranty and had only stopped working the day after the release of 7.0.2, so im going to wait until the next few releases to see what happens, as i dont believe for a second its hardware. i expected a stock answer from apple and its exactly what i got even after my explanation of how it was working the day before the release. not overly impressed with the whole process.
i wanted to back down to 7.0.1 to confirm the camera still works but they said no chance so i cant even see if it still works ouside 7.0.2. anyway will update if i get any further progress.

Camera and photo album not opening

Everything opens
camera will open then shut down, same with photo
i'm restoring the phone
tried initial restore, but same thing
now trying restore from itunes
and full backup
anyone experienced this shize ?
Hope it comes back
i use camera every day. . . shizer
So i'm freaking out a little here
crossing my fingers, plz pray for this dude
let u know inna tic, how it goes . . .

have tried full restore from itunes
zilch (nothing dude)
every thing worx excepot my camera and prize fotos, yet it can easily upload and delete
i'm not happy to know iy'm not lone because it shouldn't even be one of us with this like so irritating shizer problem, massive bug if u ask I
i'm going to my iphone store first thiing in the friggin morning
but i'm going to delete all 3rd partyy apps and try fresh
restore and remove all data start clean, u know what I mean ?
let u know the results
<Edited by Moderator>
wish i luck, what the luck

IPhone 4 camera and photo application not working!!

My iphone 4 camera and photo applications do not work anymore. When I tried to take a picture, the camera froze. I turned off my phone and when i turned it back on, the app will load, but when i tap to take the picture it returns to the home screen. The picture library application does the same thing. I try to load my picture library and when I tap to open it, it returns to the home screen.
I have tried turning it off and on multiple times and also turned it off for an extended period of time and it still doesn't work. Any suggestions on what the problem could be or possible ways to fix this would be greatly appreciated.

Tap Settings App>General>Reset, near bottom of list>Reset All Settings. If this does not help you could try a Restore with iTunes, and when asked at end Set Up as New. If this does not help and you have Warranty or AppleCare Coverage take iPhone to Apple for resolution.

Camera and photo import not working after update

after updating to 4.2.1, the camera and photo roll no longer works. Do not update. What a pain!

Welcome to the discussions,
did you try the basic troubleshooting?
-Reset the phone by holding the sleep and home button until the Apple logo comes back
-Delete the photo cache: http://support.apple.com/kb/TS1314

Back camera and power buton not working

hello dear ,
i have problem in my i phone 4,s camera and power buton . how can i replace it

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If this does not resolve the issues, take the device to Apple for evaluation and possible replacement.

Why is my camera and ipod touch not connecting to my macbook pro?

My computer is not recognizing my camera and ipod are connected by the usb cable. But when I connect a usb memory stick it does come up on the desktop. Originally when I bought the computer in May 2011 the ipod touch did work. I am wondering if I accidentally touched something to make it not work and how I can fix it to make it work again.

Please detail all you have done to resolve your issue. Need this information so that the users can avoid the "been there, done that" scenario type responses. This is to avoid repeating the troubleshooting you may have already tried. Thank you.
Have you tried any of the following?
http://support.apple.com/kb/HT1411 Apple Portables: Resetting the System Management Controller (SMC)
http://docs.info.apple.com/article.html?artnum=2238 Resetting your Mac's PRAM and NVRAM

My ipad has been disabled and when connected to the pc it is recognized as a camera and it does not appear under itunes devices,really want to get it abled how do i tackle this?

my ipad haas been disabled and whe connected to the computer it is recognised as a camera,plus it does not appear under itunes devices,i really want to get it working,what is the solution to this,thanks in advance

Hello popsicles,
This first article should be helpful in getting iTunes to recognize your iPad once more:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the device is still disabled once it's appeared in iTunes again, please reference this second article:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Cheers,
Allen

Camera and display is not good

Similar Messages

Maybe you are looking for