Camera app only shows still camera option. Video option is gone

The iphone 4 camera app intermittently would not open. Now the video option does not show at all. Still takes photos but no way to get to video mode.
And the answer is?
John

And the answer is?
Like most other problems, do the basic troubleshooting steps described in the User Guide:
Restart phone
Reset phone
Restore in iTunes using a backup
Restore in iTunes as new, without using a backup
If restoring as new doesn't help, there is a hardware failure that needs warranty service from Apple.
If your phone has EVER been jailbroken, all bets are off...
Message was edited by: modular747

Similar Messages

  • Apple TV YouTube app only shows limited amount of videos on subscribed channels

    I noticed that when using the YouTube app on the Apple TV 3 I only get a small selection of videos to watch on subscribed YouTube channels. Not sure if this is due to a limitation or a setting that I didn't check but it's rather annoying.
    My workaround at the moment is to use Airplay to watch the videos that aren't showing up. Shouldn't have to do this in my honest opinion.
    Really want to know if this is normal or something that I can fix.
    Thanks.

    youtube works that way
    it's a place where users like you can me get to upload videos
    youtube remove things they find  inappropriate but they can only review soo many a min
    use the parental setting to block youtube case solved
    better block it on computers too because it's the same deal

  • I recently purchased a video from the itunes store and successfully downloaded it to my ipad2. After syncing my ipad , the movie was lost and Videos App only shows Rentals, Podcasts, Music Videos, what happened to my purchased videos, please help

    I recently purchased two videos from the itunes store. I downlooaded them both successfully to my ipad2 Videos App, the next time I synced the ipad the Movies title was erased and the remaing titles: Rentals Podcasts & Music Videos were left, what happed to the Movies title? I am now getting a message saying (my ipad does not support movies I purchased) anyone else experiencing this problem, any suggestions?
    don2skis

    There is a few events where I could see this happening...
    It's possible if you computer is not authorized with your iTunes Store account it may not have transfered your purchases from the iPad to the computer. To check, Open iTunes> Select the "Store" menu along top of the program and select Authorize this computer. Sign in with your AppleID and password, this will make sure your computer is authorized for the future so you can transfer purchases from your device.
    http://support.apple.com/kb/HT1848
    However, if your Movies are missing now you'll need to request to redownload or "regrant" them. Please send an email ticket into iTunes Store via...
    http://www.apple.com/support/itunes/
    Select "Video Purchases" in the grey boxes, then "Lost or Missing Items", then click the link to "Email Us" on the right. Fill out that form and the folks at the iTunes Store should get back to you less than 24 hours.

  • Im trying to find my iPhone via iCloud but i does not show a map with its last know location. It only shows the menu options. My iPad and Mac show up but the map of my iPhone does not.

    Im trying to find my iPhone via iCloud but i does not show a map with its last know location. It only shows the menu options. My iPad and Mac show up but the map of my iPhone does not. Can anyone help?

    If your phone is turned off or not connected to the Internet, you will be unable to locate it. Last known location is only stored for 24 hours.

  • I have updated my phone to iOS 8.2 and i m new to using iPhone. Whenever i am trying to open my iTunes store, its only showing me the option to open the iTunesU store. Can anyone help me with that?

    I have updated my phone to iOS 8.2 and i m new to using iPhone. Whenever i am trying to open my iTunes store, its only showing me the option to open the iTunesU store. Can anyone help me with that?

    Unfortunately Pakistan is one of those countries where media isn't available from iTunes - when that might change we won't know (we are fellow users on here) until if/when Apple announce something.
    Are there other music purchase download sites available there ? Or you can copy your CDs via your computer's iTunes and sync them to your phone

  • I have a mac book pro and when I turned on iChat it would not let me video chat with more then one person even though I was able to in the past. It only showed an icon to video chat with one person. Please help!!

    I have a mac book pro and when I turned on iChat it would not let me video chat with more then one person even though I was able to in the past. It only showed an icon to video chat with one person. Please help!!!! ASAP

    Hi,
    Check the iChat Menu > Preferences > Video Section > Bandwidth setting.
    iChat needs to see a Minimum of 128kbps to do 1-1 chats in Video
    For 3 and 4 way chats it needs 384kbps
    Set the Bandwidth to 500kbps if it is set lower.
    Also check the speed you are getting from your Internet supplier.
    9:28 PM      Thursday; February 23, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • My app only shows splash screen...

    Hello,
    my application only shows the splash screen and then,,, nothing....
    my app: [http://freiheit.hostse.com/sir.html]
    I've already googled and I didn't find anything :(
    Thanks for your help in advance

    Hi,
    Can you please tell me what was the exact problem area. I am facing same problem with my application. I can run this application successfullly on other machines but on my machine not able to get screen.

  • Import from Contour+2 only show first frame of video?!?!?

    Hi All,
    I just got a new Contour+2, and make sure to update the firmware, or FCPX will only show the first frame from the video and no audio.

    Hi Barry,
    You don't need any conversion!
    Simply import the media. If you do multicam, you might wanna transcode to Proxy for faster access..
    But correct with the old videos, they might need a transcode..

  • I updated to the new firefox. but now the show all bookmarks option is gone.. how do i get it back?

    how do i get the show all bookmarks option back?

    For me, the option to show all bookmarks now appears at the bottom of the bookmarks listed after I click on the bookmarks icon.

  • Library only showing one project.  ALL others are gone.  I exported one folder to external drive and now ALL projects are gone from Aperture library.  WHERE ARE THEY?  TIA

    I exported one folder to an external drive.  Now ALL my projects in Aperture are gone!  WHERE ARE THEY?  I've tried to rebuild and repair database.  It only shows the one project I had exported because I opened it in Finder back into Aperture.  HELP PLEASE!

    I found them.  Sorry, don't know how to delete post.

  • How can I add photos to my contacts? It only shows default, recent and video cam

    I will not find the way to add images to my contacs, Mountain Lion shows only default, recent and videocam

    You cannot.  this is how the iphone handles photos.
    ALL PHOTOS synced to iphone can be accessed via the "Photo Library".  Those same photos can also be accessed from the folders that you synced.  Just as you can find a book in your public library and you find the same book in the fiction section.
    Stop trying to resolve it as there is nothign to resolve.  All is working as it should.

  • External video doesn't play but only shows still frame (some times).

    When trying to view a clip or sequence on my external video monitor (NTSC via firewire through Sony converter box) and only for some of my projects, I cannot get the video to play. It displays a single frame and then updates when I stop playing a clip on the desktop. I've selected "all frames" in the External video option, but I cannot get it to play real time. This only happens with certain clips or sequences. Any ideas what's up?

    I've been having this same issue. I'm pretty sure it has to do with one of my sequence settings. I have no issues when I'm playing back an SD project but when I try to playback an HD project to an SD monitor I encounter thsi problem where it stays locked on the last frame I paused at. I'm using a Blackmagic Decklink Extreme HD and attempting to playback over composite.
    Thanks

  • AVI files loaded in Premier Elements 7 only show audio and not video.

    I am a new user of Premier Elements 7 and am having problems getting the video into a new project I set up. I have 6 AVI v1.0 clips that play both audio and video in Windows 7, but when I set up a project and import them, I only get the audio side and not the video side. I can drag the audio to the timeline and can play the audio just fine. But it is missing the video. I must be doing something wrong, but am new enough that I don't know where to turn.
    I have been reading the forums and taking tutorials, so I think I know the steps to import a video into PRE7. I've tried many things, but still no video. I downloaded GSpot and found that my files have video H264 (H.264/MPEG-4 AVC) and audio oxooo2 (ADPCM). The codecs seem to be installed on my Windows 7 computer.
    Can someone point me in the right direction on what to do next. I'm a computer professional with 50 years of experience, so am no dummy, but am new to PRE7. Thanks in advance.

    I found a mini-CD that came with the product. When I loaded it on my computer, one of the options was to install a device driver. I did this and now I can see the video in PRE7. So, I think this solves my problem.
    I applaud the mfgr. of the Insignia. This is the way that it should be with ALL cameras, that do not use a miniDV tape, or precise CODEC, that is mainstream. All too often, the mfgrs. tweak an existing CODEC, and just leave the customer hanging, trying to find a way to edit the footage. A couple of major mfgrs. come immediately to my mind.
    Others, who use CODEC's, like Xvid, that is so heavily compressed, that even converting it to an editable format/CODEC results in such horrible footage, that no one would ever be satisfied with the finished product.
    <Soapbox Mode Off>
    Glad that you are now up and editing. For my education, what does G-Spot say about the CODEC in the Insignia footage? At least next time that I encounter it, I can say - "look in the box, and install the driver to get the CODEC."
    Thanks for reporting,
    Hunt

  • IPhone 5 "places" map in photos app only showing very first photo taken.

    I got my iPhone 5 three days ago and have taken 20 something or so photos on the camera.  Location services is enabled for the camera and photos, yet the only photo showing up on the "places" map of the photo app is the very first photo I took, right after buying the phone.  I have no clue why none of the other photos are showing up in the places map & would appreciate any help making them all show up on the map. 

    mcytron [and Dhalberg]...
    Thank you, for posting this problem and the resolution.
    I have just returned from a two month 14,500km Kimberly's and Red Centre trip, and found to my absolute disappointment that all of my iPhone 5 photos had a horrid blueish tinge.
    a) by chance, I found when fiddling with iPhoto Edit that on the photos with this tinge, that the Revert to Original button was highlighted.
    Click on that button, and the photo colour profile was magically restored.
    b) OK, but how do I proceed now; select every photo, and select Edit, Revert to Original for every one?  I have 600 plus photos to fix.
    I began looking for a method of doing a Batch Change, which I have used in the past to adjust the time [and date] of photos imported from my wife Olympus SZ-14, and bingo, found the Photos, Revert to Original button in the top menu bar drop down.
    It worked a treat. I was able to select all the effected photos [in fact did a Ctlr a on the entire collection], and all 600 plus were restore in a few minutes, withthe click of one button.
    Phew...

  • Itunes shows still picture on video, but no video

    when playing a video that was downloaded via itunes it simply shows a "still shot" and does not show the video while playing. the Audio comes through fine. also, it plays fine on my itouch.
    any thoughts on how to get it to play on my itunes software??
    much thanks,
    JL

    If you are using remote speakers, deselect them and use the computer speakers only. Using remote speakers with video doesn't work because the delay transmitting the audio to the remote speakers puts the video and audio out of sync. Older versions of iTunes would automatically switch to computer only for playing videos. iTunes 8.0+ requires you to make the selection yourself.

Maybe you are looking for

  • Trackpad will not scroll imac

    I bought a new iMac last year and was busy so I didn't use it much. Along with a trackpad and a wireless mouse. The mouse works as expected however the trackpad will not scroll a Safari Window. It will scroll when connected to my 5 year old Macbook.

  • Need Oracle 10.2.0.1.0 Linux software

    I would like to down load Oracle 10.2.0.1.0 Linux software. Where would it be available?

  • CiscoWorks ANI server cannot connect, Joe Clark please help

    Joe, if you see this, please help I noticed yesterday I was getting some Java errors when opening different modules of Cisco Works, Campus Manager, RME. I rebooted the server and everything seemd to be working fine. I tried to set up Notification Ser

  • XI to MDM 5.5

    Hi, I need to send customers to MDM5.5 at an up coming customer. They will be sending out IDOCS and my understanding is that MDM reqires flat files. Is there any standard content available for MDM like there is for other SAP components that will hand

  • Facing syntax error in this simple code snippet

    select case when to_number (to_char(sysdate,'mm')) < 7 then (to_number(to_char(sysdate,'yyyy')) - 1) from dual --while if in block works fine declare year number; begin year := to_number(to_char(sysdate,'yyyy')); if (to_number(to_char(sysdate,'mm'))