Camera app pop up automaticall after ics update xperia s

After Updating to ICS my xperia s camera automatically popping up while i unlock the screen even try to dial a number before i can do any thing the camera application pop up very very upsetting indeed

Hello india286
Please use Pc companion in Repair mode to try to fix the installation:
Run the Pc companion Software
Turn the phone off and disconnect it from the computer
1. No matter what the program says do not connect the phone until you complete step 9
2. In the welcome screen if asked click on start, Next you will be shown what media go offers, click on "next" then you will see a presentation on what support zone offers, click on "Finish"
3. In the next section from "support zone" and "media go" new select "support zone"  and click on start.
4. On the next page select "Software update" and click on "start"
At this point if you get an error stating that "unable to install update components" or "server is busy" Please proceed to step 12
5. The program will say that there is no phone connected and will ask you to connect but disregard that and instead choose the option to "repair Phone".(the program will issue you a warning on the content that you will lose during the update)
6. Choose the option to continue.
7. After that, the program will download the necessary information (5 to 6 minutes) and it will present you with a list of phones.
8. Choose the Phone from the list (close to the bottom of the list)  click on the icon for the phone and then click on "next"
then you will see a new section telling you how to connect the phone. (don't connect it yet)
At this point the phone must be off and disconnected from the PC.
9. Connect the cable to the PC not to the phone, then follow the instructions on screen to connect the phone, if done correctly the program will say "the update of your phone has started..." (in some cases a message of  "Installing drivers" will appear before the message of "the update of your phone has started..."  is shown.)
10. If you failed to follow the steps correctly the phone will turn on and it will request that you "Proceed with the following steps, slide down the notification bar", If this happens disconnect the phone from the cable, turn it off and repeat from step 9).
11. If the PC Companion proceeds correctly wait for the update to finish and follow instructions on screen.
Dear customer,
12. If "unable to install update components"
1. Close Pc companion
2. Install Java from: http://www.java.com
3. start Pc companion again and try to do the software unlock process once more.
If this fails let me know, you might need to send the phone in.
Best regards
Francis.

Similar Messages

  • No audio after ICS update.

    After ICS update, have lost audio playback. In settings, speaker has single line crossing thru it showing audio is muted. Can not unmute audio. Same for audio 'alerts'. Have rebooted and pulled battery to no avail. Ideas?

    I also have the same problem with the sound going in an out and lines through the speaker/notification etc. I called tech support and they actually told me to come on this forum and look for solutions, because the update has problems. I certainly didn't really understand that message...45 minutes waiting on hold to tell me to check the boards. Oh well. Any answers let us all know. :-)

  • Xperia arc S LT18i - contact issues after ICS update

    I've encountered an ICS problem regarding contacts. Contact search field is not functioning well when searching for a specific name..i found this problem while trying to text somebody. Contact search field wasn't accurate at all after ICS update...

    Can you please elaborate on this issue? What exactly do you get when you start typing out a contact name?
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • HT4623 How do I retore app icons to screen after IO6 update?  They now appear only in App store list

    How do I retore app icons to screen after IO6 update?  They now appear only in App store list

    Go to iTunes, click on Apps in the left window, to bring up your app library. Then click on "check for updates" in the right window, bottom corner. If there are any updates available, you'll be notified of the number and you'll have to choose the apps you want to update in the next screen shown, or update them all at once after filling in your password.
    You can also click on one app in the library and choose "get info" to see the actual version saved in your library.

  • Camera on ipad2 not working after ios7 update?

    Camera not working on ipad2 after ios7 update?

    AApple takes no responsibility for their updates causing harm to devices. See section 7.4 through 7.6
    i see a lot of denial on this site when it comes to viruses, the same applies to apple updates messing up folks devices. Take it back to an apple store and it is likely the best you can hope for is a discount on a new ipad.  Good luck.  Hopefully someone here can help you with a fix.
    http://images.apple.com/legal/sla/docs/iOS81.pdf

  • After ICS update, stock email not syncing for exchange 2010 activesync.

    After ICS update, stock email not syncing for exchange 2010 activesync.
    My corporate email which was flawlessly working before ICS update. Even though I tried re-creating a new account, it hangs "waiting for sync"
    Has any patch been released or explicit instructions have been provided ?
    First sync:
    5/3/2012 7:47 PM
    Last successful sync:
    Not Available
    Folders synced:
    0
    Device name:
    Not Available
    Device model:
    MT11i
    Phone number:
    Not Available
    Mobile network:
    Not Available
    Device type:
    Android
    Device ID:
    xxxxxxxxxxxxxxxxxxx
    Device IMEI:
    Not Available
    Device OS:
    Android 4.0.3
    Device language:
    Not Available
    User agent:
    Android/4.0.3-EAS-1.3
    Access state:
    Access Granted
    Access set by:
    Global Permissions
    Policy applied:
    Active Sync Policy - Partially applied
    Policy updated:
    5/5/2012 8:11 AM
    ActiveSync version:
    14.1
    Also at http://talk.sonymobile.com/message/184221
    Whyr is this defect "assumed answered" ? I went though all the posts and didnt find any solution?

    Hopefully my reply to this can help.
    http://talk.sonymobile.com/message/190149#190149
    And please try to keep same problem in same thread.
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • I can't get my gmail app to send alerts after doing update. I'm using iphone 5.  Any ideas?

    I can't get my gmail app to send alerts after doing update. I'm using iphone 5.  Any ideas?

    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
        1.    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
        2.    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
        3.    Restart the Apple TV (Settings > General > Restart).
        4.    Restart the Apple TV by removing ALL the cables for 30 seconds.
        5.    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
        6.    Restart your mobile device.

  • Why did I lose my apps on my iPhone after I update to IOS 6?

    Why did I lose my apps on my iPhone after I update to IOS 6?

    I would guess that it is because you failed to make sure that they were all on your computer before you updated.

  • After ICS update, camera forces close

    After the latest ICS update, (which I love the look of it) but I've been having a couple of frustrating issues. My camera on my Motorola Razr forces close. It says it had an unexpected error and needs to close. When you finally get it to work, when you take a picture, it freezes and the image will not open. Some of my pictures wont load now, even ones that I just downloaded.  Also some of my music wont play, the pictures are no longer accurate, and it sometimes forces close as well. Also the battery life sucks now. Before I just had to charge it in the afternoon before I leave the office and it would then last until early in the morning, but now I take it off the charger when I leave work and with very little use, a couple of hours later and its almost completely dead. I never had an issue with it just shutting off either and now it will just randomly freeze and shut off. I hope there is going to be another update to correct these issues!

        Sorockerchic, I’m glad to hear you are liking the look of the ICS update. Now let’s get this issue with the camera resolved so you can get back to taking your pictures.
    You mentioned that the issue with the camera, battery life, and freezing started after the ICS update. You may have some apps that are not compatible with the update and causing these issues. I recommend you perform a hard reset http://bit.ly/tQ0nkT to help resolve these issues. This is recommended especially after such a big software update.
    Please post back if you continue to experience any of these issues after performing the hard reset. I’ll be more than happy to further troubleshoot.
    John B
    Follow us on Twitter @VZWSupport

  • Issues after ICS Update to Neo V

    1. Performance lag is there although I have removed many apps and Internal memory as well as RAM available is more than what it was earlier. Any suggestions?
    2. Apps crash. The most worrysome is the scenario when you are not able to receive a call because concerned app is crashed. After that no trace of call so you can not even call back. This has happened couple of times after update on 25th April.
    3. Today morning I used camera with smile detection on. Camera kept clicking pictures after detecting the smiles. Auto click was off. Any one else faced this problem?
    4. In ICS, you can not do screen capture by pressing power button? I read some where to use Power button & volume down button simultaneously. However it some times works, most of the time does not. Any suggestion.
    Madan Mohan
    Solved!
    Go to Solution.

    1) it is suggested to format SD card and reinstall your phone's software again using PCC or SUS
    2) Same as above
    3) if you will set it to smile detection, obviously it will click pics when you will smile ( again and again)
    4) same as 1 and 2, just take care to press at the same time ( exact) and hold them there unitil you take a shot
    Conclusion :  Please format your sd card and reinstall your phone's software using pcc.
    Your experience may change
    Discussion guidelines.
    Message me or any other moderator to seek help regarding moderation.

  • Few apps don't work after Anna update

    I got a new N8 recently (my last one was stolen, insurance covered most of it though) but with the same product code and everything. Of corse, it didn't come with Anna pre-installed (it actually came with PR1.0 and I remembered how horrible the phone used to be). However, I updated to Anna with Ovi Suite without problems but I had a few weird experiences with the additional 1/2 and 2/2, for instance, when the phone found these updates it said that they were about 30-40 kB which obviously is wrong, and it took a while to install them. Then later I got them both again but this time they had the right size. 1/2 installed without problems but I had to try with 2/2 several times before it (")worked(").
    Anyways, some apps like fMobi (pay-version) and the swedish app for public transportation don't work anymore. Don't know if they did on my last N8 after update. The additional updates were supposed to fix some non-working apps but it certainly isn't that way with my N8...advice please?

    Just to point out that the fMobi stopped working in my N8 too after the update.
    Uninstalled and reinstalled no end.
    But I found that if you go to the fMobi facebook page, he say's that wiith the new controls put in by facebook, it has somehow messed up the App. Check his page out and see what he says.
    Jurassic Park, Sam Neill to Dickie Attenborough " Mr. Hammond, the phones are working !"
    N8-00 Tesco UK 059C951, Lumia 920

  • Droid RazrMaxx battery problems after ICS update

    I purchased a RazrMaxx in June and updated it to ICS on June 29. Since the ICS update the battery life on the phone went downhill. After a 100% charge and having the phone on standby for the last 14hrs 15min, I have only 30% battery life. I reset the phone twice to factory specs, it did not help. Screen brightness is set to about 30%,battery savings mode is on. Does anybody have any suggestions. Thanks

    Wipe Cache first, if that doesn't bring joy, FDR but do not let google restore apps/data - set them up manually(PITA, I know)
    For info on how to do either:https://community.verizonwireless.com/thread/777870

  • BMW pairs with RAZR, but no contacts after ICS update

    One of many problems since ICS update:
    BMW pairs with RAZR via bluetooth, but cannot access contact list on phone.  I can manually dial and connect phone calls through car.
    Dialog box on Phone asks to access BMW, I press OK, same dialog box appears...repeat ad infinitum.
    I have deleted phone pairing, re-paired, soft reboot, re-paired...still no contact list appears on car's communications screen.
    Had no problem with car/ phone pairing prior to ICS update.
    Any suggestions?

    Jim Have a Look at this Links and Maybe it can Help you get you Bluetooth Going: b33
    https://forums.motorola.com/posts/ed7efd7b48
    https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/72007/p/30,6720,8112
    How do I setup and use Bluetooth?
    Your phone can connect to other devices wirelessly, using Stereo Bluetooth® technology Class 2, v4.0 LE + EDR  technology with several Bluetooth® Profiles.
    Quick links
    Instructions for Android 4.X (Ice Cream Sandwich) users
    Turn on and connect to a Bluetooth device  
    Reconnect devices
    Disconnect devices  
    Changing the phone name  
    Supported Bluetooth Profiles
    MotoSpeak FAQs and information   
    Turn on and connect to a Bluetooth device
    To turn on and connect a Bluetooth hands-free headset(s), car kit(s), or other Bluetooth devices:
    On the Home screen, press the Menu key
    Tap Settings
    Tap Wireless & networks
    Touch Bluetooth to turn it On
    Touch Bluetooth settings
    Touch Scan for devices (make sure your device is in pairing mode)
    Your phone scans for available Bluetooth devices
    Touch the Bluetooth device to select it
    Type the PIN if needed (PIN is usually 0000 or 1234)
    Touch the device name again to connect to it. (If it doesn't automatically)
    Tip: If your device is not connecting to the Bluetooth accessory, it is recommended that you try to reset the Bluetooth device. Check your accessory user guide for reset details.
    Reconnect devices
    In order to automatically reconnect your phone with a paired device, simply turn on the device.To manually reconnect your phone with a paired device, touch the device name in the Bluetooth devices list.
    Disconnect devices
    In order to automatically disconnect your phone from a paired device, simply turn off the device.
    To manually disconnect your phone from a paired device, touch the device name in the devices list, then press Menu> Disconnect.
    Changing the phone nameThe phone name identifies your phone in a Bluetooth network. Default name is usually "Motorola Phone"
    Make sure that you have turned Bluetooth on (See steps above)
    On the Wireless & networks settings screen, touch Bluetooth settings > Device name
    Enter the name for your phone in the dialog box, then touch OK
    Supported Bluetooth ProfilesYour Motorola DROID RAZR uses Stereo Bluetooth® technology Class 2, v4.0 LE + EDR.The following Bluetooth profiles are supported:
    A2DP,
    AVRCP,
    BIP,
    BPP,
    DUN,
    FTP,
    GAP,
    GAVDP,
    GOEP,
    HFP,
    HID,
    HSP,
    OPP,
    PAN,
    PBAP,
    SPP
    For Android 4.X (Ice Cream Sandwich) users.TURN BLUETOOTH POWER ON OR OFF
    Touch Menu  > System settings, then touch the Bluetooth power switch to turn it  or .Note: To extend battery life, turn off Bluetooth power when not in use.CONNECT NEW BLUETOOTH DEVICES
    Note: This feature requires an optional accessory.To connect with a new Bluetooth headset or other device, you need to pair with it. You only need to do this once for each device-to connect again, just turn on the device.
    Make sure the Bluetooth device you are pairing with is in discoverable mode.Note: Refer to the guide that came with the Bluetooth device for details.
    Touch Menu  > System settings > Bluetooth.
    Touch the Bluetooth power switch to turn it  and scan. If Bluetooth power is already on, touchSEARCH FOR DEVICES.
    Touch a device to connect.
    If necessary, touch OK, or enter the device passkey (like 0000) to connect to the device. When the device is connected, the Bluetooth connected indicator  appears in the status bar.
    Note: Using a mobile device or accessory while driving may cause distraction and may be illegal. Always obey the laws and drive safely.
    RECONNECT DEVICES
    To automatically reconnect your smartphone with a paired device, simply turn on the device.
    To manually reconnect your smartphone with a paired device, touch the device name in the AVAILABLE DEVICES list.
    DISCONNECT DEVICES
    To automatically disconnect your smartphone from a paired device, simply turn off the device.
    To manually disconnect your smartphone from a paired device, touch the device name in the devices list, then touchOK.
    CHANGE DEVICE NAME
    Touch Menu  > System settings > Bluetooth, turn Bluetooth power on, then touch Menu  > Rename phone. Enter a name and touch OK.

  • Livedock problem after ICS Update

    Hi
    My Livedock stopped working after the ICS Update (via PC Companion).
    I tried uninstalling the app update so I could reinstall it again and see if this fixed the problem however I now get the following error when trying to update livedock to the latest version:
    "Package file was not signed correctly. Uninstall the previous version of the app and try again."
    Any ideas?

    Try to reinstall the phone software via PC Companion.
    http://www.sonymobile.com/gb/tools/pc-companion/
    Let me know if problem still remains after software repair.
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Has anyone else had email notification issues after ICS update?

    After the ICS update, I am not longer getting any email notifications.  I only get notifications after I open the stock mail app and it loads the emails.  I have unistalled/reinstalled numerous times without any change.  I have looked through the new ICS settings to see if switch got changed, without any luck.  Has anyone else run into this issue?  Thank you in advance

    I think if you delete data and cache from the email app, then re-add your email address, it should help.

Maybe you are looking for

  • Cutover strategy for Cash Management

    Hi Gurus, Please tell me about the cutover strategy for Cash Management?? We are implementing Cash Management in mid year, so how can we take the data in effect which is already posted in the system?? Please revert asap. Thank You

  • Nested tables as separate lines in output

    I'm working with Adobe forms using transaction SFP from the ABAP Workbench. I'm trying to construct a prototype of an SD invoice, with one internal table having the basic item data, and then a secondary table with further information, such as discoun

  • Spry UI (Spry 2.0) Not Visible in IE

    I'm still searching and trying to figure out why the new spry menu bar is not visible in IE, but if you anyone can see or knows something that i may have overlooked please let me know. Other than that the menu bar works great in all other browsers in

  • Automatic Approval in the next steps

    Dear, We have our own workflow to purchase requisition approval and we need to improve it. The wf gets in HR struture the person who needs to approval the document based on the initiator. Considering that the strategy needs an approval of controller

  • Can't extend windows 7 partition, even though I have 40gb of unallocated space?

    Can someone help? I am in computer management in Windows 7 and would like to somehow use "unallocated space" of 40gb to further expand and extend my Windows 7 partition of 325gb, but the option is grayed out.   I can shrink the Windows 7 Partition, b