Camera archive not accessible

I created a camera archive from a DV tape. Everything appeared to import correctly and I now have a 13GB .fcarch file. The problem is the FCPX does not see this file. When I try to open it in the camera import box, the file is greyed out. I confirmed that the archive package contains the clips.
Any ideas?

I had the same problem. The way I solved it was to select Import Camera (as if I was importing from a new tape), and when I got the import window I selected the .fcarch file (that was already there), and selected import all.
A sweep then appeared next to the file name, indicating the fraction imported. It took only a few minutes.
A bizarre way to do things.

Similar Messages

Import camera archive not working in iMovie '11 on 1.8.2?

I typically copy the contents of my camcorder to a folder on disk and then would select "import camera archive". However, now with Moutain Lion it is not recognizing any of my folders as a AVCHD folder?
As a test, I took a DMG file (which is how I used to do it, because prior versions of iMovie didn't support anything other then this) and performed a "archive all" on that DMG.. This should be no different then copying the files and tried on this newly created Camera Archive and I get the same results?
It seems that with moutain lion, tha AVCHD contents of are now recognized by Finder and show up as a type "AVCHD Content"..
Help!?
thanks,
-jr

Hi,
My problem is very similar. I am able to choose the Archive folder and import the footage that way. However, I am only able to do that once. If I try again, it states the file is not a camera archive format file.
The only way I can get it to work again is to completely close out iMovie and restart. Then I can import an archived file. But then again, only once before I have to restart iMovie to get it to work again.
Anyone have any workarounds?
Thanks

IMovie 11 import camera/archive not displaying movies, import not possible

Guys,
hope anyone can help me with this one:
I had some issues with my iMac lately crashing with kernel panics. It crashed (kernel panic) while i was importing some HD material into iMovie 11. ever since, I cannot see any movie thumbnails in the import view (the actual movies are still on the camera/SD card. Also importing from iSight is not possible. The green light next or the camera is on, while no window or an empty import window is visible.
I did delete the whole iLife 11 suit, incl. all references to iMovies (preferences,...) and then a complete reinstall and updated all again.
Unfortunately no luck so far.
Any tips or thoughts what I could do next as I really don't want wipe and reinstall all on my mac again?
Cheers from DownUnder
Le Jones

Hi,
My problem is very similar. I am able to choose the Archive folder and import the footage that way. However, I am only able to do that once. If I try again, it states the file is not a camera archive format file.
The only way I can get it to work again is to completely close out iMovie and restart. Then I can import an archived file. But then again, only once before I have to restart iMovie to get it to work again.
Anyone have any workarounds?
Thanks

Camera Raw not accessible in Ps -Br Trial

When I click the iris button to start camera raw from Br, I get the following message- "Bridges parent application is not active_ Bridge requires that a qualifying product has been launched at leat once to enable this feature" I have launcched bridge from Photoshop. I am trying to oopen it for a Jpeg, which I understood work with Camera Raw.

OS Windows XP Professional 2002 SP3.
OK, now I have to leave you to the Window wizz kids, I'm only familiar with Mac.
However, the give versions seem correct but you seem to have installed PS as 32 bit instead of the 64 bit. Is that due to your XP 2002 system?? I have seen some discussions mentioning XP would not work correctly anymore with latest Adobe and other where stating that combined with service pack 3 it should do.
Adobe Camera raw is provided as a plug in and is able to work both through PS and Bridge, even simultaneously if your PC has enough power for it
But the ability or inability for 64 bit in XP could have caused your problem earlier on.
Don't know if you have to deactivate a trial version before uninstalling (don't suppose so) but deactivating using the help menu and clear preferences should be first, then the official uninstall procedure with the Adobe uninstaller with clear preferences and at last the Adobe Clean Tool.
Mixing up suites and single versions is also not sounding good, to be honest.
Curt and Yammer will know about the 64 bit issue.
And I don't want to start a different discussion but you are trying software based from 2011 on a system based from about 9 years earlier...

FCP X not reading camera archives (Unsupported Media, Invalid Directory)

I shot a documentary in May of 2012 and imported the media everytime a card would fill up or at the end of the shoot day. I also created a Camera Archive for each card (we shot Sony PMW-F3 and PMW-EX1). A few clips have gone missing and when I plug in my back-up drive to reconnect the media, FCP X gives me a warning reading "unsupported media or has invalid media directory." I've moved the archives onto my editing RAID and got the same error message. I've trashed all my preferences and tried again - same error message. I then trashed my preferences, deleted the program entirely and redownloaded from the Mac App Store and tried again - same error message.
Has anyone seen this error message before? Any resolution?

Very strange: I plugged the drive into my laptop (MacBook Air, 2011) and the same version on FCP X (10.0.5) was able to read the archives. Not sure what the difference is between my two setups, thankful it worked, now want to know why my MacPro won't read it.
Tim

How do I import a camera video from iphoto to imovie? I went to file, import, camera archives and the video I want I am not able to select. I even tried dragging it from my desktop, but it will not allow me to do so. Please help?

How do I import a camera video from iphoto to imovie? I went to file, import, camera archives and the video I want I am not able to select. I even tried dragging it from my desktop, but it will not allow me to do so. Please help?

Use File/Import/Movie and navigate to the file.

The 'Reimport from Camera / Archive' button does not appear in my file menu.

My last attempt to import material from my camera was interupted so not all the footage was imported to iMovie. I have re-attached the camera to try and reimport and the message on iMovie says that I should select the 'Reimport from Camera / Archie' option from the File Menu. Unfortunately, there is no such option in my file menu. I am using the latest version of iMovie 10.0 and my camera is a Panasonic HX-DC3. Help?

i wasn't even interupted, it told me it had imported everything from my gopro then i aimlessly went onto edit. ejected the gopro, went down stairs. came up to continue only to find half of the vids missing from the project screen. telling me the file was missing as it was still on the camera. so i went to import again. it told me done. no not done still on camera only. then when i go to consolidate event files it tells me they are already there. no not there. i went to share finish project (after pluging gopro back in and finishing project with half the vids in the libary and the other half stillon the camera) it lets me share to the new iMovie theater but when i go to youTube it it tells me it cant as half of the files are still on the camera.
i hover over the camera icon on the video file in the project screen where it pops up a info window telling to reimport from camera/archive......... from the file/menu...
hm hmmmm
nowhere to be found.
think you forgot a few things apple.........
fix it up

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Site not accessible from the Load balanced web front end server - sharepoint 2010

I have a production environment with 2 WFE's(sp-wfe1 & sp-wfe2), 2 APP's and 2 SQL clustered VM's.
2 WFE's are load balanced using hardware load balancer.
An A-Record(PORTAL) is created in DNS for the virtual IP of the load balancer which points to the 2 WFE's.
A web application is created on the WFE's on port 80.
alternative access mapping is configured and the load balanced record "http://PORTAL" is used under the default zone.
Under IIS I have edited the bindings for the sharepoint site at port 80 and added the HOSTNAME as PORTAL.
Result: The site is accessible from outside the server and works fine.
ISSUE: The site is not accessible within the WFE's(sp-wfe1 & sp-wfe2).
When I browse the site from the WFE's server it ask for the credentials and when I enter the credentials and click OK it ask the credentials again and again and in the end displays a blank page.
Kindly help me in this issue because I am clueless and couldn't find anything helpful on the internet.
Regards,
Mudassar
MADDY-DEV Forum answers from Microsoft Forum

Loop back check.
http://www.harbar.net/archive/2009/07/02/disableloopbackcheck-amp-sharepoint-what-every-admin-and-developer-should-know.aspx

HD Not Accessible to Repair Permissions

Hello. I hope you can help me isolate the error that is keeping my Intel iMac G5 from booting properly. I’m running 10.4.
It froze after I’d been backing up onto DVD/dumping old data (about 20GB worth). Whenever I tried restarting the screen would freeze on the grey apple logo, sometimes with the swirly icon.
When I ran Disk Utility off the install disk at first it indicated “error detected” on mass storage, but later said it was fine. But I could not run Repair successfully (I kept getting "repair failed" messages), and the Repair Disk Permissions button was not accessible (greyed out).
I could not startup in safe mode. And if I tried to restart in DU the only option was a Network (which I'm not hooked up to).
Once I got a Kernal panic screen but most of the time it was just a grey apple with the fan hitting 900 rpm.
Finally I ran DiskWarrior and in 15 minutes it had cleaned out and rebuilt my HD. I thought I was home clear.
However, even though Disk Utility now says my HD is fine, it still does not allow me to Repair Disk Permissions - the option is greyed out. And if I boot up pressing Option to select a Startup Disk, the rebuilt drive is not one of them.
It appears my /Library/Receipts folder is empty.
What’s more, if I try to run an admin command in Terminal, like
sudo diskutil repairPermissions /
I get the message:
-bash: sudo: command not found
In fact, any way I try typing sudo I get a “command not found” message, even if I try to run other command like chmod.
When I type:
Users
I get
Users: command not found.
So I typed:
Echo $PATH
And get
/bin:/sbin:/usr/bn:/usr/sbin:/usr/libexec:/System/Library/CoreServices
I’m not sure at this point whether the fact that the DiskWarrior-rebuilt drive doesn’t show up among Startup options (when I boot with option key) is because of missing/broken permissions; an empty /Library/Receipts folder; missing users; or a missing path.
Any and all help is appreciated. Thank you.

Oy. I purchased an external drive and began installing Mac OSX onto it, so that I could then migrate all files from the unbootable hard drive before running an Archive & Install. That part seemed to go smoothly. But a few problems have emerged:
1. Though I was prompted to keep Disk 2 of the install ready, it never asked me for it, even though I ran the installation 2 or 3 times. Consequently while I can select the external drive when booting up command-S, I can only see Install window, Disk Utility or Terminal windows - never a desktop, preferences drop down, help menu, finder, all the things I'd typically see when launching my machine. Is this normal? Is there a way to force it to install only disk 2 if it has things it needs for full bootable GUI / access?
2. Booting up with the install disk, in disk utility I can see both drives but still cannot repair permissions on my affected HD. I tried via Terminal (repairPermissions, chmod or chown) commands; I keep getting error messages (command not found).
3. Switching cd / to my new drive in Terminal, I was able, I think, to change permissions (755) but when I open Disk Utility the drive is still not writable and "Repair Disk Permissions" is still grayed out.
4. I could not open Migration Assistant on the new drive via Disk Utility, so I copied it from the HD into its own folder on the new one, but am really confused about the whole Disk Image thing. If I create a new disk image and try to open it, convert or checksum it, it still is grayed out, I can never just open it. I tried running commands in Terminal to run that application on the external drive, pointing to the new folder, to the .app, to the contents, .dmg, and no commands seem to work, I keep getting the command not found message.
If I just run the A&I, I fear I'll lose my data which is why I wanted to migrate everything over before I did so. But if the user / owner permissions are screwed up and the only way to fix them is A&I, I don't know what else to do.
Is there ANY way to boot from the install, run Migration Assistant from the external drive (either through Disk Utility or Terminal) and copy all files from HD? If not, I guess I'll have to cross fingers and A&I.
Gee, I used to love my Mac ...

Unable to place disk image in Camera Archives

The Final Cut Pro X manuals show that one can import a disk image of a movie into Final Cut Pro X by opening the camera archives. I have made a disk image file (.img) from an iMovie 6 project file. (The video appears as a VTS file in the Video TS folder.) How do I get it to appear in my camera archives file so that I can import it into Final Cut Pro X?

That's a disk image for an authored DVD. You can't. It's in an MPEG-2 that's not supported for production only for delivery. You would need to use something like MPEG Streamclip to rip it.

Final Cut Pro X - Create Archive not working with Yosemite!

Just upgraded my laptop to Yosemite and now I can't create any camera archives. I am not sure if it is my laptop or Yosemite that is causing the issue. I tried creating a camera archive with the same SD card on another machine (running Mavericks) and it worked fine. Anyone else having similar issues?

Oddly, still no luck. i was hoping to find something in the logs but FCPX keeps pretty quiet. My goal was to see if this feature was broken but since it is working for others, I will close this question.
Thanks

I can't import my Camera Archive to final cut pro x

In Final Cut Pro X, when I select Import Media I can navigate to a folder where I have my camera archives on an external drive. But all archives are greyed out and when I try to double click them from the finder, Final Cut Pro X opens but it says it can't read the Final Cut Pro Camera Archive Format.
Exact error:
The document “camera-archive” [actual file name is different] could not be opened. Final Cut Pro cannot open files in the “Final Cut Camera Archive” format.
Any suggestions greatly appreciated.
rMBP 15"
Mountain Lion 10.8
FCPX 10.06

Do you have Final Cut Events, Projects AND the archive at root level? If so, try hiding the Project and Event folders inside some other folder. Then quit FCPX and restart, or start it up. I know that if you have project and event folders at root level and add a Private folder at root level all **** breaks loose (at least in my experience). I'm not sure that's the case with camera archives so if it's applicable, try the hiding and restart or startup.

Arabic and Hebrew features InDesign CC (2014 release) not accessible

Hello,
I need to create a lay-out with Arabic content in Indesign CC (2014 release). After checking how to go about that via the help-section (online and PDF) I have to conlude that the help does not help me any further.
It says I need to, from the paragraph panel options, set InDesign to the world-ready paragraph composer in order to have the text direction etc. features enabled. This, however, is not the case. The panel still looks like before and I get no Arabic / hebrew features.
This is the same for the character panel, wich also does not give the shown options for Character direction as shown in the Help screenshots.
I have followed all the suggestions in the help section.
I have also tried setting the default paragraph editor to World-Ready via the preferences, and then restart the program, but still no success.
Please advise, it's urgent.

Hi,
Every change of plugins is resetting preferences.
Each language has its own preferences. But you move or copy them manually but you might adjust them afterward, because everylanguage has not the same functionality. At least not on the same place.
Viele Grüße
Wilhelm Georg Adelberger
Von meinem iPhone gesendet
Am 12.12.2014 um 15:18 schrieb jonasdr <[email protected]>:
Arabic and Hebrew features InDesign CC (2014 release) not accessible
created by jonasdr in InDesign - View the full discussion
Hi William,
It worked!
Allthough I did not understand that, from the CC panel, I should install the entire app again. Thought this would go through the preferences window, but I noticed that, when changing the App language in the preferences, the app-list in in the panel changes.
Only thing is now: all the preferences and personal workspaces are gone:-(
Adobe realy doesn't make it easy, unless you're into IT, wich i am totally and absolutely not;-)
Antways,
thanks for the usefull info;
Have a great weekend
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7008710#7008710 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7008710#7008710
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in InDesign by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How can I prevent my Camera Archive import from being interrupted by timecode breaks?

I'm trying to create Camera Archives from my old mini-dv tapes. I have a Sony Handycam DCR-TRV22 connected via FireWire. When I start the Camera Archive import process, everything is fine for a while but then the process stops with a message about a break in the timecode preventing the archiving from completing.
Solutions to this problem I've seen online relied on changing import preferences in Final Cut 7. Unfortunately, I only have Final Cut Pro X and I'm not sure how to control this setting.
I don't really care about timecodes, I just want to dump the entire tape to disk so I have a backup of the tape but the timecode break is interrupting the process and making me get involved a lot more often during the import process.
Does anyone know how to force Final Cut Pro X to push through timecode breaks in a Camera Archive import?

To clarify, this problem is not simply making me get involved more, but is preventing the Camera Archive operation from completing.

Camera archive not accessible

Similar Messages

Maybe you are looking for