Camera automatically turning on

3 days ago, I've use my phone on a pool party I had with friends. After using it, I dried it off and it seems to he working perfectly fine afterwards. Then a few hours later, the phone camera automatically turns on even with the screen locked. I read one thread that he just left it to itself and air it out, I did too overnight. The next day it went back to normal but now it's doing it again. I tried the reboot with the red button, it's still the same. Any advice before I turn this in to the service center?

   Yesterday,exactly 29 hours ago,I've watered my Xperia Z1 in the sink for clean up my phone.After cleaning it,I dried my phone as @rossettesp do it.Before I clean up my Z1,I've already check the USB port,etc to make sure It's been closed well or not as the usual.    After 3 hours later,when I use my phone to checked the notification.After 1-2 minutes,Suddenly my camera was automaticly launched.First time,I think my hand has pushed the camera shutter inadvertenly.But,It was launching automaticly continuously.I got into save mode,But still happenned.Then,I think maybe my camera has crashed or something.     This morning,I've factory reset after The camera Automaticly launch when I was used it for gaming.After I've done my Factory Reset,but,sometimes It still happened when I downloading apps from playstore.Because not too often,I ignored that and charged my Z1.After fully charged,I used it and after the first 15 minutes,The camera was automaticly launch more often than this morning and took some photo until That's disturbed my dinner,etc.Then,exactly 1 hours ago,I've totally factory reset.After I've finished it,It's been still automaticly launching until this time   Anyone Please advice,If U had the answer of this problem.Thx U

Similar Messages

  • Ideapad G480 (20156) Integrated Camera automatically turns off?

    Hello, My Lenovo G480 (20156) laptop automatically turns off the camera even when I'm broadcasting. Fn+Esc works but shortly after pressing the keys the light beside the camera turns off. How do I keep the camera turned on? Also, turned off. I can't seem to find any topics about this. Please help. Thanks.

    Hi
    Welcome to the community.
    As per your concern I would suggest you to please perform the following steps. 
    1. Press the Fn+Esc key to enable the camera.
    After that visit the mentioned below web link and install the camera software.
    http://download.lenovo.com/UserFiles/Driver/en/Downloads%20and%20Drivers/G550/Windows%207/IN2STW01WW...
    Afterwards, please restart the system and check if the issue resolved.
    Regards,
    Sameer
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Camera Automatically Turns off (c6-01)

    I have c6-01, the problem that i face in my mobile is that some time when i want to take a picture or want to make a video , before the capture a picture and stop the video and save it, the camera suddenly turns off without saving and menu is displayed. After that when i see video folder to see save video, there is no video that i have made before.

    your problem could be because of low RAM so while capturing videos make sure that none of apps are running in background

  • I have got in a wrong website and it is a chatroom like Skype,I don't know that  whether the iPad will turn on the camera automatically or not?I use the puffin web browser.thank you.

    Will the iPad turn on the camera automatically  when I get in a chatroom in Internet ?i am using puffin web browser.thank you.

    sailsalot wrote:
    I have a new ipad and have used the community to answer questions for myself.  Your help has been great!  I don't know how you got my sailsalot name from my Skype account but I signed in with you as "gags76" and got help with my new ipad.  I discovered I used a different Apple id and password on my ipad from my computer (imac) and changed that.  My e-mail is   Could you email me if there is something I should do at my end.  I have to use itunes to sync with my ipad so I have been going back and forth between the two.  Should I sign in with my proper Apple id on my ipad?
    Yes

  • Can anybody say why In the layer menu the background color is white when opening a layer mask, and why does it automatically turns black by simply opening the layer mask properties menu? The vector mask is white anyway.

    Can anybody say why In the layer menu, the background color is white when opening a layer mask, and why does it automatically turns black by simply opening the layer mask properties menu? The vector mask is white anyway.

    Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
    That field is not for attempting to fit your entire question in there.
    Please keep this in mind next time you post.  Thank you.
    A lot more information about your hardware and software is needed.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    a screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • My iphone 5s 16 gb has an camera problem, turn the camera on tap all green, please help me

    My iphone 5s 16 gb has an camera problem, turn the camera on tap all green, please help me

    Hi teejayfs,
    Thanks for visiting Apple Support Communities.
    If you've noticed unexpected behavior with your iPhone camera, start with these steps to isolate or resolve the issue:
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    You can find these steps here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Regards,
    Jeremy

  • Text in dropdown automatically turns bold

    The text that I include in dropdowns seems to automatically turn to bold - even thought BOLD is not set in the font formatting.  Is there a place in the code where I can fix this?
    Thanks...
    kb
    Using RH10.

    About the "see attachments". Note that although you are able to respond via email, this conversation is really going on via forums software. As such, attachments aren't allowed. You may attach all you want but the attachments are just dumped.
    If you honestly have attachments you need us to see, you are able to upload images when you reply via the forum interface in the browser.
    Just click the little camera icon to add them.
    Cheers... Rick

  • I phone 4s camera function turns itself off

    Often I can't turn on the camera function and when I can, as soon as I take a picture the camera app is automatically turned off and the photo is not saved. Help!

    Thank you very much for taking the time to reply. I tried everything you suggested but the issue remains. I suppose the next step is to bring the phone into the Apple store for them to evaluate.
    Thank you
    Blue

  • When unlocked, pc automatically turns audio to mute.

    Hello, I have an hp Envy 15 j037el and after the windows 8.1 update happens that when the screen is locked and I unlock it with fingerprint or password, the pc automatically turns the audio to mute.
    Thanks in advance
    FV

    Hello @Archangel52210,
    I understand that you are having issues with your new computer running Windows 8.1 where the audio is muting automatically. I am providing you with an HP Support document: Using Recovery Manager to Restore Software and Drivers (Windows 8), which you can use to restore the original drivers that came with your computer. As these drivers and their settings worked I believe they will again and hopefully when they are updated next time hey take better.
    Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • My X61 Automatically turn to Sleep

    Hi,
    I am having X61 Thinkpad with following specification:
    OS Name Microsoft® Windows Vista™ Home Basic
    Version 6.0.6001 Service Pack 1 Build 6001
    System Model 7675CTO
    Processor Intel(R) Core(TM)2 Duo CPU     T8100  @ 2.10GHz, 2101 Mhz, 2 Core(s), 2 Logical Processor(s)
    BIOS Version/Date LENOVO 7NETB9WW (2.19 ), 27/11/2008
    SMBIOS Version 2.4
    Installed Physical Memory (RAM) 3.00 GB
    I bought it in May 2008, first it was fine but now it automatically turn to sleeping mode while i am working on it. Is there any one fimiliar with my problem and can help me please do reply.
    Regards.

    another problem that comes to my mind is that you might have updated your BIOS and that has caused your fan to stop working on time and therefore your system is heating... and when it reaches a certain threshold it goes to sleep... hope this solves your problem...
    mFn

  • How do i fix my nano (6th gen) from automatical turning the volume down by itself

    how do i fix my nano (6th gen) from automatical turning the volume down by itself? I bought my first nano (6th gen) and it started to happen. so, i just bought a new one because i'm unavailable to take it to an apple store. now, the second one is doing the same thing.  i've reset them through itunes, and it continues to happen. any suggestions?

    Did you check your volume limit settings?
    copied from page 24 of the iPod_nano_6thgen_User_Guide

  • When I define a variable in BO it automatically turns it into a detail

    i have made a user prompt in my report
    so the user can input a value that does not exist in universe so i can use it as condition or a filter,
    i have done this by using the followiing condition in the query
       object = object
    or
       object = ToPrompt("Give number")
    As you can see by the logic this condition will ALWAYS be true because object  = object  is always true. So this logic will not impact the rest of the query it will just allow to enter any value in the user prompt
    in the report when i try to create a new variable
    =ToNumber(UserResponse ("Query 1 with NEW_UNIV" , "Give number"))
    it automatically turns it into a detail and i cant change it to measure or dimension.
    is there a way to fix this
    thanks in advance

    some one answered in the following link
    [When I define a variable in BO it automatically turns it into a detail;

  • Reading PDF in large screen mobile phone is often the horizontal screen reading,but the new adobe reader for Android mobile phone needs to be set to automatically turn screen, this is very inconvenient.

    Reading PDF in large screen mobile phone is often the horizontal screen reading,but the new adobe reader for Android mobile phone needs to be set to automatically turn screen, this is very inconvenient.I strongly suggest that the adobe reader Android version add manually rotating screen function, the best is the default horizontal screen reading.

    Reading PDF in large screen mobile phone is often the horizontal screen reading,but the new adobe reader for Android mobile phone needs to be set to automatically turn screen, this is very inconvenient.I strongly suggest that the adobe reader Android version add manually rotating screen function, the best is the default horizontal screen reading.

  • How to get iBook to Automatically turning the page

    It used to do this on The software before but now I just can't get it to do it on iOS 7  please can anybody help thanks in advance

    That depends on what you mean by "automatically turning the page". The only available settings for page turning behavior is in Settings > iBook > Both Margins Advance.

  • Will an iPhone automatically turn off location services.  If it goes below a certain battery power level, and so how you disable this in settings.

    I am working with Georgia DOT and we have created an app to track our state vehicles using IPhone 5. My question is: will an iPhone automatically turn off location services?  If it goes below a certain battery power level, and if so how do you disable this in settings.
    Message was edited by: mickyel

    I don't believe that this will happen, however, the entire iPhone will shut down when the iPhone reaches the auto-shutdown power level. There is no way to turn that Off other that connecting the iPhone to power.

Maybe you are looking for

  • Which monitor out of 3?

    hi i've narrowed down my choice to just three but need advice as to which one to choose: 1) ctx 19 s966g 2)samsung syncmaster 730b 3) dell 1704 fpt any thoughts ? thanks charlie

  • How to make a CSS transition?

    I have text beneath a picture, but I'd like to hide the text behind the picture and have it drop down when a mouse hovers over it. I can't get it to work.

  • Acrobat Reader 3.02 vs. Win7 x64

    Hi all, I'd like to ask for help. We have generated a lot of PDF files with automatic script. Problem is, that PDF files are openned correct only in Acrobat Reader 3.02, in newer version are not correct diplayed some slovak characters (I hope example

  • SAP Training in UK

    Hi, can anyone guide me to SAP training centres in UK, (not SAP UK) thks

  • Logo has jagged edges

    I am trying to put a logo on the menu and it looks awful. the edges are completely jagged and the logo is pixelated. Bringing it in as the original photoshop file. any suggestions.?