Camera Calibration in RAW converter CS5

Hello,
In Camera RAW my defaults for the tab: CAMERA CALIBRATIONS are:
Process 2010 (current)
Name Adobe standard
How can I change these default settings in:
Process 2012
Name: camera standard
I'm using a CANON EOS 400D
Jan

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
To help others help you, please read through this article and provide any additional relevant details.

Similar Messages

Raw converter CS5

Is there a converter for raw images from Olympus OMD EM-10? I have CS5 and I can't open them on my mac.

The OM-D E-M10 needs Camera Raw 8.5 or later, and CS5 only supports versions up to 6.7.1, so you would need to upgrade Photoshop to at least CS6 to use the latest versions.
Alternatively, you can download DNG Converter 9.0 free, and convert your camera's ORF files to DNG, which can be opened in Camera Raw 6.X for CS5.
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 9.0

How do I upgrade PS camera raw converter from 6.6 to 6.7 I currently have CS5

I am trying to update the firmware on PS CS5 in the Camera Raw converter. I have 6.6 and need 6.7 to read my canon 5d mk III raw files. when I attempt to upgrade from inside PS help everything downloads fine into a box and at the end of the download I keep getting the following:
Photoshop Camera Raw 6.7 Update
There was an error downloading this update. Please quit and try again later.
there is a link for customer support which suggest that the serial number to my product is not for a qualifying product or that I need to have my serial number unlocked
I contacted customer service chat and talked with a tech. we went through it twice with him unlocking a full version CS5 serial number on my PS page and it still comes up with the same message - HELP

The last iPhoto for your Mac is iPhoto 9, not 9.5 or higher.
You may be able to call Apple a purchase a disk.
You can also purchse it over the internet:
https://www.google.com/shopping/product/1493369428672210473?rlz=1C1CHFX_enUS427U S428&es_sm=122&biw=1920&bih=1075&q=purchase+ilife+09&revid=548119861&bav=on.2,or .r_qf.&tch=1&ech=1&psi=xnZnVLOPOtSsyAS954GYCw.1416067237692.3&sa=X&ei=o3hnVKfHI9 KAygSj3oDYAg&ved=0CI0BELkk

Cs5 bridge has option..open in raw converter...greyed out

i just purchased and installed cs5, love the updates i have seen yet.....but cs5 bridge has stopped opening raw files, it actually never did open the first one..the option to open in camera raw is greyed out...i can use photoshop to open raws, one at a time...tried updating to raw converter 5.7,. cs5 still works, bridge does not...any thoughts?
Malcolm

ACR 5.7 is for CS4.
For CS5 you need Camera Raw 6.1.
You have to have the ACR in the correct folder and only one file there.

No update Camera Raw for CS5

The only update of Camera Raw for CS5 was ver 6.7.1 in Mid 2013 but the Nikon Df wasn launch in Dec last year. Adobe did not update the file therefore my Creative Suite 5 could not see the new NEF file unless I use DNG Converter to change to DNG file.

Adobe does not update obsolete versions on ACR.
So if you expect ACR to support RAW files from cameras that were not available when support for that version of ACR stopped with the release of the next version you will be probably dissappointed.
Please try the free DNG Converter to get the files into a format your obsolete version of ACR can process.

Canon 70D et Camera Raw (Photoshop CS5)

J'ai acheté un canon EOS 70D. Je n'arrive pas à utiliser Camera Raw (Photoshop CS5) avec cet appareil. Can you help me ?

Photoshop CS5 is not going to be able to directly open your raw files.
Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS5 is no longer receiving Camera Raw updates.
To double check this yourself:
First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Since your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
Photoshop Help | Digital Negative (DNG)
The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
-Noel

I am trying to convert raw files from a Nikon D7100 on CS5 extended. Will the RAW converter 7.4 work on CS5 extended?

Will Raw converter 7.4 work with CS5 extended? I am trying to open a raw file from a Nikon D7100.

You can get the free Dng Converter here:
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7.1
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7.1
This video explains how to use it.
Camera Raw: How to use Adobe DNG Converter - YouTube

Update raw converter photoshop CS5.5

i can't use update 7.1 raw converter dng, for CS5.5. no other update seems available anymore since CS6 came out, please advise.

Nothing to fix because nothing is wrong. ACR 7.0 and above requires CS6 or LR4.
Mylenium

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt available anymore in the plugin list. Tried to reinstall everything for a few times, but nothing helps.

When I search for updates the raw converter doesnt get update automaticly. Frustrating, is costing me the whole morning.

Camera Calibration Profile in Adobe Camera Raw 5.3

I'm trying to figure out the Camera Calibration tab in Adobe Camera Raw 5.3. It seems that every picture I open selects a different Camera Profile in the drop down menu. How do I know which one is appropriate for my camera (Nikon D40X)? Or, do you just select whichever one looks the best to you on the drop down menu for that picture? Or, does it matter that much at all since they never had this tab in there before?

I'm not sure I understand...when I open an image in Adobe Camera Raw 5.3, does it open with a different "default" for each picture? Or should I be using a specific profile from the pulldown menu, e.g., ACR. 4.4 or "Standard Adobe" or should I try them all and see which one I like?
Thanks.

How to Save Camera Calibration and Lens Correction in Camera raw 6.1

I downloaded and installed the Camera Raw 6.1 release candidate. I open an image and set the camera calibration and the lens correction to auto for Nikon. I save these settings as new Camera raw defaults, but when I open other images, the changes were not made. How can I save these items as defaults?
Swila

Swila, were your "other images" previously edited in Camera Raw? I.e., do they already have saved image settings? The defaults that you save via the flyout menu will only apply to new images, or if you reset an existing image to the defaults. (e.g., choose "Camera Raw Defaults" from the flyout menu).
Eric

Camera Raw Camera Calibration Tab and 5D Mark III

I don't think that many people do this in camera raw, but it was kind of an important step in my workflow with the Canon 7D before and is just not working the same way with the 5D Mark III now.
In the Camera Calibration Tab (Third from the right side) I always changed Camera Profile from Adobe Standard to Camera Standard or Camera Portrait. This step made the image automatically look better, contrast was better and the highlights look a lot better that way. Of course the "Camera Portrait" option makes the image a lil bit red, like the Picture Style in the camera does. But it was an easy adjustment with the Hue Slider of the Red Channel. Like I already said - really great improvement of the image on the 7D raw files, beautiful highlights, shiny, contrasty and so on... Same stuff worked with 5D Mark II perfectly, too.
Now with the 5D Mark III the "Camera Portrait" option, my favourite one, gets me pretty bad results. The Image is too strong oversaturated, too much red in the skintones and in the shadows, too! Shadow contrast gets worse and I can't control this settings the way I did before with the hue/saturation sliders of the channels. It's too extreme red or it's too yellow, but not something right between this extremes. And the highlights get some green tint, so it's no real optimization of the image overall quality at all, like with the other cameras. I don't know if the support of the 5DMIII is still not up to date... It is not only my camera, I also have asked other photographers with a 5D Mark III and they have the same issues changing the camera profile. Lightroom has exactly the same effect... It would be great, if an Adobe Employee can forward this issues, so that it gets tweaked with the further updates and 5dm3 will work the same way in camera raw like mark 2 or 7D.
Sorry for my bad english

Yes, white balance is another possible reason for mismatch
These rules apply:
- if you use white balance "as shot", then white balance in ACR will be the same as from camera or DPP (in a sense - what is white color in ACR will be white in DPP also). However, color temperature/tint shown in ACR will be probably slightly different than value recorded in exif of jpeg or raw file. It's because in that case, whitebalancing is performed using some metadata in raw file by both ACR or DPP, while temperature displayed in ACR is calculated from that metadat using color matrices in selected profile, according to a formula from one book (as documented in dng sdk), while DPP is probably using some other formula or slightly different color matrices
- the same will happen if you use WB dropper on exactly the same position in the photo by both ACR and DPP
- but, if you use the same temperature preset in ACR and DPP (for instance 5200 K), then white in ACR and DPP will probably be a bit different, because whitebalancing is performed in oposite direction now (ACR calculates RGB multipliers from that temperature and using color matrices in the profile)
I hope this was understandable, although it's a bit complicated

How to get Camera RAW / Photoshop CS5 to work with Canon 100D?

How to get Camera RAW / Photoshop CS5 to work with Canon 100D? I don't want to by this product again and again...

In what way is ACR not working in Bridge? Is there no right-click Open in Camera Raw available from Bridge, or there is, but the ACR version is less than ACR 6.7.1 or what exactly is the issue?
Also, if you open Photoshop and do Help / About Plug-ins / Camera Raw, is ACR missing from the list, or if not, what version does it say is installed?
You might also want to describe what methods you have tried to correct the issue, since saying you've tried what you've seen posted and they didn't work, isn't really much to go on.

Camera calibration in Camera Raw 6.7 VS 7.0*

Hi again!
I noticed that in cameraw raw 7.0, under camera calibration, my only choice is Adobe standard. I get the same for me Fuji X100.
In the 6.7 version witn CS6, for my Canon 5d Mark III (same with the Mark II), I had the full array: Standard, Faithful, Landscape, etc.
Have I forgotten something under "camera raw preference"? I included "make default specific to camera serial number".
Thanks,
Marcel

See this link for details on camera support in Camera Raw versions:
http://blogs.adobe.com/lightroomjournal/2012/03/raw-support-in-lightro om-and-camera-raw.html
Snip taken from link above:
You’ll also note that ACR7, available with Photoshop CS6 beta, is lagging the most in updated camera support. This is based on when we lock down or “bake” the code for each release. Even though ACR7 was only released last week it was “baked” before Lightroom 4.0 and Camera Raw 6.7. Similarly, Lightroom 4.0 was finalized before Camera Raw 6.7. We’ll get Lightroom and Camera Raw in sync soon but in the interim, here’s the latest incremental support list for each product, relative to Camera Raw 6.6 and Lightroom 3.6:
Photoshop CS6 beta with ACR7
Canon PowerShot S100V
Fuji FinePix X-S1

Camera Raw 5.5 will not install? And Camera calibration button question.

I just built a new computer with 7 PRO and installed all my software. So when it comes time to instal 5.5 raw it goes about half way through and tells me to shut off Bridge. As far as I know the bridge window and program are off and not running. I even unpined it off the taskbar.
In CS4 when opening a Raw file and I go to my camera calibration botton there are only two options that come up, Arc 3.3 and 4.4. Where are all the other options at? Do they come with the 5.5 update? Thanks Keig

Keiger wrote:
As far as I know the bridge window and program are off and not running. I even unpined it off the taskbar.
Odds are you've got Bridge set to auto-launch at startup...make sure it's not running when you try to install the update.,.and yes, the update should install the addition DNG Profile options.

Camera Calibration in RAW converter CS5

Similar Messages

Maybe you are looking for