Camera case washes out camera flash

I like to use a flap case on my iphone to protect the front glass as well as the sides and back, but I can't find a phone case that doesn't cause the flash to turn the photo flat and grey.
When I take the same shot without a case, the flash works well but with the case on, the photos are useless.
I have tried to cut the lens/flash hole in the case bigger, but this didn't work.
Can anyone suggest a case with a front flap that also allows the camera flash to work without interference?

Same issue. Phone is 3 days old. The flash triggers prior to the lens on the camera. The result is black or nearly black pictures when there is low/no light

Similar Messages

  • I sight camera colours washed out

    The colours in photo booth are very washed out.....even in bright conditions....and with both filters on normal.
    Does anyone know where the controls are,so I can boost the image to normal.
    Thanks

    Hi
    There are no controls.
    But there is this iGlasses http://www.ecamm.com/mac/iglasses/
    Tony

  • Lightroom's interpretation of camera raw data washes out colours

    After I import images from my Canon 5D, they look different when I go into the develop module. I read the FAQ and I understand that this is caused by the difference between the stored thumbnail on the camera and the way lightroom interprets the raw image data.
    The problem is, the tone and colour are always far superior in the camera thumbnail interpretation, and I spend considerable time on Lightroom to try and get the image back to how it originally looked on the camera thumbnail, usually unsucsessfully.
    Is there a way I can get lightroom to match exactly the look of the previews stored with the raw file on the camera?
    It is a big problem, because after lightroom interprets the data, skin tones look washed out and the colours are not as rich or natural looking.
    I don't have this problem on other raw converters, and it is making me look for another software solution if I can't resolve the problem.
    Help!

    Well, my eyes must be doing some wonky things then... because in my experience its LR that is cheating me on the colors.
    Yes... Canon many times oversaturates the colors... but I'm pretty sure that those red cherries I took a picture of were not pumpkin orange as LR shows them. ACR has some serious hue shift problems, yet not for everyone... it varies from camera model to camera model, and even within camera model from camera to camera.
    The best we can do, since ACR isn't intelligent enough, is to fiddle with the calibration settings, and save that as the new default for the camera. (There are scripts that help do this if you have a Color-checker and CS2/CS3... but are of no help if you use only LR or Elements.)
    Never expect the default settings in RAW (for ANY converter... Canon's included (with execption, perhaps of Zoombrowser)) to match the preview you see on the camera, or the out-of-camera jpeg. Adjustments will need to be made. Unfortunately in ACR, this means hours of messing the calibration sliders, much trial and error, and perhaps multiple presets to help with different lighting conditions.
    That said... I too would like to see ACR improve in this area... but for the mean-time this is the best we can do.
    edit: (I'm (slightly) exagerrating the extent of the shift above... but its VERY noticable... and can be very frustrating.
    This site: http://www.photoactivity.com/Pagine/Articoli/023%20Calibratori%20al%20sole/Calibratori%20 al%20sole_en.asp explains in more detail than I understand some of the calibration scripts... and even has some screenshots of a color-checker comparing ACR defaults and various scripts to the color-checker. I'd guess the shifts I see are comparable to some of those shifts seen on that page.)

  • Washed Out Colors When Digitizing From Mini-DV camera

    Instead of renting a deck, I figured I'd just use a mini-DV camera to digitize some footage. The reasoning I'm using, is that there is NO DIFFERENCE in quality between digitizing mini-DV footage from a professional deck vs just a mini-DV camera. Is that correct?
    The problem is that the footage on the LCD screen on the camera looks great. Vivid colors, solid blacks, great contrast. However, when I digitize into FCP 7 (Snow Leopard) the footage becomes murky. Washed out colors, milky blacks and hence it looks a lot more low-res than what I'm seeing on the camera's LCD screen when it digitizes.
    Now, my first thought is that the screen is just compensating with more saturation and contrast. However, I'm also worried that somehow the footage isn't being brought in properly. I'm using the standard NTSC DV Anamorphic preset and capturing that way. Is there some gamma setting along the way could have affected the footage.
    As it looks great on the camera's LCD, I'm wondering if there isn't some capture setting somewhere. Otherwise, I'm going have to boost the saturation and contrast to try and make the FCP footage match what I'm seeing on the camera.

    It's all there in my initial inquiry.
    Kind of...(let's not forget that your profile still lists G4 / Mac OS 10.4.2)...these details are important.
    We ask for specifics, because often users have inadvertently tweaked settings, or run Software Update or some other upgrade, that can affect the system as a whole, particularly FCP.
    Things like... exactly which version of QT are you using? Snow Leopard loads QTX (QT10) by default, which can cause it's own issues. It is possible to load QT7 additionally, but it will go into your Utilities folder (you should be able to move it to Applications), but since I'm not versed in SL, I'll not speculate whether it's an issue for you or not.
    That's one example. So, please give us exact versions/info on...
    OS/FCP/QT
    Capture and Sequence settings (just to make sure)
    How is the camera connected?
    How are you currently monitoring your captured media?
    K

  • I had my iPod 5th generation in the wash for about 3-5 minutes, i took it out of my jacket and made the mistake of trying to turn it on. The first time it came on, then never came back on, its been in rice for 6 days, should I try anything else?

    I had my iPod 5th generation in the wash for about 3-5 minutes, I took it out of my jacket and made the mistake of trying to turn it on. The first time it came on, then never came back on, its been in rice for 6 days, should I try anything else? Please help!

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              
    Apple will exchange your iPod for a refurbished one for $99 for a 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
      Apple - iPod Repair price             

  • Grainy/washed out beta cam footage

    Our company has been using Media 100 for a number of years now. We have been testing out Final Cut and Avid as upgrades. In putting together a project in Final Cut, I brought in both DVCam and BetaCam footage (I digitized the BetaCam through our Media 100 break out box and Firewire cable for DVCam). The DVCam footage looks great, but the BetaCam footage is grainy and washed out. Any ideas what I'm doing wrong to get this result and how to remedy it?
    Power Mac G5   Mac OS X (10.4.4)  

    No. The clips look fine after Media 100 export. The graininess comes after FCP import. What type of break out box do others use for FCP if they shoot on BetaCam? I was in hopes of getting more feedback; thanks for the reply.

  • I am finding flash pictures on my 4s are washed out. What am I doing wrong?

    Why can't I take flash photos without finding washed out?

    Check to see that your rear camera and flash are not being obstructed by your case, and that there is not protective shipping film over it that needs to be removed.

  • Can a Panasonic HD Camera be used with Adobe Flash Media Live Encoder 3.2

    Can a Panasonic HD Camera be used with Adobe Flash Media Live Encoder 3.2 instead of my Laptop webcam.

    yes it can but you need an in/out device to "link" the HDMI output from your HD camera to your computer via, USB or firewire
    BlacMagic sell those, Matrox and AJA are some of the other brands on the market.

  • NAC CAM/CAS Temporary Certificate expired

    Hello Guys,
    I have a high availability pairs of NAC(CAM/CAS), Last 3 months I generate temporary certificate and now it is expired.
    Do I need to generate again a new temporary certificate and delete the old one? Is there any certificate that can give me lifetime certificate?

    Hi,
    Yes, 4.8 has been out for a bit now. Download it here: http://bit.ly/dwaXlc
    Release notes, including the new features, the bug fixes and the upgrade instructions for 4.8 are here: http://bit.ly/9inkeW
    HTH,
    Faisal
    If you find this post helpful, please rate so others can find the answer easily

  • Z1 Camera case

    Has anyone been able to get hold of the new Camera case for the Z1 yet o know where I can get oen from.
    http://www.sony.co.uk/product/dcc-cases/spa-acx2
    It says its still out of stock but I was told it would be available as from today but no luck. Would make it so much easier to use the QX-10 lens.

    It says In Stock 
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Where can I find a camera case for my iPod touch 4g?

    I have found many cases for the iPhone 4/4S that are camera cases but I don't have an iPhone. I'm looking to find a camera case for my iPod touch 4th generation.

    I've found cases for the iPhone that have little 8x zoom lens and cases that can attach a DSLR lens to your iPhone. I'm trying to find one for my iPod touch but cant find any.
    Yeah I've checked the apple store. Unless they just added it today I can't find one.

  • I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is  2010and does not read my camera,  I went out and downloaded the new one and it does not link to adobe photoshop cs5

    I have moved my Photoshop CS5 to my traveling computer,a Surface Pro 3.  I have photoshop loaded but in trying to look at raw images it says my camera raw does not support the sony alpha 65 which is what I have.  I went out and tried to download the newest raw version and even went out and did a zipfile download and it will not update my current version.  What should I do

    I have 6.0.  Tried to download newest verion and it will not download.  Went out and then downloaded a zipfile and it still will not download, thus cannot look at my raw pictures.
    Thanks, John
    m: gener7 
    Sent: Thursday, December 11, 2014 6:01 PM
    To: JOHN STAHLY
    Subject:  I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is  2010and does not read my camera,  I went out and downloaded the new one and it does not link to adobe photoshop cs5
    I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is  2010and does not read my camera,  I went out and downloaded the new one and it does not link to adobe photoshop cs5
    created by gener7 <https://forums.adobe.com/people/gener7>  in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/7007148#7007148>

  • Lumia 620 Photos with Flash Washed Out?

    May I find out if this is normal or there might be a fault with my phone? I'm running the Amber update on Lumia 620
    The photo on the left has flash turned on and it is noisy and off color. Using flash appears to give the photo a washed out / instragram look.
    Both photos were taken in natural light.
    Attachments:
    lumia620_flash_comparison.jpg ‏43 KB

    hi mate, i have experienced some of the issues that others have faced here with the Amber update. the Amber update bought even more saturated colouring, and apparently there will be a return to natural colours in the upcoming Lumia Black update, due to land in early 2014.

  • Why is the camera icon grayed out in the text message screen so that I cannot text a picture on my iPhone 5?

    Why is the camera icon grayed out in the text message screen so that I cannot text a picture on my iPhone 5? I have an unlocked TMobile phone. My husband has the same phone, plan, and set up; his picture messages work fine.

    Check this it maybe the problem
    Settings > Messages > MMS Messaging > is it on?
    Hope that helps

  • Open camera raw greyed out in Bridge

    I reinstalled my CS3 Photoshop and Bridge after replacing my hard drive in my Macintosh Pro desktop. All works well until I tried to use Bridge to open camera raw. "open camera raw" is greyed out and there is no way to open those files in Photoshop.
    Everything in the rest of the software seems OK.
    Thanks for any advice from you folks.
    Greg

    Bridge: Apply all CS3 updates in order, bottom to top.
    Photoshop Version CS3 (not CS3 International), Start from the bottom with Buffering Extensions, 10.0.1 update, and you can go all the way to Adobe Camera Raw 4.6
    If you have a camera models beyond what's supported in 4.6 and your OSX is 10.7 or later, download the 8.7.1 DNG converter.
    Camera Raw: How to use Adobe DNG Converter - YouTube
    Gene

Maybe you are looking for

  • How to turn waste into a sundry stock item in SAP B1

    G'day folks, This is my first post ot the SAP B1 forum, and probably wont be the last. So far I've used this forum to resolve most problems, but I have an issue with I havn't seen to date on any thread. Two of the 6 companies I'm implementing in SAP

  • Adapter Module to terminate module chain processing PI7.1 (File Adapter)

    Hi All, I have a file in a FTP location that needs to be picked up ONLY after a trigger file is found. I have tried 2 ways using OS commands and BPM but both do not suit my need . I have now decided to write a java adapter module. This is in PI 7.1.

  • Graphic showing JavaScript loaded external to db (performance benefits)

    Greetings Everyone! I am in need of a link to the graphic, which shows the benefits of loading JavaScript libraries external to the database/application. I have it somewhere but I cannot find it. I need it because my companies IT staff insist that I

  • Priority field in the production order

    Hi folks, i want to use the priority field in the production order header screen. when i read the help text. i saw that  the information can be passed from the sales order for an assembly order. so where shoul i enter a value for this priority field

  • Partner determination procedure assignment not possible

    Hi All, 1) I had created the partner determination procedure 2) Created partner function in procedure But while doing partner detremination procedure assignment i am unable to that and not able to create the new group customer account group, while do