Camera changes light levels on its own!

It's time for a firmware update! This camera has a random problem of raising and lowering the light levels on its own and causing motion detection!

I've notice that a How about it Linksys when are you folks going to fix the firmware?lso and also reported seveeral more probles with the 2008 R24 firmware . Noone seems to listening from Linksys!
joe

Similar Messages

Ahh..screen for no reason lights up on its own...

It just started happening the other day but today its been happening more and more. My phone will just light up on its own for no reason at all. Sometimes the message will pop up, "Do you want to turn Airplane mode on?" I've tried totally resetting my iPhone and have reloaded all of my stuff back on and it is still lighting up on its own. Also, it will not let me shut it off, I will shut if off, but right away it will turn back on. When I go to try and reset it by pushing the home and sleep button at the same time and holding it, it will just ask me if I want to shut it off. My warranty that came with my phone through apple is up, so hopefully I can get some help and fix this so I don't have to buy a new one yet! lol My main concern for my phone doing this is that it kills my battery. Please HELP!
Thanks

Did you ever figure it out? I have a phone that does the exact same thing.

Itunes changes genre information on its own

Often I find that when I begin playing a song, iTunes will change (or have changed prior to launch) the information that I have already stored for that song. i.e., if I double click a song to play it, iTunes will change the genre to something else on its own, and then I have to go and change it again to what I wanted it to be. Is there a way to turn this off, or prevent it from happening? It's really causing me headaches.

I literally just noticed this. Played a song out of music and was like "***!" as I watched it immediately change the genre. Opened info and changed it back. Dbl-clicked to play it and watch it change AGAIN.
One artist, with 9 albums, all bought in iTMS. ALL exhibit the same behavior. Just bought their latest album VIA AMAZON, did everything I usually do after buying an album - select full album, open info and change everything to what my smart playlists expect. Closed. NONE of the songs change genre on play.
So, this issue only appears to be w/ songs purchased from the iTMS. I did seem to figure out how to stop this at least. Instead of changing the genre in the info dialog, change it FOR EACH INDIVIDUAL SONG in the music list by editing the genre cell for that song. ROYAL PITA but it seems to stick at least for now.
Since I usually buy an album, edit for smart playlists and then listen via playlists, I can only imagine HOW MANY OF MY SONGS I'VE GONE TO THE EFFORT TO TAG THAT HAVE BEEN CHANGED WITHOUT MY KNOWING. WHAT IS THIS!?!?! WINDOWS?!?!? IF YOU'RE GOING TO DO THAT, DON'T LET US WASTE OUR TIME EDITING FIELDS!!!!
So. Anyway. Hope that helps you out Bri Guy. I now have to track down all songs from the last 5 years apparently and manually fix each one by hand.
Needless to say I will NEVER buy any music from the iTMS again.

I am having issues with adjusting the duration of time for each still frame and transition in imovie 11. Each time that I adjust these times, the app does not accept the change, and automatically enters its own time. Am I doing something wrong?

I am having issues with adjusting the duration of time for each still frame and transition in imovie 11. Each time that I adjust these times, the application does not accept the change, and instead automatically enters its own time. Is there a work around this? Or am I doing something wrong? Please Help!
Thank you,
lagrl

Have you tried turning off automatic transitions ? Choose file - project properties and follow the dialogue box to change duration with a slider. iMovie also doesn't allow a transition to be more than 50% duration of the clip its attached to. In other words if the clip is 4 seconds the transition cannot be more than 2 seconds and remember that relates to the first clip as the following clip (right side) is pulled back to overlay it.
Does this help. Perhaps you already know this ?

Macbook pro changes user picture on its own . Help please.

Does this mean I have some sort of malware?
Reccently my mac started changing my user photo on its own. Even more strangely the photos are only from photobooth.

You likely have a corrupt cache file someplace in OS X.
12: OnyX cache cleaning
This routine cleans all possible corrupt caches, doesn't delete your data or programs.
Apple doesn't include a easy for the user, system wide cache cleaning process in OS X, something they need to consider implementing.
So we have to depend upon third party software to do this and the best, time tested and free one is OnyX
Sometimes a corrupted cache file can cause strange behavior, slow machine, Dock and fonts doesn't work, beachballs effect, something won't install, Safari acting up etc., just general strangeness that can't be explained. Web browsing slow when all the other machines are fast etc.,
Use the free OnyX matching your OS X version and run all the initial checks
Run all the maintenance and cleaning aspects (except don't delete the log files) and reboot at the end (must)
If any of the initial checks OnyX does gives a warning, then Stop and report, you have a serious drive or other issue.
This will give OS X a enema of sorts (won't delete file or programs) and let it rebuild all the cache and other files, including Spotlight.
You must be through running all the maintenance and cleaning aspects as this is a "catch all" method and any number of corrupted caches may be responsible for your issues. Don't worry, OS X will work fine (and likely faster again) after the caches are cleaned out and rebuilt from their original sources provided you REBOOT when finished using OnyX.
http://www.macupdate.com/app/mac/11582/onyx https://en.wikipedia.org/wiki/OnyX
List of proven OnyX successes:
https://discussions.apple.com/message/18377471?ac_cid=sa123456#18377471
OnyX also has a Verify > Preferences
(plist) file checker, show the corrupt ones and write them down. So while your in OnyX cleaning your caches, check for corrupted plist files too for the next step below.
Step by Step to fix your Mac

Data Source path in Pivot Table changes to absolute on its own

Hello.
I have a .XLSX file, that was created long time ago (I don't even know in which Office version, but definitely not 2013), and maybe even was a .XLS file at first.
So it's a 4 MB file with 16 Sheets and 8 Pivot Tables.
All of the Pivot Tables use other sheets from the same file as Data Source.
Data Source for some of them look like this: 'Sheet3'!$A:$E
Everything is fine when I save the file, and open it from saved file.
But as soon as I try to move the file elsewhere, or rename it, or email it - all Data Source paths change to something like this: '\Users\Sergii_Litnevskyi\Desktop\New folder\[FileName.xlsx]Sheet3'!$A:$E
And it happens with all Pivot Tables. The problem is that it links to an old file path, where the file does not exist anymore. And it links to an external file, which is not what I want.
If I Save As and select different path and filename - then it works fine. So it's a workaround for renaming and moving files, but not for sending them to other persons.
I've read some threads, and people recommend disabling "Save external link values", but it does not help. It is already turned off in my office, but it keeps acting weird.
So what I need is: Save the file, close it, rename it, move it to other place, send it over email as attachment. And then I want to have the same Data Source path in my PivotTables as I had before I saved the file. How can I do it?
My Office version: Microsoft Excel 2013 (15.0.4454.1503) MSO (15.0.4517.1005) 32-bit

Hi,
According to your description, I suppose the issue may be caused by some reason.
Do you link the outside data source?
I think if the file moves the file elsewhere, or renames, or email,
data source paths can’t be change.
But, your data source paths add the absolute path.
Do you link the outside data source?
I recommend you zip the file and send it as Email attachment.
If the issue exists, you may save as it in a new name and test it in another computer.
Regards,
George Zhao
TechNet Community Support
I am pretty sure that I don't have any external links in the document.
However, even if I did - why would it change Data Source path for all of the Pivot Tables, when I did not request it?
I tried zipping it and sending to other person over email, but he got the file with changed data source paths.
I can even record a short video to show what happens.
Actually, I just did it. You can see the video here: http://screencast.com/t/qMBild3ck9b
It is rather big - 23.8 MB.
Let me explain what I showed there:
I opened my original file. I showed that there are Pivot Tables, whose Data Sources are in the same file, on various other sheets.
I showed this for all of the Pivot Tables in the document.
I saved the file using Save As in a different folder and under a different name (TEST.xlsx).
I then opened that saved file to show you that it is fine, and the Data Source path for one of the Pivot Tables is the same as it was in original file. It is the same for all of the other Pivot Tables.
Then I closed, and simply renamed the file to TEST123.xlsx.
Opened it, and first thing wrong - Security warning.
Then I got ‘Cannot open PivotTable source file ….’ messages. And, as I showed, now all Data Source paths have been changed to full paths of the file, that was created by Save As (TEST.xlsx) from original file.

Mac's name changed to "machinename" on its own

Hi all,
Ever since I got my Mac Pro at work it's been called njintelmacpro. The other day, out of the blue, it's called machinename. In the sharing system preference I get this:
Other Macintosh users can access your computer at afp://10.32.53.127/
and then a second later it changes to:
Other Macintosh users can access your computer at afp://machinename/
The name in the Sharing System Preference is njintelmacpro!!
From the same dialog:
Other computers on your local subnet can access your computer at njintelmacpro.local
When I do a "set" in Terminal I get this:
HOSTNAME=machinename
Now, how is it that the Sharing System Preference says njintelmacpro but the name of the machine is "machinename"? It's driving me nuts.
Is it getting the name from somewhere else? Thanks.

Not sure of this of course, but I think something is kicking out a process, then it come back with the default when it can't read/do whatever it is... logs may show something.
Might try logging out and back in to see if it changes... or create a new user for a test.
At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.

Country grouping changed from '99' to its own grouping.

Hi Experts,
We are planning to change the international country grouping ('99') for some of the countrties to their respective country groupings (say '20' for Norway, '23' for Sweden ). Currently the countries attached to international country grouping are working fine.
Now, if I have to change the grouping as mentioned above, what are the things I have to take care? Can you please provide me the detailed checklist for the same?
Also, we are not using Time and Payroll for international countries and it is taken care by a 3rd party vendor.
Thanks & Regards, SWapnil Mishra

Hello,
To get the correct grouping value assigned to employees feature IVWID (and IGMOD) need to be configured properly.
Then to correct/update employees data the following report will need to be run
Programs RPUFACECPRFN and RPUFACEVIEKN and program RPUFIXDS correct the missing fields on personel numbers.
See notes 845592 and 783499 (they refer to CE and activation of old and new framework but I think it will help also in your case).
Best regards
Sarah

Main "Play Control" volume changes on its own when I open and close WinDVD or Winfast

Main "Play Control" volume changes on its own when I open these programs, and when they're closed the main volume resets to where it was before the program was opened.
Surely I'm not the only one who has had this problem before.. I've had the problem with both Creative soundcards I've owned, before and after different drivers installations.
It can be very irritating and can potentially lead to damaged speakers if I'm not paying close attention to what my various volume knobs are set at before and after I open these programs.
I appreciate any and all input, thankyou.

I had to edit to reflect its Mavericks 10.9

ITunes Automatically Change EQ Setting Based On Which Airport Express Streaming? I have two Airport Expresses running at my house. Both are connected to different types of speakers. Neither speaker set has its own equalizer, and both require a different

I have two Airport Expresses running at my house. Both are connected to different types of speakers. Neither speaker set has its own equalizer, and both require a different EQ setting to sound just right. Does anyone know of a way to have iTunes automatically change its EQ setting based on which Airport Express it is streaming to?

I'm in the same boat. I have a 6 zone amplifier running with 6 airport expresses to different rooms inside and outside the house. Each has it's own acoustic characteristics. I'd really love to be able to set each airport to equalize based on my SPL frequency sweep I did for each room.
Setting the eq in itunes won't do it as that is global plus I have many more sources for auiod other than itunes that use the AEs directly.

TS2784 I have set my iphone5 time settings to automatic New York time. Throughout the day the clock keeps changing times on its own by hours. Sometimes in is correct. Sometimes it is wrong.

I have set my iphone5 time settings to automatic at New York time. Throughout the day the date and time on the phone keeps changing on its own and often by a few hours. Sometimes it goes to the correct time. Sometimes it is way out. Is there something wrong with my settings?

This is a known issue with the iPhone 5. Turn off the automatic time setting for the time being. It will most likely be corrected in an upcoming update to iOS if the tech press is to be believed.

Why are my lighting levels changing?

Yikes! I'm on mac with Premier CS6 6.05. Files are AVCHD. It started with just one file loaded onto the timeline in which the lighting level changed. Now, I just got done adjusting audio levels in the timeline on other clips and there lighting levels have now changed, all getting darker. I am a new user, a teacher, and just started using premier pro with my TV students. Sure hope I didn't make a mistake. Thank you!

Thanks for the added clarifications Noel. Can you perhaps explain to me how the behaviour of the color sampler in the info palette is actually desirable?
Let's look at my example again. When I am trying to make an adjustment and I'm looking at my color sampler targets, I _must_ have my adjustment layer selected. Target #1 is pointed over a white pixel. Regardless of which layer I have selected, that pixel is white. I can't imagine a scenario in which the readout should be anything other than 255,255,255. That's not a feature, that's a design mistake.
If I want to see, in the readout, the value of the background image's pixel, then I should hide the layer that contains that white shape. Then, that pixel is no longer white, and the color sampler readout should reflect that. Makes sense.
If you truly and honestly believe that users are interested in the color that is a result of compositing all the layers below (and including) the currently selected adjustment layer when they are plaing with the adjustment layer controls, then the UI must temporarily hide any layers above that color sampler as soon as I select the adjustment layer. This is the only correct UX design in that scenario - so that the color sampler once again reflects exactly what is "true" - namely the pixel color on the screen that it is sampling.
And if you re-read that last paragraph you will intuitively know that that would be crazy. I mean, there's no way that a user would want to have the UI hide any layers just because he's clicked on the Adjustment Layer - he probably wants to see the adjustment in the context of the entire composition. If he wanted to hide those other layers, he'd do it himself.
I urge you to reconsider this from the perspective of a real-world user and consider logging this as a bug. I just can't see any way that it isn't a mistake.

Sound input changes on its own

Hello,
I'm having some trouble with my sound input in the system settings. I want to use my internal microphone to record into QuickTime, but it occasionally changes itself back to the Line In on its own.
I have other applications open while doing this, including iTunes. I'm using QuickTime to quickly record my music practice while using iTunes to play an accompaniment. I don't know whether or not that has any bearing on why this might be happening.
Thanks for your attention!
Dave

Hey guys, this is really annoying!! Could anybody please help us here... Appreciate your time a lot.

My earphone sound have reduced of its own and reached to a level where now its very difficut to even hear through. how can i get it replaced.

my earphone sound have reduced of its own and reached to a level where now its very difficut to even hear through. how can i get it replaced.

verify tthe issue is with the headset by trying them out in another device which use the std. 3.5mm minijack all computer does and mp3players and you name it
if it's the headset then it's under the same warrenty rules as anything else and will be replaced in the same way you would an iphone or ipad

Screen brightness changes on its own

My laptop screen brightened all of a sudden on its own, 1/3 - 1/2 EV. I was editing a photo in PSCS3 when this occurred, the photo was from Lightroom. The brightness change effected everything, not just PS. For the past several days I've been editing photos in LR & thought I had the tone adjusted pretty good on all the photos. Today when I looked at the photos again, I felt like I needed to brighten then up some. After making exposure/brightness/tonecurve adj. to the photos today, I needed to do editing in PS, and as I was editing, the screen made a brightness change. I recalibrated the monitor & the brightness stayed the same. How could the previous monitor profile be turned off & all of a sudden turn itself back on. Windows Vista on Sony Vaio laptop (yeah I know I need something besides a laptop screen to edit photos). This probably has nothing to do with PS but I thought I would try on this forum as it's usually very helpful. Perhaps you can suggest another forum that might help. Thanks!

Sometimes a power management scheme will kick in on a laptop and change the monitor brightness. When editing you should always work with external power connected and all settings set at Never for that state.
And, if you're serious, get a good monitor!

Camera changes light levels on its own!

Similar Messages

Maybe you are looking for