Camera connection kit stopped working after last update

After the recent update to ios 8.1.3 my Apple Camera connection kit has ceased to work, any one got any ideas why and a possible solution?

Is this a genuine Apple-made CCK or a third party one?
Some third party CCKs are not compatible with iOS 8.

Similar Messages

  • My camera connection kit stopped working after I upgraded to  ios5

    My camera connection kit stopped working after I upgraded to ios5. If I plug it in to my iphone I get a message saying it is not recognised, but when I plug it into the ipad it does nothing at all. I've tried resetting it, but that makes no difference.
    I have an ipad 1 which I bought because it had lots of storage. I'm going on holiday soon, and I want to be able to upload my holiday photos to my ipad while I'm away.
    Any suggestions?

    Actually this sounds the same problem I have on my iPad2.
    I use a cheap copy of the CCK which I got off eBay.
    It worked great when fitted with a 16gb SD card, but since I upgraded to 5.01 it has stopped working.
    Sorry, no solution at this point but it worked on 4.3.3 but not on 5.01.
    I'll keep on looking, was considering a proper CCK thinking the cheapmversion may be drawing too much current, but it sounds like that might not work either.

  • Why did my camera connection kit stop working after updating to iOS 6.0.1?

    Camera connection kit stopped working on ios6.01 updated phone. Same camera kit works on the iPhone that I did not update. Why does it not work with 6.0.1?

    The same story. No 3G after updating to 6.1.  Told my daughter temporarily not to do an update on her iPad with 6.01. We've exchanged SIMs. I inserted her SIM in my iPad - 3G appeared immediately. And my SIM in her iPad with ios 6.01 also WORKS FINE. We use the same provider - Megafon Moscow. After attempting to revert SIMs to original configuration, 3G disappeared on my iPad again. Don't know what's going on with SIM during the update to 6.1

  • Camera Connection kit stoped working after a few hours. Now won't comunicate with any device.

    I bought a Camera Connection Kit to connect to a camera and a MIDI keyboard. It worked for about 2 hours just fine. Let sit for 30 min. When I came back, nothing worked. Retured kit to store in exchange for new one. Same problem with new one. ipad shows kit connected but it will not recognize that a camera or a midi keyboard is connected. Ipad still synks with iTunes.

    I have the same problem, but instead of waiting a few hours for the problem to occur, it happens in a few minutes.
    My machine is a MacBook Pro (Retina, 13-inch, Late 2012):
    2,5 GHz Intel Core i5
    8GB 1600 MHz DDR3
    Intel HD Graphics 4000 1024 MB
    I've just reinstalled Yosemite and the problem is still present. Someone have an idea of what is this problem? I use my notebook for work and I need it fixed ASAP!
    Next monday I will take it to an Apple Service and see what they can do.
    Thanks in advance!

  • Screen sharing stopped working after last update

    Hello all,
    I have run software update yesterday, and there were about 10 downloads (I run this weekely, so these must have been new ones). The thing is that after installing all the updates, one of the features that I use more frequently, screen sharing, stopped working properly. I have a Mac Book Pro and an I Mac, both running on Snow Leopard, and screen sharing has always worked just fine, but not after the latest update.
    I checked passwords and they are all right, and also checked sharing properties and all seems to be fine. I can share files all right, but for screen sharing now is only possible by setting the option "anyone may request permission to control screen" (under sharing>screen sharing>computer settings) to on, and ask for authorization each time I need to share screens, not good, mainly if you have the computers in different rooms.
    Finally, I own an Me account, so I tried sharing screen via Back to my Mac, but it didn't work either.
    Can anyone help?
    Thanks a lot,
    Luis

    Problem solved!
    After working with Apple, I have an answer. It looks like the 10.10.2 update changed your firewall settings. Try this:
    System Preferences>Security and Privacy>Firewall Options
    Scroll down the list till you find "screensharingd". If it's marked as block in coming connections, change it to allow incoming connections.
    Be sure to reboot your computer and you should be good to go!

  • My Logitech K750 numeric keypad stopped working after last update-numbers only

    After the last Mountain Lion update, the number on my numeric keypad will not function.  They work for my login, but then become inactive.  I have tested the system with an Apple keypad, same thing!  What happened?  Is there a keyboard setting that needs to be reset?

    Dianefromblaine,
    Thank you.  My K750 number pad stopped working on my iMac.  The keyboard and number pad 'do' work on a different Mac, so I suspect it is some setting on the iMac.  I did a Safe Mode start, reset the SMC, and repaired the disk permissions.  The dongle was plugged into an USB Hub.  It is now plugged into the iMac USB port.  The keyboard has a 90% charge, but still does not work.  Then suddenly it started working again, but stopped after about one month. 
    I found your "Accessibility>Mouse and Trackpad" suggestion and deselected "Enable Mouse Keys".  My number pad works again.
    Thanks.

  • Command line option "-save-to-folder" stopped working after last update: Any workaround?

    Running FF on Linux, I was using the -save-to-folder option at CLI to write a copy of the webpage to file with JS content rendered. Worked great until the recent update (to v.27.0.1).
    Typical format was: firefox url -save-to-folder filename
    When things break, the fixes sometimes happen quickly, sometimes not. In the meantime, anyone have a workaround?

    [http://ubuntuforums.org/showthread.php?t=2210953&p=12955762#post12955762]?
    It will depend if your Linux build was compiled by a third party. Typically if a function like that stops working, uninstalling might be a good option, but maybe not in this case.
    The full list are [https://developer.mozilla.org/en-US/docs/Mozilla/Command_Line_Options] is this one custom perhaps?
    There is an add on [https://addons.mozilla.org/en-US/firefox/addon/save-file-to/ Save file to] that adds a dialogue, but you may want to stick to linux. There is a customize shortcuts [https://addons.mozilla.org/en-US/firefox/addon/customizable-shortcuts/ add on]
    -recording-output may be something you can try. Or make a bug! :-)[bugzilla.mozilla.com]

  • HP Support Assistant stops working after last update

    message says                                                                                     
    hpsf.exe has stopped working
    HP ENVY 17-2070nr Notebook PC windows 7 64 bit
    This question was solved.
    View Solution.

    Hi,
    Try the following
    First of all, uninstall your current version of HP Support Assistant by using the Microsoft 'Fixit' on the following link - this is particularly useful in correcting issues that may prevent reinstallation on machines running a 64bit OS.
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    When this has completed, restart the notebook.
    Next download and install the latest version of HP Support Assistant from the page on the link below - the download links are towards the bottom of the page.
    http://h18021.www1.hp.com/helpandsupport/hp-support-assistant.html
    After the installation, restart the notebook again.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • ITunes stopped working after last update

    I got an update for iTunes yesterday. Now when I try to open it I get an error message "iTunes has stopped working" and the program closes. Any clues?

    Hi Pam,
    Take a look at the article below, it will help you isolate the issue and then provide some suggestions that should resolve it.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    If that doesn't help, just reply with details about what you're seeing.
    -Jason

  • Middle-mouse paste function stopped working after last update

    I think FireFox was updated last night. Ever since then my middle mouse paste function doesn't work any more.
    I haven't installed any addons or changed settings either.
    I'm talking about: about:config > middlemouse.paste = true
    I've tried toggling it etc. but nothing I can do changes it. Any ideas?

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • TC guest network stopped working after last update

    Hi, I got the new 2TB TC. And it was working fine. Since I updates it to 7.7.3. The guest network stopped assigning IPs. I can see it and change the settings but I can't join it anymore. It was working fine before.
    I Am setting it from iOS devices not a Mac.
    The TC is in bridging mode.
    I Also tried restoring it to default settings.
    Any ideas how to fix this?
    Thank you.

    I had it working right out of the box when I bought it, there was no double NAT warning or error message, unlike now I have to ignore the double. NAT error message for the light on the TC to turn back to green again.

  • Ducking stopped working after last update

    I had a project I created last summer where I used the ducking feature throughout. It was working great. The sound clip was at full volume, ducking was selected, and as desired and selected all other clips were reduced to 15% volume.
    Today I opened the project and played through. The portions where ducking was selected are now functioning the OPPOSITE as intended. The sound clip itself is ducked and all the other clips are full volume.
    When in iMovie and click the gear for the clip, it says next to the "ducking" checkbox, "reduce volume of OTHER tracks to 15%". It's in fact reducing the volume of itself to 15% and having NO effect on the other tracks.
    Is there a solution to this?
    Please, I already know of several workarounds... what I want to know is what caused this and if there's a real solution.
    Thank-you.

    sparky67 wrote:
    When in iMovie and click the gear for the clip, it says next to the "ducking" checkbox, "reduce volume of OTHER tracks to 15%". It's in fact reducing the volume of itself to 15% and having NO effect on the other tracks.
    Hello sparky,
    I have encountered the same problem (although I cannot say if it is due to a recent update).
    And unfortunately, I do not have any idea what might have caused this or how to resolve it.
    What makes this so weird is that I have other iMovie projects on the same machine using the same type of source files (DV video clips and separately recorded voice-overs in WAV format) where ducking works flawlessly - with the same settings.
    I would really be grateful for a hint on what's happening here and how one might resolve this problem - it's a total show-stopper, as I cannot complete the project without pre-mixing all audio outside of iMovie, which would take ages.

  • [Solved] ALSA stopped working after last update.

    I'm using pekwm and a 32bit install at the moment. Volwheel will not allow me to adjust the volume. I can't run alsamixer even though it's installed. My username is a member of the audio group... And when I run alsaconf it will not recognize my sound card (HDA Intel).
    [neruson@megatron ~]$ alsamixer
    cannot open mixer: No such file or directory
    [neruson@megatron ~]$ ls /usr/bin | grep alsa
    alsa_in
    alsaloop
    alsamixer
    alsa_out
    alsaucm
    When I ran alsaconf I got this message:
    No supported PnP or PCI card found.
    Any help would be appreciated
    Last edited by Mr_ED-horsey (2011-09-01 00:53:12)

    Fixed. I reinstalled "linux" and "linux-headers" and rebooted. Everything's working now

  • Why does my camera connection kit not work with my ipad 1 after updating on ios 5?

    Why does my camera connection kit not work with my ipad 1 after updating on ios 5? What can I do to make it work again?

    It should. It will only respond if there's something on the card for it to respond to, so do you have pics on the card?
    And if it's messing up; try giving the iPad a restart. Hold down the sleep and home keys, past when you see hte red power down slider and until you see the silver apple. Let it reboot and try again. That can clear up any glitches on the device itself.

  • Firefox extension: "TrueSuite 5.2.500.16" stopped working after last firefox update (30.0), even though about:plugin says it's enabled. Any fix to make it work?

    Firefox extension: "TrueSuite 5.2.500.16" stopped working after last firefox update (30.0), even though about:plugin says it's enabled.
    i tried resetting firefox and look for similar problems, unfortunately didn't find anything.
    also there's weird blank space before address in address bar
    other extensions and addons seem to be running fine.

    jscher2000, i tried that, i thought it didnt work before, it's just that this time i accidentally closed (and thus restarted) firefox and it worked, thanks man

Maybe you are looking for