Camera could not start in LG handset but same code run well on nokia 6600

Hello !
my MMAPI code run well on nokia 6600 but same code can't implementing in any of LG handsets.
it throws media exception while initializing camera so any one have the solution for that?
premal

Try editing boot.properties file in both Admin server and bi_server1 in these two locations
domain/servers/AdminServer/security/boot.properties
domain/servers/bi_server1/security/boot.properties
Once it is done,Try restarting and let us know the outcome.
Thanks,

Similar Messages

My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.

My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.
I tried to connect to iTune hoped to restore the system but iTunes did not reconige it.

here is link to the apple product feedback website:
http://www.apple.com/feedback/

Could not start SDM Server - another Server may be running already

Hi
I have some problems with SDM after upgrade to SP16.
Right now i can't neither start it, nor change password..
it has an error but i don't understand it, because i have only one instance and the server is stopped.
I'm enclosing the error, please, if you have some ideas let me know.
Thank you.
Oct 10, 2006 12:34:29... Error: ERROR: Could not start SDM Server - another Server may be running already.
Oct 10, 2006 12:34:29... Error: Another SDM is running already for this SDM_HOME directory. Exiting. Throwable: com.sap.sdm.client_server.launch.SDMRunningException Throwable message: Another SDM instance is running on this host
Oct 10, 2006 12:34:29... Error: Could not start SDM. Processing error. Return code: 4

A lot of thanks of your answer (both of you)..
None of the prerequisits of the note exists on my system.
"1)There is a started SDM server on the system. All SDM commands have to be executed when there is no started SDM server. Or SDM port is busy by another application."
Server is on red color. I had reseted all tha instance, nobody use it, any applications.
"2)2. The executed command can be run only if SDM is in standalone mode."
Yes, i ran before the next command: Execute :
sdm jstartup "mode=standalone" "sdmhome=C:/usr/sap/<SID>/<Instance>/SDM/program"
"3. SDM port is busy by another application."
the port is only used for sdm wich is off...
Anyway, in order to get the solution, i started with the steps described on the note, but i had a problem with the StopServer.bat
3.Run
StopServer.bat (for Windows)
When i run it, i got another message (i though a similar one):
"Sending shutdown on port 50018
Shutdown failed: SDM currently runs in monolithic mode. Logons cannot be accepted.
Could not shutdown server.
Details: Shutdown failed: SDM currently runs in monolithic mode. Logons cannot be accepted.
Processing error. Return code:4"
Any ideas?
Thank you.

"Windows could not start this screen saver"

My timeline playback gets interrupted by Windows' dummy screen saver consisting of a blank screen with the message "Windows could not start this screen saver". I'm running Premiere CS 5.5 on Windows 7. I only see this message while Premiere is running so Premiere must be doing something that blocks the current screen saver but doesn't block Windows from attempting to start it. Is there a way to keep Windows from attempting to start the screen saver at all (other than selecting no screen saver in Windows) so it doesn't interrupt playback?
Roy

years ago screen savers helped keep crt monitors from getting 'burned in' areas of dead pixels etc from the screen being on a static image for too long. over the years this problem has been almost totally eliminated by monitor manufacturers i think.
i know people who worked in pro graphic houses that never turned off their computers, never used screen savers, and never did power management stuff ... the computers were on 24/7... and they never had problems.. and that was like more than 10 years ago.
i do have a nice snake screen saver that is static and / or animated if you want to try it out, but frankly, i would turn all that stuff off ( power management, screen saver ) and either leave your computer on all the time 24/7, or else just turn it off when you leave the computer... turn it back on when you want to use it. is only a button on tower to turn on and off usually.. easy.
let me know if you want snakes though... they are very cool and scary !

"could not start the camera. Close other apps and try again"

It shows up saying could not start the camera. Close other apps and try again when i try to open the camera but no other apps are open.
how do i fix this?

Hi.....i am new here and is not sure as yet how to start a new thread.
I have a bb curve 8310 and think i may ave caused my camera to stop working via uninstalling it....if that is possible.
wen i click on di camera it opens, makes shutter sound and flashes wen i click di trackball but after that it doesnt show di picture that it supposedlt took.
Before this happened i was foolin around with the hide a folder option in pictures and not sure what i did wrong.......my video is not clear either.....please can you help me .....in addition i do not get any of those messages that i see the other users saying that they got for example could not start camera....i am not getting anything like that. all dat i get is a white screen......

CURVE 8300 Could not start the camera

We I try to used the camera it gave me a error mesaje "Could not start the camera. Close other applications and try openning the camera again"
Message Edited by jalfaro on 04-22-2008 03:52 PM

I have this EXACT problem with my 8310 Curve too! I've tried removing the battery and rebooting too, but it still does it!
Message Edited by iamosolo on 04-22-2008 03:37 PM

Could not start the camera

When trying to start the camera I get this message..Could not start the camera. Close other applications and try opening the camera again.
I have nothing else running other than the phone itself waiting for a call. I can not find anything on Blackberry support for this issue unless I am missing it.
When I first got the phone a couple of months ago it worked fine and I could send pictures, now it is stuck.
Thanks for any help.
CB
Solved!
Go to Solution.

Some say that removing the battery cover and pushing down around the camera lens will solve this problem. Apparently, it's a hardware issue. If it keeps up, you will likely need a replacement device.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

HT1766 When I started my new iPad 2 I could not start from a previous backup because the os on the new iPad is not the latest 7.x used to backup the previous ipad2 to install the new os I had to start the iPad as new. But now I cannot backup from the pre

When I started my new iPad 2 I could not start from a previous backup because the os on the new iPad is not the latest 7.x used to backup the previous ipad2 to install the new os I had to start the iPad as new. But now I cannot backup from the previously backup ipad

Hi there,
You may find the troubleshooting steps in the articles below helpful.
iCloud: Troubleshooting restoring an iCloud backup
http://support.apple.com/kb/ts4036
iOS: If you can't back up or restore from a backup in iTunes
http://support.apple.com/kb/ts2529
-Griff W.

8350i Could not start the camera

When trying to use the camera on the new 8350i, I get an error message indicating "Could not start the camera. Close other applications and try opening the camera again", even if all of the other apps are closed.
Ideas ???
Solved!
Go to Solution.

Reset the device taking out the battery for 30 seconds, and install it again.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Camera problem: "Could not start the camera. Close other applications and try opening the camera again" error.

Device info
Your carrier: Etisalat
Model info and OS version (Go to Settings, then Options, then about): Bold 9900, OS 7.1
Apps and free space
Did a battery pull fix your issue? No
Apps installed and their version if possible: BBM, Facebook, Twitter, App world, Screen muncher.
BT device model/version (you will have to look at the BT device): (Sorry, don't know what this is).
When writing your question
Any other details that would help us out with your issue:
Good description of what is really wrong and how to reproduce if possible. Details of what you did before:
What is worth a thousand words
I simply open the camera and a pop up saying "Could not start the camera. Close other applications and try opening the camera again" appears and only lets me press okay.
Memory seems to be okay, can't figure out what it may be.
Please, how can I fix this? Any help is appriciated.

I had the same problem with my Bold and tried everything until out of frustration i just clicked the center picture taking button before the "Could not start the camera. Close other applications and try opening the camera again" message came up and believe it or not that solved the problem. Works fine now!

MaxDB (DBM76.EXE) error [-100 ERR_DBMSRV_NOSTART: Could not start DBM]

Hi, I installed the Trial preview 7.01....after that installed DBM76.EXE........but when I tried to ADD DATABASE INSTANCE with Database server <local> & <default> Port...............this error came in popup !!!!
-100 ERR_DBMSRV_NOSTART: Could not start DBM
Plz help.
Ajay.

While doing the smoke test for ERP6.04 ,I am also facing the same error :
ERR_DBMSRV_NOSTART :Could not start DBM
Please help to sort it out.
Regards
HARISH

SDM Deployment Failed--SDM could not start the J2EE cluster on the DB Host

HI,
I am trying to deploy ESS packges in EP through SDM.But while deploying I am getting this error in SDM at the start itself:-
Error: An error occured while starting a cluster instance.
Oct 14, 2008 5:14:41 PM Error: There is no clutser control instance running on host SBPEPDB1 which is described in SecureStorage
Please check if there is an appropriate running cluster instances
SDM could not start the J2EE cluster on the host SBPEPDB1! The online deployment is terminated.
There is no clutser control instance running on host SBPEPDB1 which is described in SecureStorage
I am pasting the full LOG File details:-
Oct 14, 2008 6:32:00 PM Info: Starting cluster instance processes.
Oct 14, 2008 6:32:00 PM Error: An error occured while starting a cluster instance.
Oct 14, 2008 6:32:00 PM Error: There is no clutser control instance running on host SBPEPDB1 which is described in SecureStorage . The instances, returned by MessageServer [MS host: SBPEPCI1; MS port: 3900], are :
Name:JM_T1223989073901_0_CPCAPP109
Host:SBPEPCI1
State:5
HostAddress:172.17.131.38
Name:JC_CPCAPP109_EPP_01
Host:CPCAPP109
State:5
HostAddress:172.17.131.31
Please check if there is an appropriate running cluster instances.
Oct 14, 2008 6:32:00 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Oct 14, 2008 6:32:00 PM Error: Aborted: development component 'pcui_gp/isr/cfg'/'sap.com'/'MAIN_ERP05VAL_C'/'2515722'/'0', grouped by software component 'SAPPCUI_GP'/'sap.com'/'MAIN_ERP05VAL_C'/'1000.600.0.13.0.20080516101947''/'0':
SDM could not start the J2EE cluster on the host SBPEPDB1! The online deployment is terminated.
There is no clutser control instance running on host SBPEPDB1 which is described in SecureStorage .
The instances, returned by MessageServer [MS host: SBPEPCI1; MS port: 3900], are :
Name:JM_T1223989073901_0_CPCAPP109
Host:SBPEPCI1
State:5
HostAddress:172.17.131.38
Name:JC_CPCAPP109_EPP_01
Host:CPCAPP109
State:5
HostAddress:172.17.131.31
Please check if there is an appropriate running cluster instances.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Oct 14, 2008 6:32:04 PM Info: Starting to save the repository
Oct 14, 2008 6:32:05 PM Info: Finished saving the repository
Oct 14, 2008 6:32:07 PM Info: Starting: Initial deployment: Selected software component 'SAPPCUI_GP'/'sap.com'/'MAIN_ERP05VAL_C'/'1000.600.0.13.0.20080516101947''/'0' will be deployed.
Oct 14, 2008 6:32:07 PM Error: Aborted: software component 'SAPPCUI_GP'/'sap.com'/'MAIN_ERP05VAL_C'/'1000.600.0.13.0.20080516101947''/'0':
Failed deployment of SDAs:
development component 'pcui_gp/isr/cfg'/'sap.com'/'MAIN_ERP05VAL_C'/'2515722'/'0' : aborted
Please, look at error logs above for more information!
I have checked the CONFIGTOOl and the properties seem to be OK.
I tried SHUTTING DOWN all APPLICATION servers & Restarting the DEPLOYMENT,but it still Failed
Pls suggest.
Regards,
Abhijeet
I

Hi George,
Thnx for your reply.
I have stopped all Application servers and kept only the CI-DB instances running.Retried deploying the ESS packages but still getting the same error.
Have checked the Visual admin,it is not in SAFE mode,it working normally.
Have alos checked the CLUSTER Manager Property Values in both Visual Admin & Config Tool,they are alright.
About the Cluster Resources,can you pls specify what exactly do you mean by "Cluster Resources are running or not".
I think if the application servers are stopped,then the Cluster resources shudnt come into play right?? Correct me if I am wrong.
Kindly suggest what other steps I shud take.
Regards,
Abhijeet

Could not start transport control program tp while releasing the TR

Hello experts,
i have a problem if any one phase this kind of problem & if u know the solution please share to me its urgent
problem in Development system ,for this i had updated kernel , TP patch level , R3trans patch level in development and quality system , but still the problem is occurring in development system . while releasing the Transport Request this error is coming that too not in frequently some times it is happening some times it not happening ( some times its working fine )
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An
error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway
Monitor (SMGW).
Procedure
Contact your system administrator or use report RSTPTEST to localize the error. You can then
execute the command again.
please suggest me what can i do for better , how can i resolve this issue
Thanks & Regards,
Narasimha

Hello experts ,
Last one and half month on-words we are phasing some problems on STMS
while releasing the Transport Request getting this error messages on
status-bar
1. "could not start transport control program tp"
2. while importing the TR into quality system getting this error message" RFC Error :timeout during allocate/CPIC-CALL "
3.while forwarding the TR from QAS to PRD : " RFC Error :timeout during
allocate/CPIC-CALL "
after continues refreshing,we are able to release the request and importthe request into quality system. But after some time again same problem
coming
for this we did the kernel upgrade , tp , & R3trans update and STMS RE-
Configuration etc...But no use with this we got the same problem after
finishing all these workaround , but don't know what happened after 2-3
days STMS starts working fine DEV-QAS-PRD ,
Now we are in the same problem after continues refreshing,we are able torelease the request and import the request into quality system. But after
some time again same problem coming
please suggest us what could be the reason behind this & what we can do
for better

Windows could not start the FLEXnet Licensing Service service on Local Computer Error 1068: The dependency service or group failed to start.

Today I installed Adobe Director 11.5. I received a couple of errors in the FLEXnet Licensing Service. It looks It could not start. I tried to download the Licence fix what I found on Google but that doesn't work, so I checked the 'Service' at service (windows).
It's status is empty. When I double click on the FLEXnet Licensing Service, clicked on start at the opened window and an error is coming:
Windows could not start the FLEXnet Licensing Service service on Local Computer
Error 1068: The dependency service or group failed to start.
I don't understand what it says with this message, only that it is impossible to start. However, that is not what I am trying of course, I want to start the FLEXnet Licensing Service, service.
Re-installing of the software, doesn't make any change. How can I start it so Director is also working?

Hi Don1233,
Please consider seek help at the software vendor side.
For the services didn't start, follow the suggestions posted by Elton in the thread below:
https://social.technet.microsoft.com/Forums/en-US/e35da253-f0df-41d1-8df2-b73fa54742a0/windows-could-not-start-the-flexnet-licensing-service-service-on-local-computer-error-1068-the?forum=w7itproinstall
Best regards
Michael Shao
TechNet Community Support

The Sun Java Application Server 8.1 could not start anymore

Very incredible I was working fine from may days with Stydio Creator 2
but yesterday I run the project and it does not work anymore, please can you suggest something:
The Sun Java Application Server 8.1 could not start.
from the Output console:
C:\Sun\Creator2\SunAppServer8\bin\asadmin.bat start-domain --domaindir C:\Sun\Creator2\SunAppServer8\domains\ creator
Failed to start server localhost:4848
Deployment error: Failed to start server localhost:4848. See the server log file for details.
Exception=Deployment error: Failed to start server localhost:4848. See the server log file for details.
Deployment error: Failed to start server localhost:4848. See the server log file for details.
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:198)
at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:75)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:234)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:242)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:125)
Caused by: Failed to start server localhost:4848
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:152)
... 10 more
and in the log file:
[#|2006-02-24T11:49:51.296+0100|WARNING|sun-appserver-pe8.1_02|
javax.enterprise.system.core|_ThreadID=25;|CORE5061: Exception :
com.sun.appserv.server.ServerLifecycleException: [C4073]: A JMS destination limit was reached.
Too many Subscribers/Receivers for Queue :
temporary_destination://queue/192.168.0.159/3376/2 user=admin, broker=127.0.0.1:27676(2403)
     at com.sun.enterprise.jms.JmsProviderLifecycle.onTermination(JmsProviderLifecycle.java:476)
     at com.sun.enterprise.server.ApplicationServer.onTermination(ApplicationServer.java:454)
     at com.sun.enterprise.server.Shutdown.startShutdown(Shutdown.java:42)
     at com.sun.enterprise.admin.event.AdminEventMulticaster.invokeShutdownEventListener(AdminEventMulticaster.java:1445)
     at com.sun.enterprise.admin.event.AdminEventMulticaster.handleShutdownEvent(AdminEventMulticaster.java:1434)
     at com.sun.enterprise.admin.event.AdminEventMulticaster.processEvent(AdminEventMulticaster.java:443)
     at com.sun.enterprise.admin.event.AdminEventMulticaster.multicastEvent(AdminEventMulticaster.java:139)
     at com.sun.enterprise.admin.server.core.channel.AdminChannelServer.sendNotification(AdminChannelServer.java:90)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
     at sun.rmi.transport.Transport$1.run(Transport.java:153)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
     at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:460)
     at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:701)
     at java.lang.Thread.run(Thread.java:595)
thanks

I just had the same problem this morning. I believe the app server starts and if you browser directly to your app you'd get it, but the connection between the appserver and the IDE is somehow lost. An easier solution than completely reinstalling for me was to delete the .Creator folder in my home directory (C;|Documents and Setting\<username>\.Creator) and restart Creator

Camera could not start in LG handset but same code run well on nokia 6600

Similar Messages

Maybe you are looking for