Camera Data missing

I'm having a problem with the embedded camera data that is stored with a photograph. I'm not sure but every once in a while PS deletes the data from a photograph when I edit the photograph. This is not happening every time. Some photographs I edit all the data is still there after I edit. Others I edit have been changed. All the camera data is missing and the original creation date, the date the photograph was taken is changed to the date I edited the photograph. The creation date and time is important to me to keep photographs from different cameras in the correct sequence of real time. Is this normal for PS or am I causing it?
Mike Terrien

Curt;
Took a number of my photographs and made editing changes to them that I frequently do. No data lost, no date changes. I don't know what happened to the other images that changed so I guess I'll have to continue on. I'll keep a closer eye on images I change and see if it happens again. Until then I would say this discussion can be closed. Thanks for your help.
Mike

Similar Messages

Camera data subject distance missing in CS6

This is another strange problem. I noticed that recent shots with any of 3 Nikon cameras, D3, D4 and D300s lack the distance data in CS6 Bridge. But older shots do. I narrowed the change to about June 10, 2012. Before this they have the subject distance and June 12 pictures and later don't. It seems that this is the time when I configured or installed CS6 which was a free upgrade after getting CS5.1
When I open CS5.1 Bridge though, even the most recent shots have subject distance.

Curt Y,
Thanks for your response. I was aware of the thread you reference. In fact I have implemented the excellent workaround described by Paul Riggott in that thread.
Nevertheless that thread fails to provide an answer to the original question: Why is subject distance correctly displayed in Bridge 5 and that field completely absent in Bridge 6.
In my case this is true for both native NEF files and when the same file is converted to DNG.
It is true for both old and recent files and for files from D700 and D800 cameras.
In the case of these two cameras, the Subject Distance is found under the Makers Notes but is not found under the Exif data as reported by ExifToolGUI. This last finding confirms the observation of DLC (reply #4) in the cited thread.
However if one examines the advanced tab in file info, one finds the following:
In both Bridge 5 and Bridge 6 there is an entry under Exif Properties labeled "Subject Distance"
So the question remains: why is this datum displayed in the Camera Data (Exif) Panel of Bridge 5 but not in Bridge 6? And what can be done to correct this glitch?
Addendum / Correction
I have just discovered the following: Older (raw) files which had been previously opened with Bridge 5, regardless if they were edited or not, when now opened in Bridge 6 do show the Subject Distance in the Exif Panel.

Extracted C4D Camera data from Cineware does not align.

My fault for not trying a simple scene in C4D and making sure this would work.
But alas, I spent the better part of the day animating a Camera (using the CSTools DocuCam setup) in Cinema. It's excatly how I want it. The camera rig is parented to a null which is simply changing its position around the scene. I'm also keyframing a target null that the DocuCam is following. The DocuCam has several xpressions that cause it to "wiggle" and quickly zoom in and out to give a handheld feel.
First attempt, I brought in the C4d (r14) file into AECC and hit Extract Camera data. Solo'd out just the DocuCam (the currently selected camera in the C4D source file), and added a Solid to the Comp. Scrubbed through the timeline to see if it moved away from the Camera as expected, and it is totally misaligned. The camera doesn't rotate or perform any of the same movement as it did in C4d.
I also tried baking all the keyframes for each of the elements in the c4d file, and re-import. Not any better. All the frames for the camera do import (without the nulls, etc), but again, it looks like I'd have to muck around with some nulls in AE to (maybe) get everything to align.
Hoping I'm missing some obvious solution to the problem, or my expectations are out of whack.
It will be annoying to have to CameraTrack my 3D rendered scene, when I have all that data in C4D.
Other attempts included:
Trying to use an .aec file and that only imported 1 keyframe for the camera, despite the baking method.
Repeat same procedure, this time with External Compositing Tags attached to the camera and assoc layers. Even attached it to a dummy object (Cube) in front of the camera and tag'd it.
Crazy project, super deadline, thought this would be the right workflow. Any help would be appreciated!
Steve

Hi Rick – I appreciate the advice.
To answer your question, I have the latest version of CC, just released a couple of days ago, and I'm running C4D r14.041 (not Lite).
Just to make sure we are on the same page. I don't want to use the AE camera to affect the Cineware layer. I want to extract the camera from the C4d file, so I have a 3D camera in AE, and can then composite other elements over (or "into") my 3D scene so those layers align visually to whatever we are seeing in the C4D scene.
In fact, I didn't even plan to use the Cineware layer once I got the C4D data, rather planning to render out of C4D an image seq and import back into AE.
Basically, I have a 3D scene of a town, some buildings... then I want to composite some explosions, etc... but don't want to do that in C4D on planes, but would rather do that as separate layers in AE, so I can control effects on those individually, and then color-grade everything together (with the rendered scene below).

Error " Data missing for the entry check while creating a new waste code

Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
I have checked everything several times watching for typos or looking for a missing step.
I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
Phrase set to Z_EHS_WA_WASTE_CATALOG.
enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
After matching up the master data It should work fine but I might be missing something to get it running ok.
¿Any idea?
Regards,
Alvaro

Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
2. Create a copy of the 5 characteristics included in this class.
SAP_EHS_1024_001_WASTE_CATALOG
SAP_EHS_1024_001_WASTE_CODE
SAP_EHS_1024_001_WA_SUBCATEG
SAP_EHS_1024_001_WA_CATEGORY
SAP_EHS_1024_001_REMARK
change the name by
Z_EHS_WA_WASTE_CATALOG
Z_EHS_WA_WASTE_CODE
Z_EHS_WA_SUBCATEG
Z_EHS_WA_CATEGORY
Z_EHS_WA_REMARK.
I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
3. Create phrase sets for each new category. with same name.
4. Match up the master data.
5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
I think I have followed all the steps, but for some reason it doesn't find the catalog
The phrase for the catalog is EWC in english and LER in spanish.
Regards
Alvaro.

Error in Billing doc posing to FI - Export data missing

Hi Experts ,
While releasing SD Bills to Accounting Some export documents are not posted to FI and posting status is given 'G' (Posting document not created export data missing ).
Please give me solution which data may missing to post export billing documents to FI.
Amol

Hi amol
Go to VF02 and first go to item data -> foreign trade data tab and click on the incompletion log , you will get the list what all to be filled . Once you complete. then go to header data -> foreign trade data tab and click on the incompletion log ,you will get the list of data which has to be filled and you can fill it and save it .
Then once the billing document is saved it will be passed on to FI
Regards
Srinath

Camera roll missing from iphone 4S after update to iOS 8

camera roll missing from iphone 4S after update to iOS 8

Hi,
It's normal, it's replaced with another folder.
and now you can recuperate your deleted pictures from a folder or after 30 days they will be deleted.

Schedule line item data missing in Purchase order form in ECC6.0

Hi All,
We are doing ECC6.0 upgradation project . I am trying to print Purchase order in ECC6.0 , all data is coming fine in PO except schedule line item data is missing.
Same print program and form works fine in 4.7E but schedule line item data missing in ECC6.0.
Print program is a copy of standard SAP program SAPFM06P and layoutset is a copy of MEDRUCK.
If anyone knows if there is any OSS note for the standard print program or any solution please let me know.
Thanks,
Sonali.

Resolved on own.

Posting Document not created (export data missing)

We are working on ECC 6.0 and during creation of Cancellation Billing document type IVS for the Intercompany billing, the document did not create Accounting document giving the Posting status as G - Posting document not created (export data missing). However checked the Foreign trade data and the system states that Foreign trade is complete.
Can any one suggest the solution for this?
Thanks.

Hello Mohammad,
About this issue, the incompletion of this cancellation document
arises might because the reference delivery has been archived/deleted.
This is likely due to your current copy control settings (VTFL).
If you have set ' ', in the export determination field this means that
there is a common 'exnum' key between the delivery and billing documents
LIKP-EXNUM & VBRK-EXNUM are the same.
The result of deleting the delivery is that you also delete the FT data
for the delivery, Because the billing document and delivery share the
same foreign trade table entries, you have in effect deleted the FT data
of the billing document too. This would most likely go unnoticed but if
you then cancel the invoice the system has no FT to copy into the new
cancellation billing document, which leads to this issue.
Firstly you should set the export determination flag in the copy control
of the delivery & billing documents. This will avoid this issue in the
future. Set it to to 'A' or 'B' depending on your requirements.
For the incomplete cancellation billing document, you could use userexit to
set it as complete:
You can use transaction CMOD.
Create a project for example FT project button create short text: ....
drop button Enhancement assignment & save use for example local object.
Use the F4-help for Enhancement and look for V50EPROP.
Drop button Components:
here you will find EXIT_SAPLV50E_005 and EXIT_SAPLV50E_006
In the userexits doubleclick on the includes ZXV50U05 and ZXV50U06
The coding in the userexits should be: C_COMPLETE = 'X'.
Afterwards activate generate ... and save.
The development class is VEI.
Please also check note 118573 which explains the FT user exits.
Regards,
Alex

Smartview - HypExecuteQuery with suppress rows 'No Data/Missing'

Hello,
I'm executing a MDX query by executing the command 'HypExecuteQuery' and I set the options suppress rows 'No Data/Missing'.
But everytime, the query is working successully but without suppressing missing data.
Does someone know it the suppress missing rows is compatible with the hypExecuteQuery or 'Execute MDX' ?
SmartView 11.1.2.5.210
Office 2010
Thanks in advance for your answer
Best Regards
Benjamin

Hello,
The solution is as follows :
SELECT
NON EMPTY {[MEMBER_NAME]} ON ROWS,
NON EMPTY{[MEMBER_NAME]} ON COLUMNS
FROM <APP>.<DB>

Since mountain lion Find in Numbers 3-4 columns of data missing and some columns in the wrong order. Fortunately I have a back up on my iPad and was able to put that version in as a new file. Why has this happened ?

Since mountain lion I have noticed 3-4 columns of data missing from a Numbers file. I have fortunately been able to replace the total file from my iPad version but why has this happened. Makes me lose trust in Numbers

That would be strange.

Camera to video camera switch missing on iphone 5/ios6

i have had my iphone 5 since yesterday, and noticed today, that the switch to change from camera to video camera is missing?? I have force quit / closed the application and re-opened the camera... but still the switch is missing?
Sanjay

right. figured it out... weird one... so I have just been on a 3 hour conference call... and as soon as i got off the call.. and then went to camera... the switch appeared?... to test, it - i then called a friend... and went to camera... no switch. it seems that whilst on a call... you cant record video... only take photos through the camera app
sanjay

Images stripped from Camera Data after Export from Lr

Hi,
I've just opened images in jpg format in Ps. The images were exported from Lr and for some reason all the Camera Data is gone...
I went through all the settings in Ps and Lr and didn't find anything...
I'm enclosing a screenshot.

Hi, this is a similar to an earlier post and here is my reply:
In the Export Dialog Box, under Metadata, make sure that you checked the box for "Write Keywords as Lightroom Hierarchy", in this way all your keywords will be carried over to Photoshop. Conversely, if you do not want your keywords or other metadata to show in Photoshop, then check the box for "Minimize Embedded Metadata". I hope this helps.
Arnel
www.arnelgarcia.com

Some of the camera photos missing geotagging

I,m using iPhone 4 with iOS5.... the gps location is ON for the camera, but some of the photos taken withthe camera are missing the geotagging. Cant find a pattern or a reason for it.few photos has the geo tagging and suddenly few images are without geotagging.eg. I had taken three consecutive photos from the camera out of which only oneshows the geo tagging and the other two are not.

Now, however, when I submitted my question to iTunes as to how I could redeem the rest of my card, I was told they could not respond to specific questions.
Doublechecking, lenore. You've worked through the contact procedure from the following document?
iTunes Store: Invalid, inactive, or illegible codes

Database exceptions data missing in SMD 7.1

Hello all,
I have configured SMD on SolMan 7.1 SP03. I successfully connected 2 systems (ABAP single and JAVA single) to technical monitoring. Also SolMan self-monitoring was configured successfully. I can see some monitoring data in solman_workcenter, but I don't see any data in section Database Exceptions and Database performance like e.g. tablespace usage, last successful backup, reads per usercall etc... I can see current data in Database availability section - archiver status, instance status etc... There are obviously some data missing in BI as I get an info message : "No data has been transferred to BI system up to now for metric .....". Unfortunately I can't find out where is the problem so far. I can see SMD agents are connected and pushing other data (ABAP and host related) to SMD w/o any problems. Any hint is appreciated.
Thanks.

Hi,
Check this: http://help.sap.com/saphelp_sm71_sp01/helpdata/en/f7/51b87f807344eba0ddca2d2174cbee/frameset.htm
"A remote database connection between the DBA Cockpit and the remote database is configured and available, to gather the data for tablespaces, availability, backup status, etc. remotely. The prerequisites for database administration and monitoring are described in SAP note 1027146."
Cheers,
Diego.

Error: Export data missing

while Invoice-Release to accounting I got error as "Export data missing"
when I check I found that Foreign trade data is incomplete as per system. Also I have seen foreign trade no also in invoice foreign trade/customes view.
I dont know why this error is coming. system is asking to complete foreign trade for which no customizations available.
So I want to know what triggers to generate foreign trade no means why it has become essentials to provide these data?
which master data are important to trigger foreign trade? I have not maintained anything in foreign tarde view in material master.
Also let me know how can I resolve this problem?
Vijay

Hi Vijay,
The note 173411 described that there are hard-coded checks for the
listed in the note. If you choose for business reasons not to use the
incompletion procedure, then it can be de-activated. For this, kindly
refer to note 118573.
Please complete the following steps:
- create a new customer project via CMOD.
- assign the enhancement V50EPROP (which contains the userexits) to
the customer project.
- place source code inside the include found in exit_saplv50e_005
& _006, for example,
INCLUDE ZXV50U06
       if ( i_exp_imp_flag eq 'E' ).
         clear: c_complete.
         c_complete = 'X'.
       endif.
- generate the two new objects (exit_saplv50e_005 & _006) via
SE37.
- activate the project via CMOD.
========================================================================
If foreign trade functionalities are to be used, the corresponding
customizations must be maintained using transaction VI29 and VI49.
note 354222    Foreign trade data incomplete for domestic business
may also be helpful.
Thanks,
Alex

Camera Data missing

Similar Messages

Maybe you are looking for