Camera Default not working
I have Aperture 3 and set up a Camera Default in the Raw settings. The problem is that Aperture picks the Apple settings everytime I import and NOT my Camera Default settings. What can I do to fix this?
Kevin
Has this been fixed yet? Every time I import images, the Apple setting is applied and not the Camera Default that I have set up! I also, can not lift and stamp the fix onto the other images. I have to do them one at the time.
I have the latest updates from Apple. HELP!
Kevin
Similar Messages
-
Lumia 920 Camera App not working with 8.1
Hi there, Just had the Cyan update. Camera app just shows black screen, both for video and camera.
Did soft reboot, hard reset, etc. Took to repair shop and they installed new camera. Not working
They did a reinstall back to factory and still no joy.
Nokia Lumia 920
Carrier At&T
Windows 8.1
OS 8.10.12393.890
Please help?!RobRoy_cro wrote:
Hi..i have same problem then i make nokia pro cam as default and turn off "more tile" in settings and now everything works
I hope this help
Thanks. Only had microsoft camera, so downloaded the Nokia Camera. Could not find a "nokia pro cam"
Also where in settings is the "more tile" option?
Nokia camera now is just the black screen, no options. -
Re: camera dose not work
I have the same problem with my mobile Nokia E75 and I've tried both ways and it did not work
my camira still not working and i don't know what to do ???
please help .@naroh
Can only suggest that you backup all essential data, return device to "out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user). Failing that try re-installing existing software with Nokia Suite and at this point you have eliminated software corruption as a possible cause and visit to Nokia Care Point would be needed for possible hardware related issue.
Happy to have helped forum with a Support Ratio = 42.5 -
Iphone 4 camera flash not working.
Iphone 4 camera flash not working when taking pictures but works with the flashlight app. I have ios 7. Tried factory reset. My wife has the same problem with her iphone 4 since the first month she has had it. Any suggestions?
and what have you done to try and fix the situation? Have you taken the steps recommended in the User Guide?
-
I fell down the stairs the other day and busted my other ipod to the gamewerks near my house. the guy said he couldnt fix that ipod so he gave me a new one.. a better one a 32GB, the broken one was 8GB. but he told me the only bad thing is that the camera does not work and he doesnt know why... he just couldnt get it to workkk... any ideas on whats wrong?
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order -
My camera does not work on my macbook, any suggestions to fix it?
my camera does not work on my macbook, any suggestions to fix it?
Here are Applle's troubleshooting steps....
support.apple.com/kb/HT2090 -
I just bought an Iphone 4 from straight talk. My camera does not work. The shutter does not open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile. I want the issue fixed.
ThanksTake the iPhone to an Apple store genius bar for testing, and if it is defective and under warranty they will replace. Since you say iPhone 4, was this a used or refurbished iPhone?
-
I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, I honestly think this is out raging because i spend over $200 on this. To have for music and instagram. I use it about an hour a day, but i've only been using it for about 3 months although i've had it since December. Any suggestions that may help me?
Try:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
If still problem make an appointment at the Genius Bar of an Apple store. -
Help, web cam is not working properly with win vista
Hii.. my web cam is not working properly with win vista..even if the icon appears bt it does nt start.. its
lenovo easy capture 2.5...so if u cud suggest me anything...
Moderator note; subject editedre-install drivers and try again. ( also easy capture )
-
My integrated web cam is not working
I Am using hp pavilion p001tx laptop. My web cam is not working
It shows a warning
No web cam detected. Try to plugging in a webcam into your computer now. If you are using an integrated camera, Make sure that it is turned on.
Help me please.
My laptop serial number is [Personal Information Removed]Check if the drivers are installed or not.
Try to update the camera drivers and restart the system.
You can also go to device manager setting and see if the webcam is disabled or not.
If everything fails try system resore or run OS recovery. -
HP Compaq web cam is not working
I have Hp Compaq Notebook 620. The devices have 2MP Web Cam but the Web Cam is not working. When i try to make it on, its shows error
"No webcam detected. HP Webcam will now Close"
Please suggest the solution of the problem.Hello Manishshakya,
I see that you are having problems with the webcam on your computer. The unit you have is a HP commercial unit.
I would suggest posting your problem in the HP Commercial Forum as well. There are more users with the computer you have on this board and it is specific to your computer.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
My HP-Pavilion dv6 web cam is not working properly, fluctuating always
My HP-Pavilion dv6 web cam is not working properly, it is fluctuating always
re-install drivers and try again. ( also easy capture )
-
Web-Cam does not work on Lenovo G480, PLEAS HELP!!
Hello,
I have a Lenovo G480 (20165), and my built-in Web-Cam is not working.
When I enable it by pressing Fn+Esc the little light by the Web-Cam turns on, then shuts off after a second.
So I downloaded the Lenovo Easy Capture, and when I open the software, I get a message saying "Failed To Open Camera".
And when I turn on my laptop, the little light comes on for a short moment, then the light shuts off.
I don't know what to do, It's a brand-new laptop and I've never been able to get the Web-Cam to work, not even on Skype.
I would REALLY appreciate the help. Thank you!Have you installed camera drivers from the us support site? Try reinstalling them
Win 7
http://download.lenovo.com/consumer/mobiles/0qca12ww.exe
http://download.lenovo.com/consumer/mobiles/0lca12ww.exe
Win 8
http://download.lenovo.com/consumer/mobiles/0qca08w8.exe
http://download.lenovo.com/consumer/mobiles/0lca11w8.exe
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it. -
- My tx is so slow, and heats up very fast... so i think that the advance is not working properly
- the web cam is not working, since the 3th time iused... when i try to use it with my msn... got freezed, then y try ending the process and doesnt work, y have to restart it but it stay just on logging off... and do nothing more... so i have to switch off directly from the power button
- The screen freezes... some thimes the screen got freezed... and got color distortions too... so i have to to switch off again directly from the power button
i was thinking that it was a software problem... but i restore my lap and it doesnt work cuz it still being with the same problems... so lately im thinking that its a hardware problem... i call to technical support from mexico... but they can do nothing for me cuz i bought my lap at circuitcity from el paso... and that store close a few months ago... so i need help before de warrantie expires...
This is the second time that my lap gives me problems, last time I made the change at the store but this time it will be impossible cuz is now closed...
that is why I seek your help...
i will be grateful if you answer in Spanish because my English is not very good...
thankyou so much...If your warranty has not yet run out get it serviced, now! All of the comments seem to indicate that it is the motherboard>
-
I am using Mac book with windows 7. But my sound card and cam is not working when booted through windows. How can I solve this?
ThanksAssuming that you tried to install Win 7 in bootcamp.
Power on the machine and press and hold the "option" key when you hear the bong sound.
Select the Macintosh HD icon and press "return" or just click on the icon.
Once booted into OS X go to System Preferences and select the Startup Disk icon and configure startup to use the Macintosh HD.
Maybe you are looking for
-
The following error is occurring while initiating the workflow in P6 R8.2 of Web Access (My Workflows tab is not working). ERROR com.primavera.infr.srvcs.bpm.BPMNServiceImpl ?:? BPM service could not connect to BPM Identity service provider for datab
-
HD TV Shows do not show up on the Apple TV.
HD TV Shows do not show up on my Apple TV, check for software updates and system is up to date. Is there an update to upgrade the Apple TV to play the HD TV Shows?
-
The Apps on the second page wont open on my Ipad
Why wont any apps on my second page open up?
-
Is Oracle Discover able to run in another Application Servers?
Hello All! I am involved in a consulting project, our customer does not have Oracle 9IAS and even does not care about it. He has bought Oracle 9i release 2 and Oracle internet developer suite. I want you , if it is possible, to go direct to the point
-
Error in uploadXMLFiles. Trying again in 176.00 seconds or earlier.
I am not able to upload my xml files, I dont know what could be the reason. I am having 10202 agent and I have upgraded to 10203. It was talking to GC A, I have changed values to points to B in emd.properties. Now it's not able to upload the data...