Camera Does not open, Camera Does not open

Suddenly My i pad camera has stopped opening. When. i tap ,camera, The screen goes black

Try closing the Camera app via the taskbar and see if it works properly when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

HT201401 Camera lens on iPhone 4 does not open and nothing is visible, although the camera functions normally via MMS only.

The virtual camera lens on my iPhone 4 stays closed when accessing the camera via the camera application. If I use the camera via the MMS messaging feature the camera will operate properly and save any picture to the camera roll.
So, there does not seem to be a hardware problem. The camera works fine except when I use the camera application itself.
I've reset the phone and performed a restore via iTunes, the camera will usually operate normally for a short period and then revert to a state where the camera lens will not open unless accessed by a third party app or via the MMS application.
I deleted any third party applications from the phone just in case there was a conflict, this did not help, the lens remains closed unless accessed by the messaging application or any other third party application.
Any suggestions would be very much appreciated as this is a very frustrating problem.

Since Reset is not helping, Restore iPhone with iTunes on computer. If this does not fix problem, consider replacing camera or entire iPhone.

I am trying to open some *.avi files in quicktime, they are from my security camera at home. It will not open them, would anyone be able to help me? It says I need a plugin but it does not tell me which one.

I am trying to open some *.avi files in quicktime, they are from my security camera at home. It will not open them, would anyone be able to help me? It says I need a plugin but it does not tell me which one.

I am trying to open some *.avi files in quicktime, they are from my security camera at home. It will not open them, would anyone be able to help me? It says I need a plugin but it does not tell me which one.
Basically your player is telling you that you need to install the codecs that will play the compressed data within the AVI file.
AVI is a legacy file container in which the tracks of data are interleaved to maintain synchronization. This data can be encoded using many different audio and video codecs. Your problem is to determine which codecs you need for the player you are trying to use and install them if they are available. Failing that, your will either have to play the files in a different player which has the codec support your require built into the app or convert the content to a compression format that is natively compatible with the player you wish to use.
Since you have not stated what platform, operating system, and particular player you are targeting for playback, it is difficult to provide precise instructions for fixing your specific problem at this point. Suggest you try alternative players compatible with your system and platform to see if they will play the files, use a dedicated media information utility to determine the codecs needed for playback, or post a sample file for analysis.

LR 5 Cannon open CR foto's in CS5. Plug in Camera RAW is installed but does not. appeal in LR and PS.

CR foto's in LR 5 will not open in Ps 5. Plug in Camera RAW 8.4 is installed but does not show in LR and PS.

Canon 6D
Verstuurd vanaf mijn iPad
Op 3 mei 2014 om 23:40 heeft Keith_Reeder <[email protected]> het volgende geschreven:
LR 5 Cannon open CR foto's in CS5. Plug in Camera RAW is installed but does not. appeal in LR and PS.
created by Keith_Reeder in Photoshop Lightroom - View the full discussion
Which Canon camera?
The Adobe Camera Raw (ACR) plugin has no relevance to Lightroom, incidentally - doesn't matter how up to date ACR is, Lightroom doesn't use it.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6351284#6351284
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I have cs5 and bought new camera olympus e-m1 photoshop does not open raw files is there a patch for it?

I have cs5 and bought new camera olympus e-m1 photoshop does not open raw files is there a patch for it?

Familiarize yourself with these tables
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Camera Raw-compatible Adobe applications
The E-M1 was first supported by Camera Raw 8.3 which is only compatible with CS6 and CC. It is not compatible with CS5 or lower and never will be.
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all the Raw E-M1 files to DNGs then edit the DNGs in CS5
Camera raw, DNG | Adobe Photoshop CC

IPod 4g: the accumulator does not load, camera doesn' t open, reset done but still defect, what can I do?

I can't load the accumulator, the camera does not open the lens. The cable is not defekt. iPod does not recognise when electric- cable is pluged.

I think load the accumulator means charge the iPod.
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Also:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Bridge does not open camera raw files

I am having this issue with the bridge not opening cr2 files in acr. I have a new mac and installed CS6 with 7,4 acr. Has anyone come up with a solution to this bug?
The error message is :
camera raw editing is not enabled camera raw editing requires that a qualifying product has been launched once to enable this feature
I really would prefer to not uninstall this product and it is not the case that I have another trial copy. I have searched my computer and cannot find any.
Thanks for any new ideas on this bug.

I noticed that there are still adobe folders for photoshop and premiere on the computer. Should I just delete those folders?
Use Easy Find (Devon) and run Adobe in search field. From the list select the folders that you have doubt about and choose Show in finder option. Then look at the content. If it are custom settings like actions, tools, brushes best keep them save.
But to be totally on the save side select all search result and copy them to a separate disk as Back Up so you can always find some lost customized settings back. All other deleted files should be reinstalled as per new install on new disk.
I would like to get it right this time. I was also wondering if I can still download the dmg directly from adobe or is that not available anymore.
If you have bought a download version of the Master Collection for CS6 then their should be a possibility to download it again using your Adobe ID. The new CC can be downloaded again using ACC.
Otherwise you have to contact Adobe customer support for a new copy or download.

The front camera on my iPod 5 is not opening

The front camera on my iPod 5 is not working and I have had this problem for a LONG time. When I try to open my front camera, it freezes and does not work. this also happens when I try to use the front camera on apps like Instagram and snap chat. I had this problem before ios7. I've tried a lot of things I tried restarting my iPod, but that didn't work. I've also tried to back-up and restore my iPod on the computer and on the device, but that didn't work. I waited for ios7 to come out because I thought that maybe the camera would start working again if I updated, but I was still having the same problem after the update. it's getting really frustrating because I try to video chat my friends but they can't see me cause the camera won't work! what do I do? I don't think it's a hardware problem because I googled this before and a LOT of people seem to have the exact same problem
here are some additional details that might help:
-this problem started since the 2nd day I had my iPod
-the back camera works just fine
-I did everything except restoring it to factory settings
-I haven't taken it to the Apple store
what do I do? should I restore it to factory settings? will all my music and pictures get deleted if I restore it to factory settings?

Since you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

CQ62-215DX hybernates upon closing notebook and does not come back on after opening screen again

My CQ62-125DX Product WQ5856UA#ABA shut down when book was closed in the on position. The screen remains black athough Cap lock light s intermitent. I shut down to reboot, and system sounds and acts as if t was coing o, but screen never lights up.
This happened only after the laptop screen was closed and reopened. after giving up I decided to press the power button three week later, and it came on, but thinking all was Ok after a couple of days, again I closed the laptop and screen will not come back on upon opening. It seems to gointo hybernate mode, but will not wake up again. If it happens to come on again I will go in and shut off the energy saving featues, so it does not go into hybernatiion, but mean while...... What fix do you have for this issue. I'm not doing anythingut of the ordinary, I look online, and see that many people experience these symptoms. Have you looked into this and figured how to solve this glitch?? Thanks in advance for you help ALbert

Same thing here!! I was calling my wife and it happened 3 times in a row in a matter of minutes. I rebooted the phone and it went away. Hasn't crept up on me again, yet (knock on wood).
I don't know whether it makes a difference and whether they are technically the same, but I upgraded the firmware that was released 07/10/2008 that is from Apple's Servers from version 5A345 to 5A347 just to see if this fixed any last minute glitches.
I hope this problem never surfaces again. We all paid a lot for these and spent a lot of time waiting for activation.

Open button does not open image in photoshop?

Am I doing something wrong?
If I edit a CR2 file in Camera Raw 5.1, and the select the open button it does not open the image in Photoshop CS4. Is it not suppose too?
Any help would be appreciated,
Thanks in advance
CoolPix

I saved the old version, just in case I had problems. So I removed the original version, and replaced it with v5.1
I did not try to open the file with Photoshop.
1. Opened bridge and viewed photos
2. Right click in bridge, and selected open with ACR
3. When Camera Raw opened, I edited photo and selected "open"
4. Photoshop opens, but with NO edited photo.
Now I have made a association in the download folder to open with Photoshop, which opens ACR first, then after editing it now works when I select open it opens in Photoshop.
If you read my last post, my quetion is "why does it not open from my method I used originally in Bridge?
I hope this is clear enough.
Coolpix

I have a macbookpro. when I connect any camera to the mac it does not show as a device. How do I load my pictures to either iPhoto or Aperture? It worked before but just stopped working. Any suggestions?

I have a macbookpro. I use Aperture and Iphoto. When I connect any camera to the Mac it does not open it as a device in Iphoto, Aperture or in Finder. It use to work but just stopped. Any sugestions?

Here is the full story. It may be long so please bear with me. I take a lot of pictures and movies. Since I have over 30,000 pictures I decided to place the Iphoto library on an external drive to save space on my internal drive since ot was getting very full. After I did that it worked fine for a while. Then one day I could not open the Iphoto library. Since I was overseas at the time I brought it to the IStudio ( not an Istore) overseas. They said to rebuild the library and they would do that for me. It took all day since I had so many pictures. When they called me and told me it was ready, I went to pick it up. They started to show me the new library. It crashed again. Not knowing how to fix this at the ISudio, they installed Aperture and imported the Iphoto library. This worked fine for a short time.When back in the states, it crashed again just like Iphoto. I took it to the IStore. They did not know why the overseas Istudio did what they did what they did and rebuilt my aperture library. Again it worked fine. Now that I am overseas again. It crashed again. However, I concluded that the reason for these crashes is becuase I have the file on an external drive that derives its power from the Mac and not by itself. When I use it and stop for a while the MAC will go to sleep and this cuases the external drive to shut down. This then causes the library to have inconsistancies. Therefore, when it happened this time I tried to repair the library and after 36 hours it would close down Aperture. Therefore I decided to rebuild the library. That did not work either. So I tried opening the Aperture library with Iphoto. That seemed like it was going to work but after importing half of the 30,000 plus pictures. I photo shut down. I then made a new aperture libary and erged the old library with it. This worked. I now have an aperture library that works. However, when I plug my camera into the MAC nothing happens. The camera does not show up in devices in either Aperture, I photo nor in Finder. The USB port and cord I use works fine becuase I can read my external hard drives fine. I checked as SIG suggested in this thread and everything is set to open aperture when the camera is connected.
I have the newest OS version 10. 7. 2 and the computer frequently updates all my programs. I have not installed any ne software lately. The problem happens both if I am on battery or plugged in. Just before I came overseas the IStore replaced the Battery. I can go back to the IStudio here overseas but the last time I was there and told them about the problem ( I did not have my computer with me) they did not impress me with their wisdom. I will be back in that city in a month and can go there if need be. Thanks for all the help so far. God bless.

Camera shutter stays closed. Does anyone know how to make it open or reset it?

When opening camera app, the shutter stays closed on the display and I can not take picture. Does anyone know how to reset it to make it work?

Close Camera apps
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the Camera app upwards to close
3. The app will fly off the screen
4. Test Camera again

My ipad 2 camera shutter doesnt open nor does the camera any one else having same issue

My Ipad 2 camera shutter doesnt open nor does the camera .....anyone else have these issues

Have you tried closing the Camera app completely and seeing if it works when you re-open it ? From the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
What we found from out testing:
- The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
- The file can be closed and Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
- Also, until the Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file.
Example Scenario:
- User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
- Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
- User 1 saves his file and closes it - but Dreamweaver is still open.
- User 2 also saves his file and leaves Dreamweaver open.
- The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
- If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
- Same for User 2, he will open 'his' version with 2300 lines in.
Other information:
- Files are opened directly from the server
- Sometimes the users will save incrementally and re-open
- Most of the time users will save incrementally and keep the files open
- The users will never not save incrementally and just save when closing the file once finished
- The users are usually working on the files all day
- It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
Anyone know if this is a known issue?
Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
Thanks

Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
Mylenium

Can not open Camera Raw in Bridge CS4, or see thumbnails

MacBook Pro
OS 10.5.5
Photo Shop CS4 version 11
Camera Raw 5.2.0.65
I had another version of Camera Raw from PS3. When I bought the Canon EOS 5D Mark II, I deleted the old camera raw plug in, so as to not conflict with the new camera raw plug in.
When I open PS4, click Photoshop, click about plug in, ONLY one version of Camera Raw comes up.
In OS 10, when I click GO at the top, then applications, then Adobe Photoshop CS4, then Plug Ins, then File Formats, I get two Camera Raw icons: a blue lego like icon that says "Camera Raw.plugin" and another icon that looks like the Macintosh HD icon, but is labeled "CameraProfiles.dmg"
The problem is that I can't open files in Camera Raw when in Bridge CS4, nor can I see the little photo thumbnails either.
Can someone please help?
Desperate in NYC.

The Photoshop folder is NOT the correct location for the Camera Raw plug-in, since several versions of Photoshop.
The correct location, is, as described in the readme and in the FAQ of this very forum [hint]:
Mac: [root of your hard disk, NOT your user folder's library]/Library/Application Support/Adobe/Plug-ins/CS4/File Formats/

Script that worked in CS does not work in CS4 - multiple open page, print , pdf export and close

I had a script that worked great for me in Indesign CS. But now does not work in CS4. Anyone knows what needs to be done to make it work again ?
When I drop folder with indesign files on top of this script:
1. opens first page
2. turns specific layer on
3. prints using preset
4. exports using preset
5. close without saving
6. next page
Anyone who can give me solution or idea how this should work is greatly appreciated.
on open sourceFolders
repeat with sourceFolder in sourceFolders
tell application "Finder"
try
-- If you would like to include subfolders, you say - every file of entire contents of folder…
set idFiles to (every file of folder sourceFolder whose file type is "IDd5") as alias list
on error -- work around bug if there is only one file
set idFiles to (every file of folder sourceFolder whose file type is "IDd5") as alias as list
end try
end tell
if idFiles is not {} then
tell application "Adobe InDesign CS4"
set user interaction level to never interact
repeat with i from 1 to count of idFiles
open item i of idFiles
tell document 1
try
set visible of layer "ImagesTag_Layer" to true
end try
set myPreset to "letter size" -- name of print style to use
with timeout of 700 seconds
print using myPreset without print dialog
end timeout
set myPreset1 to "pdf preset name" -- name of pdf export style to use
set myName to the name -- name includes .indd should remove at some point
with timeout of 700 seconds
export format PDF type to "users:temp:Desktop:pdf:" & myName & ".pdf" using myPreset1 without showing options -- set path here format ComputerName:Folder1:Folder2:......:FileName.pdf
end timeout
close without saving
end tell
end repeat
set user interaction level to interact with all
end tell
end if
return 10 -- try again in 10 seconds
end repeat
end open

(Disclaimer: me not an AS guy!)
First thing I noticed is the interaction level is set off. If you comment out this line
set user interaction level to never interact
you might be able to pinpoint the exact error -- ID will display a standard "failed" dialog, hopefully showing the line that it fails on.
A quick question: the script assumes two presets in your InDesign: one for print ("letter size") and one for PDFs ("pdf preset name"):
set myPreset to "letter size" -- name of print style to use
set myPreset1 to "pdf preset name" -- name of pdf export style to use
Do these actually exist in your CS4, with the same (non)capitalization and spaces?

Camera Does not open, Camera Does not open

Similar Messages

Maybe you are looking for