Camera does not write to SD card

Since mid-October my phone no longer saves photos to my SD card.  I am able to save photos directly to my internal memory.  My operating system is Android KitKat 4.4.4.  I have 49 GB of space on my SD card so space is not an issue.  How can I get the camera to save to my SD card again, since that is obviously where most of my free space exists?

You may need to perform a software repair using PC companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Similar Messages

  • Is it possible to have two USB drives for the IPad?  I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive.  One of my cameras does not use an SD card.  How can I do this?

    Is it possible to have two USB drives for the IPad?  I want to bring RAW files from my camera through the IPad and out to an external hard drive.  One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line.  Realted to this, I bought the IPad camera accessory.  Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive?  Can I put Lightroom or the Nikon photo editing software on the IPad?  Right now I carry a PC laptop and external hard drives with me on wildernes trips.  Internet and WiFi are not available.  Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad).  I have Nikon NX software and lightroom on my PC.  I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips.  Is this possible and how would I do it?  I'd appreciate any guidance.

    No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
    For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

  • Add Media in PremiereElements 11 from a Canon Legria HF G10 AVCHD cam does not work

    Hi Everybody,
    I need help as I didn't find anything in the FAQ concerning my problem. I use a canon Legria HF G10 camcorder (AVCHD).
    Importing videos into Premiere Elements 10 is OK
    But after upgrading to the version 11 of Premiere Elements, I do not succeed to get any video from my cam. The camera does not appear in the field SOURCE althoug my MAC OS did recognize it. And of course I get the message that no compatible device was detected.
    Does anybody have experience with such a case or know how to help me ?
    Thanks in advance
    François

    If you Copy the files w/ full folder structure, as Ann indicates, you do not have to have that particular card (or camera's HDD, if it has one), attached to the computer. You have those files on your HDD, so you can use that card for other shots.
    PrE does NOT Copy the media files, when you Import them. Instead, it only creates links to where those files were located, when Imported. If they are still on the card, and it is removed from the computer, PrE cannot find those media files. If they are Imported from the Copies on the HDD, and are not Deleted, Moved, or Renamed, PrE can follow its link to them, as needed.
    Good luck,
    Hunt

  • My camera does not work on my iPad how do I fix this plz help

    My camera does not open like it is frozen please help

    See If a single application is not responding or freezes
    From Here
    http://support.apple.com/kb/TS3281

  • My camera does not work on my ipod touch 4th gen. it just goes to a black screen i have done everything from resetting and rebooting... help :(

    I fell down the stairs the other day and busted my other ipod to the gamewerks near my house. the guy said he couldnt fix that ipod so he gave me a new one.. a better one a 32GB, the broken one was 8GB. but he told me the only bad thing is that the camera does not work and he doesnt know why... he just couldnt get it to workkk... any ideas on whats wrong?

    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

  • My camera does not work on my macbook, any suggestions to fix it?

    my camera does not work on my macbook, any suggestions to fix it?

    Here are Applle's troubleshooting steps....
    support.apple.com/kb/HT2090

  • I just bought an Iphone4 from straight talk and my camera does not work. The shutter wont open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile and now that I have it, it does not work properly. Need help

    I just bought an Iphone 4 from straight talk. My camera does not work. The shutter does not open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile. I want the issue fixed.
                                                                                                                                                     Thanks

    Take the iPhone to an Apple store genius bar for testing, and if it is defective and under warranty they will replace.  Since you say iPhone 4, was this a used or refurbished iPhone? 

  • HT201209 If I redeem an iTunes gift card on an account that does not have a credit card or NONE as payment, can I gift apps to other accounts?  It will not let me. Please advise.

    If I redeem an iTunes Gift Card to an Apple ID that does not have a credit card (or NONE is selected as payment option),  can I gift an app to another account?
    I can purchase apps on that account but it will not allow me to gift an app  from an ipad or via the itunes store (on the computer). Do I need to have a credit card on the account to be able to do that?

    You can only gift via a credit card - you can only use your account's balance for buying content for yourself.

  • I have an eMac which I want to connect to my home wireless network. My router is D-Link-601 tech 802.11n. My emac is wireless ready but does not contain an airport card. Do I need a card and an airport station? What else?

    I have an eMac which I want to connect to my home wireless network. My router is D-Link - 601 tech. 802.11n. My eMac is wireless ready but does not contain an airport card. Do I need a card and an airport station? What else?

    You need the Airport card OR Airport Express but not both.  Considering the age of your machine, I recommend Airport Express as you will find other uses for it whenever you replace the eMac.
    To set up the AE, you do need OSX 10.4 or higher.

  • Acrobat 9 does not recognize the smart card reader that work with other app. Can someone help me?

    Hi to All,
    Acrobat 9 (included in CS4 design premium) does not recognize the smart card reader. I have a smart card reader ACR38 smart card that works with all applications except Acrobat 9 pro. I tried to uninstall and reinstall it again, but when I try to insert the digital signature message is always the same, that does not find the Acrobat reader. Can someone help me?

    Hi MartinR
    Thank you for your reply, i have tried what you suggest, and it did not work, the i DVD opening title changed but not the embedded movie.
    Perhaps it is a setting in Final Cut Express?
    After capturing my footage, i open a new project then i convert all clips to anamorphic, to give me the letterbox effect, i have tried now with and without anamorphic.
    In my canvas screen, the footage does not fill the square, even if i have not selected anamorphic, and fall well within the TV safe areas, but the only way to ill the canvas up is to crop it bigger, but still when i export it does not give me the full screen view.
    Any ideas?

  • Satellite M645-S4050: built in camera does not work correctly

    My built in camera does not work correctly.
    It does not have any kind of effect on and it captures pictures and videos as if some kind of thermal camera was on.
    Also some videos I load up on youtube look like this.
    I have been researching for an answer but can't find it, please help me.

    All you can do is to test it with latest webcam driver.
    Remove preinstalled camera software and install latest version offered on Toshiba download page.
    If the same happen again visit nearest Toshiba service and show them how it looks like. Maybe the cam must be exchanged.
    In the past I have used several Toshiba laptops with built in cam but I have never saw something lke this.

  • Camera does not work correctly after op system update

    UUpdated op system and now camera does not function. Reset pad and made no difference 

    There's more than one type of reset ...
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    No data is lost due to a reset.

  • Hp TrueVision HD web cam does not work. The light will come on but no image appears in the window.

    Hi.
     I have an HP Pavilion dv7 6178us Entertainment PC I just bought it last week. My operating system is Windows 7 Home Premium Service Pack 1 64 bits.
    The problem I have is that yesterday I install Skype in the computer and realized that the HP TrueVision HD web cam does not work. The light right next to the web cam will light up but no image will appear on the screen.
    I have checked the software that  I have in the computer for the webcam and the program is CyberLink YouCam BE version 3.5.
    But the web cam does not work. The light right next to it will turn on when I activate Cyberlink, Skype or Messenger but no actual image will come out in computer screen. The computer is fully updated BIOS, Windows 7 and HP.
    But the web cam is not working. Could you help me fix this problem?
    Best regards:
    JEIO71

    I have a pavilion dv6 notepad. it's about a year old.
    about a month ago internal webcam truevision hd stop working.
    Called hp tech. they sent a box for me to ship the laptop.
    they hp tech attempted to correct the problem via internet
    did not work.
    wanted me to do a restore to factory setting i stopped him there.
    Webcam detected in device manager.
    the webcam light come on but no image.
    I actually see the back drop through the image space.
    running windows 7, fully updated.
    I found many comments on the web about the webcam connector disconnecting.
    But if it was the case with my computer, the webcam would not be detected.
    Many other comments suggests to do a restore to factory setting but \i read also that
    does not work often.
    I read many comments where disappointed clients believe hp should update
    the software but the driver is actually microsoft dating back to june 2006.
    Is it possible it's  a hardware problem, ie webcam is burned out.
    I have received a box to sent it and know they will do a system restore.
    Don't feel to go that way.
    Many comments refers to hp making an effort to get a driver update.
    ps I decided to purchase a logitech webcam, works perfectly.
    What else can I do to fix this problem.
    Can hp send me another internal webcam.

  • Publish to DVD says it completes, does not write the ISO file in version 13.

    When I publish to DVD and select ISO it says it completes but it does not write the ISO file in version 13.

    apsteinmetz
    The DVD disc which is labelled 4.7 GB/120 minutes is in reality 4.38 GB. And the DVD disc which is labelled 8.5 GB/240 minutes is in reality 7.95 GB.
    What version of Premiere Elements and on what computer operating system is it running? Can we assume 13/13.1 on Windows 8.1 64 bit?
    What are you doing, a burn to disc DVD-VIDEO standard or widescreen on DVD disc or burn to disc AVCHD on DVD disc?
    When you get to the burn dialog (and you have your disc in the burner tray), what does the Quality area of the burn dialog show for Space Required and Bitrate with and without a check mark next to "Fit Contents to Available Space"?
    Or, can you do burn to Folder (4.7 GB) and/or burn to ISO Image (4.7 GB)? Are your successful burn to .iso files under 1 GB in file size?
    Please quantitate "...shortening the timeline dramatically".
    Thank you. Any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • Camileo S10 Camera does not remember the image-stabilizer setting

    Hello Forum reader,
    Is it normal that my Camileo S10 Camera does not remember the image-stabilizer setting?
    I mostly use the 720px setting and stablilizer on, but after the camera is turned off the stabilizer is off again.
    Greetzz.. Ben

    Hi
    This might be possible.
    I remember that the focus does not work if the stabilization has been enabled
    So maybe its an intention of the manufacturer that the stabilizer would be disabled again.
    Greets

Maybe you are looking for