Camera does´t work

please some one can help me, the camera on my macbook is not working

Install the latest software update.
http://support.apple.com/kb/HT2090
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Uninstall Air Parrot if you have it installed.
Best.

Similar Messages

My camera does not work on my ipod touch 4th gen. it just goes to a black screen i have done everything from resetting and rebooting... help :(

I fell down the stairs the other day and busted my other ipod to the gamewerks near my house. the guy said he couldnt fix that ipod so he gave me a new one.. a better one a 32GB, the broken one was 8GB. but he told me the only bad thing is that the camera does not work and he doesnt know why... he just couldnt get it to workkk... any ideas on whats wrong?

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

My camera does not work on my macbook, any suggestions to fix it?

my camera does not work on my macbook, any suggestions to fix it?

Here are Applle's troubleshooting steps....
support.apple.com/kb/HT2090

I just bought an Iphone4 from straight talk and my camera does not work. The shutter wont open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile and now that I have it, it does not work properly. Need help

I just bought an Iphone 4 from straight talk. My camera does not work. The shutter does not open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile. I want the issue fixed.
Thanks

Take the iPhone to an Apple store genius bar for testing, and if it is defective and under warranty they will replace. Since you say iPhone 4, was this a used or refurbished iPhone?

Satellite M645-S4050: built in camera does not work correctly

My built in camera does not work correctly.
It does not have any kind of effect on and it captures pictures and videos as if some kind of thermal camera was on.
Also some videos I load up on youtube look like this.
I have been researching for an answer but can't find it, please help me.

All you can do is to test it with latest webcam driver.
Remove preinstalled camera software and install latest version offered on Toshiba download page.
If the same happen again visit nearest Toshiba service and show them how it looks like. Maybe the cam must be exchanged.
In the past I have used several Toshiba laptops with built in cam but I have never saw something lke this.

Hp TrueVision HD web cam does not work. The light will come on but no image appears in the window.

Hi.
I have an HP Pavilion dv7 6178us Entertainment PC I just bought it last week. My operating system is Windows 7 Home Premium Service Pack 1 64 bits.
The problem I have is that yesterday I install Skype in the computer and realized that the HP TrueVision HD web cam does not work. The light right next to the web cam will light up but no image will appear on the screen.
I have checked the software that I have in the computer for the webcam and the program is CyberLink YouCam BE version 3.5.
But the web cam does not work. The light right next to it will turn on when I activate Cyberlink, Skype or Messenger but no actual image will come out in computer screen. The computer is fully updated BIOS, Windows 7 and HP.
But the web cam is not working. Could you help me fix this problem?
Best regards:
JEIO71

I have a pavilion dv6 notepad. it's about a year old.
about a month ago internal webcam truevision hd stop working.
Called hp tech. they sent a box for me to ship the laptop.
they hp tech attempted to correct the problem via internet
did not work.
wanted me to do a restore to factory setting i stopped him there.
Webcam detected in device manager.
the webcam light come on but no image.
I actually see the back drop through the image space.
running windows 7, fully updated.
I found many comments on the web about the webcam connector disconnecting.
But if it was the case with my computer, the webcam would not be detected.
Many other comments suggests to do a restore to factory setting but \i read also that
does not work often.
I read many comments where disappointed clients believe hp should update
the software but the driver is actually microsoft dating back to june 2006.
Is it possible it's a hardware problem, ie webcam is burned out.
I have received a box to sent it and know they will do a system restore.
Don't feel to go that way.
Many comments refers to hp making an effort to get a driver update.
ps I decided to purchase a logitech webcam, works perfectly.
What else can I do to fix this problem.
Can hp send me another internal webcam.

Issue with Apple Camera VendorID_0x106B ProductID_0x1570 green light blinks continually...camera does not work in photo booth or face time

Green light blinks continually...camera does not work in photo booth or face time.Any suggestions?

Hi Rogerya,
Thanks for using the Apple Support Communities. It sounds like you may be experiencing issues with the built-in FaceTime camera (also known as iSight) on your MacBook Air. The following resource provides relevant troubleshooting information that you can try:
How to Troubleshoot iSight - Apple Support
https://support.apple.com/en-us/HT2090
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
1. See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
2. See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
3. Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
4. Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
- Matt M.

I updated my iPad 4 iOS 8.0.2 and the camera does not work, ... Please help

I updated my iPad 4 iOS 8.0.2 and the camera does not work and hangs and unconnected, .... Please help me in this question,... Thanks in advance

You're welcome, but I didn't do anything. Try closing the camera app completely and reset your iPad and maybe that will help.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Upgraded to Yosemite and now camera does not work. Please help.

I just bought a new iMac 27" computer today. I brought it home and it told me I needed to update my iOS. So i did.....now my camera does not work. Does anyone know a fix?
Message was edited by: MCO98

Scott SV wrote:
Hi there - I just completed a leopard upgrade. Strangely enough, after installation and the subsequent reboot, i cannot get the finder to work. Upon clicking on the finder it just sits there and gives the 'waiting' signal (rotating multicolor circle). I opened the activity monitor and killed it, clicked again. nothing. Rebooted numerous times.. nothing. I also tried to install the leopard software update. The files download fine but will not install. I assume this has to do with the finder problem. Any ideas on how to fix this? thanks!!
There are really two "Finders," the one in the dock and the one that actually runs the GUI.
When you click on your desktop, you see the Finder menu on the top right. Do any of those functions work?
For example, if you click Go->Home, does the Finder window open as normal?
If so, you may simply have a corrupted Finder alias in your dock.
I would first run DU and perform a disk check and repair permissions.
How to get to DU? Again, if the top right Finder menu works, select Go->Utilities and run DU from there.

My daughter's iphone got wet and camera does not work. She lives in Madbury, NH 03823. Where can she take it for repair?

My daughter's iphone got wet and camera does not work. She lives in Madbury, NH 03823. Where can she take it for repair?

Yes it does, although I wa a minute faster than you. To see if someone is parroting you, or that they just posted at the same time, look at the head of the post and it will show you the data and time of the post and who they were responding to. Looking at that first saves some misinformation in future posting.
You'll see some posts where there will be 5 posts all in the same minute sometimes. Answer posts late at night and you won't see as many.
BTW, I clicked the Like button on your post where you gave the link for the users manual.

My camera does not work after I restored the system, how can I use it again?

My camera does not work after I restored the system, how can I use it again?
Thank you for your help!

Did try to restore "as new device" without using the backup after that?
Did you try to reset the phone by holding the sleep and home button until the Apple logo coes back again?

My mac camera does not work ! please help i need my camera for an interview !

my mac camera does not work ! please help i need my camera for an interview !

CLICKY CLICK---> http://support.apple.com/kb/HT2090 How to Troubleshoot iSight

My iPhone 6 panoramic camera does not work properly: the arrow does not turn when i turn my phone. Furthermore sonetti da my Keyboard does not turn as well. What do you think si the problem?

My iPhone 6 panoramic camera does not work properly: the arrow does not turn when i turn my phone. Furthermore sonetti da my Keyboard does not turn as well. What do you think si the problem?

Furthermore my keyboard does not turn sometimes as well

After uptade to ios5 my camera does not work

after uptade to ios5 my camera does not work

I have the same issue. I upgraded to ios5 then the camera was frozen and no longer works. I took it into an Apple store and they said I had some hardware damage that look to be consistent with moisture getting in through the headphone jack. I accepted that answer and went on my way since my warranty was over 100 days past and I did not feel like paying $100 for a repair with the 4s upgrade avaible with my account soon. I started to look at some other apps that use the camera, the Facebook photo share in the FB app, the amazon bar code scan, camera+ and they all work. There is definitely some kind of software bug with ios5, based on my experience, that freezes the camera. I would suggest taking it into apple to have it looked at or just using a camera app like camera+ to take pictures.

After "upgrading" from trial to FCPX 10.0.3 multi cam does not work

After "upgrading" from trial to FCPX 10.0.3, multi cam does not work anymore. Everything was fine in the trial version, but now the multicam clip I made in trail is shown, but not with the 4 windows, only the first angle can be seen. And I can not find (import) the cuts I made in the trail. The settings are the same in both versions. Am I missing something? Is it possible that I have to start from scratch and all work is lost?
When I double click the multi cam clip I see all four angles in the timeline, one underneath the other...
Any help is appreciated! Thanks!

There is an excellent podcast tutorial series called "Creative COW Final Cut Help Tutorials Podcast (SD)"
in the iTunes Store.
The latest three are video podcasts and go into great depth concerning the new Multicam in 10.0.3
Can't recommend them enough.

USB Camera does not work with iChat

Hello,
I'm having a terrible time getting my ToUcam Pro II to work with iChat. I downloaded the iUSBcam program. That didn't work. I downloaded the program Macam, and copied the proper file into the Quicktime Library (as suggested) and that didn't work. I downloaded IOXwebcam, and got an error stating that it wouldn't run due to the fact that it didn't have the proper security settings. Sigh.
So... what am I to do?
I'd like to buy a webcam that does, actually, work with my 8 month old Mac Pro 4 core mac desktop, but the iSight camera is ridiculously expensive. Any other suggestions would be appreciated.
Brad

An X-box 360 cam will do it although not in that list.
Anything that is USB 2.0 and marked UVC compliant or Vista Certified.
Be Aware some Mac Keyboards do not have USB 2.0 ports.
11:57 PM Tuesday; September 8, 2009

Camera does´t work

Similar Messages

Maybe you are looking for