Camera doesn't work on iPad 3 with iOS7

Camera doesn't work on iPad 3 with iOS7

Facetime (front side) camera works fine.
But when I use the camera app for the back side camera I see nuthin' but black and when I try to toggle views the app freezes.

Similar Messages

  • Camera doesn't work on iPad iOS 8.1.1

    I have just upgraded to iOS 8.1.1 to my iPad and now the camera doesn't work. I get a black screen when choosing front camera. Is anyone experiencing this problem? If so, do you know a fix?

    Hi,
    I got exactly same issue after that and I swap the old camera with another and it started working again.

  • Can't get face time to work on iPad with ios7

    Face time doesn't work still

    Hi Vonnancy,
    If you are having issues with FaceTime in iOS7, you may find the following article helpful:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Regards,
    - Brenden

  • IPhone 4, with iOS7 camera doesn't work

    Just got a iPhone 4 from my sister when she upgraded and updated it to iOS 7 and the camera doesn't work now. Is there anyway to get it to work?
    Thanks,
    Wayne

    Hello there WayneHope,
    It sounds like your camera is not launching at all. I want to recommend the troubleshooting outlined in this article named:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Camera isn't functioning
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • My ipad front camera doesn't working,cannot take a picture this moment,how to fix this problem?

    My ipad front camera doesn't working,cannot take a picture this moment,how to fix this problem?

    Try closing the Camera app via the taskbar and see if it works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT4623 I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

    I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

    I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

  • I have an iPad two and my front camera doesn't work I have tried resetting it Clicking it twice nothing works can you please help me!!??

    I have an iPad two and my front camera doesn't work I have tried resetting it Clicking it twice nothing works can you please help me!!??

    Try closing the Camera app:
    1. Double-click the Home button to reveal the Task Bar
    2. Hold down the Camera app for a second or two until you see the minus sign
    3. Tap the minus sign to close app
    4. Tap area above Task Bar to return to Home screen
    If the above doesn't solve the problem, do a reset:
    Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider

  • HT4623 i updated my ipad with ios7 but the keyboard does not work as it should hit the letters it is slow and does not click as it should

    updated my ipad with ios7 but the keyboard does not work its slow when i hit the letters does not click did not do this until i updated anyone can help me on this to fix it

    Settings>General>Reset>Reset All Settings

  • The camera doesn't work on my iPhone 5s. It doesn't even work with camera apps. Please help!

    The camera doesn't work on my iPhone 5s. It doesn't even work with camera apps. Please help!

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414

  • Iphone 5c front cam doesn't work...

    hey, as I said my FRONT cam doesn't work on my Iphone 5c.. I had it 2 weeks ago. When I open the photo app its work good for the
    other cam (extern one) but when I wanna take a selfie with the front cam it's like loading and I can't take any picture from the front cam. I'm on an Iphone 5c 8Go on 8.1.2. I was waiting for a bug correction on the new update but it still not working... HELP!
    here the front -->

    Hey there biloute35,
    If you still have not been able to use the front facing camera, I would like to recommend the troubleshooting in the following article:
    Get help with the camera on your iPhone, iPad, or iPod touch
    If you see a closed lens or black screen when you open the Camera app, try these steps:
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping  (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Canon mini Disk camera doesn't work if external drive connected

    A long story.      Anyway, I have a MacPro Intel Dual Core 266 Ghz with 5 Gbs RAM,  4 internal hard drives HD1~HD4 (HD1 OSX 250 and three 500Gb) and two external HD5 (two partitions~HD5 & Time Machine Backups) and HD6 (1 Tb each).
    I've been using a Canon mini DV video camera FV-M10 (Firewire 400) for live video (Skype/iChat) and also for importing video into Final Cut Express, After Effects or iMovie up until a few days ago.  Both "live" video and from the recorded mini cassette tape.  Then all of a sudden not one of the software recognized my camera anymore.  I tried both Firewire 800/400 and USB2 connections using a few different cables. In Skype...(sometimes) it automatically shows the name FV-M10 in the camera slot, but the screen is black.  No, I checked if I left the cover on.  I checked my Sony WX-5 digital camera and see if that is recognized.  Yes, both pics and AVCHD videos are seen using the USB connection. 
    The problem started like this.
    I was downloading a file.  Had to work for an hour and when I came back upstairs.  I noticed that the screen was frozen.   So, I shut the Mac down.  And when I started it again, well nothing happened except for a grey screen.  A half~sized cursor was stuck up in the top left.  But, my mouse also had a cursor which was movable.  
    It wouldn't even recognize the OSX Install Disk holding down "C" or "Option".  Only starting with "Shift" held down, "Safe Boot"  could I use the basics like Mail, Safari, Firefox.   NO sound and no video. Tried a few times as well as cleaned my OSX HD1 hard drive and re-installed from "Safe Boot" mode".   So, I had it sent into Apple Tokyo for repairs.   Apple put in a new board.     Great!      I came it back in two days.   I cleaned the OSX hard drive and re-installed Mac OSX with the up-dates as well and got some of my main backed up stuff Mail, bookmarks, address book etc.   It started fine.     But, when I went to use Skype, iChat, iMovie or Final Cut Express  they still couldn't recognize my camera.  I had been using the Canon FV M10 camera for a few years with both external hard drives on.  There were never any problems until just before I sent it into the shop.
    There was only one way to use my camera.  Un-Plug the external HD6.  Then the camera functions fine.  but remember I had been using this camera with both HD's for around two years without any problems.
    Notes on symptoms:  and what actions I took.  
    Front connections: FW400 Canon camera.  FW800 (Tried connecting HD6)  
    Rear Connections: USB2 1) MidiMan 2 x2   2) mouse  3) Canon Printer
                                   FW400 HD5  FW800 (tried HD6)
    With HD6 Connected.
    iMovie 11 9.02 : Start iMovie  O.K.  No camera on.   Turned camera "on" then "No Camera Connected" notice came up.   (did this a few times)   Turned camera off.   Quit iMovie. 
    2nd start:  Camera On.   iMovie freezes.   Spinning Colored beach ball.   I then Force Quit Option-Apple-ESC
    iMovie shows (not responding)  When I turn off the camera.  (not responding) disappears and iMovie is working again.  But, "No Camera Connected" shows again.  Quit!
    Un-Plugged (Ejected) HD6.
    When I un-plugged HD6,    (tried both the front and rear connections).   iMovie still on.  
    "No Camera Connected"  I Quit iMovie.
    Re-start iMovie:  Camera on… Live video and record miniDV tape can both be seen. 
    Skype:  Both live video and mini DV tape recording even plays back over Skype screen.
    iChat (same as Skype) O.K.
    Since Apple replaced the board 661-3932 Card Video, NVIDIA GeForce 7300 GT which cost just about $X00.00  (¥XX,000).   I assume that they don't also check all the connections etc. I mean from the connector to the video board.
    The call to Apple Tokyo today.  
    Just talked to Apple (Mac) Tokyo about my computer problem.  Seems like they're trying to squeeze their way of more repairs by saying I have a hard drive configuration problem.   But it doesn't seem like that!   I worked with it 2~3 hours today...and  here is the basic problem.
    I've used the Canon FV M10 mini DV camera with Skype, iChat, iMovie and FCEx for few  years  (HD6) is over a year old-the most recent add on) with no problem.    With both external 1Tb hard drives.  And Apple said that it's a 3-party problem.  (different makers etc.)  But, it's NOT!     Yes, they put in a new board.   But, I'd say the problem is from the connection (where I plug the cable into the Mac)  to the board. 
    When I connect HD6 (1Tb ext hard drive).   FW 800 (either back or front connection) the video camera doesn't work in  Skype, iChat, iMovie, or Final Cut Express.     If I eject and Un-Plug HD6  all of them work fine.  The camera "live" or the camera playing back the mini DV tape video.
    Wouldn't this be a problem between the connections (front & back) to the new video board?  Or does anyone have an answer.   Apple seems to have said, "We can't help you".   Please someone help!  thanks

    +My mini isn't responding to startup commands like "C" or "D" from the keyboard.+
    You'll need a wired usb keyboard for these commands to work -- and the Apple Aluminum keyboard won't work either.
    But just about any PC usb keyboard will work. Alt maps to Option and Win-key to CMD.

  • Camera doesn't work in FaceTime

    When Face-timing, my camera doesn't work (I have no image of myself). The box is there, but it is always black (i.e., the person I am face-timing can't see me).
    The camera works fine outside of FaceTime.
    I just reset the IPod touch and now the camera on the opposite side of the screen works, but not the screen side. Also, the Non Screen side camera tends to freeze.
    Thoughts?
    IPod Touch iOS 8.1.2
    Thanks for any help.
    M

    I do not know what you mean by reset. Try the following if you have not done so already:
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                              

  • Html files don't open in ipad with ios7

    how to open mobile index.html file on ipad with ios7. 

    Try this script: http://www.ps-scripts.com/bb/viewtopic.php?t=61
    View actual pixels 100%.ZIP contains pdf instructions on how to install this script file.
    The second script is modified to open the image at 100% in Full Screen mode.
    Both should work from CS2 to CS6.
    Gene

  • Camera doesn't work ! 3 hours old Blackberry Z10

    I just bought my Z10 ! tried to use my camera and it doesnt work ! the screen turns to black and nothing is blocking my camera  ! WTH
    I JUST BOUGHT THIS THING ! Blackberry I hope you aren't wasting my money

    Akrumeta wrote:
    Now I bought the Z10 to find that the camera doesn't work !? nothing is blocking my camera and when I press the Camera button the screen turns to black and nothing happens !
    Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I updated my Ipad with IOS7.1.1. After more then 12 hours, the screen still show the Apple logo. How can I shut it down or reboot it?

    I updated my Ipad with IOS7.1.1. After more then 12 hours, the screen still show the white Apple logo. How can I shut it down or reboot it?

    It works really well.
    Thank you for your tip.
    Alain

Maybe you are looking for

  • Why standard fonts doesn't installed? such: adobe arabic

    i installed latest version of adobe photoshop cc, it wasn't ask me what version do I want to download (english, english/arabic). now i can enable middle east features and type in arabic as well as it is. but why there isn't any font which named Adobe

  • Disable user's responsibility through back end

    Hi , Is there any API , except "fnd_user_pkg " to disable the user's responsibility through back end . fnd_user_pkg is working , but there is bug also . As it's updating both the end_date and start_date . That's problematic from the auditing point of

  • Flash player 11.7.700 post install issues

    installed Adobe flash player thru mozilla firefox, my os is windows XP , when I go online new tabs open telling me to install flash player even tho I already did.  How do I make it stop opening these tabs?

  • Question about the custom panel language

    I have a question about the custom panel language... The document you provide seems to lack details on some features. Namely the icon and picture widgets. I see from looking at the examples and other vendor's web pages that these features exist, but

  • Issue using cfdirectory

    I am trying to use cfdirectory to get a list of the contents of a folder on our web server. I need to be able to define the path via http and when I do this I don't get any listings. When I test this on my local machine the tag works if I use the act