Camera driver lost on IPAD3!!!

after upgrading to iOS6 I lost the camera driver of my IPAD3 ..... the message comes: "your device does not have camera"... or something similar!!! Does anyone got this problem before?

Check your Settings > General > Restrictions : should be disable > Camera: ON?
If it's correct,
do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.
If no joy, do a restore from backup using iTunes.
Lastly, do a restore as new without the backup.

Similar Messages

Since i upgraded to mavericks,my external hard drive lost half of the files ,how can i get them back?

Since i upgraded to mavericks,my external hard drive lost half of the files ,how can i get them back?

Type move itunes library into the google serach bar.
It has always been very basic to always maintain abackup copy of your computer. Do you not have a backup copy?

NVIDIA OpenGL driver lost connection with the display driver

Alienware M14x Laptop
Windows 7-pre 64-bit
8gb ram
3gb Video: NVIDIA GeForce GT 555M
Intel i7 2760QM
AE CS4
AE keeps crashing. I get the following message while doing something as simple as scrubbing through the timeline, or changing opacity of a layer. in 1080p, I have a picture layer, a solid, some color corrections, and that's it. i just got this new computer and i have never had this problem on my old computer.
this message appears after AE crashes."The NVIDIA OpenGL driver lost connection with the display driver and is unable to continue. The application must close."
this message appears in the taskbar: "Display driver stopped responding and has recovered. Display driver NVIDIA Windows kernel Mode Driver, Version 267.21 stopped responding and has successfully recovered"
any ideas on how to stop AE from causing my display driver to stop working?
Thanks, Ramzi Rebeiz

For anyone picking up this thread (it's probably too late for rrebeiz40 by now!) I have come across a simple but apparently very effective tip that has solved the 'OpenGL driver lost connection' issue for many people using various NVIDIA with various Adobe progs (incidentally a lot of these seem to crop up on Dell machines, especially Notebooks).
(It fixed my issue with Premiere Pro CS4 - GeForce GT 555M on Win 7 Ultimate 64-bit, Dell XPSL702X).
It's posted on http://forum-archive.developer.nvidia.com/index.php?showtopic=5331&st=40 (look for the last post, No 50) as follows:
THIS FIX APPEARS TO WORK...found on an Adobe forum
"This issue led me to this fix: go to NVIDIA Control Panel --> Manage 3D Settings --> Global Settings, and switch "Power Management Mode" to "Prefer Maximum Performance" (the default "Adaptive" setting seemed to be the culprit). And that's it! The key here is changing the "Global" setting, as my individual programs were already set to "Prefer Maximum Performance." I can cause the error to reoccur by changing back to "Adaptive."
Otherwise lots more ideas on this site: http://www.instructables.com/id/How-to-Fix...Nvlddmkm-Error/
My PC has been running for 2 days now. I only put the top fix in for now. Feel happier I have more options if need be though.
Inserted from <http://forum-archive.developer.nvidia.com/index.php?showtopic=5331&st=40>
It worked for me

How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor

Hi,
I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
"Windows Embedded CE 6.0 USB camera Driver" downloaded from:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should
be in C# but C++ will be fine also.
Thanks,
   Paul

i get this on the hyperterminal when i run the cameradshowapp.exe
Compulab Windows CE NAND X-Loader for CM-T35
Built Dec 20 2009 at 16:48:16
Version 1.01.222
Commit Date 16/12/09
Jumping to bootloader
Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:
46:16
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b
Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10
Version 1.01.222
OMAP3430 Version 0x4b7ae02f (Unknown)
TPS659XX Version 0x10 (ES2.x)
-OEMPinMuxSetup....
System ready!
Preparing for download...
INFO: Predownload
+FMD_Init
Checking bootloader blocks are marked as reserved (Num = 6)
+FMD_Init
WARN: Boot config wasn't found, using defaults
+FMD_Init
OALFlashStoreOpen: 4096 blocks, 64 sectors/block
OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks
Calling LCD_TurnOn
+FMD_Init
+FMD_Init
BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua
l size =0x4d3a!!!
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...
Hit space to enter configuration menu 2...
Hit space to enter configuration menu 1...
INFO: Boot Device location = 0x8000020
Load NK image from flash memory
+FMD_Init
ROMHDR (pTOC = 0x823b8c28) ---------------------
DLL First           : 0x4001c001
DLL Last            : 0x41c7c0d8
Physical First      : 0x84001000
Physical Last       : 0x863bbdec
Num Modules         :        294
RAM Start           : 0x863c0000
RAM Free            : 0x863d5000
RAM End             : 0x90800000
Num Copy Entries
Copy Entries Offset : 0x85256e38
Prof Symbol Length : 0x00000000
Prof Symbol Offset : 0x00000000
Num Files           :        116
Kernel Flags        : 0x00000002
FileSys RAM Percent : 0x00000020
Driver Glob Start   : 0x00000000
Driver Glob Length : 0x00000000
CPU                 :     0x01c2
MiscFlags           :     0x0002
Extensions          : 0x84002020
Tracking Mem Start : 0x00000000
Tracking Mem Length : 0x00000000
NK Image Loaded
Launch Windows CE image by jumping to 0x80001000...
Windows CE Kernel for ARM (Thumb Enabled) Built on Apr 5 2011 at 17:47:22
+OEMInit
ýSETDATAOUT access is OK....
Forcing clean boot
MainMemoryEndAddress = 0x90800000
-OEMInit
+FMD_Init
Dumping registry defined VK
Row 0: 0x18    0x9     0x25    0x0     0x0     0x0
Row 1: 0x26    0xd     0x28    0x0     0x0     0x0
Row 2: 0x27    0x24    0x23    0x0     0x0     0x0
Row 3: 0x0     0x0     0x0     0x0     0x0     0x0
Row 4: 0x0     0x0     0x0     0x0     0x0
Row 5: 0x0     0x0     0x0     0x0     0x0     0x0
SMSC922x: Core Ethernet Init.
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:0a:a0:db
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:09:88:80
SDIO8686: Loading Driver [version = 38.p44]
SDIO8686: Reset with TPS GPIO 2 --> done
!!!Kernel mode PSL 'PRdr' de-registered!!!
!!!Kernel mode PSL 'HRdr' de-registered!!!
!!!Kernel mode PSL 'FRdr' de-registered!!!
EHCI USB Host: HcdPdd_Init+
[OTG] OMAPMHSUSBOTG::Init()+
OMAPMHSUSBOTG::PostInit(): Start.
DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52
Display parameters:
        Height = 0x280
        Width = 0x1e0
        HSW = 0x20
        HFP = 0x8
        HBP = 0x17
        VSW = 0x1
        VFP = 0x4
        VBP = 0x3
        DVI is not enabled
        PixelClkDiv = 0x7
        LogClkDiv = 0x1
        ClkSelDSS = 0x5
TD035:: LCDTurnOn
TD035STEE1: Turned display on.
TD035:: Finished LCD VGA init
AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
Can't open HKEY_LOCAL_MACHINE\Startup key.
[WiFi]: Firmware Version: 9.70.3.23
CCaptureFramework: Failed setting up the camera data.
CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
eFramework: Retrieving the still stream config failed.
CameraDShowApp: Initializing the capture graph failed.

Lenovo n200 3000 0769-BAG vista camera driver?

Hello my friends. I have Lenovo n200 3000 0769-BAG model laptop. My operating system is vista home basic x86. My integrated camera doesn't works sometimes. This event happens frequently at now. The camera driver is not original, it is automatically installed when vista operating system setup. So what can I do? Is there any original camera driver somewhere? Thanks a lot...
p.s: (0689 type camera driver doesn't work at 0769-BAG.)
Message Edited by gizsin on 04-28-2009 07:11 AM

Hi !
I have exactly the same laptop and I had the same problem.
It was hardware related. The camera wire become loose and was not connecting sometimes.
You can, if skilled, solve the problem yourself by following the dismantling videos and correctly plugging in the camera. If you route the cable correctly you'll solve the problem.
Bear in mind that you need some tools, time as you'll have to dismantle quite all the laptop and skills in order not to make things worse...

IPad Photo Transfer: Windows Vista Digital Still Camera Driver Failed

Hi,
I am trying to transfer photos from my iPad to my laptop. When I plug it in to the laptop the Apple Mobile Device USB Driver installs successfully and the Digital Still Camera driver fails. I have previously transferred photos in this way without any problem. When I plug the iPad in to the laptop it does not show up in 'my computer', the iPad is on and the screen is unlocked. Autoplay is on but no menu appears to transfer the photos. The photos I want to transfer have been taken on the iPad. It shows up in iTunes as normal. I can transfer photos from my iPhone to the laptop without a problem.
This is what I've tried:
- uninstall iTunes and reinstall
- restart the computer
- turn iPad on and off
- uninstall and reinstall apple device driver (even though it was up to date and said to be working as usual)
- plugged it in to an old laptop (windows xp) and it worked as expected
- checked for usbappl.syn in C:\Windows\system32\drivers and it is present
- uninstalled all Apple content from my laptop and reinstalled it all again
- repaired the Apple Mobile Device Support program
Any help would be much appreciated, it is driving me crazy!

Hi
I've had similar problem with my Iphone 8gb 1.1.2 OTB and Windows Vista right from when i purchased it. I tried calling Apple support and tried out all the things that you've done so far and got fed up with it. Now I download my pictures using a third party software called TouchCopy. Apple was not able to identify the issue but it certainly an issue with the OS and not the Iphone. It works like a breeze with my Windows XP PC at home but my laptop doesn't recognize it and it just gives "device installation failed". But curiously for sometime like 15 days ago, the device driver got installed but still I didn't get the camera icon in MY Computer... So if somebody could help... great!!!
And Hail Vista because I've had several driver issues like these and my antivirus is OneCare so I don't think Microsoft could complain about my installations.
Cheers
Andrew Sam

For those who have problems RE: My iPhone 4 on connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??

For those who have problems RE: My iPhone 4 connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??
SOLUTION:
Iam pointing t0 windows7 os.
1) go to control panel
2) open hardware and sound
3) In that open Devices and printers
4)In that u can find Apple Iphone.
5) now right click on this --> Hardware --> Properties --> General --> Uninstall --> ok.
6) now unplug and plug in ur iphone again.There u go u iphone name changes to its original name.

I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems.

Windows XP SP2 - Camera driver will not load

Have the same problem on two different machines. iTunes sees the phone and all the things in it sync as expected, Contacts, Calendar, Pictures, Music, etc.
The first time I connected the phone after taking a picture, I get the pop up showing that Windows sees the Digital Still Camera. Shortly after that I get the "Windows encountered a problem" message stating that my new device might not work properly. The phone is connected directly to the PC's USB 2.0 port using the cable that came with the phone.
Device manager shows the Digital Still Camera with the yellow exclamation mark on the icon. The device status reports...
"Windows cannot load the device driver for this hardware
because a previous instance of the device driver is still in memory. (Code 38)"
I removed iTunes 7.3.1 and reinstalled it. I removed the camera driver, rebooted, and let Windows re-recognize the camera. Same problem, both machines, both XP Pro SP2.
Any ideas?
Windows XP Pro

Resolved. No wonder I'm the only one that encountered this.
I use a Visioneer Strobe Pro USB sheet fed scanner.
http://support.visioneer.com/products/mobile/EOL/StrobePro/
In Device Manager under Imaging Devices, it was showing Digital Still Camera (with the yellow exclamation mark) and Visioneer StrobePro USB Scanner.
On a whim, I decided to unplug the scanner. Then I closed the scanner driver via its icon in the system tray. Within a few seconds, Device Manager updated itself, Digital Still Camera had changed to Apple iPhone. Right away I got the 'Camera connected' dialog asking how I wanted to retrieve the photos from my device. It also shows up in My Computer under Scanners and Cameras. Problem solved.
Next I plugged my scanner back in and now it's got the yellow exclamation mark indicating a problem with the driver. No big surprise.
Once I disconnect the phone and plug the scanner back in, Device Manager updates again and the scanner driver shows back up without the yellow icon. Lastly I reload the scanner driver.
I'm not sure why these two conflict. Don't know if Windows forbids more than one imaging device to be connected at a time or what. Maybe the scanner driver is so old that it doesn't behave properly...it's certainly not certified on XP.

Camera Drives (CompactFlash) no longer mount with Aperture 2.0

Has anyone noticed that camera drives no longer mount in the finder. This means that we no longer have access to these drives in the Finder. I believe this started with the release of Aperture 2.0.
Stellarphotorecovery no longer sees these drives.
In addition, files saved to the flash cards (scanned images) are no longer seen by Aperture, iPhoto or Image Capture.
Anyone have any idea on how we can mount these devices?

I have been running the Aperture 2.0.1 upgrade for some time now and still can't import Aperture albums. It's all or nothing.
Does anyone else continue to have the problem after upgrading to 2.0.1?
Thanks

HP SimpleSave used as external drive - suddenly back to unformatted unusable drive - LOST ALL DATA

I was in the process of moving photos from my laptop to my external 1TB SimpleSave drive and all of a sudden the drive lost it's format and appears as the HP Launcher and an unusable 'Local Drive' (my drive name is gone, all my data is gone including the photos I just copied over an hour ago).
Are these drives unstable? I've hardly used the thing and am now wary of using it. Is there a way for me to recover the lost formated drive? I have a second copy of most of the data, but I just lost 500 photos.

Ok, i have found a solution...
What has happened is Windows has changed the hard drive from its original form, a NTFS format to a RAW format.
According to other forums, this happens when Windows detects a partially incomplete re-format attempt. I do remember formatting the external a week after i got it, but it seemed fine???? moving on....
From what i have come across, RAW is an obsolete format that XP, Vista and Windows 7 dont recognize anymore... short of having an old pc that runs Win 95, Win 98 which WILL recognise it, i tried several different ways, heaps of different recovery tools etc etc...
i "found" a program called Power Data Recovery! It rules so much!
anyway, i installed it, and done the following -
from the program front screen -
- Advanced Recovery
- click on the drive (in my case its displaying as Physical Drive, 930.86Gb)
- click on full scan
Initially it said it was going to take 600hours but bare with it... it will speed up...
i was too curious to wait for the full scan so i stopped it at like 7%, then previewed the files it had recovered, checked the tick box on a couple of mp3 i wanted to preview, and clicked save...
-saved them to my desktop
-tested the files (mp3s) through winamp and they played fine!
I am just re-starting the recovery process from scratch and will leave overnight.. once completed, I will transfer the recovered files to another external, then re-format the affected external drive again, then transfer the files back to its FIXED home... DONE!
Hope this helps ya'll...

Problem with camera driver

Product Name:
HP Pavilion DV3-4009EE
Operating System installed:
Windows 7 64-bit
Error message:
"the camera is not exist"
Changes made to my system before the issue occurred
I did a mistake and I uninstalled the Camera driver from the Device Manager and deleted from System.ini !
and I want to get back the driver

Product Name:
HP Pavilion DV3-4009EE
Operating System installed:
Windows 7 64-bit
Error message:
"the camera is not exist"
Changes made to my system before the issue occurred
I did a mistake and I uninstalled the Camera driver from the Device Manager and deleted from System.ini !
and I want to get back the driver

Camera driver for s110

Can anyone tell me how to download camera driver for ideapad s110 ..thanks

Hi
Welcome to the community.
As per your concern, I would suggest please visit the mentioned below web link and install the camera driver.
http://download.lenovo.com/UserFiles/Driver/en/Downloads%20and%20Drivers/S10-2/win%207/IN1CAM10WW5.e...
After that visit the mentioned below web link and install the camera software.
http://download.lenovo.com/UserFiles/Driver/en/Downloads%20and%20Drivers/G550/Windows%207/IN2STW01WW...
Afterwards, please restart the system and check whether the issue gets resolved.
Regards,
Sameer
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Camera driver for 15s-008TU

I could not find a suitable camera driver for the product 15s-008TU ( laptop 4th gen intel core i3). I have installed windows 7 64 bit OS on it.

One from the folowing URL should be what you need to make it work.
http://h10025.www1.hp.com/ewfrf/wc/previousVersions?softwareitem=ob-131219-1&cc=us&dlc=en&lc=en&os=4...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How to download ni imaq usb camera driver

sir
i wants to download ni imaq for usb camera driver but i am unable to download it from specified position given in website . please tell me how i can download this software or there is any other link for downloading it.
this is adrees from where i was trying tom download it.
ftp://ftp.ni.com/pub/devzone/epd/ni_imaq_usb_installer_86.exe
please tell methat what is the problem.
mpsingh

The link you gave in your post is working form me. Maybe a firewall which can be located local or in your company network is blocking FTP downloads or downloads of files of type exe.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

What must I do to properly install my ipod's drivers and not just the ipod's camera driver??

What did I do wrong when I first activated my ipod touch? Only the camera driver appears installed when I connect my ipod to my pc. How do I correct this problem? What must I do in order to install the proper drivers in order for me to access all order options, programs or applications? Thanks you all for any help!

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Also, if you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar

Camera driver lost on IPAD3!!!

Similar Messages

Maybe you are looking for