Camera failed. System error

Can`t start camera after factor reset and update, have all applications and notes and contacts itc, but can`t start camera application, did factory reset to improve performance since phone became very lagy!

kolotei wrote:
Can`t start camera after factor reset and update, have all applications and notes and contacts itc, but can`t start camera application, did factory reset to improve performance since phone became very lagy!
I have a similar problem, after the Anna update and Anna Service Pack.
System error. No camera.
Also, when I install the Beta Labs camera update, I get the message "Unable to install. Component is built-in."
I found a "Camera Application" installed on the phone. I uninstalled it (hey, when the camera on the N8 doesn't work, you pretty much don't have an N8 anymore). That restored the camera to apparently the pre-Anna, pre-Beta Labs update version.
Then, I re-ran the Beta Labs Update. But, still got the "Unable to install. Component is built-in."
Then, I remembered there was, in the Beta Labs, a camera update supposedly for phones that don't yet have the Anna update. Unfortunately, that's only available through the SW Update app or through one of the PC-based sofware updaters. My phone does not show it needing the camera update.
For the last three days, I've been struggling since my N8 appeared to take the Anna update, then I found I'd lost Adobe Reader. Quickoffice support told me to uninstall the version of Quickoffice with Anna, which I did. When I attempted to install the paid version of Quickoffice I've purchased, it didn't install. Quickoffice support told me to re-flash Anna and at that point, my phone refused to reinstall Anna.
So, now I have no Adobe Reader, don't have the better version of Quickoffice that I purchased, and don't have the Anna camera update.
It looks as if I'm going to have to do a full reset ("three-fingered") and hope I can reinstall Anna and all my apps.

Similar Messages

Failed 'System Error'

I Have a HP LaserJet Pro P1102w printer successfully connected to the HP ePrint service.
I am able to email & print basic emails and also emails with attachements from it using any webmail service.
If I send an email from our server in work that doesn't contain an attachment - this prints off fine...
However, when an email is sent from our e-mail server in work with an attachment.. I get the notification email back to say 'ePrint job received'..but nothing prints out at the printer.
When I check in the printer activity in the HP ePrintCenter online.. it always displays the status as 'Failed - System Error'
Anyone any ideas why this could be?
Thank you!!

Also getting this. How do I get details on what's causing the issue? Can anyone help debug? Need email headers?

Gnupgp, pacman-keyring -- keyserver receive failed: System error|why?

Hello, I followed the official instructions about gnugpg and the pacman keyring https://www.archlinux.org/news/gnupg-21 … n-keyring/
pacman -Syu haveged
systemctl start haveged
systemctl enable haveged
rm -fr /etc/pacman.d/gnupg
pacman-key --init
pacman-key --populate archlinux
which worked fine for the main repositories.
As I use the infinality-bundle repository I had to re-add the key for infinality but that led to that error:
# pacman-key -r 962DDE58
gpg: keyserver receive failed: System error w/o errno
==> ERROR: Remote key not fetched correctly from keyserver.
Meanwhile I know that changing the keyserver to the mit-keyserver prevents that error:
/etc/pacman.d/gnupg/gpg.conf
no-greeting
no-permission-warning
lock-never
keyserver hkp://pgp.mit.edu:11371
keyserver-options timeout=10
This combination of problem and solution is shared by two other users:
https://bbs.archlinux.org/viewtopic.php … 6#p1482676
https://bbs.archlinux.org/viewtopic.php … 9#p1482709
So while the solution/workaround is clear, I'd like to understand why that problem appeared in the first place.
Any idea?

So it's probably not my fault? Good to know. Maybe the server was overload due to that gnupgp change?
Thanks for your answer!

Employee Photo Upload Fail - "System error when archiving"

Hi all,
When i am trying upload a photo of an employee in our ESS development portal its working fine. But the issue here is when i am trying to upload the same in testing ESS portal its displaying an error message as "System error when archiving a photo" and i tried to upload the photo in back end also at that time its displaying an error as "HTTP error :401 unauthorized".
Kindly help me to resolve this problem ASAP.
URGENT!!!!!!!
Thanks in advance..!!!

Hi Van,
Thank you for your reply. Finally we found the solution for this. The Issue was that the user CONT_SERVER in SICF(tcode) -> Content Server was locked. We unlocked it , now the photos are uploading successfully...

Windows 8 backup (Win7 File Recovery system image) creation to NAS device fails with error 0x807800C5

Hi,
I have a ZyXEL NSA310 NAS device on my network that I use for backups (as well as a media server). I have been very happy with it as, amongst other things, it has a gigabit Ethernet connection. I recently upgraded my home laptop from Win7 Pro to Win8
Pro. Under Win7 the NAS device worked perfectly as the backup target. I could back up file sets and - most importantly to me - create a system image on the device should I need to restore the system in the event of a full disk failure.
When I upgraded to Win8 it kept the Win7 settings and it looked like it was just going to work, then as it came to create the system image it failed with error code 0x807800C5 and message "The version does not support this version of the file format".
I have searched the internet and seen that others have had similar issues on Win7 and Win8 with NAS devices where they have had to hack the device to get it working - though it isn't clear that this has been successful for everyone. This isn't an option
for me as the NSA310 is a closed device and in any event I don't see why I should have to hack the device when clearly this is a Win8 issue (since Win7 worked perfectly).
Does anyone have any ideas how to fix this issue so that I can create the full backups I require?
Thanks,
Phil
Event Log messages:
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          13/01/2013 23:14:52
Event ID:      517
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Home-Laptop
Description:
The backup operation that started at '‎2013‎-‎01‎-‎13T23:13:43.523158000Z' has failed with following error code '0x807800C5' (There was a failure in preparing the backup image of one of the volumes in the backup set.). Please review the event details for a
solution, and then rerun the backup operation once the issue is resolved.
Log Name:      Application
Source:        Windows Backup
Date:          13/01/2013 23:14:56
Event ID:      4104
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Home-Laptop
Description:
The backup was not successful. The error is: There was a failure in preparing the backup image of one of the volumes in the backup set. (0x807800C5).

Thanks willis! I will look into the iSCSI route. A quick Google search and I can see some mention of the NSA310 and iSCSI so maybe it does support it.
One question: Have you ever attempted to restore a system image from a NAS iSCSI device with a Win8 Restore Disk? Is it easy? I just want to be sure that it is possible to do so in case the worst happens and I need to restore the entire image onto a
new disk.
Hopefully Microsoft will fix the issue with the standard NAS setup with an update in the future, but I don't want to wait for it.
Thanks again,
Phil
Hi Phil, No I have not had to do this yet, but I see no reason why it shouldn't work as the iSCSI disk looks just like a regular hard disk to the OS. I agree that Microsoft should fix the direct NAS support as the iSCSI approach does have the downside
of dedicating a fixed chunk of your NAS drive to the iSCSI disk that you have to choose when you create the disk whereas the direct NAS just uses the actual space currently needed by the backup. Also I had some trouble getting authentication (access rights)
to work so I left the iSCSI portal as open access - which is OK for a home solution but not a good idea in general. I will revisit this for my own setup and see if I can get it working but just wanted to mention it in case you have the same issue. It manifests
itself as not being able to connect to the iSCSI portal due to failed authentication when running iSCSI initiator setup.
-willis

When i try to update RAW i get this error message Photoshop Camera Raw 6.7 Update Installation failed. Error Code: U44M1P7 ?

When I try to update camera raw files in CS6 I get the following error message
Photoshop Camera Raw 6.7 Update
Installation failed. Error Code: U44M1P7
What do I do?

Which version of photoshop and operating system are you using?
The reason i ask, even though you wrote cs6, is the camera raw 6.7 update is for photoshop cs5.
Did you try Help>Updates from within photoshop to get the most recent version of camera raw, which is 8.7 for photoshop cs6?

SSAS Cube Dimension Processing Fails Reporting: File system error: A FileStore error from WriteFile occurred

Hi,
I have a SSAS Cube Database for which the processing had been stopped since the year 2012, but as the requirements have again come up, this cube needs to be processed on a daily basis again, to refresh the cube with new incoming data.
As i was testing the cube processing steps before finally re-activating the cube processing in production, i came across a weird error while doing a manual processing for a Dimension.
File system error: A FileStore error from WriteFile occurred. Physical file: \\?\D:\MSAS10.MSSQLSERVER\OLAP\Data\Citi.184.db\Dim Extended Data.0.dim\54.Extended Data.ksstore. Logical file: . . Errors in the OLAP storage engine: An error occurred
while the 'Extended Data' attribute of the 'ExtendedData' dimension from the 'Citi' database was being processed.
This error came to me while i was doing a process update for the dimension, i even tried to do a Process Full for the same dimension which did not help. I then did a Unprocess and then a Process Full, which didn't work as well.
Can anyone please help me with this issue. I am using the SQL Server 2008 where the cube is hosted and the processing used to work fine earlier, but now its failing with this error.
Thanks

This looks like the 4GB string store limit. If you can upgrade to SQL Server 2012 Analysis Services, you can change a simple setting and grow beyond that 4GB string store limit.
http://technet.microsoft.com/en-us/library/gg471589(SQL.110).aspx
If you can't upgrade, what data is in that ExtendedData attribute? If it's a meaningless surrogate key that you don't need users to see, you can use this trick to avoid the 4GB string store limit:
http://cwebbbi.wordpress.com/2012/08/10/storage-and-the-namecolumn-and-keycolumns-properties/ But if it's something the users need to see, there's not an easy way to fix it without upgrading to SSAS 2012.
http://artisconsulting.com/Blogs/GregGalloway

TS4123 A recent download of an iTines update - for whatever reason - failed on my computer. Since then I get a system error statement telling me that the program cannot open because 'MSVCR80.d11' is missing from my computer. When I attempt to open iTune

A recent download of an iTunes update, for some unknown reason, failed on my computer. Since then I get a system error message everytime I log on telling me that the program cannot be opened because 'MSVCR80.d11' is missing from my computer. When I try to open iTunes I get an 'error 7 (Windows error 126)' message and am advised to reinstall iTunes. However, when I attempt to do this, it downloads the programme and gets as far as installation, at which point I get yet another message: this time 'Service Apple Mobile Device failed to start'.
I am at a loss to know what to try next and would appreciate any assistance. I'm also concerned that, in the process of reinstalling iTunes, I am going to lose all the music I have collected over the years.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99602)

Java System error: SSO not authorized: authorization Failed

Hi,
I am getting the following error while opening a BEx report designer or WAD and iam unable to design any report or create a dashboard
"Java System Error: Call to FM BICS_CONS_GET_VIEW_DEF_J_PROXY to ProdId ASEP_PORTAL_E01 on host ASEP wiht SSO not authorized . Authentication Failed"
System Details:
BI and EP are installed in Same server
BI Config:
softwarwe component : SAP_BW
Release : 700
Patch Level: 0021
Support Pack : SAPKW70021 (SAP NetWeaver BI 7.0)
EP config:
SAP NetWeaver BI 7.0 SP Level 15
Please suggest .

It seems that something wrong in integration between JAVA Stack (from where you accessing BW report) a BW back end system. Try to run Support Desk Tool:
http://<your_server>:<port>/irj/servlet/prt/portal/prteventname/HtmlbEvent/prtroot/com.sap.ip.bi.supportdesk.default
to see what is wrong in this area.

Iphone 5- Won't show up in itunes. Error message " Device drivr software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

Error message " Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

Hi, I was able to reformat my iPod and that worked. I read it on one of the threads and I am copy pasting the method below:
I opened the "My Computer" window and right-clicked on my ipod, and then selected "Format". I select "Yes" to format since I don't have anything on the nano to delete anymore.
I then Eject my nano from the computer and did a restart while the nano is disconnected from the computer.
Once Windows finish loading I reconnect the USB to the nano(back of computer) which automatically pulls up iTune. It asked me to name the new ipod detected and created a playlist for that specific ipod name.
Pasted from <http://discussions.apple.com/thread.jspa?threadID=1050784&tstart=15>
Thanks!

Analysis Services failing to Start . File system error: Error occurred during the creation of directory

Hello All,
Posting this problem here and hoping for a solution from the experts in this forum.
When i have restarted the Analysis Services , i see that it has been stopped but never started back. It fails with an error
"The SQL Server Analysis Services (MSSQLSERVER) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
When Checked the Event Viewer i see the following error -
The service cannot be started: The following system error occurred: The filename, directory name, or volume label syntax is incorrect. File system error: Error occurred during the creation of directory: '\\?\E:\OLAP\MSSOLAPFactory\OlapData;M:\Test
Backup'.
I remember changing the BackupDir value of Analysis Services few days back, and i think it could have impacted. Can you please help me how can i change back the BackupDir value and have the server back?
Let me know if you need any more details
SG

Is this still an issue? If so, I would find msmdsrv.ini and make sure you don't have two folders listed in the BackupDir (or DataDir or TempDir). You'll have to runas Administrator to edit the msmdsrv.ini file and save changes. Once you fix that, it should
succeed.
http://artisconsulting.com/Blogs/GregGalloway

System call failed. Error 2 (The system cannot find the file specified. ) in execution of system call 'CreateProcessAsUser' with parameter ( , NULL, Program Files/sapinst_instdir/BS2011/ERP606/AS-ABAP/SYB/HA/DB, &StartupInfo, &ProcessInfo),

Dear All,
I am getting a below error while doing ehp6 installation on sybase (high availbility )
can any one help me on this..?
An error occurred while processing option SAP Business Suite 7i 2011 > Enhancement Package 6 for SAP ERP 6.0 > SAP Application Server ABAP > SAP ASE > High-Availability System > Database Instance( Last error reported by the step: System call failed. Error 2 (The system cannot find the file specified. ) in execution of system call 'CreateProcessAsUser' with parameter ( , NULL, Program Files/sapinst_instdir/BS2011/ERP606/AS-ABAP/SYB/HA/DB, &StartupInfo, &ProcessInfo), line (646) in file (d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp), stack trace: d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\ejscontroller.cpp: 181: EJSControllerImpl::executeScript() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\jsextension.hpp: 1059: CallFunctionBase::call() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\osmod\iaxxbprocess.cpp: 423: CIaOsProcess::start_impl() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp: 238: CSyChildApplicationImpl::start(false) d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp: 262: CSyChildApplicationImpl::doStart() .). You can no
Regards,
Letz..

Hello Mauricio.
Thanks
Two Thinks:
1.- This error appears precisely in the process of creating SAP users including you mention sidadm:
      A.- Execute sapinst
      B.- Installation option is chosen
            SAP NetWeaver CE Production Edition
                    Installation Options
                        High-Availability System
                              Central Service Instance (SCS)
       c.- System ID, Next and appear message error
2.- However, the user manually create sidadm, I gave the permissions you indicate, and the error message is the same
Thanks

The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppres

I am looking at an issue with users not getting specific group policies.
After searching a number of client computers I found that the following error
The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
I can find the folder in the Sysvol folder on all of the domain controllers.
The issue with end users seems to be that the proxy settings for internet explorer is not being applied.
Potential problems?
one folder in sysvol entry is empty
\\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
or is this our issue
The old method of configuring proxy settings to Internet Explorer 9 has changed?
https://support2.microsoft.com/kb/2530309?wa=wsignin1.0
http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/

Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

Installation of Updates for Photoshop CS6 failed. Error code U44M1U5 for Camera Raw and U44M1P210 for Adobe Application Manager

The Installtion of updates for Photoshop CS6 failed. Error code for Update of Adobe Application Manager is U44M1P210, for all other features (Adobe Bridge, Photoshop CS6, Camera Raw) U44 M1U5

You go Photoshop CS6 > Help > Updates ...

I ran an iTunes update. It failed with the message System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem. I tried reinstalling but get the same message.

I ran an iTunes update. It failed with the message "System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem." I tried reinstalling but get the same message. I looked in my Recycle Bin for that file name but there is none there. Is this a new file that iTunes wants?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683)

Camera failed. System error

Similar Messages

Maybe you are looking for