Camera File & Premiere Compatibility Question

Sorry if this is a stupid question and has been asked before. I tried searching the forum but didn't see any other similar questions.
I have a Canon 70d and have been making little videos, mainly of family stuff, and have been using Windows Movie Maker to edit. However, I am looking into the Creative Cloud for Photoshop and Illustrator and was thinking of getting Premiere as well but I know the older version doesn't support the 70d file type.
My question is does the new CC version support 70d files and if not is there a converter I can use to make it work, preferably free because this is just a small side hobby. (I found one free program that worked but it put a big watermark on my videos which I didn't like, obviously) Really, I don't want to have to pay for a program only to pay for another program to make it work.
Any help would be grateful!!

Hi
When you create your icd file, the height value, will be the maximum number of lines you can accumulate.
So when you will use your camera with MAX or LabVIEW, you can specify an image height within 1 and this value.
I suggest to set this value pretty high (10000 lines for instance) so that you are free to request a big image in your application.
Regards

Similar Messages

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

Does it not play at all or cannot you get the audio in the timeline?
Did you copy the entire card to the hdd and then imported the file via the Media Browser?
Did you source patch the audio tracks?

Question about camera file generator

Dear all,
I was trying to set up my camera with the frame grabber using camera file generator. My camera is a linescan camera, which is 1024x1 pixels.
My question is, in the camera file generator, I can choose to display maximum number of rows which could be any number I key in, for example, I can choose to display 1024x256 or 1024x800.So since my camera has only one line of pixels, where are all the other rows come from?How does it work?
Thanks a lot!

Hi
When you create your icd file, the height value, will be the maximum number of lines you can accumulate.
So when you will use your camera with MAX or LabVIEW, you can specify an image height within 1 and this value.
I suggest to set this value pretty high (10000 lines for instance) so that you are free to request a big image in your application.
Regards

Would like to purchase PSE 12 to process Camera Raw files for the following cameras: Nikon D800, Nikon DF, Canon G9 and Pentax K-3 does the Raw Converter that comes with PSE 12 when purchased recognize the cameras listed in the question or do I need to

Would like to purchase PSE 12 to process Camera Raw files for the following cameras: Nikon D800, Nikon DF, Canon G9 and Pentax K-3 does the Raw Converter that comes with PSE 12 when purchased recognize the cameras listed in the question or do I need to download the camera Raw Version 8.3 ?

While the G9 RAW files can be read by Adobe Camera RAW and Lightroom, these file are unsupported at this time. Here is a link to Adobe's latest list of cameras that are supported and this list came out yesterday http://www.adobe.com/products/photoshop/cameraraw.html
I have not done a comparison between Lightroom and Canon's software but others have and say that Canon's software is clearly better. I am sure when Adobe updates their software again to include the G9 it will be a very good RAW converter as it is will most other cameras.

How do I get rid of the flashing file with a question mark in it?

I wanted to start clean on my MacBook Pro osx 10.9.4. So I did the command r and erased what I thought was the right one. I restarted my computer and did the command r again and what came up was internet recovery. It can't find my internet because it's WEP and I don't know to change it to wpa. So I restarted my computer again and I didn't do the command r but just let it load itself to see what would happen and all I get is a flashing file with a question mark. I don't know what to do. Someone please help me.

Do you get this display?
If so, you have to select an Internet connection. Do not expect quick response time in this mode. All activities in this mode will be lengthy.
Ciao.

Hi can anyone help with a mac that had magnet put on it. I turned it on and then off but a white screen appears with a file with a question mark on it?

Hi can anyone help with a mac that had magnet put on it. I turned it on and then off but a white screen appears with a file with a question mark on it?

File icon with ? mark on it means it can't read from the hard drive. The hard drive is now wiped or bad. If just wiped then you will need to reinstall your operating system, OS X. If bad you will need to replace the drive.
Start with booting the computer from the OS X install DVD that came with your system. If the Mac came with Lion Pre-Installed then you use the Lion internet recovery system to reinstall (Hold down Command+r keys or Command+Option+r keys to boot the computer from over the internet to the Lion recovery HD system).
Good Luck.

Restarted and received a blinking file folder with question mark image.

I left my computer sitting while I was working on homework long enough for the screen saver to come on (I'm not sure exactly how long it was). Earlier in the day, I had to force quit safari and then later it unexpectedly quit several times. While my computer was sitting, it looked like it does when it restarts. I waited until it started to come back up, and instead of coming up to the desktop, it came up with a blinking file folder and question mark. I had not done anything unusual with it, and had not tried to restore it. My dad was working on trying to fix it, and inserted the OS X disk. When the options came up, in the repair feature, the disk could not locate my harddrive. I was wondering if anyone else had encountered this problem, and if so how it was resolved. If anyone had any tips or ideas of things I could try that would be great. I can't really get it to an apple store soon, and I'm a student so my computer is very important to me. Thanks.

Mornin' John,
I also have an OWC external firewire drive that I tried to install OSX Tiger to but was told that I could not install OSX Tiger on the external drive.
What Format is that Drive? GUID/MacOS Extended? It should work if the right format.
Is there any way to run Disk Warrior from the external hard drive ... to try and rectify this issue, or at least get my data off the dead drive (if it is so)?
From the external only if you can get OSX installed.
What version is it? Do you mot have the CD?
or from my PowerBook G4
Possibly, with the MaBook in FW Target Mode
http://docs.info.apple.com/article.html?artnum=58583
If DiskWarrior can't fix it, you might try Data Rescue II...
http://www.alsoft.com/DiskWarrior/
http://www.prosofteng.com/products/data_rescue.php
(Has a Free Demo to see if it could or not, but you'll need another drive to recover to).

White screen with flashing file icon with question mark mean

What does this mean. We are getting a white screen with flashing file icon with question mark inside the file.

It almost certainly means it can't find a bootable volume (one with OS X on it).
Which means most likely you will have to find your original system installation DVD and install it. Then you should figure out what caused the problem.
Read this to diagnose it before resorting to reinstalling the OS:
http://support.apple.com/kb/TS1440
Excerpt:
Additional steps
If your Mac still starts to a flashing question mark, follow the steps below. If any step resolves the issue, you don't need to continue to the next one.
Select your Mac OS X startup disk with Startup Manager by restarting and holding the Option key. After your Mac starts up, restart again to verify that the flashing question mark does not appear.
If the issue persists, insert your Mac OS X installation disc. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc.
MacBook Air note: On a MacBook Air, there are two options for starting up from Mac OS X media: Either connect a MacBook Air SuperDrive to the MacBook Air via the USB port and restart the computer, holding down the C key during startup, or use Remote Install Mac OS X to startup from a system software DVD that's located on a partner computer. Once started up from Mac OS X media, skip to step 3.
Restart the computer, then hold the C key during startup.
From the Utilities menu, choose Disk Utility. Don't click Continue.
Select your Mac OS X disk (named "Macintosh HD" by default) in the left side of the Disk Utility window.
Click the First Aid tab.
Click Repair Disk to verify and repair any issues with your Mac OS X startup disk.
After repairing the disk, try to start up normally.
Important: If Disk Utility finds issues it cannot repair, you may need to back up as much of your data as possible (or use Time Machine to back up to a different disk), then erase the disk and reinstall Mac OS X. You should back up important files and data before erasing a drive. Erasing deletes everything on the hard disk (including things on your desktop). Also, you can install Mac OS X onto an external disk, start from the external disk, and use Migration Assistant to transfer items from your usual internal Mac OS X startup disk to the external disk, then erase the internal disk and reinstall Mac OS X.
If the issue persists, and Disk Utility didn't find any irreparable issues, quit Disk Utility, quit the Installer, select your disk when prompted, and restart.
If the issue continues, reset PRAM. Note: After resetting PRAM, if the computer starts up normally, reselect the startup disk in the Startup Disk preferences.
If none of these steps resolve the issue, start up from the Mac OS X Installation disc and reinstall Mac OS X.

What Raw camera files are supported by Aperture Ver 3.6. I have tried to file a list of compatible camera models, but as yet can't find one.

What Raw camera files are supported by Aperture Ver 3.6. I have tried to file a list of compatible camera models, but as yet can't find one. My OS is OS X Yosemite 10.10.1. I have recently bought a Canon 7D MkII and have found Adobe Lightroom does not as yet support the 7D MkII. So I though Aperture may support the 7D MkII because Yosemite 10.10.1 now does.

Hi Folk,
I just found the answer to my question. Yes it is supported with OS X Yosemite 10.10.1. See the link below and the ***** Note at the bottom of the list.
http://www.apple.com/aperture/specs/raw.html

Opening Raw Camera files

Question
Sinse Ive updated with Mavericks I've been having difficulties viewing raw camera files in Preview, memory usage is maxed out when trying to view my images.
Has anyone else had this problem? Any suggestions to fix this problem?
Thanks

GarrettNZ wrote:... Has anyone else had this problem? ...
Not I. All three of my OS X 10.9 Macs work fine.
GarrettNZ wrote:... Any suggestions to fix this problem?...
You may have had a bad download or install on your OS X 10.9 Upgrade. Reinstall OS X Mavericks.
Immediately following the restart that completes the reinstall, use the Disk Utility in your Mac's Finder > Go Utilities folder to repair permissions. Then check more than one RAW file in more than one user account to be certain your problem is not user specific.
Message was edited by: EZ Jim
Mac OSX 10.9

Camera File Generator Won't Run with MAX + PCIe-1433

Hi,
I am a camera developer and am trying to integrate a couple of new cameralink cameras with the PCIe-1433 NI frame grabber. I have installed NI MAX 14.0 and version 3.0.0 of the Camera File Generator.
I am trying to build a new Camera File for our companies cameras.
The NI MAX shows the NI PCIe-1433 device when it launches.
When I try to launch the Camera File Generator, it failis to load with the following message:
"You must have NI-IMAQ 4.6.0 or higher installed before running the NI Camera File Generator. NI-IMAQ 4.6.0 is installed with Vision Acquisition Software 2011."
The MAX configuration tree shows I have version 14.0 of the NI-IMAQ software available.
Is there any sort of developer's guide for creating a camera file to allow me to use my camera? I need to write some serial commands to the unit and thought tha tthe Camera File Generator would support this....
Thanks.
-Mike

Hi mawillia,
The latest version of the IMAQ drivers is version 4.9, and it would show up where you said, under the Software tab in NI MAX. Do you have this latest version installed? If you like, feel free to expand out your software tab and take a picture of it and post it here.
Also, you are correct that the serial commands can be set in the camera file. Here is a link to our support page for the Camera File Generator: http://sine.ni.com/psp/app/doc/p/id/psp-723/lang/en
Within it is a whole host of various KnowledgeBase articles. This one seems particularly helpful:
What framegrabber specifications do I need to know to create my camera file?: http://digital.ni.com/public.nsf/allkb/9B89C9FA43A6973A86257A62004658D5
Unfortunately, I couldn't find any articles specific to coding the serial commands for your camera in the camera file. But I recommend opening up one of the bundled camera files (I'm looking at the Basler acA2000-340kc (Base).icd ) and within that, click the Camera Control tab. The serial commands for each attribute will show up on the right side, and you can use this as an example for creating yours.
Let me know if you have any further questions!
Julian R.
Applications Engineer
National Instruments

Camera File for Pulnix TM-6710

I'm using Pulnix TM-6710 with NI PCI-1422.
I found camera file for TM-6710 from IMAQ folder.
But, I could not tell how to connect TM-6710 to PCI-1422. (There is no information at all in both NI and PULNIX).
Pls, let me know,
1. Pin connection btw. TM-6710 and PCI-1422
2. Camera file for TM-6710 lists upto "Line (7)".
What is the physical pin numbers for Line (0) thru Line (7) ?
3. The meaning of "Pattern", "Action (PG)", and "Line"
in camera file.
4. The meaning of "100, 3000" in "Line (7) { Start (High) 100, 3000 } "
Thanks in advance

Hello,
Attached is the pinout for the Pulnix TM-6710.
The Pattern, Action, and Line commands are used to control the pattern generation of the 1422 and should be transparent to the user. The NI-IMAQ driver level software uses these commands.
The numbers you are referencing in question four are used to set a minimum period for the overall pattern generation cycle and should also be transparent to the user.
Regards,
Andy Bell
Applications Engineer
National Instruments
Attachments:
Pulnix_TM-6710_pinout.doc ‏72 KB

DNG Converter-does it automatically recognize camera files?

If I have multiple Sony cameras, all with .ARW extension, does DNG converter automatically recognize the different cameras, or do i have to manually segregate from the different cameras and convert only one camera's files at a time?
One more question: why doesn't DNG converter have its own community?

The exact camera model is stored in the Raw file headers and will be automatically detected. DNG converter is the same as Camera Raw, so any questions can be directed there.
Mylenium

Media cache files: Premiere Elements 9 with SSD

Hello you fine Adobe people.
I apologize if this has been asked before, if so please could somebody direct me to an answer?
I have Premiere Elements 9 on Windows 7. My issue is pretty simple: my shiny new SSD is getting full of temp files from the "C:\Users\XXX\AppData\Roaming\Adobe\Common\Media Cache Files" location every time I work on a project. I have set all other cache items I can see in "Preferences" to my mechanical disk, but I am alarmed to see this folder filling up with huge files on my SSD. Aside from the unneccessary reads and writes, it will be filled up in no time. It seems in Premiere Pro you can direct this folder to an external drive, but I cannot find this option in Premiere Elements.
Please tell me there is a way to move the media cache files directory to another drive than C:\ ?
Thank you in advance
A Craven

alistair78
The answer is that you need Premiere Elements answers for Premiere Elements questions.
The conformed audio files (cfa and pek) are stored in the Media Cache Files Folder. By default, that folder is found in Windows 7, 8, or 8.1 64 bit.
Libraries/Documents/Adobe/Premiere Elements/10 (if 10 is your version). You set the save location for the Media Cache Files Folder in Premiere Elements Editor workspace Edit Menu/Preferences/Scratch Disks and the "Media Cache" category.
The conformed video files (mcdb) are can be accessed via the Premiere Elements Editor workspace Edit Menu/Preferences/Media and its Media Cache Database area. There you will find a Clean up to clear them and set limits. The actual files (which have a .mcdb file extension) can be found via the path shown in that area. This appears to be an unchangeable location.
Preview files from rendering of Timeline content to get the best possible preview at play back of the Timeline content in the Edit area monitor are stored in the Adobe Premiere Elements Previews File Folder. By default, that folder is found in Windows 7, 8, or 8.1 64 bit Libaries/Documents/Adobe/Premiere Elements/10 (if 10 is your version). You set that save location for the Adobe Premiere Elements Elements Previews File Folder in Premiere Elements Editor workspace Edit Menu/Preferences/Scratch Disks and the Video Previews category.
Please let us know if you are now clear about Premiere Elements and how it relates to Media Cache et al.
Please ask if any further questions on this or need clarification.
ATR

Gray file with a question mark

I have macbook pro and it starts up fine but after about 30 minutes I hear a clicking sound and it freezes then a gray file with a question mark shows up. How can I fix this?

You probably need a new hard drive. Your computer can't find a boot disk at startup and you're hearing a 'clicking' sound. Not good at all. You should backup immediately, using two schemes and two hard drives, at least, and then run Disk Utility from Disc 1 that came with your MacBook Pro. First Verify the disk and then, if needed, Repair the disk.
But before you do anything - make those backups. See -> Most commonly used backup methods.
Good luck,
Clinton

Camera File & Premiere Compatibility Question

Similar Messages

Maybe you are looking for