Camera fire button in the screen ?

Since I updates to 5.1 yesterday the camera app appearance on my iPad2 changed.
The fire button is not longer in the menu but in the screen next to the front camera.
This is very difficult to take a picture with the face camera.
How to change this back as it was before ?
Am I so dumm to not find this ?
Txs

It works in both landscape and portrait mode. I have used it and have not found it to be too arduous to touch a button with my thumb. Right handed or left handed, if you hold it like a book it will be easy to access the shutter button. You can still use the volume up button to take a picture.

Similar Messages

  • Hi i had my ipad mini on the windowsill and the touch screen is not working or the button on the screen and the screen is coming away is there anything i can do

    hi i had my ipad mini on the windowsill and the touch screen is not working or the button on the screen and the screen is coming away is there anything i can do will apple take it back

    pvonk wrote:
    Apple does not replace or take back devices that are damaged.
    Depends on the damage. The battery came loose in my iPhone. When Apple opened the phone to redo the glue they discovered the speakers were also loose. Apple replaced the phone.
    If the glue was properly bonded or had some other flaw Apple will replace the device if the device is still under warranty.

  • My iPad just died. The gear symbol came up and then the screen went blank (turned off). It was fully charged so that wan't the issue.

    My iPad just died. The gear symbol came up and then the screen went blank (turned off). It was fully charged so that wan't the issue.

    That is indicating that the device has gone into recovery mode. Press just the Power button until the red Power Off slider appears and slide to turn it off. Then power it back up to see if it has exited Recovery Mode. If it has, then you should be good to go.
    If it has not, then the issue you had that caused the iPad to turn off was one that put your device into Recovery mode requiring that you go through the recovery process (i.e., the reset did not process since the issue required a recovery to resolve). Here is a link that explains what you need to do to get out of Recovery Mode in that case:
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    This article tell you how to restore your device using a backup:
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
    Post back with any questions!
    Cheers,
    GB

  • LG Optimus Zone. is there anyway to take the carama button off the screen and use one of the physical buttons on the phone to take pictures??

    Duplicate discussion - please see:
    LG Optimus Zone. is there anyway to take the carama button off the screen and use one of the physical buttons on the pho…
    Message was edited by: Admin Moderator

        Hello jr1984
    Awesome question. Unfortunately there isn't a way to reassign the buttons. There may be a 3rd party application for the camera that would have a  different option.
    JoeL_VZW
    Follow us on Twitter @VZWSupport

  • HT201412 My iPhone will not respond even once it is hooked to iTunes nor will it respond when I hit the power (reset) button. The screen mentions that the system is checking for "borrowed blocks" (small writing in the top right corner).

    My iPhone will not respond even once it is hooked to iTunes nor will it respond when I hit the power (reset) button. The screen mentions that the system is checking for "borrowed blocks" (small writing in the top right corner).

    Are you using the charger and cable that came with the phone?
    Are you using an unauthorized third party charger?

  • TS3694 Why does my ipod keeps powering off, and when I turned if on, I have to press down the power button and the screen button at the same time ???

    Why does my ipod keeps powering off, when I have to turn it on ... I have to press on the power button and the screen button at the same time ??? over and over again. I just got this in December 2011 as a gift.

    I am having similar 'freezing' problems with many programs (Mail, Safari, iTunes, etc.). I have done a clean install of Lion instead of an upgrade when it came out. Perhaps something went wrong with my install? I'm thinking about wiping and reinstalling.

  • WAS UPDATING SPFTWARE ON MY IPHONE BUT ERROR 56 CAME UP WHEN I TRIED TO RESTORE ERROR 3024 CAME UP NOW ON THE SCREEN IS A SYMBOL OF THE CBLE AND ITUNES CAN NOT RESET IT CAN ANYONE HELP??

    I WAS UPDATING SPFTWARE ON MY IPHONE BUT ERROR 56 CAME UP WHEN I TRIED TO RESTORE ERROR 3024 CAME UP NOW ON THE SCREEN IS A SYMBOL OF THE CBLE AND ITUNES CAN NOT RESET IT CAN ANYONE HELP??

    You'll have to put your iPhone in Recovery Mode.
    Recovery mode
    If you've never synced your device with iTunes, or haven't set up Find My iPhone, you'll need to put your device in recovery mode. Then you'll restore your device as new or from a backup.
    This will erase the device and its passcode.
    Disconnect all cables from your device.
    Hold down the Sleep/Wake button, then "slide to power off" to turn off your device.
    Press and hold the Home button and plug the device into your computer. If your device doesn't turn on automatically, turn it on. Don't release the Home button.
    Continue holding the Home button until you see the Connect to iTunes screen.
    If iTunes doesn't open automatically, open it. iTunes will alert you that it has detected a device in recovery mode.
    Click OK. Then restore the device.
    If your device doesn't go into recovery mode, try steps 1–4 again.

  • I tried to soft reset my ipod touch with the top button and the screen button.  it turned off and went to the blue screen with the apple.  now it won't do anything-it has stayed on that scren for 4 hours now.  does anyone know how i can fix this?

    i tried to soft reset my ipod touch with the top button and the screen button.  it turned off and then went to the blue screen with the apple like it should.  however, it now just stays on that screen.  it has a sort of clock looking thing at the bottom of the apple that does not move either.  it has stayed on this screen for over 4 hours.  i also can not hard reset it in itunes.  i am not really goood at this sort of thing.  does anyone have this problem or a possible solution?  thanks

    See Here for
    Frozen or unresponsive iPod touch
    The Basic Troubleshooting Steps are:
    Restart..  Reset..  Restore...
    Try this First... You will Not Lose Any Data...
    Turn the iPod Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... (But can take Longer...)
    Release the Buttons...
    Turn the iPod On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • When I went to turn the desktop on, the start up sound came on.  Then the screen was white with an icon flashing. The icon is a file folder with a question mark on it.  I cannot get it to fully turn on.  HELP

    When I went to turn the desktop on, the start up sound came on.  Then the screen was white with an icon flashing. The icon is a file folder with a question mark on it.  I cannot get it to fully turn on.  HELP

    Run a disk repair tool on the hard disk or install a new OS.
    (59898)

  • Reader XI has the print button off the screen when on 800x600 resolution

    Reader XI has the print button off the screen when on 800x600 resolution as well, how to fix without changing resolution?  A user needs the resolution set to that for her eyes.
    I see that this was an issue in Reader X and update 10.1.3 resolved it.  What was the fix?

    The scrollbar appears and works but unfortunately the dialog size is still too big therefore the print button ends up being hidden by the windows taskbar. Could you please make sure that the print dialog size is calculated against the work area (desktop size minus the taskbar, there's a win32 API to get that) rather than the whole desktop to fix the issue?
    That would also fix another issue: when the taskbar is sized higher than usual whatever the resolution you have it could still end up covering the print buttons but if you calculate against the work area rather than the desktop area that issue would be fixed as well.
    Please don't leave it unfixed because even if the requirements say 1024x768 if you have higher DPI settings or have a taskbar with a non-default size the print button could easily become unreacheable.

  • How to print the Module pool screen using a push button in the screen

    Hi Every one,
                         i have developed a module program , which have a selection screen and it display the output in a structured way.
    output includes boxes, texts etc...
    my problem is :---
    How to print the Module pool screen using a push button in the screen.

    When the "Print" button is pressed:
    leave to list-processing and return to screen 100.  "(current screen)
    Call a transaction that runs your print program.
    Rob

  • HT201263 None of these answers help my problem.  My ipad will not leave the Apple logo.  I hold both buttons and the screen goes black, then the apple logo immediately pops back up.  I can't do anything because the apple logo just keeps popping back on.

    I haven't been able to find any answers that solve my problem.  My Ipad will not leave the Apple logo.  I hold both buttons and the screen goes black and then the Apple logo immediately pops back up.  I can't get the red slider screen at all.  No matter how many times I hold down both buttons the screen goes black and then the Apple logo pops right back on.

    Before you do anything else, try charging via a wall outlet for a while, since its off. Then try turning it back on.
    When you put the device into recovery mode it allows you to restore the device when no other options work. You do risk losing everything currently strored on the ipad itself. Hopefully you've performed regular backups either via itunes, icloud or both. Evern if you have synced content to either of those, you may not lose everything. All previous purchases have been saved in the itunes and app stores, so you can dowload them again.
    while the ipad is off, press and hold the home button and plug the usb cord into the ipad. You should see a message pop up on the itunes window on your compoter screen that state it has discoverd an ipad in recovery mode.
    You should now be able to restore

  • Can there HOME BUTTON(the circular button under the screen)or any other button on the front of the phone flash an LED light on notifications

    pls reply and if it is 'no' then pls advice the apple company to do this in the next iPhone.

    Can the HOME BUTTON(the circular button under the screen) or any other button on the front of the phone flash an LED light on notifications

  • HT4623 I thought I was updating my IPad, i selected update and came back home to the screen frozen with the Itunes symbol and a plug in cord displayed.  I can not get it to do anything.

    I thought I was updating my IPad, i selected update and came back home to the screen frozen with the Itunes symbol and a plug in cord displayed.  I can not get it to do anything.  Any suggestions?

    Your iPad has gone into recovery mode and it needs to be restored now. The instructions are in this kb article.
    If you can't update or restore your iOS device - Support - Apple

  • Is there a way to activate facetime without pusing a button/touching the screen? Can you voice activate?

    Is there a way to activate facetime without pusing a button/touching the screen? Can you voice activate? I just bought the newest i-pad.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
    You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

Maybe you are looking for

  • Problème mise à jour en compte limité

    après mise à jour 3.6.6 en compte limité, une petite fenêtre apparait au lancement de firefox m'indiquant que la mise à jour ne peut être effectuée. Comment m'en débarasser ? == This happened == Every time Firefox opened

  • Initial ABAP load is giving 2 different types of errors

    Hi, I have ran the initial load job after successfull completion of read help and initial provisioning jobs, however the initial load job gave some errors as follows. Pass: WriteABAPUsers Error: runFunctionsInString($FUNCTION.sap_convertABAPLangToISO

  • Messages in Mavericks has no Buddy List?

    Can anyone who updated to Mavericks check to see if you have a Buddy List window in your Messages app (fka iChat)? I don't, nor is there an option for Buddies List window under its Window menu, as normal. The only window that opens is the Messages wi

  • Windows 64-bit Management Agent

    I am looking for the 10.2.0.3 64-bit Oracle Management (Intelligent) Agent for Windows 2003 64-bit Server (AMD64 and EM64T architecture), if it exists that is. I tried installing the 10.2.X 64-bit GC_Agent from: http://www.oracle.com/technology/softw

  • How can I open individual chat windows in Skype v7...

    Hi, I just installed Skype v7 and I can't seem to find a way to open individual chat windows with friends like I could do in previous versions of Skype. Howe can I do this in Skype v7? Thank you! Solved! Go to Solution.