Camera Flash after recent update not working

After I did the most recent update to my phone my camera flash will not work. Has anyone else had the problem and does anyone know how i can fix this. I pulled the battery but that did not help.
Cortina B.

cbarney4 wrote:
After I did the most recent update to my phone my camera flash will not work. Has anyone else had the problem and does anyone know how i can fix this. I pulled the battery but that did not help.
Hello cbarney4,
Please reload your OS. Read this article.
How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop Software fo...
If still persists, contact your phone provider and needs to be repaired.
Thanks.
Good luck!
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

Similar Messages

Camera flash of iphone 4s not working

Camera flash of iphone is not working can not take a picture with flash??
Please suggest a solution.

If you bring up the shortcut bar from the button of the screen by swiping upwards, can you switch the torch function on and off?
Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again?
You will not lose data by resetting.
Did you make sure that the flash is activated in the camera app? Did you try to switch it off, take a photo and switch it back on again?
To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the camera. If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
Use iTunes to restore your iOS device to factory settings - Apple Support
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support

DvD Studio Pro recently updated, not working properly

Sometime it seems it just doesn't pay to update software.
I Recently updated my OS to Tiger and along with it I updated to the latest FCP and DVD Studio pro.
Now in DVD Studio Pro it will not properly read existing projects and when I build a project from scratch it "unexpectedly quits" just when I get going.
Any one else have this problem?

I went thru this recently, after weeks of calling Applecare, trying everything, the solution finally was to completely de-Install DVD Studio (detailed instructions are on Apple support somewheres) and Final Cut (plus all the smaller apps) BOTH. Then re-install everything, appartently there is some shared libraries or something that get corrupt, Applecare was useless btw, (except to point me towards the de-installation docs)... I know it sounds like alot of hassle, but it worked for me! Good Luck!

Camera Raw 6.7 Update not working

I have photoshop CS5 and need to edit camera raw images. I downloaded and installed the 6.7 camera raw plug in update, but it's still not working! HELP!

what version of cr is shown in ps (help>about plugin>camera raw)?

Resizing of images after FCP update not working. When I try to resize, It resizes a blank transparent image.

I am having trouble resizing images after I installed the FCP update. When I press the transform button, and then click on teh image, I go to the little blue dots on the side of the image that usually resize the image, and when I drag them out, instead of the image resizing, a black trasparent rectangle the same size as the photo expands outward to my desired size. This has happened to me before the update when trying to resize text, but the problem usually fixed itself once I clicked again on the text line in the editing section.
Any ideas?

Hi Russ,
It doesn't work that way either, however it's okay because I solved the problem. Turns out I had to select 'add keyframe' on either the 'crop' or 'distort' tabs and it fixes itself. No idea why but the problem is solved! Thanks for your help anyhow.

Recent update not working

i did "pacman -Syu" after synching the repos, it says
libxfce4util conflicts wth libxfce4util-svn. Remove libxfce4util-svn? [Y/n] n
error: package conflicts detected
I have xfce4-svn NOT xfce4. So, I shall not remove libxfce4util-svn, right? Any answers.

I accepted the changes suggested by pacman, i.e., libxfce4util-svn replaced by libxfce4util and exo-svn removed by exo. Here is what h0appened:
[shantanu@bluehead ~]$ sudo pacman -Syu Password:
:: Synchronizing package databases...
:: current is up to date
extra [################] 100% 275K 5.2K/s 00:00:52
unstable [################] 100% 13K 3.6K/s 00:00:03
:: community is up to date
:: libxfce4util conflicts with libxfce4util-svn. Remove libxfce4util-svn? [Y/n] y
:: exo conflicts with exo-svn. Remove exo-svn? [Y/n] y
Remove: libxfce4util-svn exo-svn
Targets: kde-common-3.5.6-1 arts-1.5.6-1 atk-1.13.2-1 faad2-2.5-2 gail-1.10.1-2
glib2-2.12.9-1 gnome-icon-theme-2.17.5-1 gnome-mime-data-2.4.3-1
gnucash-2.0.4-4 grub-0.97-7 initscripts-0.8-5 kdelibs-3.5.6-1
kernel26ck-2.6.19.2.ck2-1 lcms-1.16-1 libgtop-2.14.6-1 libidn-0.6.10-1
libldap-2.3.33-1 libxaw-1.0.3-1 libxml2-2.6.27-1 libxslt-1.1.20-1
mkinitcpio-0.5.13-1 orbit2-2.14.5-1 perl-xml-simple-2.16-1 udev-104-2
libxfce4util-4.4.0-1 exo-0.3.2-1 xarchiver-0.4.6-2
xf86-video-i810-1.7.4-1 xorg-fonts-encodings-1.0.2-1
Total Package Size: 61.1 MB
Proceed with upgrade? [Y/n] y
:: Retrieving packages from extra...
gail-1.10.1-2 [################] 100% 279K 4.5K/s 00:01:01
gnome-mime-data-2.4.3-1 [################] 100% 704K 6.9K/s 00:01:42
^[[B orbit2-2.14.5-1 [############# ] 83% 446K 8.9K/s 00:00 orbit2-2.14.5-1 [################] 100% 537K 7.4K/s 00:01:12
libxfce4util-4.4.0-1 [################] 100% 75K 5.6K/s 00:00:13
exo-0.3.2-1 [################] 100% 830K 5.8K/s 00:02:23
xarchiver-0.4.6-2 [################] 100% 364K 6.9K/s 00:00:52
:: Retrieving packages from current...
atk-1.13.2-1 [################] 100% 212K 6.2K/s 00:00:34
faad2-2.5-2 [################] 100% 361K 4.2K/s 00:01:26
grub-0.97-7 [################] 100% 220K 5.6K/s 00:00:39
libldap-2.3.33-1 [################] 100% 585K 7.0K/s 00:01:24
mkinitcpio-0.5.13-1 [################] 100% 12K 3.7K/s 00:00:03
:: Retrieving packages from community...
gnucash-2.0.4-4 [################] 100% 5144K 7.4K/s 00:03:07
checking package integrity... done.
error: this will break the following dependencies:
libxfce4util-svn: is required by libxfcegui4-svn
libxfce4util-svn: is required by libxfce4mcs-svn
libxfce4util-svn: is required by thunar-svn
libxfce4util-svn: is required by xfce4-notes-plugin-svn
libxfce4util-svn: is required by xfce4-mount-plugin-svn
exo-svn: is required by thunar-svn
exo-svn: is required by xfce4-notes-plugin-svn
[shantanu@bluehead ~]$
Either way things are not being updated.....

Swipe between pages after mavericks update not working?

After the latest mavericks update i cant swipe to go forward/ backward on google chrome or safari?
yes i have the option selected on system preferences>trackpad>swipe between pages.
yes i have uninstalled/reinstalled chrome AND safari.
The browser page moves when i slide to fingers left/right... but the little black highlighted arrow doesnt appear anymore?. and it doesnt go back to previous page.

There are reports that this problem can be solved by simply restarting, or by resetting the PRAM.

My imessage is not Working after recent update

My daughters iMessage & FaceTime no longer work after recent update, can anybody help please?

It's mostly a server issue because millions of users are trying to do the same. Apple's servers get bogged down. Try waiting a bit - a day - before trying again. You can also check out this for other things to try.

HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Does anyone know if apple is working on a solution to fix the wifi drama ( greyed/dimmed out)hundred of ppl have after recent updates?

After recent updates hundred of ppl can not connect to wifi anymore( incl myself)
Really annoying and all kinds of ideas how to fix it did not work out for me
I am out of warranty for 1mth and the apple shop did not even make a bit of afford to help
I am wondering if apple is working on a solution to fix this problem at all? Maybe with the next update?

I am aware of that !I just wonder if anyone has any news about this dramas-I actually hope someone says that apple is try to work on it!
No way they can leave all this ppl out there with this problem without doing anything about it

Flash Player crashes after recent update to Firefox 32

After recent update to Firefox 32, Flash player crashes frequently whenever i open any flash video.
I have latest Flash player installed (14).
I tried to uninstall Flash player and installed it again, also tried to instal flash player 15 beta and also tried to instal older flash player 13 but all in vain and problem is same.
Update:
i have noticed that this problem occurs in Firefox only while lash Player works fine in Google Chrome..
Please help me to fix this problem.
Screenshot of the Error
http://imgur.com/fekGD5v

@FredMcD I have latest Flash player installed

So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone won't stay on unless connected to mains... Cannot receive any signal "searching" constantly. HELP

So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone shut down and now won't stay on unless connected to mains... Claims its at 100% battery but thats impossible as it was at 30% before it shut down randomly.
Cannot receive any signal "searching" constantly.
Turns off as soon as removed from usb ... wont stay on connected to laptop!
HELP!

The iPhone includes a one year warranty. If an Apple store is not nearby, you can call AppleCare and handle an exchange under warranty over the phone. The exchange will be shipped to your door - someone must sign for the delivery so if no one will be at home, have it delivered where you work. You use the same box to return the existing iPhone back to Apple. Return shipping label and tape to reveal the box incuded - call the carrier with number incuded when the box is ready to be picked up. AppleCare will request a credit card in the event the existing iPhone is not returned within 10 days after the exchange under warranty is received.
Hardware can fail - it happens, which is why there is a one year warranty.

You Tube not playing video on Firefox with Adobe Flash after latest update

You Tube and other sites are not playing video on Firefox with Adobe Flash after latest update for both. Adobe Flash is working on other sites but not You tube and those sites that may have embedded You Tube videos, I'm not sure.
Adobe Flash does not crash and no error message is showing. All that shows is a dark screen for the Flash video. Right clicking the screen shows only a non-clickable 'Movie not loaded' and the clickable link to the Adobe home page.
I have spent an hour trying things as suggested for past problems similar to this but none have helped.
I have sent sad face letting you know what I think of the latest update because of this which says pretty much the same thing as I have said here.
I have no further info but if I had some input and queries form you I might be able to provide more.

I'm not sure how to remove the 12.xxx version,. I don't understand why it is there, usually updates over wirte the old one as far as I know. I don't know where to find it.
pref .js deleted.
I could not find a user.js
I disabled hardware acceleration on one of them, not sure which and I don't remember how I did it but think it must have been on the flash.
No idea what protected mode is
no new profile, I've never done this.
Ok, did what you have said as much as I could. I have been fidgeting with things now for a couple hours. After doing a CCleaner and Registry cleanse, turning off and restarting the computer, the videos are now p-laying.
I would still like to know how to find and get rid of the duplicate Flash plug in though if you would't mind.
Thanks for the help.

After recent updates from Apple, Mail will not open.

After recent updates from Apple the mail icon on the bar will not open. Only way to access mailis through Google, rather than the dock.

These fixes have helped others, depending on the situation.
Have an up-to-date Time Machine or other backup before attempting any major software updates or rebuilds.
For more about backups:
Time Machine Basics: http://support.apple.com/kb/ht1427
Most commonly used backup methods:
https://discussions.apple.com/docs/DOC-3045
Methodology to protect your data. Backups vs. Archives. Long-term data protection:
https://discussions.apple.com/docs/DOC-6031
A general repair to fix odd behaviors in Mail is Mailbox > Rebuild.
Try booting in Safe Mode.
          Boot and when you hear the bong hold down the Shift key.
          It will boot slowly. Be patient.
          Login the the user account.
          Restart.
Another fix:
Shut down Mail.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Copy and paste the following
~/Library/Mail/V2/MailData/
Click Go.
Move all "Envelope" files to your desktop.
Restart Mail and let it convert/reindex your mailboxes.
If this worked, Trash the Envelope files file that are on your desktop,
if not shut down Mail and put them back.
Another fix:
Shut down Mail.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Copy and paste the following:
~/Library/Containers/com.apple.mail/Data/Library/Caches/com.apple.mail/Cache.db
Click Go.
Move the Cache.db file to the Trash.
Restart your Mac and try Mail.
Another fix:
Open the Finder. From the Finder menu bar click Go > Go to Folder
Copy and paste the following
~/Library/Mail/V2/MailData/
Click Go.
Move all the Accounts.plist to your desktop.
Restart Mail.
If this worked, Trash the Accounts.plist file that is on your desktop,
If not shut down Mail and put it back.
You can try restoring mail from a Time Machine backup.
Hold down the Option key and in the Finder Go > Library
Enter Time Machine.
Select a date and time from when Mail was working.
Restore Mail.

Firefox loads, but wont load any web pages. tabs say "untitled". page is blank below. uninstaled and reinstaled no change. problem came after recent update. any help?

firefox opens, but wont load any web pages. tabs say "untitled". page is blank below. uninstaled and reinstaled- no change. problem came after recent update. any help?
ps. IE works as usual

Problem solved from prior post. Firefox had become blocked somehow by McAfee firewall. Set to full access. Now works perfectly.

Camera Flash after recent update not working

Similar Messages

Maybe you are looking for