Camera flash and Flashlight wont work. Reboot doesn't help.

Camera flash and Flashlight will not work. Reboot and battery pull were both tried..as was force stop and clearing data.. no help. Couldn't find any other ideas on Google... Any suggestions?

Do you use the hotspot?  If active, the flash will not work

Similar Messages

  • Why did my camera flash and flashlight quit working on iPod 5 I did a complete restore and still nothing only had for a week can't believe it would be broken already

    Why did my camera flash and flashlight quit working on iPod 5 I did a complete restore just to see and still nothing have only had for a week so I can't believe it would be broken already any ideas

    If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • E6 Camera flash and flashlight only blinks once

    I have the Nokia E6.00, Symbian Belle for 18 months.  Today I tried to take a photo with the flash, but the flash just blinks once and illuminates nothing.  When testing the flashlight, it too, when turned on, just blinks once and goes out. My settings seem to be fine.  Does anyone have a fix for this problem?  Thanks. 
    Solved!
    Go to Solution.

    You would probably have to exclude any possible software corruption first by backing up device via Nokia Suite and reset device by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user). Failing this you could use option to re-install exisiting device software within Nokia Suite. At this point a visit to Nokia Care facility would beckon unfortunately.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Camera flash and flash light not working

    Help my camer flash and flashlight stopped working any suggestions

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
    If that doesn't help Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • I've installed CS6 and web Premium on a Mac running 10.9.5, and Dreamweaver,Flash and Illustrator wont launch.  All other components work normally.  In Activity monitor it says Adobe switchboard failed to respond.  Can anyone help solve this issue?

    I've installed CS6 and web Premium on a Mac running 10.9.5, and Dreamweaver,Flash and Illustrator wont launch.  All other components work normally.  In Activity monitor it says Adobe switchboard failed to respond.  Can anyone help solve this issue?

    Release: 4/25/2012
    http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx

  • Hi everyone, I have a computer linked to my iPAD through itunes.  Then my Computer crashed and had to get  a new one. How do I get rid of the old computers link on ipad and get it on new computer bcos is wont work! (doesn't work) PLZ HELP :(

    Hi everyone, I have a computer linked to my iPAD through itunes.  Then my Computer crashed and had to get  a new one. How do I get rid of the old computers link on ipad and get it on new computer bcos is wont work! (doesn't work) PLZ HELP

    what do you mean the old computers link?
    my ipad is sycned with my computer but nowhere is there a link
    and if I connected it with a new computer and set it to sync it would replace all my data with the data from the new computer

  • Flash player 11.5 updated using ie8 and firefox wont work Youtube

    Flash player 11.5 updated using ie8 and firefox wont work Youtube
    Its impossible because after the update i researched and did alot to downgrade and it wont work.
    Only domain administrators can play youtube movies. the other simple users cannot play it they get a black screen please i need some clear professional instructions because its not working Youtube

    How do I fix Windows permission problems with Flash Player?
    http://forums.adobe.com/thread/987370

  • My camera and flashlight stopped working suddenly, only my front facing camera works. The camera app freezes and has to be ended every time. What the heck...help?

    My camera and flashlight stopped working suddenly, only my front facing camera works. The camera app freezes and has to be ended every time. What the heck...help?

    Hi JDValentine,
    If you are having issues with a camera on your iPhone, you may find the Camera troubleshooting in the following article helpful:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Regards,
    - Brenden

  • Lumia 1020 flash and LED not working

    Both flash and LED stoped working on my Lumia 1020. I tried: soft reboot, hard reboot, different camera apps (and settings) and a app to use the phone as a flash light: no result. 
    It worked untill yesterday. Camera is working fine, but without LED and flash.
    Suggestions?

    Having the same problem. Suddenly camera flash & led stopped working. Cannot afford hard reset due to much lost of data. Searched for solutions but could not found any. Also nobody seems to be interested to help out. Don't get any solution or answer by Nokia.

  • When i plug my ipod in, it shows up on desktop as a hard drive, but wont show up on itunes. All my music/videos everything has been wiped off somehow, restored it and still wont work! Please help!

    When i plug my ipod in, it shows up on desktop as a hard drive, but wont show up on itunes. All my music/videos everything has been wiped off somehow, restored it and still wont work! Please help!

    - Have you tried the troubleshooting here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    - You can try disabling the camer notification
    http://support.apple.com/kb/TS1500
    - Do you have any camera, scanner or similar software installed?  That may prevent iTunes from seeing the iPod.

  • Camera flash/video light stops working after 4.5 upgrade?

    OK, I apologize if this has been asked or covered here before, but I'm overwhelmed by irrelevant search results on all the search terms I can think of for "flash". Today when I did a routine sync the desktop manager wanted to upgrade me to 4.5, so I did. Apparently, my camera flash and video light LED now no longer works, although it was fine before the upgrade. I've tried changing settings from Automatic to On and even Off then On in both the camera and video cam apps, but no luck. I have also done a battery pull. Short of falling back to the previous OS release, which I am loathe to do since it's taken me most of the day to get everything else back to normal after the upgrade, what else can I try? -Sean

    Any feedback on this one???
    So much money spent on such a buggy device does not look like a good deal to me. Looks like Apple will loose me forever as a customer.

  • I have a seagate 1tb hard drive and a 16gb memory stick, how do i transfer avi files from one to another as the click drag and drop wont work, please help?

    i have a seagate 1tb hard drive and a 16gb memory stick, how do i transfer avi files from one to another as the click drag and drop wont work, please help?

    Greetings,
    What happens when you drag it?
    Make sure the drive you are moving the files to has enough available space to receive the file:
    Click on the movie file and go to File >  Get Info and note the "size"
    Check the drive to which you are moving the file to make sure it has enough available space: https://idisk.me.com/madisonfile-Public/web/finder-drive-available-space-and-for mat.html
    Also note the format of the drive you are copying too.  If it is not Mac OS Extended or FAT (not recommended unless you are taking it to a windows computer) then that may be the issue.
    Hope that helps.

  • I cant get the font to work on a picture in Photoshop, I have watched at least 12 how to videos and it wont work, Help

    I cant get the font to work on a picture in Photoshop, I have watched at least 12 how to videos and it wont work, Help

    Could you capture your screen and post it. Have the layers panel open and any layers that are collapsed, expanded. We will need to see the entire screen, as some information in the tab is important as well.

  • I just bought an android phone and the previous owner of the number had an iphone and imessage wont work, how do I fix that?

    I just bought an android phone and the previous owner of the number had an iphone and imessage wont work, how do I fix that?
    I recently bought a Samsung Galaxy S4, and my wife has an iphone. We found out that imessage wont come through from her. After we went to the AT&T helpdesk they said that she could turn off imessage on her phone and that I would get texts on my S4. But then so would everyone else who has an iphone. That  won't work for everyone in my company that has an iphone. So what I am wondering is- since I recently got this phone, should I get a new number? Or should I contact ATT or contact Apple to try and get this number de-activated? I'm thinking I'll never get into the icloud account that this number is attached to, but maybe someone has some advice on that?
    I just sincerely want imessage to work on this phone and I'm willing to take the steps to do that.
    Please help

    Either one of the two should work - getting new number from carrier or contacting Apple to revoke phone number from imessage system.
    That is if your problem is described correctly.

  • I have windows 7 and EasyLink wont work neither will 192.168.1.1

    I have windows 7 and EasyLink wont work. Now I tried the 192.168.1.1 and even that wont work! I have a WRT54GS and I know it works because when I usee the two laptops connected to it, it works perfectly except when too many users get on my wifi connection then it overloads

    I'd suggest trying a factory reset, that should clear any password that was set and forgotten, as well as any settings that are preventing you from talking to it (like the router address having been set to something other than 192.168.1.1).
    There's usually a recessed reset button on the back that is accessed via an "unrolled" paperclip.  Just press that button and count to about 30, and then wait until the router comes up again and try the 192.168.1.1 address.
    If you have a cable modem, then I'd suggest that you write down the MAC address of the primary computer that was used to configure the router, and then try changing the MAC address on the router to that when you get back in touch with it (via the 192.168.1.1 web GUI).  The factory reset may change the router back to it's original MAC address, which may prevent your cable modem from being happy.

Maybe you are looking for