Camera flash light issue

I have purchased Xperia Z1 in Feburary 2014 and having flash light issue in Photos. If i click without flash then image comes fine but if i click with flash then at the bottom of Image(flash side) there is a extra light comes which is flash light. And that flash look more ugly if i click in low light enviroment. I used all of settings (Auto, Daylight, Night Scene). In all setting if i click in low light there is extra flash comes in Image.
Note : My Xperia is full update using sony update.

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I suggest that you have your phone examined by a service center. Please contact your local Xperia support team for more information:
http://www.sonymobile.com/global-en/support/contact-us/
What are your thoughts about this forum? Let us know by doing this short survey.

Similar Messages

  • Nokia C5 flash light issue

    Hi, First i set the flash light off to capture images in daylight.It worked fine.I exited the camera then and reopened it.Now i tried to take a picture using camera and flash light was on now. Why the camera is not able to remember its previous flash light mode....

    I love my C5 .
    My phone does not have flash light issue .
    I brought it from US directly to my home town .
    And this was only possible with the help of http://www.viaddress.com) The Global Leader in Package Forwarding.
    This company is very cheap and relieble too .
    I really recommend you all for shopping from US
    Thanks
    Attachments:
    donkey.jpg ‏33 KB

  • My 4s camera flash light wont turn off and camera is not working

    my 4s camera flash light wont turn off and camera is not working

    Hello there, Shantae2231.
    You may just want to try resetting your phone per the instructions in this Knowledge Base article (There is no data loss by performing this step):
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Incoming call: camera flash light blinking

    Hi,
    After i completed "Reset All Settings" on my iPhone 4S (iOS 5.0.1), i then always get camera flash light blinking every time i receive the incoming call. I want to turn this off by trying Setting --> General --> Accessibility --> LED Flash for Alerts (turn off), however, it does not work for me. i still get the LED flash blinking everytime i get the incoming call and this is very annoying.
    Could you please advise how to get this fixed?
    Thank,
    sanlen

    Hi,
    I tried it but it did not work for me. Any further advise please.
    Thank,
    sanlen

  • Camera flash light stayed on

    Had my nokia lumia 1020 4 days.After last charge the flash light stayed on,even when turned off.Got extremely warm.Then shut down.Cannot turn on now.Any one else had this problem?

    Hi, Ernie5. Welcome to the Nokia Support Discussions! This seems to be an isolate case. Have you tried to press and hold the volume down and power keys? You can also try to charge the phone to make sure that it has enough battery left on it. Keep us posted on the outcome. Thanks!

  • Camera flash lights up on text

    Incoming texts set off the camera flash?  Any way to turn this off?

    Settings > General > Accessibility > LED Flash for Alerts > Off
    See p. 140 of the User Guide.

  • Camera flash light switches off my blackberry 9900

    Whenever I want to snap with the flash of my blackberry 9900 the fones goes off..why

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Led camera flash light permanantl​y on on a curve 3960

    Anyone with this problem how do I turn it off

    Have you removed the battery to reboot the phone?
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • HT201401 Camera flash issue

    Hi
    Recently my 4S Camera flash light stays on when powering or using the phone. Most of the time it is in 'dim' mode but sometime remains on full flash...drains the battery really quick.
    Have reset everthing but still the same.....any simular issues reported?.....thanks in advance.

    If resetting by holding the sleep and home button for 10sec did not work, try to set it up as new device without using the latest backup, in case it contains corrupt files.
    How to back up your data and set up as a new device
    If the flash works as expected after that, restore from the backup.

  • My iphone 4s get wet in water yesterday and now back flash light get stuck and camera also will not open what happen to it ? will you please help me ?

    my iphone get wet in water yesterday and back camera flash light get stucked, how can i recover it ? please help me ?

    What happened is it got wet.  Water and electronics don't go well together.  You need to switch it off and bury it in bag of dry rice for a week at least.  This may or may not work - but continuing to try to use it in its current state will kill it for sure.  You can enquire at an Apple store about out-of-warranty replacement, depending on where you are.

  • Camera Flash ON- Won't turn off

    I took kids out to the beach yesterday and had my phone in my holster and on my belt and totally forgot. It got a little wet and I took it off and put it aside. It stayed ON and I even received a call from it. When I hung up the phone after the call, the Camera Flash turned on and I am unable to turn it off. It is draining the battery.
    The phone turns on completely fine, I can check my email, send and receive emails, phone calls and can text but the camera flash light remains ON. I have tried everything and have even turned the flash OFF but it is not working.
    Has anyone else seen anything similar? I was reading up on posts and someone had a similar issue with BB Pearl and reinstalled the OS and it seemed to fix the issue.
    Please advise.
    Paul

    fnag wrote:
     Dont think the phone has had moisture exposure- strip on battery is still white... thanks
    The strip on the battery means nothing.
    There is a square white 1/4" sticker inside the device, normally if you remove the battery you will see it. That is the actual device Liquid Damage Indicator... and STILL, high humidity (not full moisture or liquid) can cause the issues you're describing. Keeping the device powered on, loading a new OS, removing and inserting the battery, can possibly only further damage the device.
    Moisture can come from laying a bathroom counter during a hot steamy bath or shower, in a gym locker, in a pair pants or shirt pocket while your sweaty during a run or workout, etc.
    IF there is a remote possibility of anything like that, remove the battery, and place the device and the battery in a bag of dry white rice for 3-4 days.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Camera Issues -- Flash light

    All the pictures I took with the flash light were covered by a white layer.  My Z1 has been updated to the most recent version.  I tried to use the auto-mode or manual mode.  I always get a white layer, like I am in the fog on all my picture.  
    Please help!  

    Well, me and my friends were testing this phone and out of 20 people 2 had this problem i was one of them
    ... we all had same model of black xperia z1.
    I managed to get to the bottom of this .... i think. First of all if u have additional case cover with too small "window" around the lens or additional protective foil the problem is getting even bigger.... foil transports more light fom flash so check if the photo is better wothout additional protective foil or case cover (im not talking about original one).
    Anyway....
    My phone has silver border around the lens and i had same problem over and over again. Sometimes when i restarted it i managed to get few pictures of god quality.........one day i just painted this silver border with thin black marker with caution and....viola.... problem dissapered... funny thing because out of 20 same models ony 2 experienced same problem ... all looked the same, dunno maybe flash is brighen on those 2 mabe some other problem ....anyway i know its not the best solution and it but it helped me. cheers

  • HP Photosmart C7280 Power issue with flashing lights

    I have seen many posts on the web regarding flashing lights and incorrect shut downs.
    http://h30434.www3.hp.com/t5/Other-printing-questions/Photosmart-C5180-Power-Up-Power-Down-Problem-L...
    I have tried everything including the "*,#" with "1,2,3" to reset the printer and I have the power cord plugged into a direct outlet, not a power strip, and nothing works.  Even if I do get the printer reset and it works, shortly later the lights will start flashing again and I see a blue screen with a power button symbol and some varying code (00729C98) - it varies each time.  It flashes after a short time even if I power down correctly - all on its own if plugged in.  Is there a defect with faulty part on the control board?  If so who do I take it to to get it fixed?  The printer is less than 2 years old.

    I recently had the same problem with an HP Photosmart C7280, the same model as yours. I eventually managed to get through to HP Technical Support, and they advised that the unit would have to be replaced. I think if you call through, you can get a refurbished model for a cheaper rate.
    Before calling technical support, I tried all the steps that have been recommended in various posts, but nothing helped. To the best of my knowledge - and I really tried to get my printer working - the unit is dead.
    (Although this is an old post, I came across it when trying to fix the same issue. So, hopefully this will help anyone else who stumbles upon this post. Some other codes my printer showed on the HP "blue screen of death" were B83FCB56, B0075110 and B02BAEC3.)
    Regards
    Tim

  • Galaxy S6 Camera flash issue

    Has anyone else experience the camera flash issue that is posted on the web? I'm experiencing it on my Black 64GB version. Never had an issue until I opened the camera app for the first time..It was at night so when I turned the camera off I kept noticing this faint light on the back. I thought it was just the brightness of the yellow of the flash because it is bright, but when I went pitch black, I can still see the faint glow of the camera flash. It will not cut off. I've turned the phone completely off and it still shows....It is definitely draining my battery and it's starting to bother me. Just curious if anyone else noticed. According to the web, samsung is aware and working on a fix for it.

    No problem...No, I was not able to resolve issue. The temporary fix is to
    wipe the phone and then not use flash on your camera or the flashlight; for
    me that defeated the purpose...I just continued to return the phone until I
    received one that doesn't have the issue...took me 2 exchanges but I think
    I've found one that doesn't have that issue.

  • Samsung Galaxy Note 3 Camera Flash and Focus Issues

    I have 2 issues with the Camera on my Note 3:
    1) The camera flash stops working on my Note 3 even when using another application like Flashlight. I need to turn off my phone and turn it back on for it to start working.
    2) The Camera takes a long time to take pictures and the pictures are often out of focus.
    Anyone else have these issues and know a solution?

        Hello Tazman4u, a working phone is super important! My apologies for the issues plagueing your device. Please test the phone in safe mode: http://vz.to/1aFxLK8 If issue persists, you will want to backup contacts, pics, and files to perform a hard reset: http://vz.to/1kpmPp0
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport 

Maybe you are looking for

  • Turn database logging on

    hello all, turn database logging on , - FRA configured, what i have to do? 1) can i go mount status and alter database in archivelog mode and then start the database? or anything else like logging vs nologging, just confused

  • SmartForm transportation From 4.6C to ECC 5.0..

    hi, we have requirement to transoport all Smarforms form 4.6 C to ECC 5.0 ..need help on that..how to initiate the process.. thanx in advance Regards, Dinesh

  • Fonts not available in IDCC2014, with Suitcase Fusion 5 or 6

    I have opened and worked a InDesign CC2014 doc. Everything is fine. The next day I attempt to open the doc again with the same fonts installed and they come up missing. I try several Macs, (different OSs), different versions of Suitcase Fusion includ

  • How to move existing project into upgraded Robohelp?

    I have multiple existing help projects in Robohelp maintained in version 7, and we are upgrading to version 10. Will I be able to open these projects in the new version without taking additional steps, or are there concerns I should be aware of? Woul

  • Jar file containing FormInstanceBase

    I am trying to initiate a process instance programatically using the approach described in section 5 of "Developing Custom Applications for LiveCycle Workflow". I am able to obtain a TaskManager object, but when I try to use its methods I get the err