Camera Flash not working after IOS7 Install

Hello. I installed iOS7 on my iPhone 4 last night. I had a Flashlight App on the phone prior to the upgrade, which now has a built in Flashlight utility. The probelm is, I cannot get the flashlight to turn on at all now. Not through either app and not even with the camera. I tried deleting the Flashlight App then restarting the phone, no change. Has anyone else ran ito this problem yet? Are there any suggestions for a fix? I already made a Genius Bar appointment for Sunday, just in case I cannot get this fixed.
Thanks

I have a resolution update for this: Delete any third party flashlight apps on your phone. Perform a backup on your phone. Restore the phone to factory settings then restore the phone from your backup. After doing that, the flashlight utility on the menu and the photo flash on my phone started working again.
I was pretty sure this was a software issue but I took the phone into an Apple store over the weekend. They did the factory reset at the store then checked the phone for hardware issues, none were found. They ordered a replacment phone for me which I will call to cancel today. When I got home and restored the phone from my backup, I discovered the LED was working again.
Hope this helps.

Similar Messages

IMessage not working after IOS7 install?

iMessage not working after IOS7 install?

Yep, it has issues. Word is that Apple is working on an update to fix it but no idea when it'll be rolled out.

IBooth camera flash not working after Mavericks v10.9.2 upgrade

I recently upgrade my laptop and I noticed that the flash in iBooth isn't working. I enabled the flash and it does flash, but the picture taken still appreas dark as if no flash was even used! Any idea how I can fix this?

I could not find any app called "iBooth." If your problem is limited only to this one app, contact its developer or see its Support or FAQ info for help. Perhaps all you need to do is add more light to the room or sit closer to your display when you make a picture?

Flash player does not work after I installed it

Flash player does not work after I installed it

I'm using Mac Osx and my browser is Safari
Date: Wed, 5 Feb 2014 00:41:29 -0800
From: [email protected]
To: [email protected]
Subject: Flash player does not work after I installed
    Re: Flash player does not work after I installed it
    created by Mike M in Installing Flash Player - View the full discussion
This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
What OS are you using?
http://mmonlinedesigns.com/images/os.png
What browser?
http://mmonlinedesigns.com/images/browsers.png
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Iphone 4 camera flash not working.

Iphone 4 camera flash not working when taking pictures but works with the flashlight app. I have ios 7. Tried factory reset. My wife has the same problem with her iphone 4 since the first month she has had it. Any suggestions?

and what have you done to try and fix the situation? Have you taken the steps recommended in the User Guide?

My built in camera is not working after upgrading to a new Skype version

my built in camera is not working after upgrading to a new Skype version

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.
If that doesnt pass,
Suggest looking here, much success has been found:
http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

My printers are not working after mavericks install. What can I do to fix - PLEASE HELP! It is my lifeline - we are a print shop!

My printers are not working after mavericks install.
The printer just PAUSE and can't be resumed.
What can I do to fix - PLEASE HELP!
It is my lifeline - we are a print shop!

Go to the printer manufacture website and download the drivers for your printer model for OS X v10.9 Mavericks.
Then open System Preferences > Printers & Scanners > Print
Select your printer on the left then click - (minus)
Then click + (plus) to add the printer.

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

My camera does not work after I restored the system, how can I use it again?

My camera does not work after I restored the system, how can I use it again?
Thank you for your help!

Did try to restore "as new device" without using the backup after that?
Did you try to reset the phone by holding the sleep and home button until the Apple logo coes back again?

Facebook birthdays not working after ios7 update

Facebook birthdays not working after ios7 update?

Did you always have the same problem or is it new? I always used to be able to get Facebook to work on wifi with no issues for months. I downloaded the new software update for Revolution, and all of a sudden it seems like they blocked the Facebook app somehow unless you're on 4G. It really sux because I can't get into my Zynga games either that are tied to FB! Wish someone at Verizon could be aware of this and fix the problem.
Also, interestingly, when I try to log into the Facebook site with the browser I am directed to an error page. The browser works fine for every other site though. Really seems like there was some kind of block instated that will no longer let you use Facebook on a wifi connection.

Camera not working after Yosemite Install 10.10.1 Macbook Pro early 2008

After installing Yosemite the camera does not work or even show up in system report. It appears not to be recognized at all by the OS. I have tried all of the suggested reset processes but no change. Any ideas?

dannfort wrote: ... OS X Yosemite (10.10.1)...
Your OS X Yosemite (10.10.1) is not the latest version.
Even if you have already updated to 10.10.2 by a different method, do the following:
• Restart Mac, repair disk permissions, then download and install OS X Yosemite 10.10.2 Combo Update.
• Repair permissions again following the restart that completes the Combo Update. Then try your camera again.
Message was edited by: EZ Jim
Mac OSX 10.10.2

Camera is not working after Lumia Cyan update WP8....

Hellooo Sir, I am Kailash Kumar from India (Uttar Pradesh). I have Nokia Lumia 620, I got this from my friend May 2014 and he bought it from Saudi Arbia and now it is out of warrently..
when I got this its front camera was not working But rear(back) works fine with flash, But after some days I Updated it to win8.1 with Preview of Devloper, and after updating my Camera has Stoped working when I click the Camera Button, within a second it comes to Home Screen..... So I Downgrade to Win8.0 OS via Nokia Software Updater and My Camera Start Working again....
Someone Suggest me to wait for official realese of Lumia Cyan with W8.1 OS and I waited for it and In August last My phone shows that a Update is Available and Now Update it again Officialy to Win8.1 with Cyan Update via Wifi, and the Same problem Again Happening My Camera Stopped working again after click the Camera Button, within a second it comes to Home Screen, I tried everything, Soft reset, Hard Reset, Uninstalling Nokia Camera App & Installing Again, Reset Camera Button.... But the problem remain Same, Stil Camera is not working.........
I go for the nearest Customer Care Service, they told me I Updated it via Wifi and they will update it with PC Charges Rupee 450/- But I didn't give my phone to Care.... After a Day I updated it Via PC from NSU 4.2.1 (I think Customer Care will do the Same) But the Problem Remaining Same Camera Stil is not working......
PLEASE HELP ME SOMEONE WITH THIS PROBLEM.. HERE ARE SOME MORE INFO OF MY LUMIA 620:-
1- FIRST IT IS OUT OF COUNTRY (SAUDI ARBIA) AND OUT OF WARRENTY...
2- OS VERSION: - 8.10.12393.890
     FIRMWARE REVISION NO. : 3058.50000.1425.0002
     HARDWARE REVISION NO. : 5.0.2.0
     RADIO SOFTWARE VERSION : 2.0.242037.8
     CHIP SOC VERSION : 82207
I WILL HIGHLY THANKFULL TO YOU.
Moderator's note: The attachments were removed as it contain the phone's IMEI. For security purposes, avoid posting any of your presonal information on public forums like this.

try hard reset and see if it works and let me know if it does. take phone off. press (green call) key, (*) key, (3) key and power button then wait for phone to come on then let go of keys.

Camera App not working after update to iOS 7.1.1 on iPhone4

Hi Guys,
I have recently downloaded iOS7.1.1 ipsw from the apple website for the correct version of my iphone4 [GSM] and updated my phone.
The camera app is now not responsing at all and i dont even see a picture in the camera app. I tried the update again and found that the problem is still evident.
Please let me know if we share the same problem and also any solution if you come across.
Regards,
Sheikh M

Updating to iOS 7.1.2 doesnt solving problem at all, even my front camera also begin not working after I did that. Everything's OK when I using rear cam, but just freeze and blurred on screen while switched to the front cam. And have to resetting to go back to rear cam. My iPhone4's camera itself, rear and front, are in good performance before. And I've tried anything such as reset, hard reset, restoring, setting up as new device, etc, without any result since then. If some people say it was about hardware issued, I thing so weird because too many same hardware problems coincident happened at the same moment. So I just only hope the Apple will listening and solving all problems wisely. Thanks b4.

Lumia 620 , Flash Not Working after Black update from "Preview For Developer"

Downloaded the app " Preview for Developers" and checked the phone updates, It showed that one update is ready to install. Now when i update the mobile (Lumia Black Update) the flashlight of camera is not working anymore. Plz suggest

For problems with the hardware I'd probably ask over here.
http://discussions.nokia.com/t5/Nokia-Lumia/bd-p/Nokia_with_Windows_Phone
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

TS1702 Certain apps will not work after ios6 install.

Certain apps will not work after ios6 update. Tiger Woods golf will run for about 5 seconds and stop. Have uninstalled/re-installed to no avail.

My husband had the same problem with some apps after I updated his iPad 2 to iOS 5. I checked the app store and there were updates for the apps to support the new software. After updating, all apps work just fine.

Camera Flash not working after IOS7 Install

Similar Messages

Maybe you are looking for