Camera flash- photo turning out all white and blurry
Every time i take a photo w the iphone 4s if the flash is on or even if the flash is set on auto it shows up all white and you can not see the photo and it's blurry. Is there a way to adjust the flas strength?
Take the case off that is reflecting the flash into the camera lens.
Similar Messages
-
I have a desktop iMac that has been running very slow lately. I turned off the power yesterday, thinking a restart may help. When I turned the power back on, the screen turned white and stayed white. Any ideas???
Welcome to Apple Communities
http://support.apple.com/kb/TS2570 -
When I take a picture in the dark and use the flash, the photo turns out pink.
Recently, when taking pictures using the flash, they turn out pink This happens whether there is light or not. Why?
You probably have a filter set for the normal camera mode but not the square.
To fix, in Photo mode, touch the filter icon (three circles) and select None for the filter. -
So randomly my ipod crashed and when i turned the ipod on again it was all white and blurred. Part of the screen is up to speed but the other half is slow. Already tried turning it completely off and restoring it on the computer
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this. -
I have just purchased an iMac 27" 2.7GHZ running OSX 10.7.4 with 4GB RAM (16 GB has been ordered). I am using Aperture 3.3.2. When I attempt to create a web page from photos the page goes white and nothing displays. Is this a RAM issue?
I have resolved the issue....turns out that, in my case, running OSX 10.8.1 with Aperture 3.3.2 was what was required! I was running Aperture 3.3.2 with OSX 10.7.x and had this issue.
I hope this helps someone else as well. -
I am trying to use photomerge compose. I open one standard jpeg image and one image that is my business logo in a png format. When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from it. It has worked in the past but I downloaded the update today and photomerge will not work correctly. Any ideas?
hedger,
How do you expect anyone to help when we don't know a darned thing about the file, abut your setup, exact version of Photoshop and your OS, machine specs, etc.?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
i updated my ipod ,but before it work completely the screen turn blue,then white and now it doesnt work even if it charge. So, what do i do? PLEASE ANSWER MY QUESTION PLEASE TELL ME WHAT TO DO so i todd what others did then i did it but it kept showing the apple sign and now turn to blue again the turn yellow now white. Apple please fix it i havent been able to be gone at all past few days because of this also tries to connect with my labtop didnt work whats up with it. for people who didnt update it wait until they fix it beleive me
it still blinking with the apple sign
-
First I was hearing a notification tone intermitantly when an email came in; it was never consistent and only started after I'd had my macbook for about 7 weeks. Today, I found the way to turn off all notifications and put the computer on permanent do not disturb in system preferences. Now I'm getting the tone sort of at random. Can anybody tell me what is going on? I have a 2014 macbook pro 15".
Yes. Reset network settings. Head to Settings -> General -> Reset and tap Reset Network Settings.
B-rock -
I have put Ipod in restore mode and about 1/2 way through download it goes back to message "disabled type in passcode" ?? I have turned off all security and tried all trouble shooting ideas, any suggestions?? besides paying $$$$ to apple tech support
What appears to be happensin is that before the actual download finishes/restore starts. the recovery mode is timing out. I would do a manual download using the instructions here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Then place the iPod in Recovery mode and restore using the instructions in the link. -
Itunes will not loads but interface is all white and does nothing.
When i try to open my itunes store, it downloads but it is all white and i still have the tool bar above along with the search and play buttons as well. It has been like this for about 5 months and i cannot figure out a solution to fix it. Someone please help
Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
I'm just formatting a second hard drive for backup purposes. I've decided I want to zero out all data to ensure that the drive maps out bad blocks, and then I'm going to create a GUID partition just in case I decide to make it a boot drive in future.
Three questions:
Why doesn't Disk Utility give you the option of Zero Out All Data and GUID partition as a 'one stop shop'?
Is there any disadvantage to having a GUID partition on a backup drive?
Are any remapped bad blocks found during the zeroing process retained after the GUID partition erase?Zeroing and GUID don't always go together. AIUI, GUID is only compulsory for a boot partition for Intel Macs; and it is recommended for volumes used by Time Machine. Otherwise, Apple Partition Map will usually be required since it can be read by both Intel and PowerPC Macs.
The disadvantage to having a GUID partition is that it won't be readable by PowerPC Macs.
Simon -
Hi, I have just tried downloading the Facebook app, but the app store has frozen. It will not let me click on anything. Shall I try turning it all off and back on again? Or is there something else I need to do.
Thanks, RebeccaReboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
-
have verizon iphone 3g; recent upgrade of operating system. suddenly calendar has wiped out all entries and am unable to add new ones.
Please define "tried to add the Image"?
OS Installer Packages do not point to "images". They point to the complete set of source files including the directory structure from the media.
Is there a specific reason you are using OS Installer packages though? In general, there is no reason to use them anymore (unless you are actually still deploying XP).
Jason | http://blog.configmgrftw.com | @jasonsandys -
the screen for my ipod touch went all white and I already tried to restarted but still doesnt work. What can i do?
Let the battery drain dead, recharge it and test. If it still does not work, restore.
Troubleshooting 101
Some topics covered
-Basic troubleshooting steps
-Hard reset instructions
-Manual restore instructions
-Hardware troubleshooting
-Preventive Maintenance
-Anti-theft & recovery tips
-Battery-saving tips
-Repair options
-Contacting Apple
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
Recently my iphone is consuming too much data, I have installed a data monitoring app and I found that - although I turned off all notifications and push email - push services is using around a 1mega/hour from cellular data (even if I am using wi-fi) !!!
cpupower frequency-info
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 800 MHz - 2.30 GHz
available frequency steps: 2.30 GHz, 2.30 GHz, 1.80 GHz, 1.60 GHz, 1.40 GHz, 1.20 GHz, 1000 MHz, 800 MHz
available cpufreq governors: conservative, powersave, ondemand, performance
current policy: frequency should be within 800 MHz and 2.30 GHz.
The governor "conservative" may decide which speed to use
within this range.
current CPU frequency is 800 MHz.
cpufreq stats: 2.30 GHz:0,02%, 2.30 GHz:0,05%, 1.80 GHz:0,05%, 1.60 GHz:0,03%, 1.40 GHz:0,01%, 1.20 GHz:0,16%, 1000 MHz:0,38%, 800 MHz:99,29% (1017)
boost state support:
Supported: yes
Active: yes
25500 MHz max turbo 4 active cores
25500 MHz max turbo 3 active cores
25500 MHz max turbo 2 active cores
25500 MHz max turbo 1 active cores
Thax
Maybe you are looking for
-
This may be a dumb question but here goes anyway. I open Garageband on my new MacBook and there are no loops in it. I click on a loop and a dialog box pops saying the selected loop is not currently installed on my computer and would i like to install
-
Lenovo C560 with Windows 8.1 (16-gb RAM) will not successfully load Windows Movie Maker
I loaded Windows Movie Maker 12 with Windows Essentials. -This is exactly the same setup I am using on a HP desktop at work with Windows 8.1, but for some reason my C560 keeps giving me a "low memory" warning and will not load a AVI clip. -Worse, a
-
Equium A100-147 - Native resolution on external LCD doesn't work
Hi, My Equium A100-147 has 1 VGA and 1 S-Video output, so I'm using the VGA output on a external LCD monitor with native resolution of 1680x1050@60hz, but the integrated Intel 945 graphics card doesnt give me the right resolution to choose for this m
-
Customize Font size and color of text
Hey guys, Sorry if this is basic, as I am new to this, and did a search but see anything, I am sometimes having a bit if tough time reading some of the fonts on the phone. I tried the black to white/white to black option under settings/general settin
-
Where is the facing pages setting in Pages 5.5?
I am trying to find the facing pages option in Pages 5.5 but no luck. Bound to be in a really obvious place but at the moment I cannot find it. Can anyone help?