Camera flashes when charged battery is inserted. Won't power up.

Battery went dead while taking photos. I charged the battery. Upon inserting, the camera flashed (weird) but wouldn't power up. Then, the battery charger showed that the battery needed charging, so I did it again. In a few minutes it appeared to be ready, so I repeated the process with the same result. I thought maybe I ruined the battery, so I bought a new one.
Same result. I would think it's a software problem, but there's nothing I can do to get this **bleep** thing to light up!
Any ideas?

Hi JimE!
We understand your frustration, and we're here to help!  To have a better understanding of your issue, please let everyone know which model Canon camera you own.  Also, please confirm with us the exact battery model, as some of our cameras have additional battery options.  That way, our Canon Forum members and our Subject Matter Experts will be able to assist you with suggestions appropriate for your model.
And here's some additional suggestions regarding the battery issue you've described:  do you have an extra battery charger?  If you plug your battery charger into a different outlet, does the same issue occur?
We hope this helps, and look forward to working with you!

Similar Messages

  • Battery light flashes when charging

    is the battery light supposed to flash when charging?
    i thought i saw somewhere that meant a bad[dead] battery?
    Thanks!!

    There is an article on Laptop Battery Life at:
    http://guides.macrumors.com/LaptopBatteryGuide
    1 Facts about your battery
    2 How long will your battery last?
    2.1 What is "full cycle"?
    2.2 Power table
    2.3 What this means
    2.3.1 Example
    2.4 What does 80% mean?
    2.4.1 Example
    2.5 300 Cycles
    3 How can I see my battery's age and condition?
    3.1 Coconut Battery
    3.2 iStat Pro
    4 Battery Calibration
    4.1 Intel notebooks

  • Why does my camera flash when I receive notifications?

    When I receive notifications my camera flashes.  Does anyone know why and/or how to resolve this?

    You probably have it set to do so.
    Have a look at the manual:
    iPhone User Guide (For iOS 5.1 Software)

  • When charging, battery indicator not moving, it is just staying red

    when charging my ipod there is a connection but after at least an hour, the battery indicator is still red but somehow it says that there is a connection. What do you think the problem is?

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod      
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • HT4528 My phone was charging and now it won't power on. Any suggestions?

    I was charging my phone last night and was at 79% before I went to bed.  This morning the screen is black.  It won't power on.  I also connected it with my laptop that has itunes and it was not found.  Has anyone had this problem?  How do you fix it?

    I found other posts that recommended holding the on/off power button and the home button at the same time until the Apple logo appears and disappears.  Then you can power the phone on.  This worked for me!

  • Droid X2 keeps shutting off, battery not dead, won't power up unless plugged in?

    Just got it off Ebay...fully charged, shuts down whenever I try to use it, and won't power on again unless I plug it in. Anyone else have this issue and know how to resolve?

    Did that and shouldn't have...now it still shuts off, and wants me to "activate" again with a phone call, except I can't because this model does not let you access the keypad! 

  • Lenovo s820 top power button area hot when charging battery

    Hi there, im new lenovo user. I found that my lenovo s820 start to hot at its powerbutton back side near camera. It is normal for this phone? any comment will be appreciate. thank you.

    same on my phone why is this happen?.. :3 make me fear, and now i cant charge at all. arrghh

  • Optical drive makes weird noise when CD/DVD is inserted, won't play

    OK so...When I put a CD or a DVD into the optical drive, it makes this weird consistant sound that, while i feel like an idiot typing it out, sounds something like: eee ooh ooh eee ooh ohh eee ooh ooh.
    It does this for a couple minutes until it responds to me pushing the eject button.
    Anyone know what this is?

    Anyone know what this is?
    I would guess a hardware failure.

  • How do I remove the battery when the battery release latch won't move?

    HPg71  laptop. Product VM114UA#ABA. Is there a service center I should know about in San Diego California?

    Look on the right side of the phone, for a sim tray, you'll need a paperclip to push into the small hole for the sim tray to open.  Or look in settings - general - about

  • Just bought MD367B/A Ipad WI-FI Cellular 32GB black so far no success ? on 'booting up' No Icons appear, after the 'APPLE symbol goes A k/b appears on the screen in a foreign language (Arabic I think?) When charging Battery I get no indication 'on screen'

    Sorry if the heading is long, but i thought I was in the letter mode, anyway but as you can see it would appear I have a problem! after watching YOUTUBE IPOD videos on my 'desktop' , it all looks pretty straight forward?  I think I managed to register using Itunes
    so 'WHAT'S UP DOC'? thanks in anticipation
    VICKY

    noelani72 wrote:
    I'd be curious to go buy an old Linksys WRT54G Wifi Router and see how the iPads work on it....but my lord, I have already spent so much time on this issue as it is.
    Message was edited by: noelani72
    Unless you get that WRT54G for free or next to free, pass on it and pick up an old apple WAP off eBay or similar site. Like you my iPad has a connectivity problem with the WRVS4400N running iOS 4.2.1, where it didn't have trouble with iOS 3.2.2 and ran fine for five months.
    My solution at the office was to spur a second router off my DSL router just for the iPad. The first was a WRT54G that had to be set to only one 802.11 protocol to keep the iPad reliably connected, but swapped it out for an old airport extreme that I kept on after testing it to be good. With a home network like you describe, I would run a subnet off the WRVS4400N just for iPad using an apple WAP (the configuration app for Windows is easy to use).
    Good luck.

  • Swollen battery, now Mac won't power up

    My battery is swelling and I had resigned myself to working tethered until I HAD to purchase a new one. Last nite, my infant grandson yanked out the power cord and now I can't power back on. I get the green light on the AC adapter, and had always assumed that I could run the computer just from that source without the battery. Am I wrong or could the sudden disconnect possibly have tripped something that now prevents me from powering back up? Any one experience similar troubles?
    Teemflmngo

    You should be able to run the MBP just from the power adaptor. You could have some directory corruption from the abrupt shutdown. See if you can boot from your install disc. If you can, navigate to Disk Utility and repair your boot disk and try again.
    Have you removed the swelling battery? You need to--otherwise it can exert pressure inside the machine and potentially cause damage.
    Here's a link that might be helpful:
    http://support.apple.com/kb/TS1365
    Good luck!

  • Black screen when battery is inserted

    Hi everyone. Suddenly my 2009 white macbook goes to black screen when the battery is inserted. From startup with the battery in place [and power cord in or out] the computer starts but goes to black screen after the grey apple logo and little grey spinning thing. If i look very closely i can see the images on the screen. If i remove the battery with the power cord in, the computer behaves normally. If i put the battery back in again it goes dark again. Therefore i can only run it using the power cord. The battery is fully charged, the computer charges the battery ok and I've tried a few different batteries. Have zapped the PRAM and reset the charging thing. I'm out of ideas folks ! Thanks

    OK so I have a 2008 white macbook and it will work just fine if i have the power cord plugged to it but with the batte out so with no battery placed in it now when I try to place in the battery my screen dimmes down to the lowest point it can so the screen looks black but if u look closely you can barly see the the windows on the screen

  • When/how to charge battery of I pad

    My i-pad power is down to 40%. Is there a preference as to when to charge battery? Also, should the power on the I pad be off or on when charging?

    Hi and welcome .....
    Fastest way to charge the iPad is to connect it to a wall outlet as USB takes a little longer. Doesn't matter whether or not the iPad is or not.
    More about charging the iPad battery here.
    http://support.apple.com/kb/HT4060
    Carolyn
    Message was edited by: Carolyn Samit

  • White screen flash when I use Preview to look at pics!

    GDay all
    About a week ago my G5 Duel started flashing a white screen (like a camera flash) when I load any jpg tiff or pdf using Preview. I minimise the photo file, then load it back to full size and I get a white flash.
    Its like someone is taking a screen dump of my screen every time I use the preview program... If I was on a PC I would think I was being hacked...
    Any ideas?
    Regards
    Tee
    Australia

    Create a new account, name it "test" and see how your apps work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
    Open System Preferences >> Accounts >> "+" make it an admin account.
    If the problem is present in the test account also, then it is systemwide. In this case try repairing this with the 10.5.2 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
    Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
    If the problem does not appear in the test account try starting in "Safe Mode" (It will take a bit more time to startup because it runs a directory check first).
    If that works go to System Preferences >> Accounts >> Login Items and remove them. Boot normally and test. If there are still problems, go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving /Users/Home)/Library/Fonts to your desktop and restarting.
    Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
    Let us know.
    -mj

  • Z2 camera flash issue

    hi there,
    i bought a z2 few days ago.
    i face some problem with my camera flash. when i take photo without flash(flash off), its cool.
    but when i take with auto flash mode, the photos isnt clear. pleae checkedout 2 attached photo.
    my mobile is uptodate. please help me to fix this problem.
    cheers
    miralamin
    withour flash:
    with flash: 

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    Do you have any cover or similar on the phones backside? In that case, try to remove it and see if you get a better photo. 
    Please also note that if you take a picture to close to an object with a blank or white surface the flash may reflect back into the camera. Do you get the same picture quality with the flash if you take a photo from a longer distance or on another object? 
    What are your thoughts about this forum? Let us know by doing this short survey.

Maybe you are looking for

  • Leaving action

    Hi Experts, Pls guide me to solve the issue related to leaving action of emp in PA40. When an employee left the company, which infotypes needs to be delimited. Is it receommanded to put the practice to enter Run payroll up to, Do not account after in

  • How to populate the new field of R/3 in BW

    Hi, There was a requirement to modify the sap screen in the R/3. For the same a new field is created which populate the data via a table in R/3. Now I have to populate the same field in BW. I am working on 3.5 Version. In R/3 I have a data source and

  • MSI K8N Neo Platanium Mobo Vista Drivers HELP

    I Installed Vista On My PC But i dont know what drivers to install for my Motherboard as the drivers are for XP...Is there any vista drivers for my Motherboard also do the USB 2.0 Drivers for this MoBo on the MSI site work on Vista.... thanks

  • More than one icon in a string

    Hello everyone, Is it possible to have more than one icon in a string? Something like:   CONCATENATE '@S_OKAY@' 'dd' '@S_OKAY@'  INTO t_text.   WRITE: 35 t_text AS ICON. I could not find any information about this possibility. Regards, Cláudio Ramos

  • How to access data from Cluster table....?

    Hi Experts, Can You plz tell How to import/read data from cluster table? Plz give me the syntaxes also.. Thanx in advance.