Camera folder help
Hi,
I accidently deleted the folder for storing my camera pictures on my media card. Now I cannot get the folder back and the option to store in the media card is gone as well. Can anyone help?
bfanatic wrote:
Hi,
I accidently deleted the folder for storing my camera pictures on my media card. Now I cannot get the folder back and the option to store in the media card is gone as well. Can anyone help?
Hi...
Backup your data on a pc with an adapter. Reformat your card and it will build the folders.
Or, you can mount the card on a PC and create the folder and see if it works.
H
Message Edited by hmeister on 10-04-2008 06:00 PM
+++++++++++++++++++++++++++++++++++++++++++++++++
If successful in helping you, please give me kudos in my post.
Please mark the post that solved it for you!
Thank you!
Best Regards
hmeister
Similar Messages
-
I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
Can anyone please help?yellowmledbetter wrote:
Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
But, here goes:
Your cameras are newer than your raw converter, so it won't understand them.
CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
I really should be in bed. -
my macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help. i've tried the command s command p command v but nothing i've tried to the safe mode then a quick restart but nothing
disk utility give me this:
Process: Disk Utility [371]
Path: /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
Identifier: com.apple.DiskUtility
Version: 11.5.2 (298.4)
Build Info: DiskUtility-2980400~60
Code Type: X86-64 (Native)
Parent Process: launchd [86]
Date/Time: 2013-11-05 03:29:41.247 -0500
OS Version: Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report: 9522 sec
Crashes Since Last Report: 29
Per-App Interval Since Last Report: 981 sec
Per-App Crashes Since Last Report: 25
Anonymous UUID: F6B8E263-76C8-4C7D-AA58-48134BF4BA78
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000020
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 libobjc.A.dylib 0x0000000100c62fbc _read_images + 312
1 libobjc.A.dylib 0x0000000100c79721 map_images_nolock + 1266
2 libobjc.A.dylib 0x0000000100c62761 map_images + 115
3 dyld 0x00007fff5fc039c5 dyld::notifyBatchPartial(dyld_image_states, bool, char const* (*)(dyld_image_states, unsigned int, dyld_image_info const*)) + 853
4 dyld 0x00007fff5fc0c849 ImageLoader::link(ImageLoader::LinkContext const&, bool, bool, ImageLoader::RPathChain const&) + 201
5 dyld 0x00007fff5fc04d54 dyld::link(ImageLoader*, bool, ImageLoader::RPathChain const&) + 118
6 dyld 0x00007fff5fc08f7c dlopen + 490
7 libSystem.B.dylib 0x0000000100a14e40 dlopen + 61
8 com.apple.CoreFoundation 0x0000000100d78ef7 _CFBundleDlfcnLoadBundle + 231
9 com.apple.CoreFoundation 0x0000000100d77e97 _CFBundleLoadExecutableAndReturnError + 1191
10 com.apple.Foundation 0x0000000101008355 _NSBundleLoadCode + 638
11 com.apple.Foundation 0x0000000101007c78 -[NSBundle loadAndReturnError:] + 742
12 com.apple.Foundation 0x000000010101960c -[NSBundle principalClass] + 38
13 com.apple.framework.DUSupport 0x0000000100082080 -[DUModuleManager(_private) findDUModules:] + 405
14 com.apple.framework.DUSupport 0x0000000100081ed9 -[DUModuleManager orderedModuleListOfModules] + 40
15 com.apple.DiskUtility 0x0000000100006082 0x100000000 + 24706
16 com.apple.DiskUtility 0x0000000100005f59 0x100000000 + 24409
17 com.apple.AppKit 0x0000000101444625 -[NSWindowController _windowDidLoad] + 538
18 com.apple.AppKit 0x00000001013e1f77 -[NSWindowController window] + 112
19 com.apple.AppKit 0x00000001015f61d9 -[NSWindowController showWindow:] + 47
20 com.apple.AppKit 0x00000001015c7c5c -[NSDocument showWindows] + 98
21 com.apple.AppKit 0x00000001015c64bb -[NSDocumentController openUntitledDocumentAndDisplay:error:] + 340
22 com.apple.AppKit 0x00000001014f7b44 -[NSDocumentController(NSInternal) _openUntitled] + 111
23 com.apple.AppKit 0x00000001014f79ab -[NSApplication _doOpenUntitled] + 257
24 com.apple.AppKit 0x00000001014f733b -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 185
25 com.apple.AppKit 0x00000001014f6fd9 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 77
26 com.apple.Foundation 0x0000000100ffd0d6 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 360
27 com.apple.Foundation 0x0000000100ffcf06 _NSAppleEventManagerGenericHandler + 114
28 com.apple.AE 0x0000000104d7332b aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned int, unsigned char*) + 162
29 com.apple.AE 0x0000000104d73224 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 32
30 com.apple.AE 0x0000000104d7312b aeProcessAppleEvent + 210
31 com.apple.HIToolbox 0x00000001028a0619 AEProcessAppleEvent + 48
32 com.apple.AppKit 0x00000001013fc095 _DPSNextEvent + 1191
33 com.apple.AppKit 0x00000001013fb801 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
34 com.apple.AppKit 0x00000001013c168f -[NSApplication run] + 395
35 com.apple.AppKit 0x00000001013ba3b0 NSApplicationMain + 364
36 com.apple.DiskUtility 0x0000000100002009 0x100000000 + 8201
37 com.apple.DiskUtility 0x0000000100001db8 0x100000000 + 7608
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0 libSystem.B.dylib 0x0000000100a27c0a kevent + 10
1 libSystem.B.dylib 0x0000000100a29add _dispatch_mgr_invoke + 154
2 libSystem.B.dylib 0x0000000100a297b4 _dispatch_queue_invoke + 185
3 libSystem.B.dylib 0x0000000100a292de _dispatch_worker_thread2 + 252
4 libSystem.B.dylib 0x0000000100a28c08 _pthread_wqthread + 353
5 libSystem.B.dylib 0x0000000100a28aa5 start_wqthread + 13
AND MORE TOO MUCH TO COPY N PASTE HELP PLEASE!!!!!Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data) -
Error message " Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!
Hi, I was able to reformat my iPod and that worked. I read it on one of the threads and I am copy pasting the method below:
I opened the "My Computer" window and right-clicked on my ipod, and then selected "Format". I select "Yes" to format since I don't have anything on the nano to delete anymore.
I then Eject my nano from the computer and did a restart while the nano is disconnected from the computer.
Once Windows finish loading I reconnect the USB to the nano(back of computer) which automatically pulls up iTune. It asked me to name the new ipod detected and created a playlist for that specific ipod name.
Pasted from <http://discussions.apple.com/thread.jspa?threadID=1050784&tstart=15>
Thanks! -
I just upgraded my operating sytem to 10.6.8, to accomadate my sons new ipod which worked fine , but on plugging in my iphone 4 , itunes doesn't rcognise my phone , just says no camera found, help please.
Try Here > http://support.apple.com/kb/ts1591
-
I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you. This is for Quicktime Player.
"The document “IMAG0026.AVI” could not be opened. A required codec isn't available."Try Perian.
http://perian.org/ -
Good morning There is a stop at the camera Please help me When you turn on the camera Shut down automatically
I'm in iraqAdobe Reader is free. It always has been.
You have obviously downloaded and installed Acrobat (30 day trial version) and the trial period has expired.
You need to uninstall Acrobat (using the Control Panel and Add/Remove Programs or Programs and Features [Vista/7])
Then run the Windows Installer Cleanup Utility http://support.microsoft.com/kb/290301
to completely remove the Acrobat installer files.
Then download Reader 9, install it, and go about reading PDFs for free.
EDIT: Please, please please.... do NOT post a phone number in the forums.
You're inviting trouble if you do.
Not everyone who reads these pages is here to help fellow Adobe product users.
Message was edited by: Mac+Win=Me -
I cannot open Photobooth. I keep getting a message that says "Photobooth cannot open because no camera is attached or the camera is in use by another application." As far as I can tell, no other application is using the camera. Help?
Run the apple hardware test.
-
Recently Image Capture stopped working. It can't find one camera and can't find the images from a different camera. Help?
Launch iPhoto. From the menu: iPhoto>Preferences>General: Select Connecting camera opens>Image Capture.
-
've tried everything and all of the sudden my macbook air will not let me use my PhotoBooth or FaceTime it says not connected to camera? help!?
iSight camera failure after OS X 10.9 Mavericks update
-
hello i accidentally synced all my photos from Iphoto and they doubled, i removed them all eventually to re-import them again, but i have no camera folder anymore and i have a folder called "From Mac" how can i turn it back to normal?
That is normal for photos synced from a computer to a phone using iTunes. Synced photos were never placed in the Camera Roll. Additionally since iOS 8 there is no Camera Roll: http://appleinsider.com/articles/14/09/19/goodbye-camera-roll-where-to-find-your -photos-in-ios-8
-
HT1462 my FaceTime says that there is no connected camera? Help Please
my FaceTime says that there is no connected camera? Help Please
If restarting Mac does not resolve your trouble, try all the relevant suggestions (including testing more than one Apple camera application in more than one user account) from Apple's How to Troubleshoot iSight support article.
(Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
If your Mac's System Information utility still does not recognize your inbuilt camera as a USB device, you most likely have a hardware problem. There are no user serviceable parts of the camera. For hardware help, contact Apple or an Apple-Authorized Service Provider for service. Unless you have a current backup, make one now. Then use the final "Troubleshooting" suggestion: "... contact Apple or an Apple-Authorized Service Provider for service."
Message was edited by: EZ Jim
Mac OSX 10.10.2 -
Ipod recognized as a camera, please help
I have seen many similar problems that people have had, let me list everything I have tried so far.
Re-installed Itunes as told to by uninstalling every part of it (didnt work)
updated my driver for my "Apple mobile device USB driver" as told here http://support.apple.com/kb/TS1538 however when I tried to reset the Ipod Touch driver the file was NOT compatable...
This problem only exists with my new computer, my old one will synce right up with my ipod with no problems. New one only has windows read it as a digital camera and Itunes not even notice it...I would really like some help, I have been searching around for the past 2 days with no success.
Also my Ipod touch is being registered as a "MTB USB device" by windows, thats the only driver it will allow me to use for it.
Message was edited by: AthorianThat's perfectly normal. My computer does tht all the time. The window's driver recognizes the camera part and the DCIM folder holding the photos and videos as a camera.
You can use it as a way to pull photos off without going through iTunes, or just close the window nad ignore it. -
Accidentally moved a folder-help
I am running Windows XP and use Adobe Photoshop Album Starter Edition 3.2 to download & view my pictures from my camera's memory card. I was trying to put some pictures on a cd (using Windows Explorer) and accidentally moved a picture folder (I'll call it Beach) into another picture folder (I'll call it Sports). The "Beach" folder shows up in the "Sports" folder but properties show that the "Beach" folder is empty. When I go to view the photos in Adobe, I see the annoying red reconnect symbol in the "Beach" folder and I cannot view the photos at all. I have read the forums and see that others have had this problem but cannot seem to find a solution. I have tried right clicking a picture in the folder and selecting "reconnect". It then searches forever and comes up with another box that says "The source file(s) you've selected annot be found at the locations stored in the catalog. They may have been moved and/or renamed. Please reconnect these catalog items to their source files." I can't reconnect the files because the "Beach" folder is empty. I didn't delete anything, but the folder is still empty. I know this is lengthy but was hoping if I gave enough info that someone would be able to help... Any suggestions?
Somehow, when you moved the Beach folder into the Sports folder, the images
seem to have been deleted. (I'm assuming here that you've opened up the
Beach folder and it's empty)
I hate to say it, but you may be out of luck. There's nothing Starter
Edition can do to help. It thinks the photos are in Beach, but they are not
there. The image that you are seeing in Starter Edition is just a low
resolution thumbnail copy that SE made when you first imported the photos.
It does not actually manage or keep the real image file. That's Windows job.
About the only thing to do at this point is use Window Search to search you
entire hard drive for the photos. Pick one of them, get the filename, and
search for it. If you find one, chances are the rest of them will be there.
Good luck
Bob -
When recording music or stage presentations with my Canon DV, I get a mechanical hum in the audio. It sounds like the camera is recording its' motor noise. Does anyone have some advice for getting rid of the hum? I have played with the audio filters but I really don't have a good grasp on their uses.
Thanks fo any help.
JoeHi(Bonjour)!
Try to isolate the frequency of the hum for your camcorder.
I found that the Hum-Filter in audio filter folder work well for me.
Sometimes, an external audio editing app like Sound Studio or Audacity can do a better job.
Michel Boissonneault
Maybe you are looking for
-
ALL WORK EMAILS COMPLETElY ERASED-NEED RESTORE EMAIL ASAP
Hello, I was trying to setup my work email on my mac when I accidently clicked REBUILD on my mac email and this completely erased all my emails. I need a restore program to help restore my emails since I work through this email and if I cant recover
-
Putting Image on a Frame Called From an Applet
I currently have an applet that opens up a JFrame when you click on a button. I am trying to figure out how I would put an image on the frame. When I try using ImageIcon image = new ImageIcon("image.jpg") I get an error when I run the applet in the w
-
Trailing Space at the end of Record
Hi, I need a blank space at end of header record when transferring data to a file on application server. Appreciate help. Code: wa_header-empty = space. " Length 4 type char wa_header-rec_type = 'ZREF'. " Length 4
-
How many photos can a stream have
Orginally I was told that a stream can only store 1000 photos or up to 30days. This is what was told to me about 2 weeks ago. yesterday I took a workshop and was told the time does not matter but the 1000 is still the case? Also is that for the strea
-
Large off site backup - where?
I have close to 1 TB of music that I backup with Time Machine. However, I'd also like to backup the music off site because it is irreplaceable. I see that dropbox has an option for $200/yr. Is that my best option? Approximately how long will it t