Camera for final cut pro

Hi
I have about £2000 UK pounds to spend on a video camera for producing footage to be edited in Final Cut pro.
What is the best type of camera to get for quality and ease of importing and editing?
Not sure between tape and hard disk etc.
Thanks

I would agree withthe poster 'G' above that it depends on what you want to do. I would certainly follow his advice.
Here's what I did and what I have no done.
I JUST bought a brand new PANASONIC AG-HVX-200 because I want :
* 4:2:2 colour space so i can get more out of the colour correction tools I have such as COLOR.app and coloritsa etc (HDV doesn' cut it for me at the moment). I would highly recommend this camera!.
• I want the 720P/25 and a 1080P/25 with a codec that was not MPEG2 (such as HDV).SO I now have DVCPROHD to use and in a nutshell it is marvellous. I want the CINEA GAMMA and aother functions that I could not imagine on my HVR-Z1P (See below).
LAstly I had purchased a new SONY HVR-Z1P HDV camera 16 months ago for use as 1080i/50 for most of the work I wanted to do. I soon found the restrictions as above in the codec. I was wanted about HDV but pressed ahead.
HDV is a great format for most however I am about to put the hardly used HVR-Z1P on EBAY now that I have the PANASONIc new HVX-200, which if it is in your budget, I would highly recommends - get a 16GB P2 card ad you're set. Works flawlessly with FCP 6.
As poster 'G" points out, you can go to consumer based cameras that will work ok for you but they are restricted in the sense that you "GET WHAT YOU PAY FOR".
ALso AVCHD H.264 based cameras take a great 720P shots for the holiday trip but these are too not to my liking even though my wife has a SONY XACT HD2... which is great to pull out and spray around when you wanna gun and run.
Summary- if you know what you want to do (your goals) and you want to take advantage of FCS 2 and other tools and etc, the camera is a another piece of the toolkit but a VERY importat one. fwiw
w
HONG KONG

Similar Messages

  • Cameras for Final Cut Pro.

    So I have a JVC camcorder which shoots the HD files as .TOD files and a Sony AVCHD cam that saves as .MTS. Its a pain to convert these files using MPEG Streamclip every time. I shoot a pro wrestling show that was just picked up for television and leaves me with just two days to edit the shows. Converting all that footage usually takes a few hours out of one of those days. So I am looking for a camera that shoots footage and saves it as .MOV so it would go directly into Final Cut. My budget is kinda low at about 400-500. Thanks!

    There are several ways to get edit-ready footage, but none of them are cheap...  My personal favorite is the Ki-Pro from AJA systems which will transcode the footage (from qualifying cameras) to ProRes 422 (in a 10-bit colorspace) to hard drive or CF cards on-the-fly. It can also cross-convert on-the-fly so you can match formats from dissimilar cameras. And working with 4:2:2 footage is always nice...
    If you are on a Mac Pro, I can't see how the Log and Transfer could be taking hours. I had to bring in some DSLR re-shoots on a feature last year and my system was always waiting on me.

  • Compatible cameras for FINAL CUT PRO 5.x available in latin america?

    Hi! So I have a big problem, none of the camera models mentioned in the compatibility area of the final cut webpage are available where I live. Is it true that no other cameras are compatible? There's an entire series of cameras SONY DCR-HC42, 46, 52 etc. that are for sale here and not mentioned there. Also true of old JVC and Panasonic models. Please help me figure this out, I have to buy a camera to capture some video I have on MINIDV onto the final cut I have and have to know I'm not buying a camera that won't work.
    thanks
    rdl

    Thanks. That's what I thought. Plus, models available in latin america are apparently not the same as those available in the US and Europe, and my suspicion is they haven't been tested.

  • HT201109 video cameras for final cut pro x

    which canon camcorders are compatible with FINALCUT PRO X

    http://help.apple.com/finalcutpro/cameras/en/index.html
    This will give you a list of tested cameras. There are probably many other models that have not been tested.

  • Canon EOS MOVIE Plugin-E1 for Final Cut Pro Now Available...

    There's been so much talk about the 5D, 7D, 550D on this board that I'm going to point to the EOS MOVIE Plugin-E1 for Final Cut Pro. This is supposed to speed to transcode of Canon Camera H.264 to FCP-friendly formats and let you add more metadata along the way.
    Enjoy!
    Canon webpage. Under Drivers & Downloads. Once you select your OS, "Mac OS X", the download should appear near the top of the "Software" list.
    Note: (from Quickstart Guide)
    This plug-in software allows you to convert MOV movies shot with an EOS Digital camera into ProRes files at high speed in the (Log & Transfer) window of Apple's Final Cut Pro.
    FWIW: The quick start guide says cameras involved are 7D, 5D, 1D, no mention of 550D. Sort of odd.

    For users in North America to make the Canon EOS REBEL T2i work (550D for Europe):
    1. Install the new Canon EOS MOVIE Plugin-E1 for Final Cut Pro (http://www.usa.canon.com/consumer/co...nloadDetailAct)
    2. Go to Library/Application Support/ProApps/MIO/RAD/Plugins/CanonE1.RADPLug/Contents/Resources/
    2. Open up cameras.plist
    3. After the 7D info add the following lines of code (keeping to the coding structure):
    <key>T2i</key>
    <array>
    <string>Canon EOS REBEL T2i</string>
    </array>
    4. Save the text file. Close it. Everything should work now.
    Cheerz.

  • Which firewire interface for Final Cut Pro on MacPro?

    I currently own a Presonus Firepod, and it seems to work pretty well, but may sell this when I upgrade from a MacMini to a MacPro. I use my Mac for Logic Pro currently.
    I anticipate running Final Cut Pro in the near future, so I'm wondering about the ability to read/generate SMPTE time code that the MOTU traveller supplies?
    There will be no external mixer, so this interface will connect directly to speakers & headphones. (would be nice to be able to mute speakers and control headphone mix using just the firewire interface).
    I don't anticipate needing more than 2 Mic inputs - and my current mike is a Rode NT1. (As the NT1 is not a top-of-the-line mic, unsure if I should place a lot of emphasis on worrying about the pre-ams?)
    I would like decent mic preamps, and ability to graphically monitor input and output levels (is this graphic monitoring necessary, or is just the single overload indicator sufficient?).
    Which interfaces in $600-$1500 range would work best with Final Cut Pro - and Logic Pro?

    I saw the Traveller ads in Videography mentioning
    time code, so I presumed it had an advantage over
    other interfaces.
    I found this in some ad copy:
    """The Travler provides on-board SMPTE time code synchronization features that allow you to slave your Traveler system to SMPTE time code without a synchronizer. The Traveler provides a DSP-driven phase-lock engine with sophisticated filtering that provides fast lockup times and sub-frame accuracy. The included MOTU SMPTE Console software provides a complete set of tools to generate SMPTE for striping, regenerating or slaving other devices to the computer."""
    So it likely uses an audio port for timecode I/O. However, unless you have external equipment that you want to slave to Logic Pro, (or have Logic slave to) e.g. a timecode DAT, then this really is not necessary. FCP would not see the Travaller as a "controllable" device.
    For Final Cut Pro use, I'd probably shoot in HDV.
    When shooting a green screen near my computer (or
    maybe even on-site), I wondered if there would be an
    advantage to recording the audio thru an interface
    like the traveller.
    The advantage is that you could capture additional mics and audio tracks with your mac while the cameras shoot. Just slate your takes and sync up later.
    Do I actually need an interface that provides time
    code, or is that only needed for movie work?
    I have SMPTE I/O on my Unitor8, directly accessable in Logic Pro. In 8 years I've probably used it twice to capture audio from some modular digital multitracks. So, unless you have some specific need.....
    Maybe it is simpler just to connect to the mic
    directly to the camera's input?
    Indeed. You should always have camera audio available. Anything else is supplemental. Alternatively, you could use the Travaller or RME, etc. as a "live to camera" mixer in a studio situation. Plug your mics into the interface, create a submix and send it to the camera while simultaneously capturing each mic to an individual track in Logic Pro. There are many possibilities.
    G5 QuadPPC2.5, Ram:12.5g, Magma PCIe-PCI expansion   Mac OS X (10.4.8)   2X Hammerfall DSP Digiface+Multiface, Digi 002r, 4X UAD-1

  • I need to buy a camcorder -- upgrading from a Flip. Which would you recommend as easiest to use with iMovie 11? Which for Final Cut Pro? Thanks!

    I need to buy a camcorder -- upgrading from a Flip. Which would you recommend as easiest to use with iMovie 11? Which for Final Cut Pro? Thanks!

    You can't run iMovie 11 on a PPC G5 running the old OS 10.3 Panther - which is what you say you have.
    iMovie 11 - cameras supported:
    http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
    iMovie 9 - cameras supported:
    http://support.apple.com/kb/HT3290?viewlocale=en_US
    iMovie 8 Camcorders supported:
    http://support.apple.com/kb/HT1014
    Digital camera RAW formats supported by OS X Lion:
    http://support.apple.com/kb/HT4757?viewlocale=en_US
    Digital camera RAW formats supported by OS X Snow Leopard:
    http://support.apple.com/kb/HT3825?viewlocale=en_US

  • How to encode Panasonic HDC-TM700 footage for Final Cut Pro?

    How may I encode Panasonic HDC-TM700 footage for Final Cut Pro? It is 1080p/ 50 fps (in Europe)....

    I have not bought the camera yet so I cannot try. I have heard that the footage is not suppose to be supported that easily since it is 28 MBS "Avchd?" format. However people seem to be able to edit it in Imovie....

  • New Canon EOS Movie Plug-in-E1 for Final Cut Pro

    Just thought your would like to know. From canonrumors.com
    http://www.canonrumors.com/2011/04/canon-updates-e1-plugin-for-fcp/
    Canon today announces the latest update for EOS Movie Plug-in-E1 for Final Cut Pro – the company’s custom-developed software application that provides quicker and easier editing of EOS Movie footage in Apple’s Final Cut Pro software suite.
    Launching to coincide with the start of the 2011 National Association of Broadcasters (NAB) Show in Las Vegas, EOS Movie Plug-in-E1 for Final Cut Pro version 1.2 will make the importing of EOS Movie files even easier, allowing users to transfer files from any folder, without needing to mirror the folder structure on the camera itself.
    The update also enables smoother importing from Canon’s EOS 7D, EOS 5D Mark II and EOS-1D Mark IV models, allowing users to import footage without requiring the THM file generated by the camera.
    Originally launched in February 2010, EOS Movie Plug-in-E1 for Final Cut Pro is designed to quickly and seamlessly convert EOS Movie footage from Canon’s leading range of EOS DSLR cameras to Apple’s high-quality ProRes 422 codec. The plug-in allows users to convert footage at approximately twice the speed of Apple’s standard conversion, creating a smoother workflow for the rapidly growing number of videographers shooting HD video content on DSLR cameras.
    EOS Movie Plug-in-E1 for Final Cut Pro version 1.2 will be available to download for free from 25th April 2011.

    And I just spent over an hour yesterday explaining to a client how utterly essential it was to maintain the exact folder structure for proper log & transfer:/
    If I say that once a day to students, I say it a thousand times.
    On top of that I just started Carbon Copy Clone today with all my updates in my editing lab. Not the end of the world but it's a little time consuming on 80 stations. Oh well.

  • Anyone use a 2012 mac mini for final cut pro x?

    I am considering buying a 2012 quad core mini to use for Final Cut pro X.  I've looked everywhere on the web, and can't really find an answer as to whether or not this is a good idea.  The main reason I'd do this over a 2011 refurbished iMac is for the USB 3.0 ports.  I'm currently using a 2010 mid-level iMac, and find that I need to use proxies if I do anything multi-cam.  I do know that buying the mini, thunderbolt display, and mouse/keyboard costs about as much as buying a new 27" iMac.  Would the ivy bridge mini be faster than the 2011 refurbished quad core iMac for rendering and exporting, or slower because of the intel 4000 graphic chip?
    Thanks

    OK...here's an interesting tidbit...320M is supported by OpenCL according to The Oracle, aka Wikipedia
    http://en.wikipedia.org/wiki/OpenCL
    However, a look at the official Apple Snow Leopard docs suggests that they withdrew support for 320M.
    http://support.apple.com/kb/SP575
    Sometimes The Oracle is wrong.
    Message was edited by: S. Michelle Klein-Hass to note differences between what is up on Wikipedia and the most recent version of the Apple Knowledge Base article.

  • Where can I find a full manual for final cut pro 6?

    I'm trying to learn final cut because I haver an amature film making contest I'd like to enter and that would give me quite an edge, considering most of the intries will be using movie Could someone help me find a full manual or something that would assist in this indevor? I do only have final cut 6 because I am using my schools imac and that is ther vertion they have. so, can anyone help?

    You should ask your question in the Final Cut Studio forum.
    This forum is for Final Cut Pro X.

  • Can I add a secondary location for Final Cut Pro Documents?

    Hi Guys,
    I'm working on a large project which has taken up most of my 2tb hard drive which I use for my final cut pro documents (capture scratch, render files etc). Is it possible if I plug in another hard drive to use that as a secondary location for final cut pro documents as I have other (smaller) projects which I could be uploading and working on in the mean time? If so, how is this achieved and what are the pros / cons?

    Sure -- go to Final Cut Pro menu on your menu bar and select System Settings.
    The first tab is SCRATCH DISKS -- that's the term too -- not secondary folder for FCP Documents.
    Change it there.
    Drawbacks...
    It has been a while since I've had to deal with this, but FCP used to not remember (feature or bug??) a project's original scratch disk location and if you change it for ONE project it will be changed for ALL future AND past projects... until you change it back.
    Now, that in itself isn't a BAD thing. All that that means is that if you continue to capture material into that old project it will now put it over here instead of over there. Also, other things like render files and such which won't really matter much unless they do... and now you've got stuff spread over a coupla drives.
    FCP's projects don't care. They've already mapped where they need to go to get the video and render files it needs. Move your Scratch Disk 33 times... won't make a difference to the browser and timeline. -- UNTIL you remove one of the important drives. THEN red lines galore! Un renders, missing files... messy messy messy!
    Much better to start and finish a project in scratch disk. Makes for easy cleanup. Kinda like cooking thanksgiving dinner (American??) in 5 houses at once.
    Good luck,
    CaptM

  • Following Media Files Are Not Optimized For Final Cut Pro

    I'm sure you've seen this before and I've tried to search for a thread on it here and fell asleep, so sorry if this is a repeat.
    I have edited projects in Premiere Pro (on my PC) and I have tried to transfer them in FCP. It worked with the exception of two things:
    1. the error message, "Following Media Files Are Not Optimized For Final Cut Pro"
    2. the quality *****! watching it on the playback in FCP it looks great, but then when I burn it to Disc it's pixelated in spots and generally has a lower quality picture.
    I know that it's Standard Def. and can't expect the best, but I've done it before (once or twice) and it didn't seem this bad.
    Can someone suggest anything to help the quality? Should I run my AVIs through MPEG Steamclip to make it a QT file and if so what is the best format in that since there are many to choose from and most I'm not familiar with?
    Thank you,
    Crayton

    I did compress them to DV NTSC then burned it to DVD and the result was no bueno.
    I thought what I would do is try compressing them again before I send them on over to DVDSPRO. Here is a simplified break down of the situation:
    - I have edited the raw footage in Premiere Pro on my PC. They were recorded and captured as SD.
    - I rendered them in Premiere, then transfered the rendered AVI file to FCP.
    - When went to place the files in FCP, I received the warning message; "Following Media Files Are Not Optimized For Final Cut Pro" but I went forward anyways and it allowed me to do so.
    - Originally I went ahead and compressed them from FCP to QT Movie as a DV NTSC, which ended up poorly.
    - Therefore my question is, should I compress them using another file type (other then DV NTSC)? Which leads me to another program that I have called MPEG Streamclip, which offers tons of file types of which I am unfamiliar with most. I want the best quality of course but don't know what file type is the highest going from AVI to a format that can be accepted by FCP and ultimately DVDSPRO. Keeping in mind that I only have FCP5 and do not have Prores.
    Did that make sense?
    Thank you again,
    Crayton

  • I can't install trial version for final cut pro x

    I can't install trial version for final cut pro x on my computer..

    What are you trying to achieve?  Are you editing movies as a hobby? Or trying to build a business – and, if so, what kind?
    iMovie is the first thing that comes to mind. Not the depth of FCPX, but it can still do some excellent work.
    Russ

  • MacBook Pro 13" or MacBook Air 13" for Final Cut Pro?

    I am looking at buying either a MacBook Pro 13 inch with 8Gb of RAM, 750 GB, and a 2.8 Ghz i7 Processor or a MacBook Air 13 inch with the 4gb of RAM and a 1.8 Ghz i7 processor. Which is better for Final Cut Pro X? I would rather have the Air, but if the Pro is better (which is what I currently have) that's what I will get.

    Is it a very noticable difference? Will I REALLY notice it? I know that the Pros are more powerful but I just wanted to factor in the SSD in the Air.

Maybe you are looking for