Camera for tablet

I am using a tablet,I had a problem on how to use the cam in skype for video call. What should I do.

Demo wrote:
Dahliarn wrote:
Basically, decent pictures are fine with me as I am not picky. Distorted and grainy pictures are just unaccepted.
Take it back if you're not happy with the camera. If you want to take great photos, buy a decent camera - not an iPad.
Demo,
Any digital camera that is, at least, capable of taking 3 MP pictures, is going to give pretty good results and allow for some enlargement.
While the iPad's shape and size make picture taking a little awkward, the 5 MP rear cameras in newer iPad's are capable of taking great pictures when plenty of light is available. And you can get really nice 8 x 10 and 9x12 enlargements from those pixel size images.
I have taken quite a few images with my iPad as it is always with me wherever I go.
The images don't match the higher quality of my older 10 MP Sony DSLR, but they are pretty good with enough ambient light.
I wish iPads did a flash light next to the lens, though. It would make taking images in subdued light a better experience as I do not have to always edit these types of darkened images all of the time.

Similar Messages

What are the appropriate document/stage dimensions in Flash for tablet optimized apps?

What are the appropriate document/stage dimensions in Flash (width x height in pixels) for tablet optimized apps?
(Dec. 2013)
Using Flash and AIR for Android/iOS I would like to develop a educational interactive title optimized for tablet PCs, hopefully both the Android but finally also the iOS platforms. With so many tablets on the market today and with different resolutions (and even aspect ratios) I have difficulty deciding what document/stage size to set for my project/app. I have been experimenting with an Android Google Nexus 7 and Samsung Note 10 tablets and discovered that Android automatically resizes the app's stage to fully fit the screen of the tablet BUT this creates the following two issues for me:
if the stage/document size in Flash is too small and I include bitmaps when the app's stage is enlarged to fit the tablet screen the bitmaps look pixelated.
If I make the stage dimensions too big so that there is no bitmap pixelation because the bitmaps will be shrank instead of enlarged, I am afraid that on some older tablets with slower processors the app may be too slow to run (but I have to say that I did not experiment with very large stage dimensions yet).
Until today I had looked at some of the most commonly used tablets on the market and their resolutions Google Nexus 7, Samsung Note, iPads etc and was inclined towards using a stage size of approximately 1280 x 720 pixels which I considered a medium solution, but now the new generation tablets came out (Nexus 7 gen 2, iPad Mini with Retina, iPad AIR etc) with much higher resolutions so I don't know what size to use now. Anybody has any suggestions?
I would appreciate any ideas and suggestions on this matter.

You explained your problem well enough that looking at the picture won't matter. It looks like you found out too late that one of the first things you should do when you create a Flash file is set the movie properties, which include the dimensions and other things like background color, frame rate, publish settings, etc. While the string that I just listed can pretty much be revised anytime, the dimensions should really be done before anything else, when possible.
One way to go about resizing is to leave the file as is and specify the larger dimensions in the html page code. This could end up reducing the quality of any bitmaps you might have in the file(s) since you would essentially be enlarging them, but any Flash drawn elements will resize cleanly.
If you resize the stage, then you don't have much choice but to resize and relocate everything in it keyframe by keyframe.

Do you have any more information about the Lightroom Mobile for tablet? [was:Information]

Hey just doing a check. In. Do you have any more information about the Lightroom app for tablet? Like when it is coming out, what features will it have? Because I can't Waite. Especially for editing a raw file on a tablet. Excited.
I do have a Few questions. 1. Will the app have a library mode that allows the photographer to display the raw files on the app like how photo shop touch does. Example. When your import a photo from the iPad it shows up in the photo app that Apple makes. But when you take that photo into photo shop and save it as a psdx file, the project or photo does not show up in the original photo app by apple.
2. Will the app use the smart previews when you import a raw file on to the iPad the same as you do with a computer?
3. Do you have to Waite to go home to edit a raw file or can you edit on the tablet once you import the photo from camera to iPad? Instead of going home import to computer into Lightroom 5, then to adobe cloud, then to iPad.
4. Will the app display catalog, book, etc modes like Lightroom 5 has?

At this stage, we don't know any more about Lightroom Mobile than Adobe revealed in Sep 2013
http://laurashoe.com/2013/09/09/on-the-adobe-horizon-lightroom-mobile/
Adobe will reveal more when they're good and ready.

Stylus for Tablets.. How about use on Cellphones as Well

I wanted to ask a Question i hope it doesn't come Over as Dumb one but here it Goes i want to Get a Stylus for My Droid X an my Razr Maxx i found one at Office Maxx. It's made by Targus i want to use it. As some times it's hard to hit those little Keys when Texting. Here's look at it.
Targus Stylus for Tablets- Green ,
The Targus Stylus for Apple iPad makes it easy to take notes, draw or simply turn a page. The stylus features a durable rubber tip that won't scratch the iPad's surface and allows the user to type accurately and comfortably. The stylus engages directly with your electronic, touch-screen device, requires no power or software to operate and instantly works right out of the box. Featuring a vibrant blue color to match the Apple iPad Smart Cover, this accessory is both stylish and convenient for daily use.

I don't think it's a dumb question! I used a stylus for years on my Palm Treos. At times it could be very handy. Then out came iPhones and Androids, and oh, a stylus is too crude and backward for these slick devices! (Oops, too sarcastic. )
But check this: http://pocketnow.com/android/samsung-announces-galaxy-note-smartphone-the-stylus-is-back . Everything old is new again, I guess.
I think the stylus is a personal preference. Some people like 'em and some hate 'em. If you want one and it works for you, go for it! But you should definitely try it out to see if it actually works on your phone before buying.
And for some light reading from an anti-stylus point of view: http://www.extremetech.com/computing/98923-how-steve-jobs-killed-the-stylus-and-made-smartphones-usable

HT4972 I have ipad 1 . And i want to update it from ios 4.3.5 to ios 7 but i can't why ?? Please help me becouse i can't download apps from app store !!!!! I would suggust: 1 to create a big camera for i pads and ipods and iphones so we can put it in a

I have ipad 1 . And i want to update it from ios 4.3.5 to ios 7 but i can't why ?? Please help me becouse i can't download apps from app store !!!!!
I would suggust:
1 to create a big camera for i pads and ipods and iphones so we can put it in another ipad or ipod or iphone and it has a zoom lens
2 when i downloaded photos and music from a computer to my ipad , i cant delete them now plese do the itunes like samsung becuz samsung have an easier way to download thing from computer
I hope to help me with my poblome and fix it please !!??
And i hope to take my suggusts and make me happy becouse apple it is cooler from samsung
Apple the best
H.M

The iPad 1 can't run the newer operating systems. It'd be like trying to play a bluray disc in your 6 year old dvd player....it simply lacks the hardware to make the software run.
No suggestion about the camera, but given that Apple's attitude seems to be to focus more on the more mobile devices for photography (the iPhone and Touch cameras got features, the iPad and mini didn't), that is highly unlikely. You can tell Apple what you want, but you'd probably be money ahead to get a digital camera.
as to the photos, anything put on via iTunes has to come off via iTunes.Your main alternative would be to look for photo apps that offer file exchange that may give you more functionality.

Can I use an IP camera for FaceTime on my Mac mini?

I have a Mac mini running Mountain Lion and I would like to know if it is possible to use the streaming video from a wireless IP camera as the video source for FaceTime (and other video apps). If so, how?
Thanks!

HI,
My mistake. I saw the Mac Mini spec and presumed you were looking for any camera and had come across Wireless IP ones.
I know of one BlueTooth one (just to keep a spin on it ).
I have heard good things about this one - but mainly from 2 years or so ago when it was new.
Actually Wireless IP ones I know next to nothing about.
One of the main issues with iChat 2 through 4 is that the Video that iChat accepts is limited to DV from the External Firewire cameras that were about or certain USB Cameras that produce output that works with the Utility from Ecamm or the Apple Framework item that was introduced later in OS X 10.4 for the USB 2.0/UVC compliant cameras.
By Snow Leopard and iChat 5 most computers do have USB 2.0 ports and all but two of the Mac range have Internal Cameras that are in fact USB 2.0.UVC Compliant.
On the other side as it were, are Camcorders also move to USB 2.0 over Firewire.
However in many cases the output is not DV and none are UVC compliant.
The video signals from these cannot be "translated by either the iUSBCam Ecamm utility or the internal Driver from Apple.
So the main issue will be the format of the Video output from the camera for iChat or Messages.
Other apps, particularly Quicktime, are going to have less of a problem as Quicktime can handle many more formats.
7:54 PM Saturday; November 24, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Which cable do I need to connect my Mac Book Pro to my Panasonic PV-GS150 video camera for transferring video to iMovie?

which cable do I need to connect my Mac Book Pro to my Panasonic PV-GS150 video camera for transferring video to iMovie?

I totally understand.
Check some things from here, I have 2 and they have been great so far.
Check here, lots of storage and reasonable prices. Also great support, you get to speak to a person
Clean off your on the G5 drive and off you go.
I suggest buying a second drive and setting it up for a back up, Time Machine or Carbon Copy Cloner, or SuperDuper (both "bootable" back up) All searchable on the web.
http://eshop.macsales.com/search/elite+pro
You can talk to a person for REAL advice, Phone: 800.275.4576 Ask about exporting to your G5 and and exporting to your existing OSX, you may only need a small inexpensive drive for this.
Quick delivery and willing to help.
Hope this makes you back up and running :-)
Do get a back up drive, as it is not ""whether my drive will fail, as much as "when my drive fails"
All the best

LV7.1 Strange behavior with Automatic Error Handling occuring when it shouldn't [LV 7.1 Pro on WinXP for Tablet PC's]

[LV 7.1 Pro on WinXP for Tablet PC's]
I recently let a rather large LV app of mine run in the development environment while I was out for a couple of days. Upon returning I found that the app had hung for ~22 hours waiting for an answer to an Automatic Error Handling (AEH) dialog proclaiming an Error 7 in New File without any indication of the VI hierarchy that called New File. I set about ensuring that AEH dialogs would not pop up and have not been able to discover how I could have possibly received one in the first place.
Subsequent investigation revealed:
Neither AEH option in Options>Block Diagrams were checked.
Network problems had occurred around the time that the app had hung. All file paths are network paths when running in the development environment, so the cause of the error was most likely valid, even if the AEH dialog appearance wasn't.
My app has only one instance where the New File primitive is used by me. That subVI and all others above it in the hierarchy DO NOT have the AEH property enabled. The error out cluster of New File in my subvi is wired.
My app has three instances where New File is called from a vi.lib vi (Open/Create/Replace File.vi, Open Config Data.vi, and Prompt Web Browser Path.vi), none of which have the AEH property enabled. Nor does any of their calling VI's. All three instances also have their error out cluster wired.
A utility to examine the AEH property of all VI's (with all top level and dynamic VI's loaded) in memory reported that only 1 of 308 vi's ( RGT Does File Exists.vi from the Report Generation Toolkit) had that property true. That vi has no subVI's other than the File/Directory Info primitive and no calling VI's in common with any of the vi's that call New File, except a top level VI.
As long as 'Enable automatic error handling dialogs' remains unselected in options>block diagram, I am unable to get an AEH dialog for either the New File or File/Directory Info primitives in a test VI with AEH property enabled and their error out clusters unwired no matter what invalid path I pass to the functions. As soon as the options>block diagram>Enable AEH dialogs' is selected, both primitives fire AEH dialogs with no error out wired and don't when wired. i.e. works as advertised.
In other words I can find no reason why I should have gotten the problem AEH dialog...
I cannot afford for this app to hang because of a network problem, other portions of the app that were running concurrently correctly handled the error and, had the AEH dialog not appeared, the app would have made corrections or shutdown in an orderly fashion.
Any ideas?

Very good.
Write Characters to File.vi>Open/Create/Replace File.vi>New File
New File throws the error. Open/Create/Replace strips the hierarchy from the source of the error. Write Characters passes it to the General Error Handler. I never looked above O/C/R file in the hierarchy except for enable automatic error handling property. The tip-off should have been to realize that O/C/R file was stripping the hierarchy from the error and look above that.
The real irony is that Write Characters was being used to log error cluster data to an error log file...
Save as... Copy without updating... the OEM 'Write Characters to File' is gone from this app.
Thanx (a bunch)

Is there a way to create a vertical menu for tablet that stays in place?

I am a novice in web design, and I want to make a vertical menu for a tablet page that stays in place.
It should not scroll, and it has to resize depending on screen size, so it looks the same across different tablet sizes.
Is this possible in Muse? After reading some posts I am getting the feeling this is not possible at all, is that really true?
If it can't be done in Muse, can I do it another way? In Dreamweaver for instance?
The reason I want this is that in my opinion horizontal menu's for tablets are ergonomically bad design, and just plain annoying. You always have to use two hands, lift one hand and then you probably block the view of the screen.
Vertical menu's for tablets just make more sense since they can be made so that you could place them on the side of the screen so it would be possible to navigate with the hand that is holding that side of the tablet.
I hope someone can help me.

Yes, I am using the widget.
It seems it is not possible to make the menu stick in tablet design (the pin options are greyed out). Nor is it possible to make the menu scale with screen sizes.
A possible solution would be the ability to make it stretch to 100% screen size, like you can with horizontal objects.
I have noticed though, that, for some reason, in web design it is discouraged or very hard to make things stretch 100% vertically. It seems to cause problems, and I don't understand why.
Since I have started in web design, I have seen many posts of people having design problems, where stretching 100% vertically would be the obvious solution.

HT2986 I got a Samsung video camera for Christmass. I get error message when trying to down load video. Pictures down load fine. I have a Imac with system 10.5.8 and Imovie 8 (7.1.4). Is it camera problem or something on my end. Any help is appreciat

Got a new video camera for Christmas, Samsung HMX-F80, it down loads pictures just fine, but videos I just can't get it to down load. I was able to down load to my PC part no problem.
MY Imac, System 10.5.8, Imovie 8 (7.1.4). Do I need to upgrade? Or what.
Any help is appreciated.

Is it listed here?
iMovie 8 Camcorders supported:
http://support.apple.com/kb/HT1014

Adobe Photoshop Touch for tablet

Does Adobe Photoshop Touch for tablet support raw-files?

No, not at this time, sorry. (Be aware that even if it did, I wouldn't expect you'd get to work with many layers due to the hardware limitations of tablets. You can only work with 12 layers max as it is. Just a heads up.) JPEG, PNG, GIF, PSD, & PSDX are supported.

Video camera for greenscreen work +

Hi. I'm going to be setting up an in-home studio for a weekly, 1 hour show (to be viewed on the internet, not sure if could ever get it onto public access stations but might like the option).
The studio will be 20' long by 16' wide (probably minus a carveout for a bathroom) - but will retain a 20' length for filming.
For noise control, planning to hang heavy black curtains on the sides and camera end, add some carpeting, and possibly some simple / inexpensive treatment on ceiling as well. Will either paint back wall green or get some chromakey material to shoot against. WIll have a desk with 1-4 people for the show, positioned 6-8 feet from the greenscreen, and the camera on the other end (roughly 12 feet away)
I'm trying to keep the cost as low as possible, but would like it to be a step up from my $200ish consumer camcorders (a JVC Everio and a Canon HV20), so I've been looking at some used Prosumer or Professional Video Cameras that would allow me to capture the 4:2:2 colorspace I want to do for improved Chroma Keys. (I have Adobe Master Suite CS6 and will be doing my work in After Effects and Premiere)
We have a Sony DSLR A200 which came with a couple of lenses, but don't have any additional lenses beyond that (or much camera experience - so all sugestions welcome).
Cameras I've considered include
Sony HVR-V1U which I can get locally for about $1000 or less; one just sold on Ebay for $800ish - I'm a bit reluctant to make that big of a purchase there, but might consider it if a well established seller / store - B&H suggested this camera didn't give you 'true' 4:2:2 colorspace via HDMI; Sony said it did give you the colorspace, what was lacking in these earlier models (or hmdi ports maybe) was ability to transmit full intensity data (for brightness)
Think I might need to buy an HDMI Capturing device to get the 4:2:2 signal - Atomos Ninja 2 runs just under $700, lets you record directly to Hard Drives so fairly inexpensive option for massive storage; Have also seen a variety of products from Blackmagic (Intensity Pro - and Hyperdeck Shuttle - ranging from $150ish-$350ish)
Canon XF100 is newer, seems to be a superior camera. Records onto generic Compact Flash cards (which could help limit expense and make for easy editing); and meets 'broadcast standards' of 50Mbps at full HD, and might not need external HDMI capture - saw these at B&H for between $2000 used, $2500 new; Currently listed for $2100 at 42nd Street Photo.com - which looks legitimate as best I can tell.
Heard BlackMagic Pocket Cinema Camera mentioned as well - much cheaper, roughly $1000 for new - but seemed like those might need a variety ofa dd o (dont know if compatible with my Sony lenses) - and require fast (expensive) SD cards
Would welcome any advice about good video camera for greenscreen work - along with any experience on the Atomos Ninja 2 or Blackmagic products retailed above (and any tidbits on setting up audio/video studio; will be recording some music in there as well)
Thanks

It's a trade-off ... which is to say, it's like Life in general, right?
That many people that close-in is gonna be awful tight. Two people, ok ... three pushing it ... four is gonna work you some. Getting talent any farther away from the background given the limited distance the camera can move is not likely, without getting too wide a view from the cam exposing off-screen areas.
As to the screen blending into the floor ... you can affix the front edge out from the wall such as to get a curved shape that can visually blend wall into floor, you need a good two-feet radius to pull it off though. And if someone steps back, um ... yea, screens and photog's background paper can easily get a fresh new hole in them.
The "cove" backdrop support is a common commercial photographers tool ... needs to have at least a two-foot radius to be able to blend it visually from floor into wall. Often made by cutting 1/4" ply into 4-foot squares, then drawing a circle on them with a 2-foot radius, cutting out with a jig saw ... resulting in four corner sections that will be used for building the cove itself. Each with that radius of a circle cut out of it. Screw some small wood blocks onto the straight sides, using these blocks to fasten the cove-form sections to the wall and floor, then maybe three blocks flush with the edges of the cove one in the middle of the arc, then equidistant each side from there. Measure from an inch or two off the cove form onto the floor up flush with the bend of the cove and an inch or two past the cove-form up the wall. Cut a strip of 1/4" ply or masonry board or whatnot (some short of thin bendable but tough sheet good) that fits this dimension, push them tight to the form and screw through the sheets into the woodblocks on the cove forms.
Then your screen material can just drap over it and you won't step through it. We built one for our studio, it's 12 foot wide, works great ... and put two layers of 1/4" ply over it, the first stopping just at the edge of the cove form, the other going past that another inche and a half or so.

Where can I buy a camera for facetime so I can usem it on my mac desktop (mac mini)

Where can I buy a camera for my mac mini to use face time?

Hi,
The software for your printer is available from Apple Software Update and not as any installer from teh HP site.
Follow the steps below to install the printer on Mountin Lion:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03378792&tmp_task=setupCate gory&cc=us&dlc=en&lc=en&os=219&product=441116&sw_lang=
For any issue getting the drivers be sure to reboot your Mac and try again.
If there are still issues getting the driver, install the package below and then add the printer under Print & Scan:
http://support.apple.com/kb/DL907
Shlomi

I use my camera for video and photos. When I download my videos to my ipad1 using the camera connection kit, they will not play on my ipad. Is there a way I can get them to play?

I use my camera for video and photos. When I download my videos to my ipad1 using the camera connection kit, they will not play.
Does anyone know how I can make this work?

Yvonne-
I haven't tried videos on my camera yet. Do you use the Videos App to play them? I don't think they will play in the Photos App.
If yours are in a format that is not in Vazandrew's list, you may need to sync them to your computer and convert them to M4V or MP4 format. You can use a program like HandBrake to do the conversion. <HandBrake> Once converted, you can sync them back to the iPad and they should play.
This may not meet your needs, but the alternative appears to be getting a different camera. I don't know of another Video App that might work.
Fred

Hi, can someone help me, I did my first page in Muse, and I did just for computer, I need to do for tablet and phone, I have to do? thx

Hi, can someone help me, I did my first page in Muse, and I did just for computer, I need to do for tablet and phone, I have to do? thx
Esto puede ser en español? por favor

Hello,
Please refer to the links below, you will find them very useful.
Adobe Muse Help | Creating a website for Mobile devices
How to create a mobile website with Adobe Muse | Adobe Muse CC tutorials
Video Tutorials:
Design for mobile first | Adobe Muse CC tutorials
Mobile best practices | Adobe Muse CC tutorials
Plan your mobile site | Adobe Muse CC tutorials
Preview your mobile site | Adobe Muse CC tutorials
How to create a mobile website with Adobe Muse | Adobe Muse CC tutorials
Regards
Vivek

Camera for tablet

Similar Messages

Maybe you are looking for