Camera foto HP Photosmart M527-la pornire apare doar ecranul cu toti pixelii activati egal

Problema de soft-la pornire. dupa afisarea logo-ului HP, ecranul devine complet uniform-pixelii activati unuform.Se poate rezolva, la un pret mai mic decit al unei camare noi?

Hi Gica,
This is an English Forum, please continue this thread in English so that other users can benefit from the conversation. I sent you a private message should you want to use a link for a different Language Forum.
Have a fantastic day!
KarolB
I work for HP

Similar Messages

I connect my ipod to my pc and recognize it like camera foto

dosnt recognize it,like camera foto

- It is normal and expect for the computer to see the iPod as a camera since that is how you get fohotos from the iPod to the camera.
- I really do not understandy your problem. The subject line say the computer sees it as a computer. The body imples that it does not see it as a camera.
- If the iPod does not include in iTunes on your computer see:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

I can't get my new iPad to record a video I see the video right above camera but it is not active yet I can't touch it to activate it.

I can't get my new iPad to record a video I see the video right above camera but it is not active yet I can't touch it to activate it.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

Please can someone help,my in built camera on my Macbook Pro is not working what can i do to activate it back.

Please can somone help my in built cameral on my MacBook Pro is not working, the green light does not show again and the camera is not working . what can i do to active it back.
Semako

Yuu can try to reactivate your iSight camera by opening up iMessage.. navigate to Preferences/Audio Video,and then click on Camera. IT shoudl be grayed-out if you only have one camera hooked up to your machine. If you have an external camera, then disconnect it from your machine.

SD card (2GB) for M527 camera

My HP Photosmart M527 digital camera uses a 2GB SD card. I have checked at 3 different supply stores (Staples, The Source and Walmart) I was told that because of advanced technology, this size of SD card is no longer available. My camera is only 7 years old. Am I supposed to just get rid of a perfectly good camera? Does anyone know where I could possibly get the 2GB SD card?

I would hate to hear that you throw away a camera because you cannot find 2 gig SD cards.
Did you look online?That would be your only alternative now. They wont be cheap either Im sorry to say.
Newegg.com
Amazon.com
I dont know if a Micro SD with SD adaptor would work in that model camera or not. Sometimes it works on some, sometimes it does not. It would be a cheaper way to go if it did. Newegg carries those too.

HP Photosmart M525 Digital Camera

Purchased a replacement camera for old M525 , believed I was ordering same exact one. When new camera arrived my old UBS cord doesn't fit new camera. New camera is HP Photosmart M525 / Model : SNPRB-0503 . Could someone please give me suggestion of which UBS cord is compatible with this or an item number of compatible cord. Thank you!

Hi Britney,
All I could find for you was this spec sheet. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00821556
It mentions a USB 2.0 cable for the requirements - so it should fit the standard ones, like the kind you need for a printer. However, just to be safe, I would recommend that you take the camera to a local electronics store, and buy a usb cable knowing for sure that it'll be compatible with the slot
Cheers,
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

HP M527

Hi everyone!
I just recieved a HP Photosmart M527 as a gift. It says it is capatible with Mac OSX 10.4 and has Mac software. iPhoto is supposed to open when the camera is connected and begin to import photos.
When I connect the camera, iPhoto opens, but fails to start importing any photos, and does not show the camera in the source list.
What am I doing wrong? I loaded all the software from the HP CD.
Image Capture does not load pictures either.
Any help would be great!
MacBook Pro 2 GHz Intel Core Duo w/ 1 GB RAM Mac OS X (10.4.7) 6GB pink iPod mini, iMac G3 CRT White

I figured it out
I changed the USB configurations ON the camera from Digital camera to disk drive.
Yey for on-camera preferences!
Thanks anyways!

I have copied photo's to a folder on the iPad. How can I view these foto's?

I have copied some files from an USB memory card to an iPad. I did this by first copying the foto's and movies to my computer. Then i connected the iPad to my USB port, and copied the foto's and movies to a folder on the iPad. I copied them to the folder containing some foto's we made with the iPad. On the iPad we can see the foto's we made with the iPad, but not the foto's I copied. How can i make the foto's and movies visible on the iPad.
Since I don't own an iPad myself, I do not want to install any software on my computer to manage an iPad. I am using a computer with Linux 12.04.

I know you need iTunes tosynchorinize your iPad, and i know ther is a connection kit (i searched internet before posting this question).
The point is:
We are on vacation. the iPad is my fathers. We have here only his iPad and my laptop. We wanted to put foto's we made with a digital camera foto's on the iPad, so i connected the iPad to my laptop, and was able to copy the foto's to the iPad. So they are on the iPad, but they cannot be viewed. Since I do not want to instll software on my laptop I do not need my self, and we see no point in buyin a connection kit for one time use, it would be great if you could just copy foto's to the iPad and then view them.
I would appreciate it very much if someone could tell me how to do this. I am not used to working with tablets.so I am used to thinking "PC wise": youo copy files to a location on your computer and then you use a program to open those files. I know it works differently on an iPad, but it woul be great if this was one option that also would be available.

Photosmart Printing Issues with Windows 7 RC

Good afternoon. I've tried to search for this but was unable to find anything on our specific issue unfortunately. I've got a Photosmart C4180 and it came with HP Photosmart Premium software. While this is fine on XP, the disc is XP only. You cannot change compatibility mode of the file on the CD to XP. I have not had the chance to try copying the CD to the HDD and changing it there (would that work?).
As a result, I've been using Windows 7 RC and Photosmart software that you can download for Vista x64 with very little success using Vista compatibility mode (I've tried both SP1 & SP2). It will install and run, but when attempting to print with it, it is ruining prints and thus costing us money. I've got to go back to XP to print anything and that's of course less than preferable.
The problems: When printing borderless, it skews the photo (rotates it a degree or two) and produces white space in two corners with a crooked photograph. When attempting to print with borders, it stops printing 2/3 of the way through the photo...I guess it thinks the bottom border is supposed to be HUGE. So, unfortunately, compatibility mode is a non-starter and doesn't allow proper printing of photos.
If anyone has any suggestions on fixing those problems, I'll happily try them. Using the older version of Photosmart in WinXP does not have these issues.
While speaking of Win7, does anyone know when HP plans on releasing software that will work properly for it? The time is nigh. RTM has already come and gone with retail to follow on October 22nd. Is there a beta that users can test or sign up for? I'd be more than willing to be a guinea pig, just let me know what needs to be done.
My wife is set in her ways and absolutely must use Photosmart to print photos. It would be very sad if we had a brand new copy of Win7 (pre-ordered) sitting there, waiting on HP to release software that is usable with it.
Thanks for any help you can provide!
Message Edited by hokiealumnus on 08-18-2009 08:27 AM

Good afternoon. I've tried to search for this but was unable to find anything on our specific issue unfortunately. I've got a Photosmart C4180 and it came with HP Photosmart Premium software. While this is fine on XP, the disc is XP only. You cannot change compatibility mode of the file on the CD to XP. I have not had the chance to try copying the CD to the HDD and changing it there (would that work?).
As a result, I've been using Windows 7 RC and Photosmart software that you can download for Vista x64 with very little success using Vista compatibility mode (I've tried both SP1 & SP2). It will install and run, but when attempting to print with it, it is ruining prints and thus costing us money. I've got to go back to XP to print anything and that's of course less than preferable.
The problems: When printing borderless, it skews the photo (rotates it a degree or two) and produces white space in two corners with a crooked photograph. When attempting to print with borders, it stops printing 2/3 of the way through the photo...I guess it thinks the bottom border is supposed to be HUGE. So, unfortunately, compatibility mode is a non-starter and doesn't allow proper printing of photos.
If anyone has any suggestions on fixing those problems, I'll happily try them. Using the older version of Photosmart in WinXP does not have these issues.
While speaking of Win7, does anyone know when HP plans on releasing software that will work properly for it? The time is nigh. RTM has already come and gone with retail to follow on October 22nd. Is there a beta that users can test or sign up for? I'd be more than willing to be a guinea pig, just let me know what needs to be done.
My wife is set in her ways and absolutely must use Photosmart to print photos. It would be very sad if we had a brand new copy of Win7 (pre-ordered) sitting there, waiting on HP to release software that is usable with it.
Thanks for any help you can provide!
Message Edited by hokiealumnus on 08-18-2009 08:27 AM

Lumia 720 camera gets bad after updating to Amber?...

Hi guys,
I got the Amber Update for my 720 last night. It's a nice little update, except the camera seems to perform worse. The images always seems to be washed out and more blurry. in low light it takes (much) brighter photos, but also a lot noisier and blurry. And the images always seems to have an awful green colour tint. I'm a bit annoyed right now . Anyone else experience this on their lumia?
I attached two photos for reference. One is taken before the update, and the other one is taken after it.
Attachments:
Before Amber.jpg ‏1411 KB
WP_20130928_007.jpg ‏2152 KB

LEriCHS wrote:
Hi guys,
I got the Amber Update for my 720 last night. It's a nice little update, except the camera seems to perform worse. The images always seems to be washed out and more blurry. in low light it takes (much) brighter photos, but also a lot noisier and blurry. And the images always seems to have an awful green colour tint. I'm a bit annoyed right now . Anyone else experience this on their lumia?
I attached two photos for reference. One is taken before the update, and the other one is taken after it.
the two images you posted definitely show worse image after update :/
aside from increasing my average battery consumpution on standby, the amber did not affect the quality of my camera / fotos. i have no foto comparison for before n after, but with my overall experience in photography, id say the amber update somewhat improved the camera's low light performance, notwithstanding grain ofcourse.
colors seem to still be acceptable. i think nokia has been able to improve their post processing software along with the update (as far as my experience is concerned).
maybe a factory reset n re-install of the update would help. but before you do that, try to think really hard if you were in the right camera settings / using 'lenses' or other camera apps, etc.
note : always backup your data before wiping the os

Since upgrading to lion and updating HP software my printer (photosmart D5160) will not print to CD/DVD when I try it says my printer doesn't support CD printing. any help will be welcome

Since upgrading to lion and updating HP software my printer ( HP photosmart D5160 driver 3.3.0) will not print to CD/DVD,when I try it says "your printer does not support CD printing". any help will be welcome.

I see those are old posts above but I'm just now having the same problems. I have the original software CD that came with my Photosmart D5160 printer but I can't load it. I get the message "You can't open the application "HP Installer" because PowerPC applications are no longer supported". So I don't have that going for me, which is not nice! But I couldn't really care less about that if I can just find a CD labeler software that will print from my Mac to the D5160. I'd rather by new CD labeler software than a new printer. I've tried a few free CD labeler software downloads, including iWinSoft Label Maker, but nothing has worked so far. I think there's an answer somewhere; I'm able to print documents on regular paper using this printer, but I only bought it (many years ago) to print CD labels and some pictures. It's been used only sparingly and it's been in storage since I bought my Mac 3 years ago, mainly because a I got a free printer with my purchase. Any help is vertainly appreciated!!!

Help! Printing with iPhoto 4 x 6 on new HP Photosmart 8150

This is my 1st time attempting to print a 4 x 6 from iphoto ever....not as easy as I thought it would or should be. I selected the picture in iphoto I wanted to test print it on a the free 4 x 6 paper that came with the Photosmart 8150. The knob was set to borderless
It printed with like 1 1/2 margins on the 4 x 6 photo paper.... The photo printed and looks like a thumbnail or 2 x 3! I tried again and messed with the advanced settings same thing happened. I am responsible for teaching 30 teachers how to use this printer with iPhoto and currently am terrified...Help!

Ok I figured it out but I was amazed at all the extra steps I had to go through....
here is the link for the directions
http://docs.info.apple.com/article.html?artnum=61611

Opening camera or calculator from lock screen

Recently I upgraded my 5S to IOS 8.3 and now faced issue when starting camera or calculator from lock screen.
I'm pressing "home" button to activate screen and then start calculator or camera from bottom menu, but the screen goes black immediately.
When I press "home" button again, I can see that the camera or calculator will be closed and I'm back in lock screen.
Does anyone else have similar issue with 8.3 ?

I currently have the exact same issue with my iPhone 5s.
The previous update was golden and fixed every issue I had with my 5s. I have my 5s set up for Touch ID/password and I was thinking it might have something to do with that, but I haven't gotten around to testing this issue without all of that enabled.
I hate to say it, but I'm glad I'm not the only one who has this issue...
This update also bright back other issues that were fixed in the previous update, for me anyway.
Is there a way for us to officially submit this issue to Apple?

Where do I find the camera app on my iPad 2?

I cannot locate the camera on my recently purchased ipad2. Is there supposed to be an icon for it already on my home screen? Is it something I need to download from the app store? I just assumed it would be there along with the other icons.

You cannot delete nor can you download any of the preinstalled apps. They are not available in the app store. Have you tried restarting the iPad? Did you swipe from screen to screen to look for it. Is it possible that you put in a folder on your iPad?
Try this, from your home screen, swipe to the right and the search feature appears. Type Camera into the search field. If it shows up, tap it to activate the camera.
One other thing you can do is reset the home screen layout. Go to settings>General >Reset>Reset home screen layout and that should put the app back on the home screen.

Video Cam RoboHelp X4.1

Running an old version of RoboHelp Explorer for Word X4.1.
Using it on WindowsXP. When using the Software Videow Camera the
Record button is grayed out. Any suggestions on how to activate
this button. I can view sample video but cannot create my own
video.

Hi wjc7 and welcome to the RH community.
This tool was a very erayl attempt to provide a video capture
tool but has long since past its sell by date. To be honest it
would be best to download the trial version of a tool like
Captivate and use that. Captivate is the successor of this tool
anyway.

Camera foto HP Photosmart M527-la pornire apare doar ecranul cu toti pixelii activati egal

Similar Messages

Maybe you are looking for