Camera Freezes Cant switch Views

I have the ipod Touch 4th generation. I have had small camera troubles in the past. like not opening. But i could fix that by reseting my network setting and it worked every time. Recently i opened the camera and i noticed i cant switch views. Also i went to take a video and i clicked record and it just froze as the image it started at. it wont even show a time. Im very frustrated. ive turned it on and off didnt work. im not sure whats wrong? any ideas?

Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears)

Similar Messages

I also have the same issue..whenever i turn the 60 fps mode on the camera freezes while switching from video to any other mode...does everyone have the same issue?

My 6 plus camera freezes while switching from video to other modes after 60 fps is enabled....does everyone else have the same issue?

Yup, i have the same issue, i reported this with apple and there is ticket opened for me with
the engineering section. more that month still not solved. I was hope after update to IOS 8.1.3 to fix!
But not fixed yet.
YOu should to report also with apple bro.

I have an external camera, IceCam2, connected to my MacBook Air, but I cant switch to the camera when I try to use videocam on a websayt. How do I switch from internal to externl camera? In use is Adobe Flash Player, but I cant open that program, is the s

I have an external camera, IceCam2, connected to my MacBook Air, but I cant switch to the camera when I try to use videocam on a websayt. How do I switch from internal to externl camera? In use is Adobe Flash Player, but I cant open that program, is the s

I think the McAfee suite will do the trick when I pay them a one-time fee of $69 or $179 for a year for unlimited support.
Your call of course but IMO a waste of money. Please read this first:
There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac has NOT been infected by a virus, it may have another security-related problem, but more likely a technical problem unrelated to any malware threat.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435
The User Tip (which you are welcome to print out and retain for future reference) seeks to offer guidance on the main security threats and how to avoid them.
More useful information can also be found here:
http://www.reedcorner.net/mmg/

TS4436 Why does my camera freeze then blur when I switch it to rear?

My camera hasn't been working for over a year. It is starting to bother me because I cannot use the rear side of my camera. I have gone deeper into this problem and a lot of people have the same problem too. I went to apple a few weeks ago and they told me to reset. It did not change anything. I really want to get this fixed because I take a lot of photos and that's hard to do if your camera doesn't work. My camera freezes then turns blurry when I switch to rear. I want to solve this problem asap. Thank you.

Are the source/destination patch controls correctly connected?

TS4436 I cant switch between cameras on my iphone 5 , the little switch button is gone

I can no longer switch from the front camera to the main camera, the little switch button is gone.

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

Looking for a way to switch views using Javascript

Hi ! I'm currently studying Acrobat 3D. I've got a PDF document with a 3D Annotation, which was imported from a U3D file. I defined 3 views : "initial", "front" and "top". My problem is that I'm looking for a way to switch views using Javascript. In fact, when I list cameras using the following code, I only get one camera called "DefaultView". So my question is : where has my "initial", "front" and "top" views been ? Is there a way I can switch between them using Javascript ? for(i=1;i<scene.cameras.count;++i) { Cam = scene.cameras.getByIndex(i); console.println("camera " + i + " : " + Cam.name); } Thank you very much in advance. françois

Are the dates on these entries correct??!! Doesn't seem like it. Anyway, just in case, here's some code to help:
//=========================================================
backgrounder = new RenderEventHandler();
backgrounder.onEvent = function(event)
runtime.removeEventHandler(this);
canvas = event.canvas;
background = canvas.background;
keyer = new KeyEventHandler();
keyer.onEvent = function(event)
switch (event.characterCode)
case 49:
cam = scene.cameras.getByIndex( 0 );
canvas.setCamera( cam );
break;
case 50:
cam = scene.cameras.getByIndex( 2 );
canvas.setCamera( cam );
break;
case 51:
cam = scene.cameras.getByIndex( 3 );
canvas.setCamera( cam );
break;
runtime.addEventHandler( keyer );
runtime.addEventHandler(backgrounder);
//inform user
console.println("Use the 1,2,3 Keys to toggle between cameras");
//===============================================

NAC : CAM control over switch using SNMP

Hi
I have CAM , CAS in Central, OOB,Virtual,Layer2 lab
I can see on CAM the access switch ports status which means that SNMP works but when a user is logged on the access switch , the user vlan is not inforced to be changed to Auth vlan
and he remains in the trusted vlan which is already configured on the acces switch
I can change in configuration on the switch through CAM but the CAM itself cant change Vlan
thanks to advise me what part i am missing
thanks

in the CAM, when you see the access switch ports status, click on the magnifying glass icon next to a port which is up and see if it's detecting the MAC address of the device which is connected to that port. If it is not it means that SNMP mac-notification is not configured properly. If CAM doesn't detect the MAC address of the device, it wont change the switchport vlan...

HT1695 Cant switch On Wi-Fi , Restart my Network settings , restart phone via Itunes nothing help

Hello ,
Can you please help me resolve this problem , or maybe its technical and i need phone service .
My Wi-Fi - OFF , and I cant switch ON
Found info on apple website , how to fix this problem - 1) Settings - Restart Network - didnt help 2) Restart IPhone - connected to ITunes - didnt help

If your iPhone suddenly freezes or is just not working right, you can do a hard reset by following these simple instructions:
Press and hold the Home button (big circle below the screen) and the Sleep/Wake button (on top of the iPhone) simultaneously.
Hold both buttons until the iPhone shuts off and begins to restart.

Beach Ball Switching Views

I have a very simple concert, only a couple channel strips & fx - switching views (layout/perform/edit) results in a 1 minute + freeze each time. It's really quite annoying.
I'm on a 3ghz Macbook Pro with 4gb Ram on 10.6.6

I tried both graphics settings, doesn't seem to be any difference. In fact, it just got worse! I just had to wait 5 minutes+ when switching from Perform to Layout....actually I thought it was done, but it's still frozen. Time for force quit.
I'm using the newest version of mainstage 2. I would think by version 2 there wouldn't be showstoppers like this, but I was wrong apparently.

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W.

I've been having an issue of connecting to wifi. I have restored and set up my phone as a new one and i still can't connect. Also i have restored my network setting also. The wifi button is still grey and i cant switch it on or off.

I've been having an issue of connecting to wifi. I have restored and set up my phone as a new one and i still can't connect. Also i have restored my network setting also. The wifi button is still grey and i cant switch it on or off.

Hi _Pchay,
Accordign to the artcle below, it looks like you have done all the troubleshooting steps and your next step may be to contact Apple Support.
iOS: Wi-Fi settings grayed out or dim
-Griff W.

When I republish my site the updates save to a different folder within public_html so it cant be viewed..... How do I change this?

When I republish my site the updates save to a different folder within public_html so it cant be viewed..... How do I change this?
My site is up and running but if i make changes on iWeb they get put in a new folder within the public_html folder. I then click on this and they are all showing in there but i have to manually move them to the correct folder for them to be shown on my website. The folder that is made is always named whatever I enter into the SITE NAME section on the screen where the ftp information is entered.
How can I get the updates to go directly into the public folder without it make a new folder? I have checked the settings but there isn't much I can see.
ALSO......
The names of the folders come up in the domain bar... how do i change this?
thanks
Charlotte

Try using the settings shown in the first example on this page...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
Note that the Directory/Path field is empty.
How to take the folder name out of the URL...
http://www.iwebformusicians.com/iWeb/URLs-Favicons.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

My MBP with RD's Facetime camera freezes when changing portrait to landscape during facetime calls on the display of the person who i'm calling to, but it shows alright on my side, what's going on?

My MBP with RD's Facetime camera freezes when changing portrait to landscape during facetime calls on the display of the person who i'm calling to, but it shows alright on my side, what's going on?
Another thing is that on Skype, whenever i clicked to sharescreen it only show a complete black out window. nothing else.
Tried restore OSX mountain lion, doesn't work. what should i do?

kaeandcolesmon,
If you open the recovery drive (partition) it should only have a single folder (Recovery).
To make sure that your not saving restore points to that drive.
See:
Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

My iphone 4s camera is getting switch off when i use

My iphone 4s camera is getting switch off when i use and when i use HDR function in the camera its getting switch off after taking picture and I wont see the picture where I have taken, can any one help me out in this or I should go to service center

Uninstall the app and reinstall it. If it persists dont use it. simple

Autorotate stops when switching view from popover

Hi guys. This is my first post here (on my first iOS app) so please be gentle
I have my iPad app set to Autorotate between both right and left home button landscape modes.
Everything seams to be working fine when i build and run. Auto rotation works and only admit landscape modes.
In my view controller i have a button linked to a popover with 4 other buttons to swich to 4 different views.
When i switch to any of those other views autorotation stops working.
All those views have the same code to accept autorotation:
- (BOOL) shouldAutorotateToInterfaceOrientation: (UIInterfaceOrientation) interfaceOrientation {
return (interfaceOrientation == UIInterfaceOrientationLandscapeRight || interfaceOrientation == UIInterfaceOrientationLandscapeLeft);
The popover also has that code and is displaying the buttons in the correct way when I rotate the screen. I assume that the popover is autoratating fine, but the rest of the view stays upside down.
I'm switching views from the popover with the following code:
- (IBAction)GotoView02{
View02ViewController *View02 = [[View02ViewController alloc] initWithNibName:nil bundle:nil];
[self presentModalViewController:View02 animated:NO];
Any ideas why autorotation stops working?

Same problem here, happening both in the simulator and on the device itself.
Have you found a solution yet?

Camera Freezes Cant switch Views

Similar Messages

Maybe you are looking for