Camera fuzzy image help

Camera has fuzzy image help

Hi there ladedah30,
You may find the troubleshooting steps in the article below helpful.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Camera isn't functioning
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W. 

Similar Messages

  • Photoshop won't open Raw images with my new Camera Canon 6D help! I use Photoshop CS5 extended version.

    Hello,
    I got a new camera and Photoshop and Lightroom won't open Raw images with my new Camera Canon 6D help! I use Photoshop CS5 extended version. and Lightroom 3

    Good news and bad news:
    The bad news is that you need CS6 or higher to open 6D RAWs. (The 6D didn't get support until Camera Raw 7.3; 7.0 premiered in CS6.) You can choose to upgrade (I'd recommend skipping CS6 and go straight for CC 2014 for $10/month) *OR*...
    ...the good news is that the DNG Converter can help you convert your RAWs into DNGs for use in CS5 and Lightroom 3.

  • Photoshop Elements Help | Processing camera raw image files

    This question was posted in response to the following article: http://helpx.adobe.com/photoshop-elements/using/processing-camera-raw-image-files.html

    gegjr wrote:
    When I selected "Save Image" there is an option to select the size of the JPEG preview. Is there anyway to extract the JPEG and does the JPEG contain the adjustments that were made to the Raw image?
    The "Save image" command just saves (really converts) the original raw into another raw format : the DNG format created by Adobe to get a universal raw format instead of a specific raw format for each camera in the range of each camera manufacters... Using that feature is your choice.
    And what you see in the bottom line : 8 bits or 16 bits has nothing to do with a preview, it is the choice of 'color depth' for the image the converters sends to the editor.
    So, your choice is either :
    - to click 'Done' which saves the settings of your conversion (white balance, exposure, clarity...) to a very small 'sidecar' file of the xmp type
    - to 'Open' in the editor where you can work with all features of the editor (which include saving the output file in any format - jpeg - psd - tiff - png...
    http://forums.adobe.com/thread/1030798?tstart=0

  • Camera raw images change colour in adobe bridge

    I have photoshop CS4 and import my camera raw images into Adobe Bridge.  When I view the thumbnails in bridge my raw images look vibrant and exactly like they appear on the camera but when I go to open them in camera raw edit they change colour and look washed out before I've made any changes.  Can anyone help me figure out how to correct this?

    ssprengel wrote:
    My camera is set to shoot sRGB JPGs and is set to all zeros for the brightness/contrast/saturation parameters.
    What is your camera set to as far as these basic toning settings, as well as any automatic things like DLighting or highlight compression and perhaps any custom curves or whatever that is called for Nikons?
    First paragraph - so is mine.
    Second paragraph - all other settings are neutral/zeroed/turned off, as per my post to which you responded. That is, no additional tone curves - Active D-Lighting turned OFF (why anyone would let the camera decide what to do do with highlights and shadows is beyond my level of trust) , Jpg compression is Optimal (least possible) et cetera.
    Think I now have an explanation for the different displays in ACR (and Bridge) that I have been experiencing. Took a new duplicate Jpg/Raw shot with the in-camera Picture Control set to Neutral. Now, when both the Jpg and .NEF Raw are viewed in ACR, with the ACR Camera profile set to Camera Neutral, they appear, ASAICT, identical. Saved Camera Neutral as the default ACR Camera profile. Now back in Bridge, the images also appear pretty much identical.
    I think what was happening previously was that I had failed to save Camera Standard in ACR as the default Camera profile, and it was defaulting to Adobe Standard, and hence it was rendering Raw thumbnails for Bridge to that Camera profile - hence the difference in appearance between the Jpg and Raw in Bridge. Unless I have got it completely wrong,  I think my problem is now solved.

  • Cannot open camera RAW images from Sony DSC-RX100M3 camera.  Working on a Mac in Photoshop CS5 and have camera raw 6.7.

    Cannot open camera RAW images from Sony DSC-RX100M3 camera.  Working on a Mac with Photoshop CS5 and Camera Raw 6.7?

    Bruce,
    When I made the transition to digital some 8 years ago, I had tremendous help from a number of well documented websites, among which:
    http://www.luminous-landscape.com
    I think a lot of stuff there to get you seriously going. Another one is:
    http://www.computer-darkroom.com
    I sold all my film based stuff, except a Nikon F3 and a handful of lenses and a Paterson developing tank.
    The Nikon suspiciously smells like foam mirror damping strips chemically decaying.
    I sold my enlarger over the internet. The word "enlarger" caused me to be on SpamCops blacklist for a while.
    I'm in this since the seventies, and I think you'll be as amazed as I was at the possibilities and control you have. And no more bags with $300 worth of film that's consumed in one shoot.
    Jump in both feet! you won't be sorry. And these forums are the best help you can get.
    Good luck,
    Rob

  • How to get network IP camera of images or media ?

    Please tell me how to use jmf to get network IP camera of images or media?
    if you can provide source code, send me please
    my e-mail: [email protected]
    thanks!!⊙ω⊙

    Hi
    m also doing almost same work..wht u r tryied to do. I got the JMF-code, which capture video from webcam & split it in to Frame. But don't know how to capture video from ip-camera.....Can u help me...???

  • Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN A

    Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN AT LEAST ONCE TO ACTIVATE THIS FEATURE. I wonder what that means?
    I use a lapto (windows 7) 64-Bit operating system.
    Thank you,
    my email is: [email protected], if you send me the answer to my query

    You need to activate Photoshop.
    Mylenium

  • Open Camera Raw Images From Sony DSC-RX100II in PE12

    No joy.  Please help.

    What version of the Camera Raw plug-in do you have in PSE12?  Use Help / About Plug-in / Camera Raw in the PSE Editor to find out.
    According to this list of supported cameras, you need at least ACR 8.2 for the RX100 II:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Using Help / Updates in the PSE Editor is the usual way to update to the latest ACR; however, the most current ACR is only compatible with newer OSes, so another question is what operating system do you have on your computer that is running PSE12?

  • Cannot open camera raw images in Mavericks

    cannot open camera raw images in Mavericks

    paulmhire wrote: cannot open camera raw images in Mavericks ... Mac OS X (10.7.4)
                                             ~~** Mac OS X (10.7.4) is NOT Mavericks.**~~
    •  If using Mac OS X (10.7.4), do the following:
    (1) Mac OS X (10.7.4):  Restart Mac, download and install OS X Lion Update 10.7.5 (Client Combo). 
    (2) install Digital Camera RAW Compatibility 4.06
    (3) If trouble continues, use your Mac's  > Software Update... menu command to see if newer updates are available.
    (4) If trouble continues after all Apple Updates are applied, contact your camera manufacturer for suggestions.
    •  If using Mavericks, restart Mac, download, and install the latest Digital Camera RAW Compatibility update.
       Use your Mac's  > Software Update... menu command to ensure your Mac software is up to date.
        If the trouble continues, contact your camera manufacturer.  They may have software for translating their RAW files.

  • Is the new iPad and iPod touch 5g have exactly the same iSight camera. because i heard read a lot in the apple site about the new iPad camera but the description for the new iPod touch is not so good IN TERMS OF CAMERA. so please help me

    is the new iPad and iPod touch 5g have exactly the same iSight camera. because i heard read a lot in the apple site about the new iPad camera but the description for the new iPod touch is not so good IN TERMS OF CAMERA. so please help me. coz i want to know is ipod touch 5g giving the new ipads like high clarity mages

    The ipod touch 5g and the new ipoad both have 5-mega pixal cameras.

  • Camera connection kit help,

    Hi I am trying to use camera connection kit to import photos using sd card but nothing happening. I can transfer my photos via i tunes as i have tried this but wanted to use the camera kit any help would be appreciated

    Most digital cameras use a standard naming format when they write photos to their memory cards, and the iPad and its camera connection kit only accepts that format i.e. directly off the root off the card should be a directory called DCIM, and underneath that are the photos, whose filenames should be exactly 8 characters long plus their file extension e.g. IMG_0001.JPG
    DCIM
         IMG_0001.JPG
         IMG_0002.JPG
    etc
    (Digital cameras quite often have another directory between the DCIM and the actual photos, but it's just the DCIM one that is important.)
    For direct transfer from your camera, you may need to change a setting on your camera - I know that some Canon DSLRs have a menu setting on them to enable 'PTP' (picture transfer protocol) on them, not sure about other makes.

  • My Earpiece doesn't work fine. I tried restoring it on iTunes, work's for 2 days then problem came again. Help me on this thanks.

    My Earpiece doesn't work fine. I tried restoring it on iTunes, work's for 2 days then problem came again. Help me on this thanks.

    Go buy yourself a iPhone 5. Sync your iPhone 3GS to iTunes on you computer so you have a back up ready to put on the iPhone 5. If you want you can update your iPhone 3GS with iTunes on your computer, but this is not necessary.

  • I created a photo album on my iPhone 4s - edited photos etc. but I cannot figure out how to transfer it to my pc (using Windows 8).  The only folder in the iphone drive is the one which has the Camera roll photos :( Help please - I really need the photos!

    I created a photo album on my iPhone 4s - edited photos etc. but I cannot figure out how to transfer it to my pc (using Windows 8).  The only folder in the iphone drive is the one which has the Camera roll photos Help please - I really need the photos!

    The camera roll is not part of the sync process at all.
    You should be importing these photos to your computer regularly as you would with any digital camera.  Youc an organize them on your computer and sync the to the iphone if you wish.
    The photos sync from the computer to the iphone is one way.
    The iphone mirrors the selected content of the computer to which it is synced.

  • I have just reinstalled Adobe Acrobat X1 and I can't save any PDF's that are emailed to me. I just get "This document could not be saves. There is a problem reading this document (21)" and then when I click OK i get "insufficient data for image"  Help!

    I have just reinstalled Adobe Acrobat X1 and I can't save any PDF's that are emailed to me. I just get "This document could not be saves. There is a problem reading this document (21)" and then when I click OK i get "insufficient data for image"  Help!

    More information about this issue can be found here:
    https://forums.adobe.com/thread/1672655
    A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
    Then download each of the individual updates and run them sequentially. 
    I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
    You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
    http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
    Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
    Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
    Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
    Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
    Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
    Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
    Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
    Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
    Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

  • The sound on my ipad 3 suddenly stopped working i dont know why i tried the last two days to fix it and also restored it and the sound never came back, please help.....

    the sound on my ipad 3 suddenly stopped working i dont know why i tried the last two days to fix it and also restored it and the sound never came back, please help.....

    Do you get sound on any apps e.g. Music and Videos but not others ? If you do then have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Maybe you are looking for