Camera - Gallery has stopped,after reseting no cam...

In my Nokia x2, whenever I tap camera it says ''Gallery has stopped'' and closes. after reseting the device there is no app named ''camera'', also tried hard reset & nokia software recovery tool for reinstalling software, but theres no change.
Please help.

Hi, Hridoi. When did this issue start? Did you successfully restore the phone's software? If you've done with all the possible troubleshooting procedures, I'd suggest taking your phone to our care center to have it fixed. Make sure to back up all the important files on it in case you decide to send it for repair. Visit this page for your local repair options: http://www.microsoft.com/en/mobile/support/locations/.

Similar Messages

  • TS1702 My camera app has stopped workin

    My camera app has stopped working when I press the app nothing happened it just seems to close down the iPad. Can you advise how to fix this

    Have you tried closing the Camera app completely and seeing if it works when you re-open it ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Camera RAW has stopped working - says requires that a qualifying product has been opened at least once. I am a fully up to date CC 2015 subscriber. It was working fine previously.

    Camera RAW has stopped working.  Says CR editing is not enabled.  Requires a qualifying product opened at least once.  PC CC, Bridge and Lightromm all work.

    We're only up to CC 2014 right now. 
    Are you using Bridge to open up the RAW?

  • IPhone 4 has restrictions after resetting;

    iPhone 4 has restrictions after resetting; cant get texts from people unless they have iPhone. How do I clear this restriction?

    Hi there DMarshall1985,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    -Griff W. 

  • Time Machine stops after reset in OS X 10.9 ? What is the solution ?

    Time Machine stops after reset in OS X 10.9 ? What is the solution ?

    Time Machine shows the time of the last backup and it shows a MB-count while backing up.
    So it seems to work. Only the Time Machine symbol does not work.
    Thanks for your tip.
    Greetings, AlbertenHelma

  • My lightening to sd card camera reader has stopped working

    My lightening to SD card reader has stopped working. Any idea why?

    I am using it just as before and with the same camera and SD card. I have reset my iPad as you suggested, but I still get the same message "This cable or accessory is not certified and may not work reliably with this iPad"
    I bought it from Amazon Uk last year. Have I been sold a counterfeit item?
    Thanks for your help.

  • Camera problem in 501 after reset

    Please help me.
    I updated my phone(asha 501) a few days ago. I reset my phone today. After reset when i capture an image the preview goes to the left. But when i open gallery it's vanished. I checked the files also but didn't find the photo. For every image after reset this case is happening.
    Please give me sollution.
    Solved!
    Go to Solution.

    I solved my problem myself. I reset my phone again and restored the backups again. Now i can see the images in the gallery.

  • Video has stopped after downloading Microsoft offi...

    Today I installed Microsoft Office and ticked link to Skype option. Since then my skype video has stopped coming in and cannot make video calls. How do i fix this?

    Hi,
    I recall that a microsoft office for mac update actually did something deletarious to the printer files, but I don't recall how to repair or troubleshoot the problem.
      Check your printer manufacture for drivers (software). Perhaps installing new may help.
    Carolyn 

  • 6500 Slide Camera Flash has stopped working

    I was just about to take a photo...
    and my double led flash light has stoped workin
    iv tried putting it on and off
    also put it on automatic
    and it seems the lights wont work anymore
    can this be solved

    what exactly do you mean? do you mean when taking photos outdoors or in brightly lit conditions, then of course the flash will not fire as the available light is more than enough to fill the aperture of the camera. if you are talking about the flash not firing in low light or night conditions, then you have a problem on your hands.

  • Updated software on my mac and after reset it came up with 2 hard drives

    one was a back up mistakenly I have clicked that now I don't know what to do help please I'm stressed I have gone into the utility fix thing says my files are there but I can't do anything else the tool bar at the bottom isn't even there
    I really need help

    What did it call the two hard drives?  Was one macintosh hard drie and the other recovery hard drive?  If you cannot click Restart, try turning the power off, what a few seconds, then power up again holding the Opt key.  You will get an image of the available hard drives, after the little gear stops spinning select the macintosh hard drive, your normal boot drive, and proceed to boot.

  • My interface has disappeared after resetting preferences

    iMac
    CS5 Illustrator
    Held down cmmd, shift, alt to delete preferences, after opening up a previous document all my tools are gone (unable to pull them out from the dropout menu), as well as options for effects, and well.....everything. How can I get it all back?

    mhossey,
    Cmd+Option+Shift should reset the preferences to the defaults rather than remove them, of course.
    Ultimately, you may have to uninstall, run the Cleaner Tool, and reinstall, see 6) below, but you may try other things, such as 4) on the list below.
    Less likely, everyone has escaped to the sides, in which case you may increase the screen resolution to see them and round them up in the middle and then decrease the resolution again.
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • Camera profiles are gone after update of Camera Raw

    Hi,
    After an, automatic, update to camera raw 7.3 in Photoshop Elements 11 all Camera Profiles are gone. All that is left is "Matrix". Can someone please help me?
    I use Elements 11, windows Vista on a 64-bit machine, my camera is a Nikon D7000.
    Thanks!

    Do you have Photoshop CS6 installed on same machine?
    You can install the DNG converter from:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5519
    This will restore all camera profiles on your machine

  • Wifi just has stopped after 10-15 minutes

    Hi all!
    I've just noticed a strange things on my iPhone4. When I use wifi (browsing on Safari, using mailbox, etc.) after 10-15 minutes (sometimes less or more) the Internet traffic just got stop. The wifi's icon is still there the downloading circle is there and circleing but no data is coming, is not refreshing page, is not sending mail.
    This time I need turn off and on wifi at the settings and after is everything is ok again.
    Any clue what is this and why?

    I suffer from the same phenomenon.
    every 10-20 minutes the wifi icon is still there, but there is no internet/mail/other apps connection. the circle keeps revolving but to no avail.
    the only thing that helps is on/off on the wifi (and wait a bit because if you don't wait it will not connect to the wifi) or reset your iphone.
    I did the following:
    ====================
    - no Cellular data,
    - no 3G data,
    - so ONLY Wifi data.
    this is driving my crazy as i need to use my iphone this way a lot of the times, streaming or using apps via Wifi uses much less battery!
    does anybody have a clue?

  • Generic camera thumbnails still appear after you install Camera Raw 3.x update (Adobe Bridge 1.x)

    Before posting a new topic about this, check the following link to see if it resolves your issue.
    http://www.adobe.com/support/techdocs/331596.html
    Thanks
    Shane
    Adobe Tech Support

    > im positive the plug in is in the right place
    Hmmmm. Does the path to that place begin at the root level, i. e. with the NameOfYourHardDisk?
    If it begins with "YourUsername", it's in the wrong folder.
    CORRECT:
    NameOfYourHardDrive//Library/Application Support/Adobe/Plug-ins/CS2/File Formats/
    From the "Debugging" thread in the ACR forum:
    The new location for Adobe Camera Raw 3.x is:
    Mac: /Library/Application Support/Adobe/Plug-ins/CS2/File Formats/
    Note: that the Library folder referred to above is that found at root level and NOT the User/Library folder.
    Adobe Camera Raw Forum [CLICK HERE]

  • Lumia 920 camera suddenly not working after app up...

    I have had yellow Lumia 920 now for about 3 weeks and everything worked just fine. Yesterday evening (european time) I saw update reminders on the "shop" tile and there were 3 or 4 of them (Nokia drive+ and some others that I don't remember). I was doing something and didn't give a thought but just let the updates to be downloaded and installed and they went fine as far as I know. Today when I tried to take photos the camera suddenly dosen't work anymore. No matter if I click the hardware button or the camera app tile, it just flip back to live tiles. Camera doesn't work on Bing search either and not on any apps that utilized the camera.
    I wonder if anyone else have this problem or what I should do next... I have restart the phone a few times but it didn't help... I haven't hard reset it because I have so many stuff in the phone, if there is a easy way to do it I rather not hard reset it...
    Any suggestions are greatly welcome!

    I have the same problem. I am not sure if an app update is what caused this, but my camera on my new Cyan Nokia Lumia 920 has stopped working. I took two photos yesterday, but when I tried to take some today my camera was a completely black screen with the bottom buttons grayed out and the top bottom to view recent pictures highlighted and still working. I don't know what to do because I purchased this phone off of Ebay and everything worked fine after I purchased it. I'm hoping I didn't get a faulty phone. 
    I have tried everything.... soft reset, deleting all the camera apps, and tried to reset the camera. I want to avoid doing a hard reset because it bricked my last Nokia and I don't want that to happen. 
    The only way I can use my camera is through an app, Nokia Glam Me. But it only uses FFC (front facing camera) 
    I don't know what else I should do. 
    Help. Please... 

Maybe you are looking for

  • 831 router....'loading cisco router web setup. please wait'

    We just received a used 831 from our other office. I put in http://10.10.10.1 then click continue for the language. It comes to a screen that reads: 'Loading Cisco Router Web Setup. Please Wait...' thats as far as it will go. I'm not sure where to st

  • Can I correct Java error on a webpage

    As part of my work I have to search a vendors knowledgebase for issues. I was able to do this before I got a new laptop. Now I get a Java error. Here's the information I have: After searching I get a screen of hits. When I position my cursor over an

  • Binary and icon for submission question

    Hi, I have a few days left until i submit my first iphone application. In the itunes connect developer documentation, there's a pragraph regarding the icons i should supply. In one of the descriptions it says that the 57X57 icon should be supplied wi

  • Can't change Run as account in the Host Access tab for a clustered host

    Gentlemen, we have a bunch of Hyper-V clusters added to hyper-V and most of them have a run as account assigned to them, which we don't want to keep (they were added with a domain admin user). However, I'm not able to change it on the clustered host

  • Waiting it out for new ACD revisions?

    I am on the edge of splurging for either a new 23 or 30 inch ACD, but I would kill myself if I bought one right before a big revisions. I have read the rumors and all, but I still have absolutely no idea what to do. To go for it, or to wait. Any sugg