Camera guy needs help with his first build

Hello all-
I work in a video rental house, and I'm sick of renting out $13,000 cameras and $16,000 lens packages all the time and not having the capability to get the gear for free and make my own projects on my own time!  To that end, I'll happily trade any video camera / production knowledge for advice on this build I'm working on.
I’ve put together this modest $3,000 build list for a Premiere CS5 / After Effects CS5 machine.  This will be my first build, so I’m somewhat new to this, and I’d like to solicit the board’s input on the following questions:
1)      What do you think of my MOBO / CPU / RAM pairings?  I’m not really married to any of these components, and if I should swap any one of these out for overall performance increases, I’d be happy to.
2)      How does my drive setup look?  Have I picked any clunkers?
3)      I’d love to hear any alternate suggestions for 20inch or so monitors in the $150 range, or quality desktop speakers in the $100 range.
DISK SETUP- $640
            System / Boot disk – 600 GB Western Digital Velociraptor / SATA 6.0 / 10,000 RPM
            Project / Media disk – (2) x 1TB Samsung Spinpoint F3R / RAID 0 / SATA 3.0 / 7,200 RPM
            Render / Scratch disk – (4) x 500GB Western Digital Caviar blue / RAID 0 / SATA 3.0 / 7,200 RPM
(MOBO raid only- No hardware RAID card – not in my budget right now)
GUTS- $1,137
            CPU- i7-950 Bloomfield 3.06 GHz / Noctura NH-D14 CPU cooler
            GPU- Galaxy NVDIA GTX470 1.28 GB
            RAM- 24GB (6 x 4GB) G.SKILL Ripjaw DDR3 1333 / 9-9-9-24
            MOBO – ASUS Rampage III 1366 pin X58
CASE / POWER - $595         
            Case - Silverstone RV02B-W
            PSU – ABS MJ1100-M / 1100 Watt / Single 12v rail
            UPS – Powercom KIN- 2200AP / 2200 VA / 1320 Watts
HUMAN I/O – $485
            Speakers- Behringer MS16
            Mouse – Kensington Expert Trackball
            Keyboard – Logitech Wireless K340
            Monitors – (2) x Acer G235HAbd 23” / 1920x1080 / 20” or larger / around $150
Thanks for any input.
-Leo

Leo,
Nice system specification! Like Harm, I don't have much to suggest - only a comment on the keyboard!
I personally went with the Logitech K800, which is also wireless, after comparing it with the K340 in a store that had both on display. I preferred the feel of this more expensive model and am still very happy with the purchase 6 months later. The K800 also adds backlighting which I love for editing in a dimly lit room.
Jim

Similar Messages

  • I need help with the conditional build tag option RoboHelp 10

    I need help with the conditional build tag option. I want to apply CBT to content in a topic. I looked at the Help topics and believed that I applied the feature correctly. Howver, it is not working as desired. In the 2nd sentence below I want the text highlighted in blue to only appear for the printed output and the text printed in purple to only appear for the .htm /online output. Please help.
    There are common tasks used to manage the folders in the Navigator and the folders
    in the BBS Folders Viewer Grid. For more information on these common tasks see Help
    and Support in Success Enterprise. click the links below.

    Hi there
    Using tagging is a two part process.
    Part One
    You create and apply the tags to the information you wish to control.
    Part Two
    You create a Build Expression that is used when you generate your output. The Build Expression typically reads something like: NOT Tag1 (or whatever your tag name is)
    Then when you generate and use the Build Expression, the information tagged is not included in the build.
    Cheers... Rick

  • Hi guys need Help with Displaying Splash Screen?!!?

    Hi Guys.
    Sorry for the last incomplete post my mistake!
    I need help displaying a splash screen as an advertisment or something before i have my main application run.
    Here is the code i wrote (it works as if it were a seperate application)
    package MajourProject;
    import java.awt.AWTException;
    import java.awt.Dimension;
    import java.awt.Robot;
    import java.awt.Toolkit;
    import javax.swing.ImageIcon;
    import javax.swing.JLabel;
    import javax.swing.JOptionPane;
    import javax.swing.JProgressBar;
    import javax.swing.JScrollPane;
    import javax.swing.JWindow;
    * @author Matt
    public class SplashScreen extends JWindow
        public SplashScreen()
            int UpTime = 20000;
            Start(UpTime);
        public void Start(int UpTime)
            ImageIcon ii = new ImageIcon("src/1.jpg");
              JScrollPane jsp = new JScrollPane(new JLabel(ii));
                    JProgressBar Bar = new JProgressBar();
              getContentPane().add(jsp);
              setSize(853,303);
              centerScreen();
              setVisible(true);
                   try
                                Thread.sleep(20000);
                               dispose();
                   catch(Exception IE)
            private void centerScreen()
                    Dimension d = Toolkit.getDefaultToolkit().getScreenSize();
                    int x = (int) ((d.getWidth() - getWidth()) / 2);
              int y = (int) ((d.getHeight() - getHeight()) / 2);
              setLocation(x, (y-100));
           public static void main(String [] args)
                 new SplashScreen();
    }but i now have a problem as i already have a main application done as i wrote this seperately. I now need to combine the two together. So what i did was in my Main Application wrote:
    Splash_Screen SS = new Splash_Screen();it then runs my Splash Screen class which i re-wrote to look as such:
    package MajourProject;
    import java.awt.AWTException;
    import java.awt.Dimension;
    import java.awt.Robot;
    import java.awt.Toolkit;
    import javax.swing.ImageIcon;
    import javax.swing.JLabel;
    import javax.swing.JOptionPane;
    import javax.swing.JProgressBar;
    import javax.swing.JScrollPane;
    import javax.swing.JWindow;
    * @author Matt
    public class SplashScreen extends JWindow
        public SplashScreen()
            int time = 15000;
            Start(time);
        public void Start(int UpTime)
            ImageIcon ii = new ImageIcon("src/1.jpg");
              JScrollPane jsp = new JScrollPane(new JLabel(ii));
                    JProgressBar Bar = new JProgressBar();
              getContentPane().add(jsp);
              setSize(853,303);
              centerScreen();
              setVisible(true);
                   try
                                Thread.sleep(20000);
                                dispose();
                   catch(Exception IE)
            private void centerScreen()
                    Dimension d = Toolkit.getDefaultToolkit().getScreenSize();
                    int x = (int) ((d.getWidth() - getWidth()) / 2);
              int y = (int) ((d.getHeight() - getHeight()) / 2);
              setLocation(x, (y-100));
    }it obviously runs the default constructor which then runs the other methods in the class but it doesn't seem to show can anybody help me to find out whats wrong? It seems to be there just before the main application launches but only for a split second. And when i am waiting while the thread is sleeping the area i have defined the Content pane for he cursor goes to the loading icon! I don't know if this makes any sence to you but if you can help me it would be most apreciated.
    Thanks.

    SpearOne wrote:
    Hi Encephalopathic
    why would it work if i put it in it's own application surely it wouldn't be caused by this thread.sleep?? everything after it is in fact put to sleep. In its "own" application, nothing happens after it is displayed.
    if it is the problem then could you please give me some code to add quickly to test??
    import java.awt.Dimension;
    import java.awt.Toolkit;
    import java.awt.event.ActionEvent;
    import java.awt.event.ActionListener;
    import javax.swing.ImageIcon;
    import javax.swing.JFrame;
    import javax.swing.JLabel;
    import javax.swing.JProgressBar;
    import javax.swing.JScrollPane;
    import javax.swing.JWindow;
    import javax.swing.Timer;
    public class SplashScreen extends JWindow
      private static final String IMAGE_PATH = "src/1.jpg";
      private static final int UP_TIME = 15000;
      public SplashScreen()
        Start();
      public void Start()
        ImageIcon ii = new ImageIcon(IMAGE_PATH);
        JScrollPane jsp = new JScrollPane(new JLabel(ii));
        //JProgressBar Bar = new JProgressBar();
        getContentPane().add(jsp);
        setSize(853, 303);
        centerScreen();
      private void centerScreen()
        Dimension d = Toolkit.getDefaultToolkit().getScreenSize();
        int x = (int) ((d.getWidth() - getWidth()) / 2);
        int y = (int) ((d.getHeight() - getHeight()) / 2);
        setLocation(x, (y - 100));
      public static void main(String[] args)
        final JFrame frame = new JFrame("Main Frame");
        frame.setPreferredSize(new Dimension(300, 200));
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.pack();
        frame.setLocationRelativeTo(null);
        final SplashScreen splash = new SplashScreen();
        splash.setVisible(true);
        Timer swingTimer = new Timer(UP_TIME, new ActionListener()
          public void actionPerformed(ActionEvent e)
            splash.dispose();
            frame.setVisible(true);
        swingTimer.setRepeats(false);
        swingTimer.start();
    }

  • Hello guys need help with reverse array

    Need help reversing an array, i think my code is correct but it still does not work, so im thinking it might be something else i do not see.
    so far the input for the array is
    6, 25 , 10 , 5
    and output is still the same
    6 , 25 , 10 , 5
    not sure what is going on.
    public class Purse
        // max possible # of coins in a purse
        private static final int MAX = 10;
        private int contents[];
        private int count;      // count # of coins stored in contents[]
         * Constructor for objects of class Purse
        public Purse()
           contents = new int[MAX];
           count = 0;
         * Adds a coin to the end of a purse
         * @param  coinType     type of coin to add
        public void addCoin(int coinType)
            contents[count] = coinType;
            count = count + 1;
         * Generates a String that holds the contents of a purse
         * @return     the contents of the purse, nicely formatted
        public String toString()
            if (count == 0)
                return "()";
            StringBuffer s = new StringBuffer("(");
            int i = 0;
            for (i = 0; i < count - 1; ++i)
                s.append(contents[i] + ", "); // values neatly separated by commas
            s.append(contents[i] + ")");
            return s.toString();
         * Calculates the value of a purse
         * @return     value of the purse in cents
        public int value()
            int sum = 0; // starts sum at zero
            for( int e : contents) // sets all to e
                sum = sum + e; //finds sum of array
            return sum; //retur
         * Reverses the order of coins in a purse and returns it
        public void reverse()
           int countA = 0;
           int x = 0;
           int y = countA - 1;                                          // 5 - 1 = 4
           for (int i = contents.length - 1; i >=0 ; i--)                        // 4, 3 , 2, 1, 0
                countA++;                                             // count = 5
            while ( x < y)
                int temp = contents[x];
                contents[x] = contents [y];
                contents [y] = temp;
                y = y- 1;                                         // 4 , 3 , 2, 1 , 0
                x = x + 1 ;                                             // 0 , 1,  2  , 3 , 4
    }

    ok so i went ahead and followed what you said
    public void reverse()
          int a = 0;
          int b = contents.length - 1;
          while (b > a)
              int temp = contents[a];
              contents[a] = contents;
    contents [b] = temp;
    a++;
    b--;
    }and its outputting { 0, 0, 0, 0}
    im thinking this is because the main array is has 10 elements with only 4 in use so this is a partial array.
    Example
    the array is { 6, 25, 10, 5, 0, 0, 0, 0, 0, 0,}
    after the swap
    {0, 0 , 0 , 0, 0 , 0 , 5 , 10 , 25, 6}
    i need it to be just
    { 5, 10, 25, 6}
    so it is swapping the begining and end but only with zeroes the thing is i need to reverse the array without the zeroes                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Need help with Campus LAN building design

    Hey everyone,
    I'm currently studying in a program at College call Internet Communications Technology. I am working on a final project in my Physical layer class. Basically the final project is to design the telecom closets and network infastructure for a 3 level building.
    We never really covered the capabilities of certain cisco hardware so I'm looking for a little guidance in what to select.
    Basically we have between 300 - 400 people on each level. So we require 1148 cables. We need an additional 134 PoE connections for our phones and WAP's  I was going to VLAN each floor and then use VLANS on the floors themselves.
    On the main floor we will accept the fiber from the main section of the campus for the internet access and branch that out to the other telecom closets in the building using a single mode fiber cable.
    I was taking a look at some gear and this is where I am confused. I will require 1 fiber input from the campus and then I need 3 switches on each floor accepting fiber as there are 3 major areas on each floor. So each end of the floor has an auditorium with 170 people and then the middle.
    I was looking at using the Cisco Catalyst 2960-48PST-L - switch - 48 ports - managed - rack-mountable for our access layer switches in the telecom closets at the end... But I'm not really sure what to use for our core/distribution gear so I believe I would need 1 router on the main floor which can do all the interVLAN routing via fiber links between floors but then I would require a router on both floors 2 and 3 for the interVLAN routing on each floor. I would then need 3 main distribution switches on each floor. The switches I'm thinking could be smaller port based like a 12 or 24 port based switch as they would really just be there for accepting the fiber link from the main router on the first floor and branching that to the other telecom closets on the floor.
    Just looking for a little guidance here.
    Thanks everyone,
    Mike

    I'd recommend you have a look at the Cisco Smart Business Architecture designs: http://www.cisco.com/en/US/netsol/ns982/networking_solutions_program_home.html#lan
    Specifically see the LAN Deployment Guidefor advice on choosing the right type fo switch for the various layers.
    As a general guideline, I don't see anyone these days putting in routing away from the core in a campus (nor would I generally recommend it).

  • Need help with new 8310

    Just upgraded from earlier blackberry and have two problems I need help with!
    First, in rearranging the icons my browser icon disappeared and I can't get it back even when I use the show all function.  Any ideas?
    Second, unlike my earlier blackberry, messages I sent from my office laptop are not appearing in my messages.  What setting do I need to tweak?  I like my blackberry to show all the messages sent from or received by the laptop.
    Thanks.
    Lauren

    My BB setting was to not hide sent messages, but the problem I think has to do with the settings on syncing with my computer.  Messages I send from the blackberry show up as sent - but I want the BB to match completely with the email on my computer - show every email received and every email sent.  That was how the old BB was set up.  Any ideas on what else to tweak either on the desktop or the BB?  Thanks for your help.

  • HOW DO YOU GUYS DEAL WITH APPLE.. SO CONFUSING...NEED HELP WITH SPECS FOR PURCHASE OF IMAC 21.5

    Hi guys, been reading your forums, blogposts, etc and am getting more confused.  I'm just a video girl trying to produce meaningful content through web videos for small to mid sized businesses and want to come over from the dark side. 
    Good news,, I dont need a super giant system,  I do simple editing for web videos, minimal graphics, no motion graphics, no animation etc. currently using CS4, will probably end up with 5.5.
    I want to get imac 21.5 or 27 if i have to..  So here's the question we all have,,, what do I really need besides an Apple fairy godmother to figure this crazy stuff out?????
    I want to be able to have firewire add on, but the rest is what I need help with.   So i've been looking at cs6 specs, even though im not there yet, eventually will be,, so just need to run cs4 now and build from there.  I also want to eventually move to final cut down the road so I want imac able to upgrade to final cut.
    WHAT DO I REALLY NEED MINIMALLY FOR NOW?  WHAT CAN I GET LATER IF i CHOOSE TO DO MORE AND NEED MORE POWER?
    cs6:
    Multicore Intel processor with 64-bit support
    Mac OS X v10.6.8, v10.7, or v10.8**
    4GB of RAM (8GB recommended)
    4GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
    Additional disk space required for preview files and other working files (10GB recommended)
    1280x900 display
    7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended)
    OpenGL 2.0–capable system
    DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
    QuickTime 7.6.6 software required for QuickTime features
    Optional: Adobe-certified GPU card for GPU-accelerated performance
    Any responses would be great.  I know you guys are busy answering the really high end tech questions

    All the current iMac models (both 21.5" and 27" with OS X Mt. Lion 10.8) will run CS4, 5.5 and 6 just fine.  They will also run Final Cut Pro X just fine.  Ditto for most any application you may want to use.
    Below are some notes (specific to your apparent requirements) that may help you with your purchase decision:
    Notes on purchasing a 21.5" iMac
    All 21.5" iMacs come with 8GB RAM but you cannot add more later.  I strongly suggest getting the maximum RAM (16GB) when you order the iMac.
    The basic hard drive is a 1TB 5400rpm drive.  It will work fine with Adobe CS but you will probably want the added speed of the optional 1TB Fusion drive for better performance. Some people will recommend/argue for one of the optional SSD drives instead, but they are very expensive and still only come in relatively small capacities - I don't recommend the SSD drives.  Get the Fusion drive and spend any extra money on a good external hard drive for backup and/or extra storage instead of an SSD.
    Notes on purchasing a 27" iMac
    All 27" iMacs come with 8GB RAM and you can add more later, up to 32GB
    The basic hard drive is a 1TB 7200rpm drive - it will be fine with Adobe CS.  There are upgrade options to a 3TB 7200rpm drive or a 1TB or 3TB fusion drive - these will be fine also.  There are also SSD drive options, but I do not recommend them. (Same comments as above.)
    Notes on all the current iMacs
    iMacs no longer come with built-in CD/DVD drives.  If you need one, you will need to purchase the Apple Superdrive accessory drive ($79)
    All of the iMac graphic processors (GPU's) are compatible with Adobe CS 4, 5.5, 6
    It is very difficult to impossible to change or upgrade the hard drive later on, so don't buy low-end thinking you can add a better internal hard drive later.
    Be aware that Macs always come with the latest (most recent) version of OS X.  And OS X Mavericks (10.9) is due to be released soon (in the next month or two).  There is no guarantee that the older Adobe CS 4 or 5.5 versions will run on OS X Mavericks.  If you cannot upgrade to CS 6 in the near future, you may want to purchase now rather than after OS X Mavericks is released.
    For what it's worth, I'd recommend the 27" iMac if your budget can afford it.  You will appreciate the larger screen size and added capabilities over the years you will use the computer.

  • TS2771 I need help with my camera it's shows a black screen. And I have restarted it many times

    I need help with my camera it's shows a black screen. And I have restarted it many times

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Y are not alones. Sometimes the camera fails.
    Apple Retail Store - Genius Bar                                      

  • Need help with CS4 transitions

    Hi,
    I am trying to use a cross dissolve transition. To make it simple, I have two clips. I'm obviously doing something wrong here. I've watched the Adobe TV tutorial and all the guy does is to select cross dissolve from the effects box, and drags it over to the clip on the timeline. I think I am doing the exact same thing, but when I play my clip back, I can see no transition effect played back.
    Maybe I'm putting it in the wrong place I thought, so I tried putting it in front of the split between the two clips. Then again at the beginning of the second clip. Neither of them worked, so I shut CS4 down, and booted it up again. I started a new project, and put two new clips in it. I put the dissolve transition at the beginning of the second clip, and it worked like a charm. Then to see if that was a fluke, went to a point about 3 minutes earlier in the timeline. So now I am on clip one. I go and make a cut in the timeline, and try to place another Cross dissolve at this spot. It appears to place the transition there because it creates the rectangular box, and it has the name cross dissolve in that rectangular box,but when I try to play it to see the transition, it isn't working. Go back to the beginning of the second clip, and that one still works perfectly.
    I noticed that there is a difference in the appearance of the two cross dissolve rectangular boxes. The one that works has a single diagonal line that goes from lower left to upper right in the cross dissolve box, and then there are a whole series of diagonal lines that go from upper left to lower right all across the cross dissolve box . It looks like a whole bunch of dark gray and white backslashes. In the one that doesn't work, there is just that single diagonal line that goes from lower left to upper right. No backslashes on this one. What am I doing right in the first one, but not in the second?
    I find that it will work perfectly if I put in a new clip. If I put in the Cross Dissolve at the beginning of a new clip that I add to the timelime,  it will work perfectly. It is only when I try to split a clip that is already on the timeline, and then put the cross dissolve in at that point.
    Perhaps it is not possible to do what I am attempting to do. Maybe you can't split a clip and place the transition at that point?

    When I am shooting video, it is not unusual for me to be taping a scene of a mountain, for example, and then put the camera on pause, while I briefly position myself to take video of the river that is flowing at my feet. That is what is happened on this clip that I am attempting to put the transition in between. Rather than having the scene just instantly change at this point, from the mountain to the river, it would be nice to have a smoother transition then that.
    My mind was working on the problem while sleeping last night, and I think I might understand how to handle it. It might have been too simple for me to think about yesterday. I haven't tried it yet, but would it not work, to insert the mountain scene from my source monitor into the timeline, and then go back and insert the river scene into the time line instead of inserting both of them at the same time. Would these not now be two separate clips on the timeline, and the transition could now be applied?
    Your analogy with the DJ is very good, but it isn't quite the same. You are correct in that he would be only fading from one song to the same spot on the same song. In my case I am going from an image of a mountain to an image of a river. Same clip, but different images. I appreciate the help, and your thoughts.
    Terry Lee Martin
    Date: Sat, 22 Aug 2009 23:15:55 -0600
    From: [email protected]
    To: [email protected]
    Subject: Need help with CS4 transitions
    From a creative standpoiint, I don't understand the desire to transition from one clip to the exact same spot on that same clip.  That's like a DJ at a night club fading from one song to the exact same spot on that same song being played on a second CD player.  What's the point?
    >

  • Need help with a currently "in-use" form we want to switch to Adobes hosting service

    Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of.  I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our  "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit"  issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
    We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
    I need to get this right and working for the majority of my users and on any platform and OS.
    You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
    (and you will probably get right to me, unlike my and I'm sure most other folks',  "Adobe phone-in experiences")
    Thank You,
    Michael Corman
    VinylCouture
    Phenix City, Alabama  36869

    Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
    So  I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself,  I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products"  to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
    OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi  & so on)...and if you are still on my site.. go to any  "GO RIGHT TO OUR ORDER PAGE"  button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is,  how do they select their individual colors within that (whatever) pack?... .
    So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a  " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
    So after thinking this all out,  and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
    Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year,  I think...its called http://pdf-fillableforms.com/.
    A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however,  if you're on MAC OSX or similar...
    I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
    OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending"  with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly,  and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add)..,  except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form....  Many folks report to us the following issues that we know of.  First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
    Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
    It almost always generates some kind ( at least one time)  of "error message" which we do warn them about..., telling one,  basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it...  and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
    Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly,  the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4)  If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
    Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that?  Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
    Michael Corman
    VinylCouture.com
    (706) 326-7911

  • Need help with Template - unbalanced #EndEditable tag

    I am unable to use this template to create a new page and get the "unbalanced #EndEditable tag" error.
    If I open the file independently it looks great - otherwise I get the error.
    Code for internal_students.dwt
    There is an error at line 45, column 79 (absolute position 2188)
    <div id="metanav"><!-- #BeginLibraryItem "/Library/metaNav.lbi" -->
    <p><a href="../Library/contact/index.html">Contact Us</a></p>
    <!-- #EndLibraryItem --></div>
            <div id="navigation">
                <div id="navigation_l">
                    <div id="navigation_r"><!-- #BeginLibraryItem "/Library/mainNav.lbi" --> <ul>
                            <li><a href="../index.html" class="first"><img src="../images/spacer.gif" alt="CAITE Homepage" width="75" height="20" border="0" /></a></li>
                            <li><a href="../about/index.html">About</a></li>
      <li><a href="../news/index.html">News And Events</a></li>
      <li><a href="../educators/index.html">For Educators</a></li>
      <li><a href="../students/index.html">For Students</a></li>
      <li><a href="../industry/index.html" class="last">For Industry</a></li>
                        </ul>
    <!-- #EndLibraryItem --></div>
    I need help with this as the site and templates were created 2/3 years before I arrived on the job.
    Thank you
    Cheryl

    Okay
    - This is on-line page  http://caite.cs.umass.edu/students/index.html
    If you want code from template here it is:
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="/Templates/internal_about.dwt" codeOutsideHTMLIsLocked="false" -->
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1" />
    <!-- InstanceBeginEditable name="doctitle" -->
    <title>CAITE - Commonwealth Alliance for Information Technology Education</title>
    <!-- InstanceEndEditable -->
    <!-- InstanceBeginEditable name="head" -->
    <meta name="Description" content="Commonwealth Alliance for Information Technology Education (CAITE) to design and carry out comprehensive programs that address under representation in information technology (IT) education and the workforce. CAITE will focus on women and minorities in groups that are underrepresented in the Massachusetts innovation economy" />
    <meta name="Keywords" content="Commonwealth Alliance for Information Technology Education CAITE Massachusetts women minorities information technology IT" />
    <meta name="robots" content="all, index, follow" />
    <meta name="revisit-after" content="14 days" />
    <meta name="author" content="Outreach Web Team" />
    <!-- TemplateBeginEditable name="head" --><!-- TemplateEndEditable --><!-- InstanceEndEditable -->
    <link rel="shortcut icon" href="/images/favicon.ico" />
    <script type="text/javascript" src="../scripts/jquery.js"></script>
    <script type="text/javascript" src="../scripts/jquery.easing.js"></script>
    <script type="text/javascript" src="../scripts/jquery.pngfix.js"></script>
    <script language="JavaScript" type="text/JavaScript">
        <!--
        $(document).ready(function() {
            $("img[@src$=png], div#wrapper_l, div#wrapper_r, div#whatsnew").pngfix();
        //-->
    </script>
    <link href="../css/screenstyle.css" rel="stylesheet" type="text/css" media="screen" />
    <link href="../css/printstyle.css" rel="stylesheet" type="text/css" media="print" />
    </head>
    <script type="text/javascript">
    var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
    document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));
    </script>
    <body>  
        <div id="wrapper">
            <div id="metanav"><!-- #BeginLibraryItem "/Library/metaNav.lbi" -->
    <p><a href="../Library/contact/index.html">Contact Us</a></p>
    <!-- #EndLibraryItem --></div>
            <div id="navigation">
                <div id="navigation_l">
                    <div id="navigation_r"><!-- #BeginLibraryItem "/Library/mainNav.lbi" --> <ul>
                            <li><a href="../index.html" class="first"><img src="../images/spacer.gif" alt="CAITE Homepage" width="75" height="20" border="0" /></a></li>
                            <li><a href="../about/index.html">About</a></li>
      <li><a href="../news/index.html">News And Events</a></li>
      <li><a href="../educators/index.html">For Educators</a></li>
      <li><a href="../students/index.html">For Students</a></li>
      <li><a href="../industry/index.html" class="last">For Industry</a></li>
                        </ul>
    <!-- #EndLibraryItem --></div>
                    <!-- end navigation right -->
                </div><!-- end navigation left -->
           </div><!-- end navigation -->
            <div id="wrapper_l">
                <div id="wrapper_r">
                      <div id="innerwrapper">
                        <div id="internalBanner-print"> <h1>Commonwealth Alliance for Information Technology Education (CAITE)</h1></div>
                        <div id="internalBanner"><!-- InstanceBeginEditable name="internalBanner" -->
                          <div class="students-banner">
                            <table width="100%" border="0" cellspacing="0" cellpadding="0">
                              <tr>
                                <td width="125" height="188" align="left" valign="top" id="homeImage"><img src="../images/logo_vertical_small.png" alt="CAITE" width="105" height="188" /></td>
                                <td align="left" valign="top" id="internal-banner-quote"><div id="internalQuote">
                                    <div id="internalQuote-inner">
                                      <p>CAITE designs and carrys out comprehensive programs that address under-representation in information technology (IT).</p>
                                  </div>
                                </div></td>
                              </tr>
                            </table>
                        </div>
                        <!-- InstanceEndEditable --></div> <!-- end banner -->
                        <div id="internalContent">
                            <table width="100%" border="0" cellspacing="0" cellpadding="0">
                              <tr>
                                <td width="317" align="left" valign="top" id="secondary-content">
                                  <!-- InstanceBeginEditable name="SecondaryNav" --><!-- #BeginLibraryItem "/Library/studentNav.lbi" -->
                                  <h3><a href="../students/index.html">For Students</a></h3>
                                  <div id="secondaryNav">
                                    <ul>
                                      <li><a href="http://www.takeITgoanywhere.org" target="_blank">TakeITgoanywhere.org</a></li>
                                    </ul>
    </div><!-- #EndLibraryItem --><!-- InstanceEndEditable -->
                                </td>
                                <td align="left" valign="top" id="contentCell"><!-- InstanceBeginEditable name="mainContent" -->
                                  <h1>For Students</h1>
                                  <p>The University of Massachusetts Amherst is leading a Commonwealth Alliance for Information Technology Education (CAITE) to design and carry out comprehensive programs that address under representation in information technology (IT) education and the workforce. CAITE will focus on women and minorities in groups that are underrepresented in the Massachusetts innovation economy; that is, economically, academically, and socially disadvantaged residents.</p>
                                  <p>The project will pilot a series of outreach programs supported by educational pathways in three regions (one rural, one suburban, and one urban). The project will include work with high school teachers, staff, and counselors. CAITE will identify best practices and disseminate, deploy, extend and institutionalize these best practices statewide and nationally.</p>
                                  <p>Community colleges are the centerpiece of CAITE because of the central role they play in reaching out to underserved populations and in serving as a gateway to careers and further higher education.</p>
                                  <p>This project will build a broad alliance built on its leadership in and partnership with the Commonwealth Information Technology Initiative (CITI), the Boston Area Advanced Technological Education Center (BATEC), regional Louis Stokes Alliances and NSF EGEP programs, and other partnerships and initiatives focused on information technology education and STEM pipeline issues</p>
                                  <p> </p>
                                <!-- InstanceEndEditable --></td>
                              </tr>
                          </table>
                        </div>
                        <div id="alliances">
                              <table width="100%" border="0" cellpadding="0" cellspacing="0">
                                <tr>
                                  <td height="30"  align="left" valign="top"><h2><a href="../about/alliances.html">Alliances</a></h2></td>
                                </tr>
                                <tr>
                                  <td  align="center" valign="middle"><!-- #BeginLibraryItem "/Library/AllianceTable.lbi" --><p>
    <table border="0" cellpadding="2" cellspacing="0">
                                    <tr>
                                      <td width="35"  align="center" valign="middle"> </td>
                                      <td  align="center" valign="middle"><a href="http://www.citi.mass.edu/" target="_blank"><img src="../images/logo_citi.jpg" alt="Citi" width="65" height="50"  border="0 /"></a></td>
                                      <td align="center" valign="middle"><a href="http://www.batec.org/index.php" target="_blank"><img src="../images/logo_batec.jpg" alt="BATEC" width="69" height="46" border="0" /></a></td>
                                      <td  align="center" valign="middle"><a href="http://www.nsf.gov/index.jsp" target="_blank"><img src="../images/nsflogo.gif" alt="NSF" width="64" height="65" border="0" ></a></td>
                                      <td  align="center" valign="middle"><a href="http://www.nelsamp.neu.edu/" target="_blank"><img src="../images/nelsamplogo.gif" width="100" border="0"></a></td>
                                      <td  align="center" valign="middle"><p><a href="http://mysite.verizon.net/milnerm/" target="_blank"><img src="../images/umlsamp.png" width="85" height="63" border="0"></a></p>                                  </td>
                                      <td  align="center" valign="middle"><a href="http://www.neagep.org/index.asp" target="_blank"><img src="../images/nealogo.gif" border="0" ></a></td>
      </tr>
                                  </table>
    <!-- #EndLibraryItem --></td>
                                </tr>
                          </table>
                        </div>
                    </div> <!-- end inner wrapper -->
                </div><!-- end wrapper right -->
            </div><!-- end wrapper left -->
            <div id="bottom">
                <div id="bottom_l">
                    <div id="bottom_r"> </div><!-- end bottom right -->
                </div><!-- end bottom left -->
            </div>  <!-- end bottom -->
        </div><!-- end wrapper -->
        <div id="copyright"><!-- #BeginLibraryItem "/Library/copyright.lbi" -->
    <p>Sponsored by CAITE an NSF CISE Broadening Participation in Computing Alliance<br />
    &copy; copyright 2008 <a href="http://www.umass.edu/" target="_blank">University of Massachusetts, Amherst</a></p>
    <font color="#666666"><br>
    </font>
    <p><font color="#666666" size=2>  This material is based upon work supported by the National Science Foundation under Grant No.s NSF-0634412 and NSF-0837739. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.</font> </p>
    <!-- #EndLibraryItem --></div>    
    <!-- end copyright -->
    <script type="text/javascript">
    var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
    document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));
    </script>
    <script type="text/javascript">
    try {
    var pageTracker = _gat._getTracker("UA-7435501-1");
    pageTracker._trackPageview();
    } catch(err) {}</script>
        </body>
    <!-- InstanceEnd --></html>

  • I need help with this script please ASAP

    So I need this to work properly, but when ran and the correct answer is chosen the app quits but when the wrong answer is chosen the app goes on to the next question. I need help with this ASAP, it is due tommorow. Thank you so much for the help if you can.
    The script (Sorry if it's a bit long):
    #------------Startup-------------
    display dialog "Social Studies Exchange Trviva Game by Justin Parzik" buttons {"Take the Quiz", "Cyaaaa"} default button 1
    set Lolz to (button returned of the result)
    if Lolz is "Cyaaaa" then
    killapp()
    else if Lolz is "Take the Quiz" then
              do shell script "say -v samantha Ok starting in 3…2…1…GO!"
    #------------Question 1-----------
              display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
              set A1 to (button returned of the result)
              if A1 is "Apprentices" then
                        do shell script "say -v samantha Correct Answer"
              else
                        do shell script "say -v samantha Wrong Answer"
      #----------Question 2--------
                        display dialog "Most children were taught
    to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
                        set A2 to (button returned of the result)
                        if A2 is "Bible" then
                                  do shell script "say -v samantha Correct Answer"
                        else
                                  do shell script "say -v samantha Wrong Answer"
      #------------Question 3---------
                                  display dialog "In the 1730s and 1740s, a religious movement called the_______swept through the colonies." buttons {"Glorius Revolution", "Great Awakening", "The Enlightenment"}
                                  set A3 to (button returned of the result)
                                  if A3 is "Great Awakening" then
                                            do shell script "say -v samantha Correct Answer"
                                  else
                                            do shell script "say -v samantha Wrong Answer"
      #-----------Question 4--------
                                            display dialog "_______ was
    a famous American Enlightenment figure." buttons {"Ben Franklin", "George Washington", "Jesus"}
                                            set A4 to (button returned of the result)
                                            if A4 is "Ben Franklin" then
                                                      do shell script "say -v samantha Correct Answer"
                                            else
                                                      do shell script "say -v samantha Wrong Answer"
      #----------Question 5-------
                                                      display dialog "______ ownership gave colonists political rights as well as prosperity." buttons {"Land", "Dog", "Slave"}
                                                      set A5 to (button returned of the result)
                                                      if A5 is "Land" then
                                                                do shell script "say -v samantha Correct Answer"
                                                      else
                                                                do shell script "say -v samantha Wrong Answer"
      #---------Question 6--------
                                                                display dialog "The first step toward guaranteeing these rights came in 1215. That
    year, a group of English noblemen forced King John to accept the…" buttons {"Declaration of Independence", "Magna Carta", "Constitution"}
                                                                set A6 to (button returned of the result)
                                                                if A6 is "Magna Carta" then
                                                                          do shell script "say -v samantha Correct Answer"
                                                                else
                                                                          do shell script "say -v samantha Wrong Answer"
      #----------Question 7--------
                                                                          display dialog "England's cheif lawmaking body was" buttons {"the Senate", "Parliament", "King George"}
                                                                          set A7 to (button returned of the result)
                                                                          if A7 is "Parliament" then
                                                                                    do shell script "say -v samantha Correct Answer"
                                                                          else
                                                                                    do shell script "say -v samantha Wrong Answer"
      #--------Question 8-----
                                                                                    display dialog "Pariliament decided to overthrow _______ for not respecting their rights" buttons {"King James II", "King George", "King Elizabeth"}
                                                                                    set A8 to (button returned of the result)
                                                                                    if A8 is "King James II" then
                                                                                              do shell script "say -v samantha Correct Answer"
                                                                                    else
                                                                                              do shell script "say -v samantha Wrong Answer"
      #--------Question 9------
                                                                                              display dialog "Parliament named ___ and ___ as England's new monarchs in something called ____." buttons {"William/Mary/Glorius Revolution", "Adam/Eve/Great Awakening", "Johhny/Mr.Laphalm/Burning of the hand ceremony"}
                                                                                              set A9 to (button returned of the result)
                                                                                              if A9 is "William/Mary/Glorius Revolution" then
                                                                                                        do shell script "say -v samantha Correct Answer"
                                                                                              else
                                                                                                        do shell script "say -v samantha Wrong Answer"
      #---------Question 10-----
                                                                                                        display dialog "After accepting the throne William and Mary agreed in 1689 to uphold the English Bill of _____." buttons {"Money", "Colonies", "Rights"}
                                                                                                        set A10 to (button returned of the result)
                                                                                                        if A10 is "Rights" then
                                                                                                                  do shell script "say -v samantha Correct Answer"
                                                                                                        else
                                                                                                                  do shell script "say -v samantha Wrong Answer"
      #---------Question 11------
                                                                                                                  display dialog "By the late 1600s French explorers had claimed the ___ River Valey" buttons {"Mississippi", "Ohio", "Hudson"}
                                                                                                                  set A11 to (button returned of the result)
                                                                                                                  if A11 is "Ohio" then
                                                                                                                            do shell script "say -v samantha Correct Answer"
                                                                                                                  else
                                                                                                                            do shell script "say -v samantha Wrong Answer"
      #------Question 12---------
                                                                                                                            display dialog "______ was sent to ask the French to leave 'English Land'." buttons {"Johhny Tremain", "George Washington", "Paul Revere"}
                                                                                                                            set A12 to (button returned of the result)
                                                                                                                            if A12 is "George Washington" then
                                                                                                                                      do shell script "say -v samantha Correct Answer"
                                                                                                                            else
                                                                                                                                      do shell script "say -v samantha Wrong Answer"
      #---------Question 13-------
                                                                                                                                      display dialog "_____ proposed the Albany Plan of Union" buttons {"George Washingon", "Ben Franklin", "John Hancock"}
                                                                                                                                      set A13 to (button returned of the result)
                                                                                                                                      if A13 is "Ben Franklin" then
                                                                                                                                                do shell script "say -v samantha Correct Answer"
                                                                                                                                      else
                                                                                                                                                do shell script "say -v samantha Wrong Answer"
      #--------Question 14------
                                                                                                                                                display dialog "The __________ declared that England owned all of North America east of the Mississippi" buttons {"Proclomation of England", "Treaty of Paris", "Pontiac Treaty"}
                                                                                                                                                set A14 to (button returned of the result)
                                                                                                                                                if A14 is "" then
                                                                                                                                                          do shell script "say -v samantha Correct Answer"
                                                                                                                                                else
                                                                                                                                                          do shell script "say -v samantha Wrong Answer"
      #-------Question 15-------
                                                                                                                                                          display dialog "Braddock was sent to New England so he could ______" buttons {"Command an attack against French", "Scalp the French", "Kill the colonists"}
                                                                                                                                                          set A15 to (button returned of the result)
                                                                                                                                                          if A15 is "Command an attack against French" then
                                                                                                                                                                    do shell script "say -v samantha Correct Answer"
                                                                                                                                                          else
                                                                                                                                                                    do shell script "say -v samantha Wrong Answer"
      #------TheLolQuestion-----
                                                                                                                                                                    display dialog "____ is the name of the teacher who runs this class." buttons {"Mr.White", "Mr.John", "Paul Revere"} default button 1
                                                                                                                                                                    set LOOL to (button returned of the result)
                                                                                                                                                                    if LOOL is "Mr.White" then
                                                                                                                                                                              do shell script "say -v samantha Congratulations…you…have…common…sense"
                                                                                                                                                                    else
                                                                                                                                                                              do shell script "say -v alex Do…you…have…eyes?"
                                                                                                                                                                              #------END------
                                                                                                                                                                              display dialog "I hope you enjoyed the quiz!" buttons {"I did!", "It was horrible"}
                                                                                                                                                                              set endmenu to (button returned of the result)
                                                                                                                                                                              if endmenu is "I did!" then
                                                                                                                                                                                        do shell script "say -v samantha Your awesome"
                                                                                                                                                                              else
                                                                                                                                                                                        do shell script "say -v alex Go outside and run a lap"
                                                                                                                                                                              end if
                                                                                                                                                                    end if
                                                                                                                                                          end if
                                                                                                                                                end if
                                                                                                                                      end if
                                                                                                                            end if
                                                                                                                  end if
                                                                                                        end if
                                                                                              end if
                                                                                    end if
                                                                          end if
                                                                end if
                                                      end if
                                            end if
                                  end if
                        end if
              end if
    end if

    Use code such as:
    display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
    set A1 to (button returned of the result)
    if A1 is "Apprentices" then
    do shell script "say -v samantha Correct Answer"
    else
    do shell script "say -v samantha Wrong Answer"
    return
    end if
    #----------Question 2--------
    display dialog "Most children were taught to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
    set A2 to (button returned of the result)
    if A2 is "Bible" then
    do shell script "say -v samantha Correct Answer"
    else
    do shell script "say -v samantha Wrong Answer"
    return
    end if
    (90444)

  • I need help with my EtreCheck report

    Hi All -
    Thanks for taking the time -
    I NEED HELP WITH MY EtreCheck report
    Problem description:
    running slow
    EtreCheck version: 2.1.8 (121)
    Report generated February 19, 2015 at 3:18:49 PM EST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Mid 2012) (Technical Specifications)
        MacBook Pro - model: MacBookPro9,1
        1 2.6 GHz Intel Core i7 CPU: 4-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 130
    Video Information: ℹ️
        Intel HD Graphics 4000
            Color LCD 1440 x 900
        NVIDIA GeForce GT 650M - VRAM: 1024 MB
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 0:12:52
    Disk Information: ℹ️
        APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 748.93 GB (362.64 GB free)
                Core Storage: disk0s2 749.30 GB Online
        MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.AmbrosiaSW.AudioSupport (4.1.2 - SDK 10.6) [Click for support]
        [not loaded]    com.sony.filesystem.prodisc_fs (2.3.0) [Click for support]
        [not loaded]    com.sony.protocol.prodisc (2.3.0) [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.versioncueCS3.plist [Click for support]
        [loaded]    com.ambrosiasw.ambrosiaaudiosupporthelper.daemon.plist [Click for support]
    User Launch Agents: ℹ️
        [failed]    [email protected] [Click for details]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [failed]    com.jdibackup.ZipCloud.autostart.plist [Click for support] [Click for details]
        [loaded]    com.jdibackup.ZipCloud.notify.plist [Click for support]
    User Login Items: ℹ️
        RED Watchdog    Application  (/Applications/REDCINE-X Professional/Utilities/RED Watchdog.app)
        GrowlHelperApp    Application  (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
        GrowlHelperApp    Application  (/Users/[redacted]/Library/PreferencePanes/Growl.prefPane/Contents/Resources/Gr owlHelperApp.app)
        iTunesHelper    UNKNOWN Hidden (missing value)
        QmasterStatusMenu    Application  (/Incompatible Software/Apple Qmaster.prefPane/Contents/Resources/QmasterStatusMenu.app)
        SpyderUtility    Application  (/Applications/Datacolor/Spyder3Elite/Support/SpyderUtility.app)
        Spyder3Utility    Application  (/Applications/Datacolor/Spyder3Elite/Spyder3Utility.app)
        Google Drive    Application  (/Applications/Google Drive.app)
        Google Chrome    Application Hidden (/Applications/Google Chrome.app)
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 8.1.0 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0
    User internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.0 [Click for support]
    Audio Plug-ins: ℹ️
        DVCPROHDAudio: Version: 1.3.2
    3rd Party Preference Panes: ℹ️
        Adobe Version Cue CS3  [Click for support]
        Flash Player  [Click for support]
        Growl  [Click for support]
        REDcode  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
            10%    mds
             5%    WindowServer
             0%    Google Drive
             0%    Google Chrome
             0%    fontd
    Top Processes by Memory: ℹ️
        172 MB    Google Chrome
        155 MB    mds_stores
        155 MB    Mail
        103 MB    Google Chrome Helper
        94 MB    Google Drive
    Virtual Memory Information: ℹ️
        4.52 GB    Free RAM
        2.72 GB    Active RAM
        451 MB    Inactive RAM
        895 MB    Wired RAM
        1.30 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Feb 19, 2015, 03:03:40 PM    Self test - passed

    Why Put it off I say ... Here you go Linc
    Start time: 12:05:29 02/20/15
    Revision: 1250
    Model Identifier: MacBookPro9,1
    System Version: OS X 10.10.2 (14C109)
    Kernel Version: Darwin 14.1.0
    Time since boot: 2:42
    UID: 504
    I/O wait time (ms/s)
        kernel_task (UID 0): 39
    Font issues: 263
    Trust settings: admin 4, user 4
    TCP/IP
        Subnet mask: 255.255.252.0
    Listeners
        cupsd: ipp
        nfsd: 1023
        rpc.lockd: 1017
        rpc.rquotad: garcon
        rpc.statd: exp1
        rpcbind: sunrpc
    System caches/logs
        3319 MB: /System/Library/Caches/com.apple.coresymbolicationd/data
    Diagnostic reports
        2015-02-02 Mail crash
        2015-02-04 Spyder3Utility crash
        2015-02-20 Acrobat hang x3
        2015-02-20 Final Cut Pro crash x2
    HID errors: 22
    Kernel log
        Feb 20 10:20:53 Google Chrome He (map: 0xffffff801e1b7c30) triggered DYLD shared region unnest for map: 0xffffff801e1b7c30, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 20 10:31:10 ARPT: 3921.321063: MacAuthEvent en1   Auth result for: 00:19:92:35:03:01 Auth request tx failed
        Feb 20 10:41:10 Google Chrome He (map: 0xffffff801e116870) triggered DYLD shared region unnest for map: 0xffffff801e116870, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 20 10:41:14 Google Chrome He (map: 0xffffff802265ee10) triggered DYLD shared region unnest for map: 0xffffff802265ee10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 20 10:41:30 Google Chrome He (map: 0xffffff802265ee10) triggered DYLD shared region unnest for map: 0xffffff802265ee10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 20 11:20:59 Google Chrome (map: 0xffffff801e116870) triggered DYLD shared region unnest for map: 0xffffff801e116870, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 20 11:20:59 Google Chrome He (map: 0xffffff802b72a960) triggered DYLD shared region unnest for map: 0xffffff802b72a960, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 20 11:20:59 Google Chrome He (map: 0xffffff802b72a3c0) triggered DYLD shared region unnest for map: 0xffffff802b72a3c0, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 20 11:20:59 Google Chrome He (map: 0xffffff8023819f00) triggered DYLD shared region unnest for map: 0xffffff8023819f00, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 20 11:21:01 Google Chrome He (map: 0xffffff802cdb0e10) triggered DYLD shared region unnest for map: 0xffffff802cdb0e10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 20 11:21:01 Google Chrome He (map: 0xffffff8022da2e10) triggered DYLD shared region unnest for map: 0xffffff8022da2e10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 20 11:21:01 Google Chrome He (map: 0xffffff8023819b40) triggered DYLD shared region unnest for map: 0xffffff8023819b40, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 20 11:30:46 Sandbox: fontworker(1439) deny file-read-data /Library/Fonts/MyriadPro-LightCond.otf
        Feb 20 11:30:46 Sandbox: fontworker(1439) deny file-read-data /Library/Fonts/MyriadPro-LightCondIt.otf
        Feb 20 11:49:11 Google Chrome (map: 0xffffff802b72a2d0) triggered DYLD shared region unnest for map: 0xffffff802b72a2d0, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 20 11:49:11 Google Chrome He (map: 0xffffff802cdb0780) triggered DYLD shared region unnest for map: 0xffffff802cdb0780, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 20 11:49:11 Google Chrome He (map: 0xffffff8022a63e10) triggered DYLD shared region unnest for map: 0xffffff8022a63e10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 20 11:49:11 Google Chrome He (map: 0xffffff8022a63c30) triggered DYLD shared region unnest for map: 0xffffff8022a63c30, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 20 11:49:11 Google Chrome He (map: 0xffffff802cdb05a0) triggered DYLD shared region unnest for map: 0xffffff802cdb05a0, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 20 11:49:11 Google Chrome He (map: 0xffffff8022a63f00) triggered DYLD shared region unnest for map: 0xffffff8022a63f00, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 20 11:49:11 Google Chrome He (map: 0xffffff8022a63690) triggered DYLD shared region unnest for map: 0xffffff8022a63690, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 20 11:59:29 Sandbox: fontworker(1671) deny file-read-data /Library/Fonts/MyriadPro-LightCond.otf
        Feb 20 11:59:29 Sandbox: fontworker(1671) deny file-read-data /Library/Fonts/MyriadPro-LightCondIt.otf
        Feb 20 12:08:01 ARPT: 8890.600067: MacAuthEvent en1   Auth result for: 00:19:92:35:7d:e1 Auth request tx failed
        Feb 20 12:08:01 ARPT: 8890.950534: MacAuthEvent en1   Auth result for: 00:19:92:35:03:01 Auth timed out
    System log
        Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
        Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
        Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
        Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
        Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
        Feb 20 11:25:05 airportd: _handleLinkEvent: WiFi is not powered. Resetting state variables.
        Feb 20 11:28:01 WindowServer: WSGetSurfaceInWindow Invalid surface 489574406 for window 1303
        Feb 20 11:28:01 WindowServer: WSGetSurfaceInWindow Invalid surface 489574406 for window 1303
        Feb 20 11:28:01 WindowServer: WSGetSurfaceInWindow Invalid surface 489574406 for window 1303
        Feb 20 11:28:49 WindowServer: WSBindSurface Invalid surface 723885656 for window 1311
        Feb 20 11:29:13 fseventsd: event logs in /Volumes/WDA_1T/.fseventsd out of sync with volume.  destroying old logs. (461 2 59825)
        Feb 20 11:29:13 fseventsd: log dir: /Volumes/WDA_1T/.fseventsd getting new uuid: UUID
        Feb 20 11:30:16 bird: Assertion failed: ![_xpcClients containsObject:client]
        Feb 20 11:30:16 bird: Assertion failed: ![_xpcClients containsObject:client]
        Feb 20 11:32:32 bird: Assertion failed: ![_xpcClients containsObject:client]
        Feb 20 11:32:32 bird: Assertion failed: ![_xpcClients containsObject:client]
        Feb 20 11:32:32 bird: Assertion failed: ![_xpcClients containsObject:client]
        Feb 20 11:36:11 WindowServer: _CGXSetWindowHasKeyAppearance: Operation on a window 0x18 requiring rights kCGSWindowRightOwner by caller Dashboard
        Feb 20 11:36:11 WindowServer: _CGXSetWindowHasMainAppearance: Operation on a window 0x18 requiring rights kCGSWindowRightOwner by caller Dashboard
        Feb 20 11:41:24 apsd: Failed entitlement check 'com.apple.private.aps-connection-initiate' for ManagedClientAgent[1532]
        Feb 20 11:43:40 Mail: CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
        Feb 20 11:43:40 Mail: CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
        Feb 20 12:01:17 WindowServer: WSGetSurfaceInWindow Invalid surface 710322265 for window 1327
        Feb 20 12:04:39 fseventsd: implementation_removed_client: did not find client 0x7f9eec210660 for path = '/.docid'
        Feb 20 12:11:28 apsd: Failed entitlement check 'com.apple.private.aps-connection-initiate' for ManagedClientAgent[2262]
    Console log
        Feb 15 12:07:08 ReportCrash: Invoking spindump for pid=644 wakeups_rate=158 duration=285 because of excessive wakeups
        Feb 15 12:55:36 ReportCrash: Invoking spindump for pid=754 wakeups_rate=200 duration=225 because of excessive wakeups
        Feb 15 13:59:55 ReportCrash: Invoking spindump for pid=913 wakeups_rate=186 duration=242 because of excessive wakeups
        Feb 15 16:54:59 ReportCrash: Invoking spindump for pid=964 wakeups_rate=188 duration=240 because of excessive wakeups
        Feb 16 10:35:10 ReportCrash: Invoking spindump for pid=1059 wakeups_rate=337 duration=134 because of excessive wakeups
        Feb 16 10:51:21 ReportCrash: Invoking spindump for pid=1080 wakeups_rate=161 duration=280 because of excessive wakeups
        Feb 16 11:59:13 ReportCrash: Invoking spindump for pid=1168 wakeups_rate=243 duration=186 because of excessive wakeups
        Feb 16 12:02:57 ReportCrash: Invoking spindump for pid=1175 wakeups_rate=382 duration=118 because of excessive wakeups
        Feb 16 13:07:53 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.ic.searchinstaller/Cache.db is NOT valid.  Unable to determine schema version.
        Feb 16 13:07:53 nsurlstoraged: ERROR: unable to determine file-system usage for FS-backed cache at /Users/USER/Library/Caches/com.ic.searchinstaller/fsCachedData. Errno=13
        Feb 16 13:22:31 ReportCrash: Invoking spindump for pid=2237 wakeups_rate=326 duration=139 because of excessive wakeups
        Feb 16 14:17:37 ReportCrash: Invoking spindump for pid=2420 wakeups_rate=228 duration=198 because of excessive wakeups
        Feb 16 14:33:29 ReportCrash: Invoking spindump for pid=2438 wakeups_rate=240 duration=188 because of excessive wakeups
        Feb 16 14:46:36 ReportCrash: Invoking spindump for pid=2454 wakeups_rate=305 duration=148 because of excessive wakeups
        Feb 17 12:58:26 ReportCrash: Invoking spindump for pid=2894 wakeups_rate=689 duration=66 because of excessive wakeups
        Feb 17 13:13:41 ReportCrash: Invoking spindump for pid=2914 wakeups_rate=487 duration=93 because of excessive wakeups
        Feb 17 16:54:57 ReportCrash: Invoking spindump for pid=1965 wakeups_rate=162 duration=278 because of excessive wakeups
        Feb 18 13:50:58 ReportCrash: Invoking spindump for pid=3869 wakeups_rate=160 duration=282 because of excessive wakeups
        Feb 19 08:17:10 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid.  Unable to determine schema version.
        Feb 19 14:59:30 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid.  Unable to determine schema version.
        Feb 19 15:04:57 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid.  Unable to determine schema version.
        Feb 19 15:18:06 osascript: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types:  dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found.  Did find:
        /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
        Feb 19 16:50:23 ReportCrash: Invoking spindump for pid=3308 wakeups_rate=189 duration=239 because of excessive wakeups
        Feb 20 09:24:49 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid.  Unable to determine schema version.
    Daemons
        com.adobe.fpsaud
        com.adobe.versioncueCS3
        com.ambrosiasw.ambrosiaaudiosupporthelper.daemon
        com.apple.watchdogd
    Agents
        [email protected]
        - status: 78
        com.apple.Finder
        - status: -15
        com.google.keystone.user.agent
        com.jdibackup.ZipCloud.autostart
        - status: 1
        com.jdibackup.ZipCloud.notify
        - status: 1
    User login items
        RED Watchdog
        - /Applications/REDCINE-X Professional/Utilities/RED Watchdog.app
        GrowlHelperApp
        - /Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app
        GrowlHelperApp
        - /Users/USER/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelp erApp.app
        iTunesHelper
        - missing value
        QmasterStatusMenu
        - /Incompatible Software/Apple Qmaster.prefPane/Contents/Resources/QmasterStatusMenu.app
        SpyderUtility
        - /Applications/Datacolor/Spyder3Elite/Support/SpyderUtility.app
        Spyder3Utility
        - /Applications/Datacolor/Spyder3Elite/Spyder3Utility.app
        Google Drive
        - /Applications/Google Drive.app
        Google Chrome
        - /Applications/Google Chrome.app
    Firefox extensions
        Live PageRank
        Web Developer
        Exif Viewer
    iCloud errors
        bird 418
        cloudd 65
    Continuity errors
        sharingd 21
    Restricted files: 335
    Lockfiles: 48
    Contents of /Library/LaunchDaemons/com.adobe.versioncueCS3.plist
        - mod date: Oct 20 14:05:00 2009
        - checksum: 714202969
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>GroupName</key>
        <string>wheel</string>
        <key>Label</key>
        <string>com.adobe.versioncueCS3</string>
        <key>OnDemand</key>
        <true/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/Adobe/Adobe Version Cue CS3/Server/bin/VersionCueCS3d</string>
        </array>
        <key>RunAtLoad</key>
        <false/>
        <key>ServiceDescription</key>
        <string>Adobe Version Cue CS3</string>
        <key>UserName</key>
        <string>root</string>
        </dict>
        </plist>
    Contents of /Library/LaunchDaemons/com.ambrosiasw.ambrosiaaudiosupporthelper.daemon.plist
        - mod date: Dec 21 11:32:33 2012
        - checksum: 1980407752
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.ambrosiasw.ambrosiaaudiosupporthelper.daemon</string>
        <key>ProgramArguments</key>
        <array>
        <string>/System/Library/Extensions/AmbrosiaAudioSupport.kext/Contents/MacOS/amb rosiaaudiosupporthelper</string>
        </array>
        <key>KeepAlive</key>
        <false/>
        <key>Disabled</key>
        <false/>
        <key>LaunchEvents</key>
        <dict>
        <key>com.apple.iokit.matching</key>
        <dict>
        <key>AmbrosiaAudioSupport</key>
        <dict>
        <key>IOMatchLaunchStream</key>
        <true/>
        <key>IOProviderClass</key>
        <string>com_AmbrosiaSW_AudioSupport</string>
        </dict>
        ...and 4 more line(s)
    Contents of /Library/LaunchDaemons/com.apple.qmaster.qmasterd.plist
        - mod date: Aug 25 21:24:23 2010
        - checksum: 681742547
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.apple.qmaster.qmasterd</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/sbin/qmasterd</string>
        </array>
        <key>OnDemand</key>
        <false/>
        </dict>
        </plist>
    Contents of /private/etc/hosts
        - mod date: Sep 20 11:46:00 2013
        - checksum: 1921340845
        127.0.0.1 localhost
        255.255.255.255 broadcasthost
        ::1             localhost
        fe80::1%lo0 localhost
    Contents of Library/LaunchAgents/[email protected]
        - mod date: Sep 15 12:18:45 2009
        - checksum: 2526625188
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>KeepAlive</key>
        <false/>
        <key>Label</key>
        <string>[email protected]</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>LowPriorityIO</key>
        <true/>
        <key>Nice</key>
        <integer>10</integer>
        <key>ProgramArguments</key>
        <array>
        <string>/System/Library/Frameworks/CoreServices.framework/Frameworks/OSServices .framework/Versions/A/Support/CSConfigDotMacCert</string>
        <string>-l</string>
        <string>/Users/USER/Library/Logs/[email protected]</string>
        <string>-u</string>
        <string>@me.com</string>
        <string>-t</string>
        <string>SharedServices</string>
        <string>-s</string>
        </array>
        ...and 4 more line(s)
    Contents of Library/LaunchAgents/com.google.keystone.agent.plist
        - mod date: Nov 28 13:56:29 2014
        - checksum: 3826001454
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.google.keystone.user.agent</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>ProgramArguments</key>
        <array>
         <string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
         <string>-runMode</string>
         <string>ifneeded</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>3523</integer>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.jdibackup.ZipCloud.autostart.plist
        - mod date: Feb 19 15:00:08 2015
        - checksum: 2356528749
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
            <key>Label</key>
            <string>com.jdibackup.ZipCloud.autostart</string>
            <key>ProgramArguments</key>
            <array>
                <string>open</string>
                <string>/Applications/ZipCloud.app/Contents/Resources/Utility.app</string>
                <string>-n</string>
                <string>--args</string>
                <string>9</string>
                <string>-l</string>
            </array>
            <key>StandardOutPath</key>
            <string>/Users/USER/Library/Logs/ZipCloud/lagent_out.log</string>
            <key>StandardErrorPath</key>
            <string>/Users/USER/Library/Logs/ZipCloud/lagent_err.log</string>
            <key>RunAtLoad</key>
            <true/>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.jdibackup.ZipCloud.notify.plist
        - mod date: Feb 19 15:00:08 2015
        - checksum: 1841511774
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
            <key>Label</key>
            <string>com.jdibackup.ZipCloud.notify</string>
            <key>ProgramArguments</key>
            <array>
                <string>open</string>
                <string>/Applications/ZipCloud.app/Contents/Resources/Utility.app</string>
                <string>--args</string>
                <string>7</string>
                <string>1</string>
            </array>
            <key>StandardOutPath</key>
            <string>/Users/USER/Library/Logs/ZipCloud/lagent_out.log</string>
            <key>StandardErrorPath</key>
            <string>/Users/USER/Library/Logs/ZipCloud/lagent_err.log</string>
            <key>StartInterval</key>
            <integer>1200</integer>
            <key>RunAtLoad</key>
            <false/>
        </dict>
        </plist>
    Extensions
        /System/Library/Extensions/AmbrosiaAudioSupport.kext
        - com.AmbrosiaSW.AudioSupport
        /System/Library/Extensions/FAMProtocol.kext
        - com.sony.protocol.prodisc
        /System/Library/Extensions/JMicronATA.kext
        - com.jmicron.JMicronATA
        /System/Library/Extensions/prodisc_fs.kext
        - com.sony.filesystem.prodisc_fs
    Applications
        /Applications/Adobe Acrobat 8 Professional/Acrobat Distiller.app
        - com.adobe.distiller
        /Applications/Adobe Acrobat 8 Professional/Acrobat Uninstaller.app
        - com.adobe.Acrobat.Uninstaller
        /Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app
        - com.adobe.Acrobat.Pro
        /Applications/Adobe Bridge CS3/Bridge CS3.app
        - com.adobe.bridge2
        /Applications/Adobe Device Central CS3/Device Central.app
        - com.adobe.devicecentral.application
        /Applications/Adobe Dreamweaver CS3/Dreamweaver.app
        - com.adobe.dreamweaver-9.0
        /Applications/Adobe Extension Manager/Extension Manager.app
        - com.adobe.ExtensionManager
        /Applications/Adobe Fireworks CS3/Adobe Fireworks CS3.app
        - com.macromedia.fireworks
        /Applications/Adobe Flash CS3 Video Encoder/Adobe Flash CS3 Video Encoder.app
        - com.macromedia.FLVEncoder
        /Applications/Adobe Flash CS3/Adobe Flash CS3.app
        - com.adobe.flash-9.0-en_us
        /Applications/Adobe Flash CS3/Players/Debug/Flash Player.app
        - com.macromedia.Flash Player.app
        /Applications/Adobe Flash CS3/Players/Debug/Install Flash Player 9 UB.app
        - com.MindVision.VISEX
        /Applications/Adobe Flash CS3/Players/Flash Player.app
        - com.macromedia.Flash Player.app
        /Applications/Adobe Flash CS3/Players/Release/Flash Player.app
        - com.macromedia.Flash Player.app
        /Applications/Adobe Flash CS3/Players/Release/Install Flash Player 9 UB.app
        - com.MindVision.VISEX
        /Applications/Adobe Help Viewer 1.0.app
        - com.adobe.Adobe Help Viewer
        /Applications/Adobe Help Viewer 1.1.app
        - com.adobe.Adobe Help Viewer
        /Applications/Adobe Illustrator CS3/Adobe Illustrator.app
        - com.adobe.illustrator
        /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Analyze Documents.localized/Analyze Documents.app
        - N/A
        /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Calendar.localized/Make Calendar.app
        - N/A
        /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Collect for Output.localized/Collect for Output.app
        - N/A
        /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Contact Sheet Demo.localized/Contact Sheets.app
        - N/A
        /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Export Flash Animation.localized/Export Flash Animation.app
        - N/A
        /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Web Gallery.localized/Web Gallery.app
        - N/A
        /Applications/Adobe Photoshop CS3/Adobe Photoshop CS3.app
        - com.adobe.Photoshop
        /Applications/Adobe Premiere Pro CS3/Adobe Premiere Pro CS3.app
        - com.adobe.AdobePremierePro
        /Applications/Adobe Stock Photos CS3/Adobe Stock Photos CS3.app
        - com.adobe.stockphotos-1.5
        /Applications/Audacity/Audacity.app
        - net.sourceforge.audacity
        /Applications/Beak.app
        - com.flyosity.beak
        /Applications/Buzzbird.app
        - org.buzzbird.buzzbird
        /Applications/Celtx.app
        - ca.greyfirst.celtx
        /Applications/Datacolor/Spyder3Elite/Spyder3Elite.app
        - com.datacolor.spyder3elite
        /Applications/Datacolor/Spyder3Elite/Spyder3Utility.app
        - com.datacolor.spyder3utility
        /Applications/Datacolor/Spyder3Elite/Support/SpyderUtility.app
        - com.datacolor.spyderutility
        /Applications/Disk Inventory X.app
        - com.derlien.DiskInventoryX
        /Applications/Epson Software/Print CD/Print CD.app
        - jp.co.epson.PrintCD2
        /Applications/FileZilla.app
        - de.filezilla
        /Applications/FlashVideo Converter.app
        - com.geovid.
        /Applications/Gorilla Folder/Gorilla Program 4.0.0/Gorilla 4.0.0
        - N/A
        /Applications/HandBrake.app
        - org.m0k.handbrake
        /Applications/Levelator.app
        - org.conversationsnetwork.levelator
        /Applications/OpenOffice.org.app
        - org.openoffice.script
        /Applications/RecBoot.app
        - com.lepidu.RecBoot
        /Applications/Smultron.app
        - org.smultron.Smultron
        /Applications/TouchCopy.app
        - N/A
        /Applications/Uninstall MM Scheduling/Uninstall MM Scheduling.app
        - N/A
        /Applications/Utilities/Adobe Utilities.localized/Adobe Updater5/Adobe Updater.app
        - "com.Adobe.ESD.AdobeUpdaterApplication"
        /Applications/Utilities/Adobe Utilities.localized/ExtendScript Toolkit 2/ExtendScript Toolkit 2.app
        - com.adobe.estoolkit-2.0
        /Applications/Utilities/Bluetooth Firmware Update.app
        - com.apple.updaters.btfirmwareupdate201
        /Applications/Utilities/FAM Driver Tool.app
        - com.sony.famdrivertool
        /Applications/VLC.app
        - org.videolan.vlc
        /Applications/XDCAM Transfer.app
        - com.sony.bprl.xdcamtransfer
        /Applications/YouSendIt Desktop App.app
        - com.yousendit.YouSendIt
        /Applications/YouSendIt.app
        - com.yousendit.YouSendItExpress
        /Applications/gedit.app
        - org.gnome.gedit
        /Applications/iWork '08/Keynote.app
        - com.apple.iWork.Keynote
        /Applications/iWork '08/Numbers.app
        - com.apple.iWork.Numbers
        /Applications/iWork '08/Pages.app
        - com.apple.iWork.Pages
        /Developer/Applications/Utilities/MacPython 2.5/Build Applet.app
        - org.python.buildapplet
        /Developer/Applications/Utilities/Python 2.6/Build Applet.app
        - org.python.buildapplet
        /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.2.sdk/System/Li brary/CoreServices/MobileStorageMounter.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.2.sdk/System/Li brary/CoreServices/SpringBoard.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.2.sdk/System/Li brary/CoreServices/VoiceOverTouch.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.0/Symbols/System/Library /CoreServices/SpringBoard.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.0/Symbols/System/Library /CoreServices/VoiceOverTouch.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.2/Symbols/System/Libra ry/CoreServices/SpringBoard.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.2/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.3/Symbols/System/Libra ry/CoreServices/SpringBoard.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.3/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1/Symbols/System/Library /CoreServices/SpringBoard.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1/Symbols/System/Library /CoreServices/VoiceOverTouch.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.1/Symbols/System/Libra ry/CoreServices/MobileStorageMounter.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.1/Symbols/System/Libra ry/CoreServices/SpringBoard.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.1/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.2/Symbols/System/Libra ry/CoreServices/MobileStorageMounter.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.2/Symbols/System/Libra ry/CoreServices/SpringBoard.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.2/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2/Symbols/System/Library /CoreServices/MobileStorageMounter.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2/Symbols/System/Library /CoreServices/SpringBoard.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2/Symbols/System/Library /CoreServices/VoiceOverTouch.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.1/Symbols/System/Libra ry/CoreServices/MobileStorageMounter.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.1/Symbols/System/Libra ry/CoreServices/SpringBoard.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.1/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.2/Symbols/System/Libra ry/CoreServices/MobileStorageMounter.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.2/Symbols/System/Libra ry/CoreServices/SpringBoard.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.2/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/System/Library /CoreServices/MobileStorageMounter.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/System/Library /CoreServices/SpringBoard.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/System/Library /CoreServices/VoiceOverTouch.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.1/Symbols/System/Library /CoreServices/MobileStorageMounter.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.1/Symbols/System/Library /CoreServices/SpringBoard.app
        - N/A
        /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.1/Symbols/System/Library /CoreServices/VoiceOverTouch.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/MobileAddressBook.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/MobileSafari.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/MobileSlideShow.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/Preferences.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/Web.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/System/Library/CoreServices/MobileStorageMounter.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/System/Library/CoreServices/SpringBoard.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/System/Library/CoreServices/VoiceOverTouch.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/AdSheet.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/Contacts.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/Game Center.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/MobileSafari.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/MobileSlideShow.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/Preferences.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/TrustMe.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/Web.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/WebSheet.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/iPodOut.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/System/Library/CoreServices/MobileStorageMounter.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/System/Library/CoreServices/SpringBoard.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/System/Library/CoreServices/VoiceOverTouch.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/AdSheet.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/Contacts.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/Game Center~iphone.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/MobileSafari.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/MobileSlideShow.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/Preferences.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/TrustMe.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/Web.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/WebSheet.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/iPodOut.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/System/Library/CoreServices/MobileStorageMounter.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/System/Library/CoreServices/SpringBoard.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/System/Library/CoreServices/VoiceOverTouch.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/AdSheet.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/AdSheet~ipad.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Camera.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Contacts~ipad.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Contacts~iphone.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/DataActivation.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Game Center~ipad.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Game Center~iphone.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/MobileSafari.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/MobileSlideShow.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Preferences.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/TrustMe.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Web.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/WebSheet.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/iPodOut.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/System/Library/CoreServices/MobileStorageMounter.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/System/Library/CoreServices/SpringBoard.app
        - N/A
        /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/System/Library/CoreServices/VoiceOverTouch.app
        - N/A
        /Library/Application Support/Adobe/Adobe Asset Services CS3/AssetServicesCS3.app
        - com.adobe.assetServicesCS3
        /Library/Application Support/Adobe/Adobe Version Cue CS3/Server/bin/VersionCueCS3.app
        - com.adobe.versioncueCS3.VersionCueCS3
        /Library/Application Support/Adobe/Adobe Version Cue CS3/Server/bin/VersionCueCS3Status.app
        - com.adobe.versioncueCS3.VCStatusMenu
        /Library/Application Support/Adobe/Installers/UUID/Setup.app
        - com.adobe.Installers.Redirector
        /Library/Application Support/Adobe/Installers/R1/Setup.app
        - com.adobe.Installers.Setup
        /Library/Application Support/Intuit/QuickBooks/2007/JHandShake.app
        - com.intuit.JHandShake
        /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
        - com.microsoft.silverlight.sllauncher
        /Library/Application Support/ProApps/MIO/RAD/Plugins/ReadMe(Image Handling Library).app
        - jp.co.canon.DocumentLauncher
        /Library/Application Support/iWork '08/iWork Tour.app
        - com.apple.iWorkTour
        /Library/Documentation/User Guides And Information.localized/Apple Hardware Test Read Me.app
        - com.apple.AppleHardwareTestReadMe
        /Library/Printers/EPSON/InkjetPrinter/AutoSetupTool/EPIJAutoSetupTool.app
        - com.epson.ijprinter.EPIJAutoSetupTool
        /Library/Printers/EPSON/InkjetPrinter/Filter/rastertoescp.app
        - com.epson.ijprinter.rastertoescp
        /Library/Printers/EPSON/InkjetPrinter/Utilities/EPSON Printer Utility3.app
        - com.epson.ijprinter.Utility3
        /Library/Printers/hp/Fax/fax.backend
        - com.hp.fax
        /Library/Printers/hp/Fax/rastertofax.filter
        - com.hp.rastertofax
        /Library/Printers/hp/cups/filters/pdftopdf.filter
        - com.hp.print.cups.filter.pdftopdf
        /Users/USER/Documents/iPhone Apps/Archivers/build/Debug-iphonesimulator/Archivers.app
        - N/A
        /Users/USER/Documents/iPhone Apps/Archivers_test/build/Debug-iphonesimulator/Archivers.app
        - N/A
        /Users/USER/Documents/iPhone Apps/DateCell/build/Debug-iphonesimulator/DateCell.app
        - N/A
        /Users/USER/Documents/iPhone Apps/EasyCustomTable/build/Debug-iphonesimulator/EasyCustomTable.app
        - N/A
        /Users/USER/Documents/iPhone Apps/Grids/build/Debug-iphonesimulator/Grids.app
        - N/A
        /Users/USER/Documents/iPhone Apps/Metalsmith Suite/build/Debug-iphoneos/Metalsmith Suite.app
        - N/A
        /Users/USER/Documents/iPhone Apps/Metalsmith Suite/build/Debug-iphonesimulator/Metalsmith Suite.app
        - N/A
        /Users/USER/Documents/iPhone Apps/Metalsmith Suite/build/Debug/Metalsmith Suite.app
        - com.yourcompany.Metalsmith-Suite
        /Users/USER/Documents/iPhone Apps/Metalsmith Suite/build/Distrobution-iphoneos/Metalsmith Suite.app
        - N/A
        /Users/USER/Documents/iPhone Apps/Scrolling/build/Debug-iphonesimulator/Scrolling.app
        - N/A
        /Users/USER/Documents/iPhone Apps/UICatalog/build/Debug-iphonesimulator/UICatalog.app
        - N/A
        /Users/USER/Documents/iPhone Apps/WebViewTutorial/build/Debug-iphonesimulator/WebViewTutorial.app
        - N/A
        /Users/USER/Documents/iPhone Apps/XML/build/Debug-iphonesimulator/XML.app
        - N/A
        /Users/USER/Documents/sites/nvrslp.com/dev/the_lab/ns_resize
        - N/A
        /Users/USER/Documents/sites/zoomify/Zoomifyer EZ v3.1/Zoomifyer EZ.app
        - N/A
        /Users/USER/Library/Application Support/Google/Chrome/Default/Web Applications/_crx_apdfllckaahabafndbhieahigkjlhalf/Default apdfllckaahabafndbhieahigkjlhalf.app
        - com.google.Chrome.app.Default-apdfllckaahabafndbhieahigkjlhalf-internal
        /Users/USER/Library/Application Support/Google/Chrome/Default/Web Applications/_crx_bepbmhgboaologfdajaanbcjmnhjmhfn/Default bepbmhgboaologfdajaanbcjmnhjmhfn.app
        - com.google.Chrome.app.Default-bepbmhgboaologfdajaanbcjmnhjmhfn-internal
        /Users/USER/Library/Application Support/Google/Chrome/Default/Web Applications/_crx_blpebaehgfgkcmmjjknibibbjacnplim/Default blpebaehgfgkcmmjjknibibbjacnplim.app
        - com.google.Chrome.app.Default-blpebaehgfgkcmmjjknibibbjacnplim-internal
        /Users/USER/Library/Application Support/iPhone Simulator/3.1.2/Applications/UUID/Metalsmith Suite.app
        - N/A
        /Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/Metalsmith Suite.app
        - N/A
        /Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/Metalsmith Suite.app
        - N/A
        /Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/UICatalog.app
        - N/A
        /Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/WebViewTutorial.app
        - N/A
        /Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/Archivers.app
        - N/A
        /Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/AnimatedGifExample.app
        - N/A
        /Users/USER/Library/Application Support/iPhone Simulator/3.2/Applications/UUID/Metalsmith Suite.app
        - N/A
        /Users/USER/Library/Application Support/iPhone Simulator/4.2/Applications/UUID/Spinspiration.app
        - N/A
        /Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Metalsmith Suite.app
        - N/A
        /Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/XML.app
        - N/A
        /Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/DateCell.app
        - N/A
        /Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/UICatalog.app
        - N/A
        /Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Metalsmith Suite.app
        - N/A
        /Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Scrolling.app
        - N/A
        /Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Autoscroll.app
        - N/A
        /Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Grids.app
        - N/A
        /Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/TapToZoom.app
        - N/A
        /Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/EasyCustomTable.app
        - N/A
        /Users/USER/Library/Preferences/Macromedia/Flash Player/www.macromedia.com/bin/octoshape/octoshape
        - N/A
    Frameworks
        /Library/Frameworks/REDCODE.Color.framework
        - com.red.redcode.color
        /Users/USER/Library/Frameworks/EWSMac-GC.framework
        - com.eSellerate.EWSMac67108872
    PrefPane
        /Library/PreferencePanes/Flash Player.prefPane
        - com.adobe.flashplayerpreferences
        /Library/PreferencePanes/REDcode.prefPane
        - com.red.prefpanel
        /Library/PreferencePanes/VersionCueCS3.prefPane
        - com.adobe.versioncueCS3.VCPrefPane
        /Users/USER/Library/PreferencePanes/Growl.prefPane
        - com.growl.prefpanel
    Bundles
        /Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/ASEFormat.plugin
        - com.adobe.aseformat
        /Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/BMP.plugin
        - null
        /Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/Cineon.plugin
        - null
        /Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/EPS Parser.plugin
        - null
        /Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/GIF.plugin
        - null
        /Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/JPEG2000.plugin
        - null
        /Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/OpenEXR.plugin
        - null
        /Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/PBM.plugin
        - null
        /Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/PCX.plugin
        - null
        /Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/PNG.plugin
        - null
        /Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/Pixar.plugin
        - null
        /Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/Radiance.plugin
        - null
        /Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/Targa.plugin
        - null
        /Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/WBMP.plugin
        - null
        /Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/altiveccore.plugin
        - null
        /Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/dicom.plugin
        - com.adobe.dicom
        /Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/mmxcore.plugin
        - null
        /Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/multiprocessor support.plugin
        - null
        /Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/ppccore.plugin
        - null
        /Library/Application Support/Adobe/Adobe Asset Services CS3/Required/Photoshop Adapter.plugin
        - null
        /Library/Application Support/Adobe/Flash Player/Flash Player.plugin
        - com.macromedia.Flash Player.plugin
        /Library/Application Support/Adobe/Plug-Ins/CS3/File Formats/Camera Raw.plugin
        - com.adobe.CameraRaw
        /Library/Frameworks/HPDeviceModel.framework/Versions/2.0/Frameworks/Core.framew ork/Versions/2.0/Resources/PlugIns/CFXmlParser.plugin
        - com.hp.dmf.plugins.CFXmlParser
        /Library/Frameworks/HPDeviceModel.framework/Versions/2.0/Frameworks/Core.framew ork/

  • Hello, I need help with my macbook pro. It looks like I cannot install anything anymore. Everytime I try to install a new software, use the migration assistant or click the lock to make changes, it simply does not react.

    Hello, I need help with my macbook pro.
    It looks like I cannot install anything anymore. Everytime I try to install a new software, I simply get stuck during the installation type process. I put in my password, it does accept it, but it does not go any further.
    I tried to reset the password, put no password, repair the permissions, the disk but nothing will do. I nearly got stuck with the log in screen but finally succeeded in disabling it.
    So I thought I might try to create a new account but I cannot click the lock to make changes. It simply refuses to react.
    I am now thinking about using the migration assistant to save all my settings, data and so fourth, but again I get stuck when I have to type in my password. It accepts it but nothing happens...
    I guess it has something to do with the authorization process, but can't find anything on the internet about it... Can you help me out?
    I am running Lion 10.7.3.
    Regards,
    Nicolas.
    (I apologize if any grammatical/structural mistakes were to be found, english is not my mother-tongue. )

    You probably won't like this suggestion, but I suggest you reinstall Lion.
    First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS.

  • Need help with almost completed plugin engine project

    Hi all,
    For a while now I have been working on a plugin engine. After a few iterations, the engine is similar to the Eclipse engine, in that plugins use extension points and extensions to allow contributions. Unlike the eclipse engine I have added the ability for plugins to fire events through the engine and other plugins can add listeners, all through the plugin.xml manifest. Dependencies are mostly handled automatically at plugin load time (when extensions get resolved to extension points, and listeners get resolved to events). For the case where a plugin needs to use classes from another plugin, dependencies are also allowed to be declared. Like the eclipse engine, activation of plugins occurs the first time a class is used within the plugin's classpath, OR a plugin can be activated after it is loaded.
    What I need help with is testing, working on examples to provide with the engine project, and feedback/suggestions before we release the M1 build. I am asking for those that are interested in this type of work to volunteer to help where applicable and possible. I want to provide a solid plugin engine to the java community, one that is easy to use, works well, and is pretty effecient in terms of resource usage and performance.
    Of particular interest to me right at the moment is dealing with multiple versions. As I see it, the engine will be used within an application and as such plugins would be distributed with a specific application version. The plugin version itself is more of a notification as to what version a plugin is, although I imagine it will help when updating at runtime as well.
    Just a few other details of the engine. It handles (or will soon) dynamic load, unload and reload of plugins at runtime. Plugins can be distributed in an archive file format, we call .par (Plugin ARchive), with additional plugin filename extensions configurable at runtime. The plugins can be developed and deployed in an expanded directory format as they are in Eclipse as well, or in the archive format. In the archive format they do not need to be unzipped when deployed, and they can contain embeded jar/zip libraries. The engine handles finding and creating classes directly out of the .par file at runtime.
    Multiple locations to find plugins are configurable before the engine starts, and even after it starts more could be added to allow additional locations to find plugins. URLs are supported, and soon the HTTP protocol will be supported so that plugins can be downloaded and installed at runtime.
    The project can be found at www.sourceforge.net/projects/genpluginengine. If you would like to get involved and help out, please sign up on the dev mail list and send an email to introduce yourself to the rest of the members on the list.
    I'll also add that I am working on a Swing UI Framework built entirely from plugins. It provides a ready-to-launce UI application that developers can simply add their plugins to, extending various extension points of the framework to have menu items, toolbar buttons, status bar access, help and preferences dialog additions, file i/o choosers, tons of open-source components ready to use (or extend to add on to), and like Eclipse, hopefully... draggable window frames that can be dropped on any other frame to form a tabbed frame of windows. Some of this is a ways off, some is getting there now. Presently you can add menu items that do allow plugin activation when first clicked, so plugins can be loaded but not activated until needed. The Preference dialog works but is not completed, and a plugin that adds a plugin control panel to view all loaded plugins, activate them, load/unload/reload, view extension points, extensions, dependencies, etc is partially completed. The point is, to allow a ready to run UI framework in Swing with an easy path for developers to quickly build applications with. If you are interested in this, when you join the mail list and introduce yourself, indicate that you are interested in this as well, as we need help with plugin development for it and would appreciate more help here too.
    Look forward to some replies.

    Might I suggest setting up a project at a known project-site? I've seen your progress and questions posted here from time to time, but one of the drawbacks is that you have to fill each post with the entirity of your vision to explain what you're doing. That's a lot of text to read - and most folks will skip right over it.
    On the other hand, a well-crafted, good-looking project web-site, with appropriate links and docs and vision statements, diagrams, etc. will have more likelyhood of attracting volunteers. java.net and sourceforge.net are likely spots to set up shop. In addition, you get CVS and bug-tracking systems, which can be quite valuable in such a large-scale project where there are lots of pieces.

Maybe you are looking for

  • Change default language of login in database

    Hi, Working on SQL Azure. I'm running queries that are date dependent and so I need to set the default language of the user to be British (to get dd/mm/yyyy format). How can I do this in Azure. Create Login and Alter Login are restricted and when I q

  • Invalid Column Name Problem

    Hi.. I have a table component and that is bound to a Database Table. I have button name "UPDATE" which commits changes to DB. When I press "UPDATE" button an error occurs... Number of conflicts while synchronizing: 1 SyncResolver.UPDATE_ROW_CONFLICT

  • A way to view your memory?

    hello all, so I saw recently that my hard drive space is getting rather crammed. and I am sure there is a ton of stuff I could delete, I just don't necessarily know what's really taking up the space. my question is, is there a way to easily view, the

  • Username and Password Not Being Saved

    The option to save my username and pw is not coming up on my banking site, Wells Fargo. I get the option on other sites, I just set up FF. Also, does FF have a Key Logger Security option?

  • Updating table in RFC enabled function module

    Hi Experts, I have written a RFC enabled FM in ECC which will accept a table through TABLES parameter in which two columns will be filled and will update the rest two columns. I am using modify statement to update table from work area. When I am call