Camera has cloudy spot

The camera has a cloudy spot in same place when I take photos.  Also has a funny pink or purple spot in different spot. 

Cloudy? I think you should clean the lens part so it will produce better shots.

Similar Messages

  • Camera has cloudy shots.. sony should do something.

    what to do? i produce some cloudy shots.. especially on the front facing cam... i compared z1's cam, with the galaxy note 3..
    sony shud have better cam than note 3.. z1 is 20.7mp, while note 3 has less.. even with the front facing cam, its too cloudy.. or foggy.,
    but why note 3 is better?
    i just made this separate topic so that it is convenient for me to follow the post...

    Cloudy? I think you should clean the lens part so it will produce better shots.

  • IPhone 5 camera has some minor, yet annoying issues. Help!

    Well, to get to the point my back camera has spots on it.. Whenever I try to take a picture there is a violet, purple, dash on it followed by some gray, shadowy circles. I tried to clean the lens and I blew on it a couple of times but it just doesn't seem to work. Has anyone else experienced this? I'm still under warranty so could they fix or replace this?

    I bought it from Amazon from someone who previously owned it and it came with a few light scratches, nothing major. I'm not sure if the previous owners caused this to happen because since I had it I have taken great care of it and just recently I found the spots on the lens. Is there still a possibility they can fix it? Thanks for your help! (:

  • I've had my iPhone 4s for less than 6months and my camera has quit working. How can I fix it or get a new phone?

    I've had my Apple iPhone 4s for less than 6 months and the camera has stopped working. How do I go about fixing it or getting a new phone?

    There is a manufacturers warranty of one year. If you call 800-922-0204 they will send you a second hand iPhone. You then send the broken camera one back per their instructions.
    Or just walk into an Apple retail location and they can fix or replace on the spot. Personally I would go to the Apple store.
    Good Luck
    PS if the camera shows signs of breakage Verizon will charge you for the cost of the device. Apple will also unless you opt for a repair which could also run some money.

  • How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    read this
    https://discussions.apple.com/message/20429789#20429789

  • After upgrading to Lion, my Macbook Air's built in iSight camera has disappeared.  I'm not sure how to get it recognized again.

    After upgrading to Lion, my Macbook Air's built in iSight camera has disappeared.  I'm not sure how to get it recognized again.  Help -Sami

    Well, if you did then you may be able to track it, if you did not it's not possible.

  • HT5622 In settings it has a spot to add an e mail address to icloud . What does adding one do ? I haven't finished it by verifying through e mail but my phone keeps saying I am using it for icloudin this phone. Ugh now what ?

    In settings it has a spot to add an e mail address to icloud . What does adding one do ? I haven't finished it by verifying through e mail but my phone keeps saying I am using it for icloudin this phone. Ugh now what ?

    if it's a message coming from your yahoo account, it means that your account has been compromised, not your phone itself. i would suggest changing the password for your email account

  • My iPhone 5 has a grey-ish blue splodge on the screen. What is it and how can I get rid of it? The place that has the spot is about the size is about 2cm,it still works where the spot is. I haven't sat on my phone or hit it to hard, not that I remember.

    The place that has the spot is about the size is about 2cm,it still works where the spot is. I haven't sat on my phone or hit it too hard, not that I remember.  I  noticed a while ago. Will it disappear? I can see the things that should be where the spot is eg it's on the keyboard and I can see the keys. Will this spread to the whole screen? How can u get rid of this?

    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model
    Out-of-Warranty Service
    iPhone 5s, iPhone 5c,
    iPhone 5
    $269
    iPhone 4s
    $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone
    $149
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.

  • Making a PDF with an image that has both spot colour channel and alpha channel

    Hi I have a logo that was supplied to us as a PSD it has a transparent background, it also has a pantone colour channel. I have made a alpha channel from the transparent background as well.
    The graphic looks fine in InDesign (alpha channel selected in the import options), ie the background is transparent.
    But when we try to make a Hi Res PDF the result is that the graphic is on a solid white background.
    If I go back to the PSD and merge the spot channel with so that it is just CMYK and try again the PDF is fine, but we obviously loose the spot colour.
    How do you make a PDF with a transparent PSD that has a spot colour?

    You know that annoying response from support staff? "We cannot replicate your issue". Well....
    I created a PSD in CS5, with a bunch of process stuff, then loaded a spot color channel and painted in some pawprints using Pantone 172C:
    Saved this as a PSD file, default settings (maximize compatibility on, but it doesn't make any difference in this situation).
    Created a new InDesign document in CS5, added a gradient and some text, then placed the PSD.  ID understands the PSD has an inbuilt background so there's no need to bother with a dedicated alpha mask:
    Exported from ID using the High Quality Print option (PDF/1.4, which keeps the live transparency):
    Re-exported to PDF/X-1a (based on PDF/1.3 which flattens transparency) - looks exactly the same. In all cases the spot channel is intact and the see-through regions of the PSD are maintained.

  • Camera has suddenly started displaying white screen after I take a picture.

    Greetings all!
    My camera has worked great up until this week.
    I can see the image through the camera but after I take the picture my screen goes solid white.
    I no longer see the options to Send, etc on the screen.
    When I view pictures, when I open it I only see a red X in the upper left corner of the screen in a square.

    Hi and Welcome to the Forums!
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Best!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Multicam where each camera has a set of 4GB clips.

    Hi,  I have 2 cameras and shot a 1.3 houre talk.  Eatch camera has generated a set of 4GB files that whne played one after another give a uninterupted shot (i.e. eatch camera has 3 files).  How should I do mulicam this.  Do I create a sequence for eatch camera then multical the sequence?

    Best practice with the multi-part clips is this - copy entire contents of memory card to hard drive, then in Premiere, use the Media Browser to import your clips. Premiere will treat the multiple parts as one long clip then when imported. This should make it easier to use Multicam and also has the benefit of avoiding glitches between the shorter segments.
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • Unfortunately camera has stopped error

    I installed android lolypop few days ago. and from that day randomly when i open camera app sometimes it works fine and some times i get error unfortunately camera has stoped. i tried all kinds of reset hard reset soft. everything. factory reset. but nothing worked...
    camera wil work fine for few hours. then all of sudden i open camera app and wil get this message
    How i can fix it.. its not only on my phone. we have 3 s5 phones and all have same problem
    and when i restart my phone. same camera wil be working fine..
    i am tired of this error

    If you go to the settings, then to Applications, you can use the application manager to clear the cache and data from the camera application, which will reset the app itself to default (your pictures are stored in the Gallery app). I've seen it fix the force closing with the camera on that device after the update.
    I hope that does it for you!

  • A cloudy spot appeared on the center of my iMAC, how could I get rid of it?

    After turning my IMAC on for about 30 minutes a cloudy spot appeared right at the center of my display, it's about 2 palm size of iregular shape. How can i get rid of it?

    If you are still under warranty or have Apple care, you should have your machine examined by Apple.   It is not unusual but it is covered.   The exact reasons vary but do not be deterred by talk about environmental issues, unless you are a very heavy smoker, that is.   It is not advisable for non technical people to remove the glass screen however easy some may suggest it is; that's what a warranty is for.

  • Lumia 822 camera has greenish tint indoors

    My Nokia Lumia 822 camera has a greenish tint when used indoors.  Outside seems OK.  I heard a fix was coming but every time I click on Phone Update, it says my phone is up to date.  Any info on when I can expect a fix?
    Solved!
    Go to Solution.

    I have a 822 the next day after purchasing it went solid green. I did the power cycle and it went away. However, every single picture I take has a green line on the boarder on one side and green tint. This has to be know to Nokia and a fix needs to be issued soon. Otherwise sales representatives aren't going to push their products. I know I'm the one doing the demo for my company to determine whichever win8 mobile handset we go with. So I will have to point this out in my review if not corrected. So Nokia lets fix this asap please. This is the one I want to recommend, not the competition.
    This is last week of march. February has come and gone. Where is the fix? Too many people noting these green problems on new equipment to be offered refurbs spells class action suit brewing down the road. If it is a code fix do it. If hardware do cross replacements with "NEW" unopened units. Leaving and ignoring leads to disaster in cost and reputations. Spend now,fix. Side step now,disaster later.

  • Satellite T130: inbuilt web camera has stopped working

    Hi, I have the same problem of the question bellow, like I have looked around and I was not able to find the answer I need.
    I have a Satellite T130 and, suddenly, the inbuilt web camera has stopped working properly. A blue light is on, but there is no image. What can I do?
    Thank you

    Hi,
    the blue light is beside the web cam, on the top of screen. But this light is on when I try to use the web cam in anywhere, like Skype, Msn or even in programs in the computer that only take a pictue or make a video of you, without ineternet (I do not know the name of this program). But it seems that computer and the programs recognize the web cam, because there is no messages when I turn on the web cam.
    In Skype settings is the same, there is nothing wrong, there is no different message. The only thing is when I try to take picture a message appears: "failed", but the video seems to record normally, although everythng is black.
    Could you understand what I meant?
    Sorry about my english....

Maybe you are looking for