Camera icon appears but no photos
When I open iPhoto, the icon for my camera is already there, though not attached. When i do attach the camera the new photos I've taken do not appear for download.
Launch system information from spotlight in the top right then check the USB catagory under hardware to see if the Camera is recognized at all. Are yo uhaving trouble with any other USB devices?
Similar Messages
-
Camera icon appearing on desktop
Hi there, every time i start up, the icon i normally get when i have the camera connected appears.
But it isn't connected! iPhoto then launches.
I have deleted the contents of the camera 'folder' which stops iPhoto launching but the icon is stil there!
When i do connect the camera, a second icon appears.
I can't stop the camera icon appearing - it is driving me mad.
I thought maybe the camera had been disconnected incorrectly so went through tyhe procedure again of quitting iPhoto, ejecting the icon, switching off the camera and disconnecting.
Restart the machine and hey presto, icon back again!
Can anyone help me?
Thank youHi Andrew,
Can you trash the camera icon ??
Dimaxum -
My cousin bought iPod touch 5th gen. Then it doesn't turned on. He charge it a charge icon appeared but after 30 mins still off . Is that normal for a brand new iPod touch? Please help me..
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
and
try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Charging icon appears but not recognized by computer help!!!
Charging icon appears but not recognized by computer and yes i have waited 30 minutes. That what the manuals said.
Then after a while the icon dissapers and the apple loggo thing appears and i have tried to turn it on but it won't just do!!!!.And i have like a month letting my ipod connect to the computer via USB but it wont charge =S...
What's going on???
HELP!!!!Have you tried a different cable?
This is the iTunes Mac Discussions area - you can also post in the iPod Discussions as this is an iPod question more than an iTunes question.
Go here http://discussions.apple.com/category.jspa?categoryID=146 for iPod discussions.
MJ -
I just updated my itune on my PC and now it doesn't start. There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data? How can I fix the problem? Thanks
Try this from MacFixIt as well:
In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
* Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
* Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear. -
Why does camera icon appear next to slide to unlock bar on my IPod touch?
why does camera icon appear next to slide to unlock bar on my IPod touch? It makes a shutter sound when I turn the touch off
rsejnost wrote:
why does camera icon appear next to slide to unlock bar on my IPod touch? It makes a shutter sound when I turn the touch off
The camera icon appears so that you can take a picture quickly without having to enter your password. It is not responsible for the shutter sound. The Touch always made that sound when manually closing or going to sleep even with older iOS that did not have the camera icon. -
I have installed Angry Birds Seasons and the Icon appears but when I select the game it starts to open but then goes back to the home screen. What to do???
Try closing the app completely and then see if it works when you re-open it : from the home screen double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Angry Bird Seasons app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
A third option if neither work is to delete the app and then re-download it -
When I press the + and - buttons, the volume icon appears, but the slider is empty. When I receive a call, I hear it ring, and I can hear the ringtones in the sound menu. However, the message/mail notifications don't make any noise, and I can't hear the sound menu.
- During a phone call, if I put the conversation on speakers ==> it works and the volume bar reappears. I can control the volume with + and - buttons. But when the conversation is over, the bar disappears again.
- With the headphones, everything is ok!
- I also noticed (only a few times) that when I do a silent to ringer mode, the volume slider reappears and works correctly during 2 or 3 seconds, before disappearing again.
I don't know what is problem,because the speakers work.Hello jam5064,
We've an article which provides tips that can help get your iPhone working correctly.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Cheers,
Allen -
When I switch on, the Apple and progress icons appear but it does not start.
When I switch on, the Apple and progress icons appear but it does not start. I tried resetting PRAM, Utilities, everything. It says the system is OK. I even reinstalled Tiger, but nothing has changed.
Given that you were able to reinstall the OS, you must be able to boot from the install disc.
Have you run Apple Hardware Test?
Tried running on just one RAM module, then switch it to other slot, then repeat with other module?
Safe Boot?
Checked SMART status?
Run Repair Disk:Boot from install disc (insert disc > restart > immediately hold down ckey and keep holding it until you see “Preparing Installation”) > at firstscreen select the language and click Continue > click on the Utilities Menuin the menu bar > open Disk Utility > select your HD in the panel on theleft side> click Repair Disk at bottom of main window. Run this at leasttwice, and keep running it until it says “appears ok” twice in a row. If thatdoesn’t happen, you may need a stronger utility such as DiskWarrior or if thedirectory is damaged beyond repair, you may need to reinstall the OS, or youmay have a damaged HD (repair utilities can only repair the directorystructure, not the HD itself). When this is finished, quit Disk Utility, quitthe installer, and restart. Once booted normally, go to Applications >Utilities > Disk Utility and run Repair Permissions. -
I cant start trial Indesign CS6. The icon appears but when I click it it doesn't start.
What's your OS?
What exactly happen when you open the click on your Indesign Icon ?
Did you get any error while installing the software? -
Airplay icon appearing, but clicking it doesn't work with Apple TV
I have a Macbook Air (new 2013, just arrived today). The OSX is updated. For some reason, the Airplay icon appears but when I click it and select "Apple TV," it just flickers for a second, tries to connect, but then disconnects immediately. The display does not show up.
Also, my Apple TV is up to date as well.
What should I do about this?
edit: I recently saw this error pop up: "Error 200500" when connecting to the airplay.The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you also have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies. -
HT204291 AirPlay icon appears but still no airplay on tv? How to set it
Please advise airplay icon appear but still no airplay
I think i have thé Same issue. I have an ipad 4 and a 3rd generation Apple TV. The airplay button IS SHOWING. When I click on it, i can click to enable the mirroing. It automatically log me off my Apple TV. It's not working and have never been working. Can you help me figuring out what is going on ?
-
Firefox icon appears but when I click on it it shoots across the page and disappears
hi
the firefox icon appears but when I click on it something shoots across the screen to the right and I can't get access to the web because I can't click on it
at the bottom on the screen my main page appears but Iif I click on it nothing happens
== This happened ==
Every time Firefox opened
== last week ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2; Tablet PC 2.0)See:
* [[Software Update Failed]]
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder:
Mac: /Applications/Firefox.app/updates -
Two of my friends have been unable to contact me via face time.
They click on my address which has the blue camera icon but
their call does not register. Is it me or them?
Others get through OK.Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
Cheers, Tom -
My Iphone 5 has completly stopped working, have tried holding the sleep wake buttons etc but still no responce, there is an apple icon that appears but it then just goes agsin, any ideas.
see here
http://support.apple.com/kb/HT1808
Maybe you are looking for
-
G5 shuts down when Portable external drive connected to Fire wire port
Hi, I hope somebody can help me. I have a 100G lacie portable external HD that I use to back up my files regularly. It worked until today, I plug it in, I was able to save some files, and then the computer shut down. I restarted it and it did the sam
-
How to set default codepage in PI 7.0 for repository datatypes
Hi when creating a "data type" in PI 7.0 repository it sets the codepage to ISO-8859-1. Where does it get that from and how can we change it? Thx for your help
-
Webapp - where to store user files?
Hi All, My app is packaged in a WAR file, which gets expanded by servlet container during deployment. The app operates with folders containing user data (files uploaded by users, email templates, etc). Where should I create these user data folders -
-
Dear All, after SMD agent installation (SolMan 7, EHP1 SP3) the SMD service start without problems. Unfortunately the agent cannot be registered properly, in SMD Agent Candidates I can see it but it stays in status 'Waiting for agent registration'and
-
Being allowed to import music to itunes but not music videos?
Why can you import music you own to your itune collection but not music videos that you own?