Camera icon missing

I just updated my iPhone 3G to 3.0.1 & upgraded my service provider settings.
The phone rebooted after a successful install. However; since then my camera icon has gone missing and I cannot take any pictures.
Any help would be highly appreciated.
Thanks a lot, in advance.
Dhananjay Rokde
Sony Viao Laptop
Windows XP Professional
iPhone 3G (F/w 3.0.1)

This is a solution I received from a friend of mine for the Exchange mail issue; however, perhaps it would work for others.
In his case, his camera icon would disappear and none of the standard solutions would work. He would restore the camera back to when he had the icon, but the moment he set up his Exchange mail, it would disappear.
What he tried was turning SSL off, reboot the phone, and the icon came back! He turned SSL back on so now he has both the camera icon and Exchange mail.
I don't know about other mail programs/servers, but if they have policies like Exchange, perhaps you can try turning the SSL off to see if you get the icon back. If this does work, I suspect the icon may go away again whenever IT updates the mail policies and pushes a policy back out to the phone.
Hope this helps.

Similar Messages

  • IPhone 4 Camera Icon Missing, Facetime Unavailable after add Mail Exchange

    iPhone 4 running 4.0.1
    when my iPhone setup to MS Exchange email account (my company) I noticed that iPhone 4 Camera Icon Missing, Facetime Unavailable. I remove the account from "setting" - "Mail" and all feature came back to normal.
    This also happened to my colleague (iPhone 4 FM 4.0) connected to same MS Exchange server.
    However; I posted this issue on other forum and other iPhone 4 users don't have the same issue connected to Exchange.
    My Company running MS Exchange 2007

    Got it working now iOS support Exchange Policy!
    http://answers.yahoo.com/question/index?qid=20090617122000AAy6ZwS
    Exchange 2007 has active sync policies. One of the options is to disallow the camera.
    To resolve the problem do the following.
    1) Open Exchange Management Console
    2) Click "Organization Configuration"
    3) Click "Client Access"
    4) On the right you should see your active sync policies. Right click the policy and chose "Properties"
    5) Click the "Device" tab
    6) Check "Allow camera"
    And bingo it works!!!!

  • Camera icon missing from Blackberry Z3

    Hi All,
    I don't know what happened. Today i was trying to access my phone's camera using the bottom-right icon but it was not working. Later I realized that my camera icon from the main menu is missing. Could someone please help me in this regard.
    Best Regards,
    Muzafar

    muzafarr wrote:
     it was in a dimmed color at the end of my menu.
    explain that, please?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Camera Icon Missing. Search says Volume  is missing.

    Luckily, I've been problem free for quite a while, so hope I'm in the right discussion group. (Please re-direct me if I'm not.)
    My Minolta Dimage XI Camera (now owned by Sony) requires ejecting of the camera icon before shutting the camera. My iMac was working fine yesterday, but must have had too much going on simultaneously, because it froze and I had it restart in the middle of a photo project. Lost all the unsaved images, but was able to recapture them;actually opened automatically when I went to 'Open File.") But when I tried to turn off the camera in order to retake some shots in another room, the camera icon was missing. Manual says turning it off without ejecting can damage the camera, but sometimes a girl's gotta' do what she's gotta' do, and in the past I've ignored that instruction and been lucky. But also know I need to correct the problem.
    After spending 2 hours online unsuccessfully with a Minolta rep in Manilla, he finally advised me to contact Apple with the following info: (1) I'm able to acccess existing photos in the camera via Photoshop, so connection between camera and iMac is OK and computer recognizes the photos. (2) Search for "Minolta" led to what looked like the icon, but clicking on it reported that it was an alias and "volume" as missing. (3) Have already manually searched every folder but there's no sign of the either the volume or the icon. (4) With help of Minolta technician tried to reset the camera settings, but they were OK and did not need resetting.(5) Reinitializing did to restore preferences did not help either.
    The only thing I have not tried yet (because most of the day was spent looking for the icon) was Disk First Aid. If there's any chance it can restore a missing "volume" I will try it. Any other suggestions or advice will be much appreciated. I'd hate to lose the camera or destroy all the photos on it if I can avoid it. Thanks in advance for any ideas.

    You may have to go through the process of re-installing
    the camera's software into the computer and hope the
    files you have moved, or ones that have gone missing,
    will return and work later on if the camera software gets
    a fresh install into the system.
    You have to "unmount" the equivalent of a disk from the
    computer's desktop, prior to unplugging the physical item;
    or there could be file damages to the data within it. By not
    doing so, the files have been damaged. You can unmount
    a disk icon or memory card icon by Eject, or drag/drop/Trash.
    Same thing if you have an external hard disk drive attached.
    {One of my cameras is a Nikon DSLR and I can remove
    the card if desired and use a card reader, but usually I
    don't do that; and instead just turn on the camera. The
    other camera I have is a Panasonic Lumix (early FZ-1)
    & while I also have a card reader for that, I don't use it.
    Since the batteries (three per camera) need cycling and
    recharging at some point anyway, I seldom use a reader.}
    Usually, if the computer is accidentally turned off and a
    peripheral item such as a camera or external hard disk
    drive is left attached but not unmounted, the process of
    just turning back on the computer (and do NOT unplug
    the peripheral item) will let the Mac find that item again
    and it will work correctly, when the Mac reboots. And a
    sleeping Mac should not matter, just do not unplug the
    camera connections while it is asleep; it should be seen
    again normally when the computer awakens.
    Some cameras with a +wireless connection+ to a computer
    would lose the connection when either the camera or
    computer were turned off without un-mounting the icon
    or the representative file of the camera from the desktop.
    Using Eject, or drag/drop icon on to Trash, is the path.
    You may not have to un-install the existing camera software
    from the computer in order to re-install the same items again;
    in some cases, since the OS X may have a few of the same
    series drivers already installed, (plug n play works fine for me)
    you'd only defeat the existing compatibility if one removed that.
    I'm not sure how you could restore the camera's representative
    icon, but if the software in the camera were damaged where it
    is stored (not in the camera memory card you could remove)
    the item may be stored in the camera's Firmware. It may be
    possible to restore the camera's firmware, if that is the case.
    This is an item the manufacturer or their representative may be
    able to answer questions about: If the missing icon is something
    that could be due to damaged firmware, or not. And if so, how to
    restore it. Even a good camera shop (repair shop) may have a
    few answers, especially if they happen to also use Mac computers.
    Anyway, the link to get a free image restore utility is still a good
    thing. Even if you don't need it to resolve this issue, today. It is
    also capable of restoring some other data files, btw.
    The damaged file in software could be in the installed camera
    drivers in the computer, and there may also be some damage
    or corrupted files in the camera itself. Whether or not those are
    in the camera's memory card or on some ROM chip inside the
    camera (such as Firmware would likely be) is another matter.
    If you have a CD for the camera and it has Mac OS X driver
    software for the camera on it, you could try re-installing it.
    Or, you could look to the manufacturer's web site for newer
    camera driver software and download that; then install it.
    Be sure it does not supersede your Mac's OS requirement.
    A 'most new driver' would be for Leopard or Snow Leopard;
    and your old Tiger probably would be unhappy with that.
    Good luck & happy computing!

  • IPhone camera icon missing from lock screen with iOS 8.1

    Hi,
    I have an iPhone 5S with iOS 8.1 and the iphone camera icon is missing from lock screen.
    How can i enable it?
    Thanks!.

    Restrictions is OFF.
    I don't know what to do

  • Camera icon missing after updating to ios 5

    After updating to ios 5, the quick access camera icon is missing on the lock screen, I cannot access the camera unless I unlock phone. Has anyone else had this issue? I thought this was supposed to be one of the upgrade features?

    Yes. Mine too. Infact, along with Quick Access Camera Icon, my phone is also missing FaceTime and Imessage and Icloud (if there is any) icons. The settings, however, for facetime and imessage looks "Activated" because it doesn't say "waiting for activation" anymore when I eneter my password. it reads "Your phone number and email address will be shared……"

  • Droid maxx rear camera icon missing

    rear camera does not function,
    have safe booted,
    have did a complete restore,
    do not have a rear camera icon
    can not use rear camera

        We understand how important the camera function is, rlinenburg11. What type of error message do you receive when you attempt to use the rear camera? Is there any physical or liquid damage on the device? How long has this been going on?
    RobinD_VZW
    Follow us on twitter @VZWSupport

  • 10.2 update - after exiting folder, my bottom phone/search/camera icons missing

    After I updated my Z10 a couple weeks ago, I started noticing that after I click on a folder I created to store my app icons and then exit the folder, my bottom 3 basic icons are missing and will not return till I reboot.  When I click the center of the area that had the icons, a blue line appears just above the center area and if I hold it a "rename folder" box appears.  Is this a known glitch or am I just lucky?

    I'm having the same issue. Did you ever find a solution?

  • 'Missing Camera' icon with question mark!

    I uploaded over one hundred movies from my camera. Some of them show up in my iMovie library but some have the 'Missing Camera' icon. The movies are in the iMovie contents folder as .mov files. so I know they are in my computer. Why won't they show up in my library? I have the latest 10.0.1 iMovie version. I am running 10.9, Mavericks.

    Hi Phoenix, did you ever resolve this issue? I'm experiencing the same exact thing today and it's quite frustrating.
    Thank you!

  • Camera wireframe icon missing in 3d  perspective view!!!

    Dear Motion masters,
    I cant solve this problem and find it very tricky:
    I wanted to do some nice camera animation in 3d view, but after looking some tutorials I realized that my camera icon is missing which is really annoying as it gives real feel of how to frame the shot and move the camera... so after reading some of the forums I trashed the properties and I got it back in the new project, however when I open old project it disappears and even after saving the new project and restarting the motion it disappears... so I really don't know how to get it back.... the only time i can see it is after trashing the properties and starting motion for the first time... please help as I really need to finish one project and would like to use some 3d camera effects in it... thanx
    p.s. yes I have all the 3d views ticked and am looking at it in perspective, also tried zooming out a lot... almost till the moon
    thanx

    Welcome to the discussions.
    I would try opening the suspect project, creating a new project, then dragging all the groups from the "bad" project into the new one. Save the new project, quit Motion, trash your preferences, then open the new project and see if you maintain your camera view...
    Patrick

  • The camera icon is missing when i take a video,i cant take pictures on my iphone 4s and itouch 5th gen.it started when i updated it to ios 6.0.1

    The camera icon is missing when i take a video,i cant take pictures on my iphone 4s and itouch 5th gen.it started when i updated it to ios 6.0.1

    Sorry I'm so late responding; I've been away.
    http://support.apple.com/kb/TS3694#error1611
    The error means that your antivirus or firewall is blocking the update process.

  • Camera swap icon missing on screen

    Hi, I wanted to use my tablet to skype and noticed that the icon to swap the camera is missing on the screen. I have tried updating the software but still the icon is not showing Also have checked in settings and any other place i could think of.
    Anyone any idea? i have the tablet about 2.5 months but not used the camera really yet hence only just noticed.
    Thanks

    Hi, I have tried taking my tablet to the shop, they can't help and gave me some support phone number. Calling them it keeps asking me for a case number which I dont have. 
    If honest this is very frustrating and the Sony customer care has not impressed so far.
    I have looked everywhere and tried everything to find this icon but it's nowhere. Even the people in the shop couldnt find it. 
    What more can I do to get this sorted?? 
    I am very close to writing a formal complaint. 

  • After ios5 update to my iPhone 4 - missing the quick access camera icon on lock screen. Any suggestions?

    I downloaded the iOS 5 for my iPhone 4 with, it seemed, no problems.  However, I'm missing the quick access camera icon on the lock screen.  Any thoughts to moving forward?

    Hi, have you double clicked the home button while the iPhone is in lock screen?

  • I am missing my camera icon, how do I restore it?

    I am missing my camera icon, how do I restore it?

    Ok, I found out that I have it disabled in settings! Old dogs have a hard time learning new tricks (devices)!

  • How do I get my camera icon back on an iPhone 4S?

    My camera icon is missing from my iPhone.  It must have been accidentally deleted.  How do I get it back?

    Camera app can't be delete its a built in IOS.  I would try searching your apps folder and see if its in there. 
    If you still can't find it go to settings - general - reset - reset home screen layout - WARning doing this will remove all your apps from the folder and you will have to redo it, but at least you get your camera app back.

Maybe you are looking for

  • Messages in Oracle SOA-ESB queues duplicate - enqueing with same ENQ_TXN_ID

    Hi, We have a flow which accepts payloads from a third party application and this payload is enqueued into an advanced queue. Another process dequeues these payloads and does further processing. During the process of enqueuing, we observe that one pa

  • Macbook wont boot (folder icon with question mark)

    Dear all, I have macbook 13.3 (black one) for a year. This morning it just didn't boot and I got the question mark sign. I googled and discovered that it is probably a HD problem and the solution is: boot macbook from DVD install disk and try to repa

  • IE01 equipment no validation

    Dear all I have issue in IE01. I need to validate the equipment number as per the number range. For example: My equipment no will generate from BDPH123 like that. person gives Instead of BDPH if they give any other character it should rise error mess

  • Set_canvas_property's different behaviour in 9i

    Hi folks, My problem is that the code under works fine in 6i but does not in 9i (10g) set_canvas_property(canvas_id,VISUAL_ATTRIBUTE,name_in('global.qcolor')); (It's intended to change the background color of the canvas). I tried to use BACKGROUND_CO

  • External Table and HTTP

    All, Is it possible to specify a URL as the location of a file for an external table? (e.g. http://www.somesite.com/somedir/somefile.csv) For some organizations, getting files onto the actual Oracle server is a difficult process because they tend to