Camera is not working on MacBook Air 6,2 with Bootcamp and Windows 7 Pro 64-bit -- how to fix?

I have a MacBook Air 6,2 that has been Bootcamp'd with Windows 7 x64 Pro. Everything works find except for the camera, which does not appear to work at all. In the Windows Device Manager it shows the camera as installed with a working driver, but the camera never turns on.
Any ideas on how to make it work?

Hi,
If there is no error after the disk checking, please temporary disable antivirus, update BIOS and device drivers such as hard drive from computer manufacturer’s
website to check the result.
If the issue persists, I suggest you boot in Safe Mode, and clear the temp folder. Delete every files that can be deleted.
C:\Users\%username%\AppData\Local\Temp
In addition, the following threads would be helpful as well.
http://social.technet.microsoft.com/Forums/en-US/itprovistaapps/thread/7b64e871-71be-4c5d-a4a3-502744da978b
http://social.technet.microsoft.com/Forums/en/itprovistaapps/thread/9e5b22f1-8fb3-4d70-8f79-b92c7dc6e840
Thanks,
Simida
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

  • Camera is not working in Macbook Air (Last version...

    Hi everybody!
    I am having some problems with skype (6.1 and Mac OS X (10.9.3). 
    My camera isn't working anymore. In preferences section, it is not recognized (it is an isight integrated camera).
    In addition, now all my contacts are only "nicknames" without photos, but a month ago they were just names with photos.
    Does anyone have a solution?

    Double check to make sure you have all the latest software this will be critical going forward 
    please read...
    For all new downloads of Skype for Mac going forward the minimum supported OS X version is Mavericks. Skype might run on older OS versions, but it won't be tested and we can't guarantee it works. Skype is aligning to the support strategy of Apple here given that Mavericks is a free update for quite some time now.
    As a result of recent improvements to the way Skype video works mixed older version of Skype might not work in video mode.
    If you are experiencing video calling difficulties it might be because you or your friend are using an older version of Skype for Mac. Make sure you’re both using the latest version of Skype on your device.
    http://blogs.skype.com/2014/06/20/making-way-for-the-next-generation-of-skype-on-desktop/

  • Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

    Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

    I have a MacBook Pro Retina display: 15.4-inch late 2015 with OS X Mavericks install, only on second week. 
    Insight works on FaceTime, Skype, but yahoo program does not show insight cam in dropped down.
    Now when I got my new MacBook Pro, I down loaded all new Skype (worked tested), FaceTime (Worked Tested), Yahoo (not worked)
    Fix:
    With the new Maverick you have to use there messager program Version 8.0 (4218). Once I add my yahoo account video works again.
    It also supported AOL, AIM, Google Talk, Jabber.
    Guess I miss it frist time... hope this helps...

  • HI! i just installed OS X Mavericks and now my camera is not working, neither in Skype neither in photo booth and so on... what can i do? thank you

    HI! i just installed OS X Mavericks and now my camera is not working, neither in Skype neither in photo booth and so on... what can i do? thank you

    Download the 10.9.3 Combo update and install it. Unplug all peripherals (external drives etc) and exit all apps while it's being installed, reboot afer it completes.

  • My Ipad keyboard is not working in email now that I have downloaded the OS6.  Anyone know how to fix it?

    My Ipad keyboard is not working in email now that I have downloaded the OS6.  Anyone know how to fix it?

    I have the same problem.  Emailed apple--no help

  • Camera not working for macbook air

    It's a macbook air A1370, iOS 10.8.3. The build-in camera is not working. Both Facetime and photobooth show that the camera is not connected. I checked the system info, under the usb session, the build-in camera is there. I followed some posts and reset the SMC, not helping.
    What should I do?
    Any help is greatly appreciated!

    tdingsh wrote:... Is there a way to re install the camera driver? ...
    Yes.  Follow the instructions for reinstalling your Mac OS X.  All necessary drivers are automatically installed by the OS X installer.
    tdingsh wrote:... Apparently ... computer is not detecting the in-built camera ...
    By using your Mac''s (option) > System Information... menu command, you can be certain whether your Mac detects its camera.
    When the System Information window opens, click on "USB" under "Hardware" in the sidebar.  Then look in the USB Device Tree window pane that opens when you select "USB". Click ALL right-facing triangles ( ▶) so they point down (▼) and reveal all individual items.
    If your camera is nowhere in the USB Device Tree window pane, your Mac does NOT recognize the cam.
    Resetting the SMC using the instructions for your specific Mac model may restore camera function.
    Message was edited by: EZ Jim
    Mac OSX 10.8.3

  • Webcam on 2008 Mac Pro with Bootcamp and Windows 7.  Cannot get it to work.

    Have windows 7 Professional on my mac, using Bootcamp
    I cannot get any webcam to work.
    So far, I have used ....
    A Logitech QuickCam Vision Pro for Mac. No app can detect it.
    A Logitech C510 Webcam (for PC) No app can detect it.
    An Agama V-2025 Webcam (for both Mac & PC and supposedly no additional drivers needed). No app can detect it.
    I called Logitech and they said as it was too complicated for them to support, (i.e. Windows on a mac with bootcamp) and so they couldn't help.
    Any ideas would be most appreciated.
    Thanks.

    Use bootcamp. I have been a loyal Adobe guy for 12+ years, but now that I have upgraded to mac...Adobe just sucks. I have not been able to finish a project yet do to the shabby CS4 media encoder.

  • Camera not working on macbook air

    I have a macbook air (bought this year), mavericks 10.9.4 and my camera isn't working. When I opened FaceTime, it did nothing and when I opened PhotoBooth, there was I sign for loading (but nothing happened) and the little green light besides the camera was blinking. I just tried resetting and logging with another username but nothing happened. What should I do ?

    I tried everything on that list, I even reset the SMC but it's still not working. Also the camera isn't detected in the USB header (before and after reseting SMC)...

  • Airport Express not working for MacBook Air, ok for iMac

    I connect to the internet via wireless broadband; the ethernet cable from the broadband antenna plugs into my Airport Express router.  I run both my 27" iMac desktop and my 13" Mac Book Air off the Airport Express router.  To the best of my knowledge, nothing has changed with my internet provider's settings.
    Since Friday, the MacBook Air internet connection barely works; if a page loads, it takes forever (and I have a very fast broadband connection.)  Checking the same connection on the iMac has no delay and loads instantly.  On the laptop, if the page does load, and I click a link on that page, the link takes me to a new page requesting me to log in to my internet provider, or just fails to load.  I get lots of "page failed to load; interneet connection was reset....".
    I have checked network settings on both machines and they appear to be just fine.  I have run diagnostics and it shows everything working fine.
    I ran Disk Utility (permissions repair and verify disk) and have no problems.
    I have tried restarting the laptop several times.
    Software is up to date.
    I don't think it's the internet server or the connection since it's working on the desktop Mac.
    I'd appreciate any suggestions or things to try; I read about doing soft and hard resets but am reluctant to try that since Airport is working for the desktop computer just fine.

    I have a MacBook Pro Retina display: 15.4-inch late 2015 with OS X Mavericks install, only on second week. 
    Insight works on FaceTime, Skype, but yahoo program does not show insight cam in dropped down.
    Now when I got my new MacBook Pro, I down loaded all new Skype (worked tested), FaceTime (Worked Tested), Yahoo (not worked)
    Fix:
    With the new Maverick you have to use there messager program Version 8.0 (4218). Once I add my yahoo account video works again.
    It also supported AOL, AIM, Google Talk, Jabber.
    Guess I miss it frist time... hope this helps...

  • HP Laserjet Pro 1102w Wireless (Not working on MacBook Air 10.10)

    HP Laserjet Pro 1102w Wireless is not working on my MacBook Air Yosemite (v10.10).
    I tried setting it up via this link: (v10.10 Yosemite, Method 3: Wireless Setup Using a USB Connection)
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02847467#N2251
    All I get under printers is the USB kind and NOT the Wireless/Bonjour kind.
    Can anyone help me out?
    Thanks.  

    Hi @Random_Pelican ,
    I see that you are having issues setting up the printer on 10.10. I would like to help you out today.
    If the printer has a valid IPv4 address and you still can't add the printer as a Bonjour printer, most likely Multicasting is turned off on the router, since your not able to add the printer as a bonjour device and the other devices won't recognize the printer. Just call the router company and have them turn it on.
    If the printer doesn't have a valid IPv4 address please try these steps:
    Reset the printer first to clear out any previous network settings.
    Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
    Print out a configuration report and make sure the SSID and IP address are cleared.
    Printing a Configuration Page.
    Make sure Safari is set as the default browser. Sometime the Embedded Web Server won't open if it isn't.
    Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
    I will provide the steps for 10.9, which should work the same for 10.10.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Here is a Youtube video of the Laserjet P1102w wireless installation on Maverick.
    Laserjet P1102w.
    You may follow the steps instead of watching the video.
    You have to connect the USB cable from the printer to the computer to install the printer as a USB device first and then configure the wireless network.
    Turn the printer on, connect the USB cable and install the Apple Update that should automatically load.
    Then go to the Apple, System Preferences, Printers and Scanners.
    Highlight the Laserjet on the left side of the window.
    Then click on Open Print Queue, click on Settings, click on Utility, click on Open Printer Utility, then click on the HTML Config button.
    The Embedded Web Server for the printer will open.
    Click on the Networking tab, select Wireless on the left side.
    Fill out this information for your network. Status make sure you select Enabled.
    Apply the settings.
    Then go back to Apple, System Preferences, Printers and Scanners and click the + sign to add the Laserjet bonjour printer. (might take a couple of minutes to appear) Make sure the printer listed beside use: shows the proper printer name and not the default driver, then click on the add button.
    Delete the USB printer from the list from the Printers and Scanners window.
    Disconnect the USB cable.
    Test the printer.
    Let me know how you make out.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HT4628 The Wifi does not work when Macbook Air is started by Win8. How to let the Wifi work in Win8 ?

    Hi all,
    WIFI of Macbook Air works when the notebook started with OS X.
    But when I restart the Macbook Air with Win8, the Wifi does not work.
    The Macbook Air was bought last month. It is new model. The wifi may be a/c.
    Thanks,

    hey zyzzyxx, you're not the only one with this issue. it happens to me too. as soon as i unplug my cintiq via thunderbolt display my connection shoots straight back to having 20mbps down. i checked it using a speedtest.
    ever find a fix for it?

  • WD external 1TB not working anymore @ Macbook Air

    hi there.
    After hours trying to figure it out, I just realized that I have too an OLD WD 1TB that has the sata brdge together with the drive itself... problem is, my Macbook is not recognizing the WD passport anymore. It is my time machine backup drive, so I am kind of upset...
    There is a way, any way to put this drive again working, in another drive case or whatever?
    I already updated the drives, I have 2 others external drvies, one from iomega and another one from WD, olders, and both are working.
    i bought this one january/2013 in LA. How old are they?!?! gosh...
    I have a MacBook Air 13", MACOSX 10.8.
    here is a photo from the drive, after I had opened the case.
    Thanks for any help or hint.
    Cheers form Brazil,
    AM

    Yup, that is WHY you never buy WD external HD, they cheap out and save 50 cents by making the controller board and SATA bridge card the same unit
    Toshiba is now doing the same thing, avoid them as well
    Purchase Seagate and Hitachi to avoid that (Hitachi are the best ext. USB drives without doubt)
    see here all about it:
    Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
    There is a way, any way to put this drive again working, in another drive case or whatever?
    ONLY if you had another identical HD you could swap the controller boards.
    . It is my time machine backup drive, so I am kind of upset...
    You never should have let yourself be in the position of having a single external DATA copy, ever
    hard drives are way way too cheap to let that happen.
    i bought this one january/2013 in LA. How old are they?!?! gosh...
    That doesnt mean anything
    Hard Drive Warning (all makes and models)
    Ironically but logical, new hard drives are far more fragile than one that has been working for several months or a couple years. So beware in your thinking that a new hard drive translates into “extremely reliable”!
    Hard drives suffer from high rates of what has been termed "infant mortality". Essentially this means new drives have their highest likelihood of failing in the first few months of usage. This is because of very minor manufacturing defects or HD platter balancing, or head and armature geometry being less than perfect; and this is not immediately obvious and can quickly manifest itself once the drive is put to work.
    Hard drives that survive the first few months of use without failing are likely to remain healthy for a number of years.
    Generally HD are highly prone to death or corruption for a few months, then work fine for a few years, then spike in mortality starting at 3-4 years and certainly should be considered end-of-life at 5-7+ years even if still working well. Drives written to once and stored away have the highest risk of data corruption due to not being read/written to on a regular basis. Rotate older working HD into low-risk use.
    The implication of this is that you should not trust a new hard drive completely (really never completely!) until it has been working perfectly for several months.
    Given the second law of thermodynamics, any and all current mfg. HD will, under perfect storage conditions tend themselves to depolarization and a point will be reached, even if the HD mechanism is perfect, that the ferromagnetic read/write surface of the platter inside the HD will entropy to the point of no viable return for data extraction. HD life varies, but barring mechanical failure, 3-8 years typically.
    Hard drive failure and handling
    The air cushion of air between the platter surface and the head is microscopic, as small as 3 nanometers, meaning bumps, jarring while in operation can cause head crash, scraping off magnetic particles causing internal havoc to the write surface and throwing particles thru the hard drive.
    Hard drives are fragile in general, regardless, ... in specific while running hard drives are extremely fragile.
    PDF: Bare hard drive handling generic instructions
    hard drive moving parts
    Some of the common reasons for hard drives to fail:
    Infant mortality (due to mfg. defect / build tolerances)
    Bad parking   (head impact)
    Sudden impact   (hard drive jarred during operation, heads can bounce)
    Electrical surge   (fries the controller board, possibly also causing heads to write the wrong data)
    Bearing / Motor failure   (spindle bearings or motors wear during any and all use, eventually leading to HD failure)
    Board failure   (controller board failure on bottom of HD)
    Bad Sectors   (magnetic areas of the platter may become faulty)
    General hard drive failure

  • Letter keys are not working on MacBook Air when playing games?

    Hello. I'm using 10.6.6 on my MacBook Air 2.1 (2009 model).
    I've got a really strange issue when playing games (any game produces this issue). ONLY the letter keys aren't working. The rest is working - numbers, function keys, arrows, tab, enter, delete, etc. Only the keys A to Z are not working.
    This happens both on native games (like Hedgewars from App Store) and ported ones (like Need for speed).
    What's the issue?
    Thank you!

    Bump.

  • Skype not working on MacBook Air

    I use Skype on my iMac without any problems; however it will not work on my new MacBook Air. I have tried everything suggested in the forum and nothing works.
    I get a message "Sign In Error...Wrong Password". However, this is the correct Skype Name and Password that work just fine on my iMac.
    Other times I just get the spinning ball which goes on forever and never connects.
    I tried to post a message in the Skype forum but it doesn't even recognize my email address!
    Someone said something about downloading Flash to the Air?
    Is this an Apple problem or a Skype problem?
    Thanks for your help....David

    The first time I tried Skype on my new MB Air it showed as if me and my husband were both off-line, when in fact we were on-line. So I updated Skype - same problem. I then closed Skype and re-opened. I clicked "Always Allow" when it asked if it could access my pw keychain. Then instead of calling my husband from my Skype contact list I typed his Skype name into the search field and called him from there. Suddenly we both showed up on-line and everything worked.
    I suggest that you try creating a new Skype identity and see if it works.

  • My headphone is not working on macbook air 11

    I have a macbook air 11", and after upgrading to mountain lion, my headphones are not working.
    I have tried with multiple headphones and multiple software (itunes, skype, etc.), and I can´t hear.

    First, turn the volume up.
    Just kidding.
    Do the internal speakers work?
    Check Audio MIDI Setup (Applications -> Utilities).
    If all looks good but still no sound, ask yourself - and check - if any 3rd-party apps or drivers are installed and running (-> Login Items?) that deal with sound. Update to ML-compatible versions or completely remove them.

Maybe you are looking for