Camera is working in negative mode
my iphone camera is in a black/white negative mode and for some reason i can not reset it back to coulor mode
i have tryied all the settings but im doing something rong but what ??? any one help ? thanks
Try restarting your iPhone by holding down the on/off and the home buttons until you see the Apple logo.
Similar Messages
-
My camera stopped working in all modes ie facetime skype ect...
My camera does not work front or back. Sometimes the back camera comes on, but stops quickly. The camera does not work using any application.
Try closing the Camera app:
1. Double-click the Home button to reveal the Task Bar
2. Hold down the Camera app for a second or two until you see the minus sign
3. Tap the minus sign to close app
If the above doesn't solve the problem, do a reset:
Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider -
my camera is playing up its stuck in negative mode. even when i play a video and on youtube it plays in black/white negative mode. anyone help please?
<E-mail Edited by Host>Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474. -
Q10 I turn Camera Flash On but it Doesn't work IN ALL MODES
Q10 I turn Camera Flash On but it Doesn't work IN ALL MODES
I know, especially stupid that it doesn't work in stabilisation mode as its often that mode used in lower light situations that would benefit from the flash... have no idea why BB doesn't allow US to chose when we want a certain function.
-
pls help my iphone 4 was on activation "required". i jailbroke it then it worked but some of the applications were crashing down,won't open. i tried a lot of tutorials and then error message 3194 came out. stucked in recovery mode,and then i use snowbreeze and then it worked!!!! but another problem came, i turned off my iphone then i switched it on again then it stucked in apple logo,.after doing some thing again 1604, 1600 bla bla bla came out..pls help me fix my iphone.
no help for jailbroken phones here-it's not allowed. good luck.
-
Even when i turn my iphone to silent mode, the shutter sound of the camera still working. Why is it happen?
Plug it into power, and hold down the home and the sleep/wake button for 30 seconds.
If this doesn't work chances are something is wrong with your iPhone, I'd suggest taking it to an Apple Retail store. www.apple.com/retail (You can change your country at the bottom of the page if need be, that's for the US)
Also, if you look in the headphone jack... or look into the bottom where the dock connector plugs in... and you see a red circle... You've set off the Liquid Contact Indicators in your iPhone by getting liquid in your unit. That would definately be a reason for your iPhone to not be working. -
IPhone 3g view in negative mode how do I change this?
the view is in a negative mode Black on White. How do I change this view.
THANKS. CAMERA NOW WORKING..
-
Ipod Touch 54 3g - Screen went into negative mode
My screen went into negative mode tonight. White background, all the colors are inverted. Its like looking at a negative for a film camera. Tried powering it down, it restarts, then switches into negative mode.
Any ideas?Roaming:
I got to work today, and tested your theory. I sync this with my work PC since I am almost always here LOL. Sure enough, I can set the accessibility option to use the white screen and the **** thing inverts the colors.
What I cannot figure out is how this got implemented. I was laying on the couch watching TV, and had just closed an email message. Next thing I know, the screen is on an acid trip.
It sure doesn't seem like a great option for those users who have poor eyesight. You are almost punished for using this setting. Photos aren't viewable and forget videos. Why not just give people the option of a background color?
Thanks for your quick response and correct diagnosis.
chaz -
X230T camera not working since Windows update (Windows 8)
Hi experts!
I have a X230T with a camera and Windows 8 installed on it.
The camera driver Lenovo offers for Windows 8 always was unstable. I had a lot of trouble with it already. But after a reboot the camera always worked again. Now, after a Windows 8 update (by Microsoft), the camera is not working at all anymore.
I already did an uninstall/install of the camera + cold boot, but every time i tried there is no camera function. So it has given up it's work completely. I am pretty sure that the camera is without any fault physically, but the driver just doesn't work anymore under Windows 8.
Anyway, Lenovo should have fixed the bad driver for a long time already, but now this is obviously a really major issue.
Any ideas?Did you try a real reboot, not just turning off and on (totally different things)
A reset/reboot is:
Go to Home Screen
Press and Hold Home Button
Keep holding and press and hold Lock Button
Keep holding Both
You will see Slide to Turn Off (Don't let go to slide, just keep holding)
The phone will turn off (in time, but screen will look like it has some white lines)
Keep Holding
When you see the Apple Logo, you can let go.
Turning off via the Slide to Turn off while good and fine to turn off, is more like the Sleep Mode on a computer. Thus any locked up issues in memory remain when you turn back on. A reboot as described is like doing a real Turn off and Turn On on a computer. -
Does any one know what is wrong with my iphone 4 camera not working?
when I use my Iphone and want to take a picture I cant because often times my camera on the back doent work and when it does I cant get the selfie camera to work at all. I like using my camera on my phone I am an avid camera user because I am a part time photographer. But I cant use it at all I have done all the resets there are available I have put it in DFU mode and erased everything and hoped that this worked but not relief. I did this only 8 times and still doenst work does anybody out there have this same problem and think it may be hardware related because I am about to have someone (apple ccertified) open it up to see if it is the camera ribbon cable that might be loose. Is anyone else upset with this issue if they have it? I know I am.
Hi EMT-B,
It sounds like you have done all the troubleshooting needed to narrow down your issue with the iPhone camera to hardware. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
Apple - Support - Service Answer Center
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
You may need to change the country when you get to the page.
Thanks for using Apple Support Communities.
Best,
Brett L -
Isight camera not working after the last update
After reboot of the last OS update
Isight camera not working...
i've tried photobooth, ichat, skype and it doesn't show up anywhere. in fact, when i go to system profiler, it doesn't show isight under USB connections at all.
just to give you a recap of what i've tried so far:
* restarting (obviously)
* resetting PRAM/SMC (by booting it the way it was specified in the isight troubleshooting thing)
* just shutting down my computer and taking the battery out for several hours
any Help pls
because i mast to use it as soon as possible in a conference*A few suggestions.........*
Try running repair permissions from your HD and afterwards run +repair disk+ from your software install DVD.
my isight camera is not working-not recognized with photo booth or ichat
To fix your iSight, shut down computer. Reboot in safe mode (press power button and then hold shift key down). After computer boots, restart again. Hopefully, your iSight will start working again. -
Camera was WOrking fine untill now but it wont start now...
error messages:
-the camera cant be started
-flash mode change failed
-scene mode change failed
and now LED Flash is also not working, i.e. it wont glow as a torch.
what i have tried by now:
1-restarting many times with and without memmory card
2-removing sd card and reinserting
3-factory resetting
4-reloding OS
5-restarting using the volume up and down buttons
6-opening camera via video app
nothing seems to be working
no other app is installed except whatssapp which has permission to use camera.
now what to do??nothing happens... still the same problem...
even denied every permission to whatsapp but still camera is not working,
http://imgur.com/d2PInw1
plz check this image, how do you explain these multiple scene selection options?? -
945P Platinum IDE 2 & IDE 3 works in PIO MODE?
Hello there, I just Bought MSI 945P Platinum M/B and Intel Pentium 4 D @2,8Ghz with 1Ghz RAM, 80GB SATA2, 4 CDRW drives (PATA) where 2 of them I plug in to IDE1 slot(known as RAID, but i configured it to IDE function in BIOS) and the others are in IDE2 slot. I used winxp with the all M/B driver installed, everything's seems ok in device manager, the problem is when I use nero for burning with multiple recorder activated, the windows then going extremely slow in any response even with the mouse movement that it seems windows is running out of system memory. Then I check the device manager and I found that IDE2 run in PIO Mode, IDE1 run in UDMA Mode2.
It didn't make any changes when I used IDE3 slot, it run in PIO MODE either.
How Can I configured The IDE2 & IDE3 to works in DMA mode? I've try any combination in BIOS Setup... it didn't work??
HELP, any advice would be appreciated THX...PCI Bus Mastering already enabled since the 1st time I configured the bios, I'm using 2 pieces thermaltake IDE round Cable that plugged in to IDE 2 & 3, IDE 1 using cable that came with the board. I'm using 4 LiteOn PATA Writers and Seagate 80Gb SATA2 HDD plugged in SATA1 port.
1st configuration, 2 writers are in IDE 1 & the others are in IDE 2
2nd configuration, 2 writers are in IDE 1 & the others are in IDE 3
3rd configuration, 2 writers are in IDE 2 & the others are in IDE 3
All above configuration make the same result, IDE 2 & 3 Won't run in DMA mode
I've try to switch the thermaltake cable to IDE1 and it's work fine (DMA still on).
It doesn' t matter how I configured the BIOS (SATA to combine, enhanced, or AUTO) IDE2&3 still in PIO Mode. -
Old macbook pro3,1 (2.4 GHz Intel Core Duo) camera not working with Mavericks
I have an old macbook pro3,1 (2.4 GHz Intel Core Duo, I think 2007), builtin camera not working and I think it is related to mavericks update.
Anyone had the same problem, and if yes what is the solusion?Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo). -
Camera not working and speakers not working
My camera on my droid razr quit working it just keeps saying camera cannot initialize...has anyone else had this problem and if so what did you do about it?
(it also doesn't work on safe mode).
Also, my speakers are not working. I can't play music but sound works during phone calls/notification and on speaker phone.
This all happened after I downloaded the latest update a few months ago.
ThanksLiz have you Tried one of the Following, 1. A power cycle press and hold Power + Lower volume for 20 to 30 Sec. phone will shut off after the 20 to 30 sec. hold let off and let the phone re-power, 2. If that doesn't help the issue try a System Cache Clear, If the Issue after those two suggestion still is there then you may need to Factory Reset.
But try the First suggestion first and if takes care of the issue let me know if that did work.. i'll be on for a while b33
Maybe you are looking for
-
Problem with JFrame (I'm thinking) from enother java program
Hi, I'm using jasperReport and running viewReport from my java application. JasperPrint jasperPrint = JasperFillManager.fillReport( jasperReport, parameters, conn); JasperViewer.viewReport(jasperPrint, true); M
-
Wk 8 - Video of the week: Improving speed with a B...
Hi Everyone This weeks video shows you how to fit a BT Accelerator. Extension wiring around your home can affect your broadband speed. Fitting a BT Accelerator (which you may also have heard called an iPlate) can really help improve it. To view our
-
When will be the new iPod touch be available in the Philippines?
According to Online Apple Store, they are going to ship this October but they don't include an exact date. If you know when, please help me. And I hope it is not going to be on November. Thanks.
-
Find actual %%EOF end of file
I am trying to identify a PDF-file in a binary data stream. I realize a PDF starts with %PDF and ends with %%EOF, but since there can be multiple %%EOF markers in one file, how do I determine the actual file end? For technical reasons, I would prefer
-
I have an interrupted download of music that has left me with song titles in I-tunes with no content that are not deletable. If I download again I end up with doubles on the list with only one having content. How can I get rid of the blanks?