Camera Issues -- Flash light

All the pictures I took with the flash light were covered by a white layer.  My Z1 has been updated to the most recent version.  I tried to use the auto-mode or manual mode.  I always get a white layer, like I am in the fog on all my picture.  
Please help!  

Well, me and my friends were testing this phone and out of 20 people 2 had this problem i was one of them
... we all had same model of black xperia z1.
I managed to get to the bottom of this .... i think. First of all if u have additional case cover with too small "window" around the lens or additional protective foil the problem is getting even bigger.... foil transports more light fom flash so check if the photo is better wothout additional protective foil or case cover (im not talking about original one).
Anyway....
My phone has silver border around the lens and i had same problem over and over again. Sometimes when i restarted it i managed to get few pictures of god quality.........one day i just painted this silver border with thin black marker with caution and....viola.... problem dissapered... funny thing because out of 20 same models ony 2 experienced same problem ... all looked the same, dunno maybe flash is brighen on those 2 mabe some other problem ....anyway i know its not the best solution and it but it helped me. cheers

Similar Messages

  • After instaling the ios 8.2 my camera and flash light stoped to work. I have a iphone 5c.

    iPhone 5c
    ios 8.2
    camera and flash light stoped to work

    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • Yet another iPhone 4 camera issue - flash positioned too close to camera!

    I have noticed photos taken with flash leave a bloom of white light on the left side of the photos. Seems to be the glare due to the fact the flash is positioned so close to the lens! There are no 'divider' between the 2.
    Usually on other phones, the lens and flash are hollow to minimise this effect, on the iPhone 4 both are on a flat surface and 2mm away from each other which exaggerate the problem even more!
    This problem seems to resemble similar issue with the N97.
    Why didn't Apple put the flash away from the lens to avoid this issue?
    Sample 1 without flash:
    http://venomrush.eu/apple/sample1_nonflash.jpg
    Sample 1 with flash:
    http://venomrush.eu/apple/sample1_withflash.jpg
    Sample 2 without flash:
    http://venomrush.eu/apple/sample2_nonflash.jpg
    Sample 2 with flash:
    http://venomrush.eu/apple/sample2_withflash.jpg
    Message was edited by: Venomrush

    I thought this was a problem when I first used my flash, but realized I had my finger too close to the flash and it was reflecting off of my finger.. Just make sure the light is not bouncing off of something in the environment that is close to the LED i.e. fingers..

  • Nokia C5 flash light issue

    Hi, First i set the flash light off to capture images in daylight.It worked fine.I exited the camera then and reopened it.Now i tried to take a picture using camera and flash light was on now. Why the camera is not able to remember its previous flash light mode....

    I love my C5 .
    My phone does not have flash light issue .
    I brought it from US directly to my home town .
    And this was only possible with the help of http://www.viaddress.com) The Global Leader in Package Forwarding.
    This company is very cheap and relieble too .
    I really recommend you all for shopping from US
    Thanks
    Attachments:
    donkey.jpg ‏33 KB

  • Camera flash light issue

    I have purchased Xperia Z1 in Feburary 2014 and having flash light issue in Photos. If i click without flash then image comes fine but if i click with flash then at the bottom of Image(flash side) there is a extra light comes which is flash light. And that flash look more ugly if i click in low light enviroment. I used all of settings (Auto, Daylight, Night Scene). In all setting if i click in low light there is extra flash comes in Image.
    Note : My Xperia is full update using sony update.

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    I suggest that you have your phone examined by a service center. Please contact your local Xperia support team for more information:
    http://www.sonymobile.com/global-en/support/contact-us/
    What are your thoughts about this forum? Let us know by doing this short survey.

  • HP Photosmart C7280 Power issue with flashing lights

    I have seen many posts on the web regarding flashing lights and incorrect shut downs.
    http://h30434.www3.hp.com/t5/Other-printing-questions/Photosmart-C5180-Power-Up-Power-Down-Problem-L...
    I have tried everything including the "*,#" with "1,2,3" to reset the printer and I have the power cord plugged into a direct outlet, not a power strip, and nothing works.  Even if I do get the printer reset and it works, shortly later the lights will start flashing again and I see a blue screen with a power button symbol and some varying code (00729C98) - it varies each time.  It flashes after a short time even if I power down correctly - all on its own if plugged in.  Is there a defect with faulty part on the control board?  If so who do I take it to to get it fixed?  The printer is less than 2 years old.

    I recently had the same problem with an HP Photosmart C7280, the same model as yours. I eventually managed to get through to HP Technical Support, and they advised that the unit would have to be replaced. I think if you call through, you can get a refurbished model for a cheaper rate.
    Before calling technical support, I tried all the steps that have been recommended in various posts, but nothing helped. To the best of my knowledge - and I really tried to get my printer working - the unit is dead.
    (Although this is an old post, I came across it when trying to fix the same issue. So, hopefully this will help anyone else who stumbles upon this post. Some other codes my printer showed on the HP "blue screen of death" were B83FCB56, B0075110 and B02BAEC3.)
    Regards
    Tim

  • HT2090 hello, my eyesight issue happens occasionally, from time to time i run multiple apps that use the isight camera. when i close each app the isight camera's green light is still active. When that happens the only way to stop the isight camera is to r

    hello, my eyesight issue happens occasionally, from time to time i run multiple apps that use the isight camera. when i close each app the isight camera's green light is still active. When that happens the only way to stop the isight camera is to reboot.
    Is there a way to use activity monitor to identify and kill the process controlling the isight? My apologies in advance if this sounds windows (task manager) like.
    Thanks

    tqtclipper wrote:
    hello, my eyesight issue happens occasionally, from time to time i run multiple apps that use the isight camera...
    http://support.apple.
    com/kb/HT2411: Your camera can be used by only one application at a time.
    (Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
    tqtclipper wrote:
    ... Is there a way to use activity monitor to identify and kill the process controlling the isight? ...
    http://support.apple.
    com/kb/PH5147:  You can quit any process you can see in those listed in the window that opens when you use Activity Mornitor's 
         Window >
    Activity Monitor
    menu command.
    Message was edited by: EZ Jim
    Mac OSX 10.8.3

  • I can't find flash light in my i pad 3 camera!!! what can i do?

    Why there is no flash light in the i pad 3 camera ? What can i do?

    There is no flash on the iPad's cameras.

  • My 4s camera flash light wont turn off and camera is not working

    my 4s camera flash light wont turn off and camera is not working

    Hello there, Shantae2231.
    You may just want to try resetting your phone per the instructions in this Knowledge Base article (There is no data loss by performing this step):
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My iphone 4s get wet in water yesterday and now back flash light get stuck and camera also will not open what happen to it ? will you please help me ?

    my iphone get wet in water yesterday and back camera flash light get stucked, how can i recover it ? please help me ?

    What happened is it got wet.  Water and electronics don't go well together.  You need to switch it off and bury it in bag of dry rice for a week at least.  This may or may not work - but continuing to try to use it in its current state will kill it for sure.  You can enquire at an Apple store about out-of-warranty replacement, depending on where you are.

  • Incoming call: camera flash light blinking

    Hi,
    After i completed "Reset All Settings" on my iPhone 4S (iOS 5.0.1), i then always get camera flash light blinking every time i receive the incoming call. I want to turn this off by trying Setting --> General --> Accessibility --> LED Flash for Alerts (turn off), however, it does not work for me. i still get the LED flash blinking everytime i get the incoming call and this is very annoying.
    Could you please advise how to get this fixed?
    Thank,
    sanlen

    Hi,
    I tried it but it did not work for me. Any further advise please.
    Thank,
    sanlen

  • TS2634 the flashing light next too the camera is stays on,can anyone help me with this problem.thanks

    the flashing light next too the camera is stays on,can anyone help me with this problem.thanks

    Basics from the manual are restart, reset, restore.  Have you tried these?
    Have you read the manual?

  • Can you take pictures while having your flash light on, instead of using your camera's flash?

    Hello I have a 5s and want to know if you can take pictures while having your flash light on, instead of using your camera's flash? Having a constant light seems like a better way to take pictures. If this is possible how? Do I need certain apps? or just adjust settings? Any help would be much appreciated. Thanks Pat

    The Flashlight uses the camera flash as its source of light.  You are in fact using the flahslight when you take a picture with flash because they use the same light source.
    The Flash is timed to light the picture when the camera snaps the photo. 

  • Flash light is not working in camera or Torch after upgrade

    Hello
    My S850 Flash light is not working while I click any Picture or while turning the torch ON. It was wprking perfectly before but after Upgrade it stopped working.
    baseband version is: S850.ROW.V109,2014/09/23
    BUILD NUMBER: S850_ROW_211_140923
    Kalpesh

    Hi
    Sorry...The flash isn't working when you take pictures or the torch/flashlight isn't working?
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Camera flash light stayed on

    Had my nokia lumia 1020 4 days.After last charge the flash light stayed on,even when turned off.Got extremely warm.Then shut down.Cannot turn on now.Any one else had this problem?

    Hi, Ernie5. Welcome to the Nokia Support Discussions! This seems to be an isolate case. Have you tried to press and hold the volume down and power keys? You can also try to charge the phone to make sure that it has enough battery left on it. Keep us posted on the outcome. Thanks!

Maybe you are looking for

  • Using delete and FOR ALL ENTRIES

    Hi, We have a error message regarding the following code : Delete FROM TABLE FOR ALL ENTRIES IN lt_TABLE WHERE TABLE_KEY1  = LT_TABLE_KEY1 Could we use the For All entries with "Select" ? For information, the error message is "Unable to interpret "FO

  • Is this even possible with Bridge?

    I do alot of work with Photoshop and some other products but am new to Bridge.  I've been tasked to use Bridge to find a specific type of TIFF file that is being generated by one of our legacy patient record systems.  It isn't in a standard TIFF form

  • Javascript and Struts HTML problem

    Hi all, I write the following script in my jsp page, but this one does not produce the output at all : <script type="text/javascript">      document.write("<input type="button" value='<bean:message key="btn.show"/>' onclick='onShowClick(this.form,"<b

  • How can I change over hardware registered with one apple ID to a different ID

    I seem to have created a number of Apple Ids over the years. Is it possible to have all my hardware registered to the one ID?

  • Changing date format in EP 5.0

    Hi, I am working on EP 5.0 on ITS Server .For designing GUI i am using HTMLB with jsp . When i choose the date from date picker(calender in this case) it comes in the format mm/dd/yyyy  . But the requirement is like when i choose date , on the screen