Camera keeps freezing up

I have an Iphone 4 and the camera keeps freezing up. I have other apps for taking pictures as well and they too freeze up. Sometimes i can take one pic before it happens and other times cant take a pic at all. It was working fine for 6 months.

Hello Bevy73,
I would recommed sections 1, 3, and 5 of the iPhone Troubleshooting Assistant found here http://www.apple.com/support/iphone/assistant/phone/#section_1.
Here is the first section of it to get you started.
Restart iPhone
To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
If your device does not turn on or displays a red battery icon, try recharging next.
If the issue is to do with software, these steps will resolve it.
Take care,
Sterling

Similar Messages

Macbook camera keeps freezing

when i use skype the camera keeps freezing and repeating the last pics.

See KB Article: http://support.apple.com/kb/HT2090 How to Troubleshoot iSight

PLEASE HELP!!!!! I just updated my iPhone 5 with iOS 8.1.3 & camera keeps freezing (blurred) . HELP!!

PLEASE HELP!!!!! I just updated my iPhone 5 with iOS 8.1.3 and now my camera keeps freezing (blurred) - not just the rear camera but the camera software. I have seen way too many other posts about this same issue to have a hardware issue. HELP!!

To ensure it is not software
Restore as new and see if fault persists if not then you can recover your back up to get back to normal

HD Camera keeps freezing

Is anyone having the same problem?
It has never happend before, but my camera keeps freezing and everytime I move it freezes and it goes purple.
I have restarted the laptop beofre. Most of the time now it wont even open!
very annoying!
Anyone can help?
Greatly Appreciated,
Thanks

Hello Bevy73,
I would recommed sections 1, 3, and 5 of the iPhone Troubleshooting Assistant found here http://www.apple.com/support/iphone/assistant/phone/#section_1.
Here is the first section of it to get you started.
Restart iPhone
To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
If your device does not turn on or displays a red battery icon, try recharging next.
If the issue is to do with software, these steps will resolve it.
Take care,
Sterling

My iphone5 camera keeps freezing and turning black and purple and becomes fuzzy. I tried to reset it a few times but it didn't work. how can i fix this?

How can i fix my camera that keeps freezinf and turning black or purple? I have already tried reset multiple times and it didnt work.

Hello there mmon11,
If by reset you mean this process from iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting from here http://support.apple.com/kb/ht1430
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
Then alright thats one step down. I would recommend this article as well, specifically sections 1, 3, and 5 which will resolve it if the issue is due to software.
iPhone Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/phone/#section_1
Here is section 1 to get you started.
Restart iPhone
To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
If your device does not turn on or displays a red battery icon, try recharging next.
Regards,
Sterling

My iPhone 5 camera keeps freezing if and when I take a photo I get either a pink screen or pink lines or lens freezes any ideas please

Has anyone else had an issue with their iPhone 5. Camera?
The problem is intermittent and presents as either a total freeze or partial or full pink screen
Is this a known fault and should I take the phone to an apple store for a replacement as it is only 4 months old

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If that didn't help, Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Iphone 6 speaker having echoes! And camera keep freezing. Help!

My one month old iPhone 6 having some problem. First the camera tends to lag or sometimes blackout when I want to take photo. Secondly, the speaker has echoes. Please assist. Am I eligible to exchange for a new unit?

Are you using a case around the phone that covers the microphones? If yes, take it off and try again. Same for protective film on the screen of the phone.
As for the camera issue, did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups

Why does my front iphone 5 on iOS 7.0.2 keep freezing it becomes all blury me it stops working

My iPhones front camera keeps freezing for some reason and I don't have any more warranty someone please help me fix this problem it's getting really annoying

I have an iPhone 5 and every time I get into my car, as soon as my iPhone connects to the bluetooth or if I connect the USB cable, the music starts blaring through the car stereo, even if the radio was off. If I am using any of the navigation apps on my phone (google maps, waze, apple maps), and I happen to be lucky enough to have the voice directions working (that's consistently inconsistent), the music will frequently start by itself during navigation, even if I didn't turn the music on. Sometimes the music and navigation voice over will compete with each other at the same time. Sometimes they both go totally silent. Sometimes I'll hear only music. Sometimes only the voice directions. And if make or receive a phone call while the navigation is working, as soon as the phone call ends, the music will always take over again, even if I didn't have the music on prior to. I've checked and re-checked every setting on my phone, in my apps, in my car, and followed all of the suggestions I've found online (note to Apple - there are tons of posts on this topic), and nothing works.
It seems like there should be an easy software fix for this, or at the very least, options to:
prevent the music from starting automatically every time you connect with a cable or bluetooth (insanely annoying)
allow voice directions to temporarily mute music, should one choose to be listenting to music and navigating at the same time
just listen to voice direction - no music!
Better yet, how about just provide options to let the end-user decide when to listen to music.
For a product that is supposed to be "intuitively easly" and/or "just works", this level of dysfunction shouldn't be acceptable. Come on Apple - what are you doing to fix this???

Macbook air keeps freezing on ichat cam and skype

I have a macbook air that keeps freezing whenever I webcam with someone. How can I solve this problem? It doesn't last for 10 minutes. Is it a hardware problem or the webcam itself? I need a solution for this.

Hi,
the Air tends to run hot when doing video chats. If it gets to hot it turns of one core and thus runs much slower. It might freeze on account of that. Use a temp monitoring tool like iStat Pro to see if that is the problem. If so, try to make it run cool by using it in a way air can vent easily beneath and behind the Air.
Volker

My time machine keeps freezing when I am backing up

I have recently purchased a seagate 1.5TB external hard drive and am trying to back up my computer using time machine.
My compute is 56GB large.
I have tried 3 times and have been forced to stop it everytime because it keeps freezing.
What should I do?
It says it is compaitble with USB 2.0 and 3.0
My MBP is from late 2011 and I think it is 3.0 yet when it does backup a bit it doesnt do it particularly fast then it pauses.

If you have a late 2011 MBP, then you have USB 2.0 ports. Only the mid-2012 models came with USB 3.0 ports. Is your Seagate a USB 3.0 model? It should be backward compatible with your machine; you just won't acheive USB 3.0 speeds. How did you format your drive? To use with Time Machine, it must be formated as "Mac OS Extended (Journaled)".
I'm suspecting (and rather hoping) that it's just a formatting problem. Try using Disk Utility to reformat the drive as "Mac OS Extended (Journaled)" in order to work with TM.
Good luck,
Clinton

My MacBook Pro is extremly slow and keep freezing after upgrading to Yosmite, please advise

My MacBook Pro is slow after updating to Yosmite it keep freezing and Safari most of the time not responding, generally speaking the performance is way worse than Mavericks when it was installed and here is my config:
EtreCheck version: 2.0.11 (98)
Report generated December 1, 2014 at 12:53:23 PM GMT+2
Hardware Information: ℹ️
    MacBook Pro (15-inch, Mid 2012) (Verified)
    MacBook Pro - model: MacBookPro9,1
    1 2.6 GHz Intel Core i7 CPU: 4-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    Intel HD Graphics 4000 -
        Color LCD 1440 x 900
    NVIDIA GeForce GT 650M - VRAM: 1024 MB
System Software: ℹ️
    OS X 10.10.1 (14B25) - Uptime: one day 16:9:57
Disk Information: ℹ️
    APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
    S.M.A.R.T. Status: Verified
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / [Startup]: 748.93 GB (80.35 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 749.30 GB Online
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Configuration files: ℹ️
    /etc/hosts - Count: 60
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [not loaded]    com.ZTE.driver.ZTEUSBCDCACMData (1.3.0) Support
    [not loaded]    com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.0) Support
    [not loaded]    com.nike.sportwatch (1.0.0) Support
    [not loaded]    com.novatelwireless.driver.3G (3.0.7) Support
    [not loaded]    com.novatelwireless.driver.DisableAutoInstall (2.0.6) Support
    [not loaded]    com.option.driver.Option72 (2.15.0) Support
    [not loaded]    com.option.driver.OptionHS (3.26.0) Support
    [not loaded]    com.option.driver.OptionMSD (1.21.0) Support
    [not loaded]    com.option.driver.OptionQC (1.11.0) Support
    [loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.74) Support
    [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) Support
    [not loaded]    com.vodafone.driver (3.0.5) Support
    [not loaded]    de.novamedia.driver.NMLGEDriver (3.2.10) Support
    [not loaded]    de.novamedia.driver.NMSamsung (0.0.2) Support
    [not loaded]    de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1) Support
    [not loaded]    de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) Support
    [loaded]    net.telestream.driver.TelestreamAudio (1.0.5 - SDK 10.6) Support
        /System/Library/Extensions/NMHuaweiPhonesVTPCDC.kext/Contents/Resources
    [not loaded]    de.novamedia.driver.NMUSBCDCACMData.VTP (3.2.6) Support
        /System/Library/Extensions/NMLGEDriver.kext/Contents/PlugIns
    [not loaded]    de.novamedia.driver.NMLGEUSBCDCACMControl (3.1.9) Support
    [not loaded]    de.novamedia.driver.NMLGEUSBCDCACMData (3.1.9) Support
        /System/Library/Extensions/NMSamsungDriver_106.kext/Contents/PlugIns
    [not loaded]    de.novamedia.driver.NMUSBCDCACMControl (3.2.12) Support
    [not loaded]    de.novamedia.driver.NMUSBCDCACMData (3.2.12) Support
        /System/Library/Extensions/NovatelWireless3G.kext/Contents/Plugins
    [not loaded]    com.novatelwireless.driver.3GData (3.0.7) Support
        /System/Library/Extensions/Vodafone.kext/Contents/Plugins
    [not loaded]    com.vodafone.driver.Data (3.0.5) Support
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [loaded]    com.adobe.CS5ServiceManager.plist Support
    [running]    com.nike.nikeplusconnect.plist Support
    [loaded]    com.oracle.java.Java-Updater.plist Support
    [running]    com.rim.BBAlbumArtCacher.plist Support
    [running]    com.rim.BBLaunchAgent.plist Support
    [running]    com.vsearch.agent.plist Support
    [failed]    de.novamedia.VodafoneDeviceObserver.plist Support
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist Support
    [invalid?]    com.adobe.SwitchBoard.plist Support
    [running]    com.autodesk.backburner_manager.plist Support
    [running]    com.autodesk.backburner_server.plist Support
    [loaded]    com.autodesk.backburner_start.plist Support
    [loaded]    com.microsoft.office.licensing.helper.plist Support
    [loaded]    com.oracle.java.Helper-Tool.plist Support
    [loaded]    com.oracle.java.JavaUpdateHelper.plist Support
    [running]    com.rim.BBDaemon.plist Support
    [not loaded]    com.vsearch.daemon.plist Support
    [running]    com.vsearch.helper.plist Support
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [loaded]    com.BlueStacks.AppPlayer.LogRotator.plist Support
    [loaded]    com.BlueStacks.AppPlayer.Service.plist Support
    [loaded]    com.BlueStacks.AppPlayer.UninstallAgent.plist Support
    [loaded]    com.BlueStacks.AppPlayer.UpdaterAgent.plist Support
    [loaded]    com.facebook.videochat.[redacted].plist Support
    [invalid?]    com.jdibackup.JustCloud.autostart.plist Support
    [invalid?]    com.jdibackup.JustCloud.signup.plist Support
    [running]    com.nero.HSMMonitor.plist Support
User Login Items: ℹ️
    uHD-Agent    Application (/Applications/BlueStacks.app/Contents/Runtime/uHD-Agent.app)
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Dropbox    Application (/Applications/Dropbox.app)
    SpeechSynthesisServer    Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
    uTorrent    Application (/Applications/uTorrent.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
    Default Browser: Version: 600 - SDK 10.10
    AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
    AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
    Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
    net.juniper.DSSafariExtensions: Version: (null) Support
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
    Silverlight: Version: 4.1.10329.0 Support
    MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
    JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
    BlueStacks Install Detector: Version: 0.3.6 - SDK 10.7 Support
Safari Extensions: ℹ️
    Awesome Screenshot
3rd Party Preference Panes: ℹ️
    Flash Player Support
    FUSE for OS X (OSXFUSE) Support
    GoPro Support
    Growl Support
    Java Support
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        42%    firefox
         9%    WindowServer
         4%    system_profiler
         2%    hidd
         1%    plugin-container
Top Processes by Memory: ℹ️
    1.44 GB    firefox
    215 MB    Viber
    155 MB    softwareupdated
    146 MB    mds_stores
    146 MB    WindowServer
Virtual Memory Information: ℹ️
    206 MB    Free RAM
    3.39 GB    Active RAM
    3.14 GB    Inactive RAM
    1.16 GB    Wired RAM
    21.12 GB    Page-ins
    790 MB    Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Satellite L300 keeps freezing

My laptop keeps freezing ... it doesn't always happen, but it's started happening regularly over the past few weeks, where all programs stop responding and I can't open Task Manager, so the only thing to do is to turn the power off.
I tried restarting in Safe mode, and did a System restore, which seemed to work temporarily, but it started happening again, and even doing another restore hasn't fixed the problem. My laptop is only 8 months old and has up-to-date Norton antivirus running; I've done comprehensive virus scans but haven't picked up anything. The freezes don't seem to be brought on by any particular software - they just happen randomly, sometimes after an hour or two, sometimes not at all, and sometimes quite soon after I start the computer.
I've also run the Toshiba Assist PC Diagnostic tool which came with the computer, and that didn't pick up any problems with the hardware. It seems likely to be a software rather than a hardware problem, but I can't think of anything I've installed recently that would cause any issues, and also the fact that no program in particular brings on the freezes makes it hard to determine what the problem is.
Other than the Diagnostic tool, the system restore and running Norton, I don't know what to do!
My system is a toshiba satellite L300, running Vista Home Premium SP1, core 2 duo 2.00GHz processor, with 2GB RAM.
Any suggestions??
Thanks!

Hi
First of all I recommend removing the Norton Antivirus because this tool needs a lot of hardware resources and slow downs the system.
Instead of Norton you could use the Avira Antivir.
This software is free and can be downloaded from different pages. I use this too and Im really satisfied.
Furthermore you should check if such freezing are not related to the high temperature.
You could clean the ventilators using compressed air spray. It will help you to remove the dust from the cooling fans and grilles.
Check it!

My macbook pro (August 2010) keeps freezing when apple mail starts up. This happens every 2nd time I turn on my Macbook Pro. This forces me to hold down the power button to restart my Macbook Pro. Does anyone else experience this, and is there a fix? Thx

My macbook pro (August 2010) keeps freezing when apple mail starts up. This happens every 2nd time I turn on my Macbook Pro. This forces me to hold down the power button to restart my Macbook Pro. Does anyone else experience this, and is there a fix? Thx.
since upgrading to OS lion, my mac book pro (2010 August) keeps freezing (non responsive, requires restart) when i turn on my mac and the system is trying to open apple mail. while apple mail is attempting to collect new mail, the macbook pro freezes. this happens every 2nd time i try to start up my computer. this only started happening after i upgraded to OS lion. please let me know what I need to do to fix this. being forced to restart every 2nd time i turn on my macbook pro has been very frustrating. not sure if apple mail is also the cause of my macbook pro for being very slow during start-up (on the occasion the computer doesn't freeze).

I am having similar 'freezing' problems with many programs (Mail, Safari, iTunes, etc.). I have done a clean install of Lion instead of an upgrade when it came out. Perhaps something went wrong with my install? I'm thinking about wiping and reinstalling.

My laptop keeps freezing when i start it up

I posted this on my phone, by the way, since I couldn't even open up Google Chrome without my laptop freezing.

For some apparent reason, my laptop keeps freezing right when I start it up. When I type in my password and my desktop screen comes up, I try to go to control panel to uninstall an adobe software I had downloaded but caused my laptop to lag (I downloaded it from the adobe website, itself). But right when the control panel windows comes up, and I try to move my mouse around a bit (I use an external mouse thing), my laptop freezes right there. I tried to go to McAfee to scan for viruses just in case but it froze when the windows came up as well. I tried doing the ctrl + shift + esc thing and I don't think anything's going wrong but when the window comes up and I move the mouse around a bit, my laptop freezes. Nothing's overheating and dusty or anything. And no matter how many times I tried to force shut my laptop down by holding the power button until it turns off, it still freezes every time. Someone please help me troubleshoot this.

Clean install on new 1TB hdd, Yosemite keeps freezing when copying data from an ext drive and also from a usb

Hi all,
I'm trying to figure out why my macbook keeps freezing when I try to drag my data across to it (even small files from a USB).
I've had to force restart over a dozen times today :/
I ran EtreCheck and there are a couple of issues (I've no idea what they mean).
If anybody could share some light into the report below I would be very grateful:
Problem description:
Macbook Pro mid 2010, Yosemite, blank new install on 1 TB hdd, keeps freezing when copying data from an ext drive and also from a usb
EtreCheck version: 2.2 (132)
Report generated 5/2/15, 4:55 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2010) (Technical Specifications)
    MacBook Pro - model: MacBookPro7,1
    1 2.4 GHz Intel Core 2 Duo CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery: Health = Normal - Cycle count = 2061 - SN = W013358KQD3BA
Video Information: ℹ️
    NVIDIA GeForce 320M - VRAM: 256 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 0:7:25
Disk Information: ℹ️
    ST1000LM024 HN-M101MBB disk0 : (1 TB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 999.35 GB (968.00 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    HL-DT-ST DVDRW GS23N
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple Internal Memory Card Reader
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Inc. Apple Internal Keyboard / Trackpad
Gatekeeper: ℹ️
    Mac App Store and identified developers
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.mtrecorder.plist
Launch Daemons: ℹ️
    [failed]    com.apple.spirecorder.plist
User Launch Agents: ℹ️
    [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    Caffeine    Application (/Applications/Caffeine.app)
Internet Plug-ins: ℹ️
    Default Browser: Version: 600 - SDK 10.10
    QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
    None
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        20%    WindowServer
         6%    com.apple.WebKit.WebContent(7)
         4%    Safari
         3%    hidd
         1%    launchd
Top Processes by Memory: ℹ️
    1.07 GB    com.apple.WebKit.WebContent(7)
    439 MB    kernel_task
    90 MB    spindump
    57 MB    mdworker(5)
    57 MB    Safari
Virtual Memory Information: ℹ️
    4.54 GB    Free RAM
    3.46 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    May 2, 2015, 04:47:31 PM    Self test - passed
    May 2, 2015, 01:39:52 PM    /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-05-02-133952_[redact ed].cpu_resource.diag [Click for details]
    May 2, 2015, 01:23:20 PM    /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-05-02-132320 _[redacted].crash
Regards
Hoz

Thanks - I had a 1TB hdd in my macbook for about 12 months but it started playing up a few days ago (I got the question mark folder on bootup) so I bought another 1TB hdd (same model) and started from scratch.
My macbook is an early 2010... now I'm wondering if Yosemite is a bit too much for it?
The ext hdd is my timemachine backup, so yes I have used it often and it has my TM backups - and the usb is a new usb which Ive used a few times.
The issue seems to be when Im transferring files from an ext drive to my mac. I can use it fine and browse (worked find for 45 mins) then I tried to bring my data across.. and it copied a few gig over before total freeze.
This has happened about a dozen times.
I keep running disk utility and checking the disk. I also just ran the apple diagnostics tool that came in the apps cd - the hardware apears to be fine.
I have a 250 gb partition for the OS and the rest is my second partition for data.
I'm now wondering if I should reformat the first partition, install leopard from the CD, then upgrade to mavericks and leave it at that.
Any thoughts would be awesome. Thank you for reading and replying!
Hoz

Camera keeps freezing up

Similar Messages

Maybe you are looking for