Camera keyframing issue

I have keyframed camera movement.
When i go into the keyframe editor to edit specific parameters of a camera keyframe location, it applies this change uniformally to all the keyframes in the sequence.
ie) if i increase the x axis point of a particular keyframe then it increase every other keyframes x position the same amount and distorts the entire composition...
Any help on the matter would be greatly appreciated
thanks

How are you changing the keyframe? If you are dragging on the motion path in the Canvas, you need to have the playhead parked on the keyframe you want to change.

Similar Messages

Multi Cam Flicker Issue - Premiere Pro CC 2014

Multi Cam Flicker Issue - Premiere Pro CC 2014 can any one help me pls

Hi,
This might help :
Go to File > Project Settings > General and change the Video Renderer to Mercury Playback Engine software only. Click OK and select Delete Previews.
Thanks,
Rameez

As being a novice with my Mac Pro computer and Cannon 5D mark 3 camera my issue has arisen while over the last year and half, when down loading into my Photoshop Lightroom 4, my 18,000 photograph were not catalogued correctly, or hardly at all, so now ov

As being a novice with my Mac Pro computer and Cannon 5D mark 3 camera my issue has arisen while over the last year and half, when down loading into my Photoshop Lightroom 4, my 18,000 photograph were not catalogued correctly, or hardly at all, so now over several months time my photos have apparently been redirected in my libraries and have begun not appearing in their allotted frames next to their number in the library they are in. they also have a small question mark (?) next to the photo space. The frames are blank but indicates that there is a photo there. The majority of photos are blank but about a tenth are seen . i apparently need to retrace where they went but do not know how to get that done . can someone help please?

It would be difficult to tell you where to begin. If you moved photos around to different folders and didn't use Lightroom to move them, that would cause Lightroom to lose track of where they are. You have to remember that your images are not "in" Lightroom. Lightroom simply points to them wherever they are on your computer. All of the location information as well as the changes that you make to your images is stored in the catalog, which is a database. This catalog is central to the operation of Lightroom, and it's essential that you understand how it works and how to make it work for you. For all of those images that have "?" On them, or the folders that have the same, you will have to go through the process of locating them and showing Lightroom where they are located. With 18,000 images, and many of them missing, it might just be easier to start a new catalog and organize things properly from the beginning in that catalog.

Galaxy S6 Camera flash issue

Has anyone else experience the camera flash issue that is posted on the web? I'm experiencing it on my Black 64GB version. Never had an issue until I opened the camera app for the first time..It was at night so when I turned the camera off I kept noticing this faint light on the back. I thought it was just the brightness of the yellow of the flash because it is bright, but when I went pitch black, I can still see the faint glow of the camera flash. It will not cut off. I've turned the phone completely off and it still shows....It is definitely draining my battery and it's starting to bother me. Just curious if anyone else noticed. According to the web, samsung is aware and working on a fix for it.

No problem...No, I was not able to resolve issue. The temporary fix is to
wipe the phone and then not use flash on your camera or the flashlight; for
me that defeated the purpose...I just continued to return the phone until I
received one that doesn't have the issue...took me 2 exchanges but I think
I've found one that doesn't have that issue.

Keyframe interpolation/wobbly keyframe issue

I was recently doing a test video with Trapcode Form. It was fairly simple, the particles behave in a few different ways with a camera getting closer and moving along the particles. However, whenever I try to keyframe the camera movements (either directly using the camera, or parenting it to a Null), I run into a few issues that I can't get rid of. For one, as soon as I activate a keyframe for one aspect of the camera or Null, when I change that aspect, the Preview image doesn't update. The camera will remain as it was, though occasionally it will update when I try to RAM-Preview. If it does work, and I try anything more than just two keyframes, the keyframes don't behave correctly at all. They get the infamous wobble and the camera changes sporadically where there aren't any keyframes. This only applies to Cameras and layers that I parent Cameras to. I don't have the same issue with other 3d layers. I have tried changing the keyframe spatial interpolation to Linear on all the keyframes, but they are either already linear, or it doesn't fix the problem. In my preferences, I even set my default spatial interpolation to Linear, yet still to no avail. I have restarted the project from scratch and still have the same problem every time. I posted this on CreativeCOW and one guy offered to open/render my file to see if it worked on his PC. He said he didn't have any issues, and that it rendered just fine. Any ideas of what the issue could be? I've been searching everywhere and can't seem to find anyone with a similar problem.

First, turn off disk cache. Second, purge everything. Third, restart AE. If that doesn't fix it reboot.
This almost certainly is a cached frames problem and not in some weirdness with the camera movement. If you look at the camera in another view you'll see that the camera is moving properly along it's path.

Camera keyframes: How can I make them visible? (please read)

I'm making the camera move around in the x and y dimensions. I've set up the keyframes and sure enough the camera travels along the path I defined.
Now, what I want to do is have access to the points which define the camera's path, so I can use the pen tool to edit them. Apparently this is not straightforward the way it would be for a solid layer. I can't get them to appear, no matter what I try.
Yes, the keyframes are there. Yes, the current-time-indicator is atop one of them. Yes, I have the position variable selected, with both keyframes selected. It doesn't matter. I'm missing some non-intuitive step, so that's why I'm here. Please help!

The view was the issue, evidently. Although it's not intuitive, the problem is that a camera's keyframes can't be seen while the view is set to that camera; you have to find a way to change the view to be behind it. Perhaps they'll fix that oversight in a future update.

Buffering and Cam Playback issues

Hi,
I am having real trouble with videos that use Flash Player and also when viewing cams that also use Flash. When watching videos they will only play for a few seconds before having to buffer which makes trying to watch any Flash video a nightmare. This is NOT a Youtube problem as its doing it with any Flash video not just on Youtube. Also when watching a webcam that uses Flash the cam and audio will pause every few seconds before starting again. This has only been happening since the latest update which is the version i'm using. I have Vista 32 bit and using IE 9. Please help as I have a friend that I talk to via webcam and obviously I can't anymore because of this problem.

It sounds like you might be encountering bandwidth issues between your computer and YouTube. The first video test was using HTML5, not Flash. If you encountered stuttering/choppy playback then we know that your performance issue isn't relegated to just Flash Player.
I'd recommend posting on the YouTube forums to see if anyone could recommend a reliable way to test your connection speed. I know YouTube has a speed test, I'm not sure how it works or how to read it properly though.

IPad 3 ios 6.0.1 Causing camera kit issues

Hi there,
I would like to point out that earlier this month we got an update for the iPad 3 to iOS 6.0.1, which I promptly updated mine. Everything was working fine, until yesterday.
Yesterday I had clicked few snaps during the evening and wanted to edit the same on my iPad 3 and transfer the same via the apple SD Card reader camera kit which I have just recently bought a month back. When I connected the SD card reader to the iPad 3, guess what nothing showed up, usually the photo app comes up with the SD photographs.
Apparently the SD card was not recognized by iPad itself. I thought the SD card was faulty so I switched over to the USB connection kit and connected my Nikkon D3000 to the iPad 3 over the usb cable, and guess what, nothing happened here either.
This brought me to the point that, how can both of the connection kits won’t work at the same time, and then it struck me that I had recently done and iOS update to 6.0.1 and that could be one of the possibilities of it not working properly. Normal function of Apple is to kill the old version of the kits / connectors / docks when there is an update of the software, that’s what I have seen and suffered in the past with my docks.
Since my cousin also has an iPad camera kit but is using an iPad 2 with iOS 6.0.1, I used his kit on his iPad 2 and to my wonder the SD Card reader read my memory card and showed up all the photos on the photo app. So I then used his SD Card kit on my iPad 3, after 2 - 3 tries it worked. So at that point I imported all the pics I required.
Now I switched back to my SD CARD READER and tried it on my iPad 3, vola it worked, but it took it time to show up. With few more tries of removing and inserting the connector kit again to check, it worked every single time. I guess the kit I am using got hung or something and just required another one to clean / remove the hang/bug.
Now I wanted the usb connector to work as well, so I used a usb 2 gb Sandisk fat32 formatted stick and made a DCIM folder and added few files from my computer and tried it on, and this time the iPad 3 read the usb stick and showed me the few files on it.
After which I tried to connect the SD CARD reader again to check if it would work after the usb connection, it worked but was apparently showing me the usb stick files on the screen rather than the SD Card pics. On re inserting it, it came back to normal. Same thing happened when I tried the usb connection next time, it would show the SD Card files and not the USB files, but with reinserting it would solve the problem.
And this is the issue I am facing at present, if I use the SD CARD reader first and import my files, the next connection via USB or again SD CARD or via USB and camera cable, it will first show me the images of the previous connection and not the current ones. I have to reinsert it again to clear the old file cache and to show me the new current pics which I want to import fresh.
Soo could you please advice me on the follow:
Why did the connectors did not work at first on the iPad 3 ?
Could there be a bug in the iOS 6.0.1 for the iPad 3, as this problem is not seen on iPad 2?
Do advice.
Connector Details:
USB Connector Model No.: A1358
SD Connector Model No.: A1362
Bought in October 2012.
iPad Deatials:
iPad 3 64gb + Wifi + 3G Cellular, bought in June, Australia Airport.
Thanks and regards,
Aditya Mehra
Mumbai, India.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Camera Keyframes not saved correctly in Motion.

Hey,
I'm currently working on a project in motion with a complex camera-movement which I have created using keyframes. However, every time I close Motion and open the project up again, the bezier curves have all disappeared - leaving very jagged edges. I have absolutely no idea why the keyframes won't save correctly - I'm locking the camera track but nothing with work... any ideas please?!

I've actually discovered that the bezier information is only erased if the camera track is locked - if it is left unlocked all the data remains unchanged. Is there any reason for this??

Bridge NEF view - selected image altered - Camera Raw issue?

I use a Nikon D700 and CS3 Bridge on a MAC OSX 10.4.11, and when browsing NEF images in Bridge there is an action performed on the image whenever I click on it. I use the settings where a filmstrip is along the bottom and upon selection a larger image appears above. Initially the image appears as I recall exposing it and looks balanced with good saturation, but after selection the image brightens and loses saturation after a few moments. When I open the image in Camera Raw I find that the Brightness is set at +50 and the contrast is set at +25, and the Blacks slider is set at 5. When I reset those parameters to zero I do not recover the look of the image as it was before selection in the bridge window. In order to do that I have to raise the saturation, decrease the brightness and do a fair amount of work to get back to the way the image appeared in Bridge prior to selection. Can anyone tell me what is happening to the image in bridge and how to keep the image from changing after I select it, or at least how to find the settings that have been evidently applied to the image? If I right click on the thumbnail first, I find that the image will open in camera raw without any changes being made in Bridge, so I was able to make jpegs that show the difference between the two images. The first image is as it appears before selcting the thumbnail, and the second is the image in camera raw. If I were to have selected the image normally with a left click in Bridge, the photo as you see it in camera raw would have appeared in bridge and not been recoverable to its earlier state. Can someone help me undertand what is happening here? How can I find out what Bridge or Camera Raw is doing to the images and retain the appearance as it first appears in Bridge? Thank you for your help.

This is a common question.
What you see first in Bridge is actually a JPG which the camera has embedded in the NEF, and uses all the camera's color settings (contrast, saturation, etc.). Once you select the NEF, ACR (Adobe Camera Raw) attempts to render its own preview of the NEF. Because ACR does not understand the camera's color settings, it gives you its default rendering, which usually is somewhat different than the camera's.
In newer versions of ACR (5.x), Adobe has profiles which mimic the camera's presets ('Standard', 'Vivid', etc.) and can be applied automatically in Bridge. Unfortunately, you will need CS4 for this version of ACR (and these profiles have some issues of their own, e.g. http://forums.adobe.com/thread/479960?tstart=0). You can also create your own ACR presets to more or less emulate a particular look (I believe you will need CS4 for this as well).

Stream.record() keyframe issues

I have an application that uses server side recording using the Stream.record() method. The source for the Stream class is a live stream that several clients can publish to or view. Only one client can talk at a time but they can stop and start publishing when they like. Stream.record() allows me to handle recording from these different sources into a single server file. The code looks no different that that seen elsewhere on this forum or indeed in the Adobe documentation (FMIS3.0.4) and is something like this;
To start the recording;
application.recording = Stream.get("recorded_stream");
if (application.recording) {
   application.recording.play("live_stream");
   application.record("append");
and to stop the recording;
if (application.recording) {
   application.recording.play(false);
   application.recording.record(false);
And on the client a NetStream.publish("live_stream","live") or NetStream.play("live_stream") are issued depending on whether the client is talking to a group of clients or listening to one of the other clients.
Now this code works provided, it seems, the first recorded section is greater than some interval around 30 seconds otherwise the keyframe metadata (as reported by YAMDI) has large gaps at irregular intervals that cause stalls during playback. You can see in the metadata output from YAMDI that the filepositions are consistent (all the data is there) but as there are large gaps (like up to 20 seconds) in the keyframe entries anything that plays it stalls, also the duration in the metadata includes the gaps.
I have tried using FLVCHECK and it says the files are fine. I have tried making each recorded segment into its own file (with the intention of joining them with FFMPEG post process) but it makes no difference, the playback stall manifests itself as a gap at the start of one of the movies and FFMPEG uses the metadata it finds so it can't help.
The second related issue is that the keyframeinterval and framerate of the recorded file don't relate to those requested by the client at all. In this case I am asking for 15fps with a keyframe every second and I am getting 7-11fps that and 4-5 keyframes per second. Also neither of these figures match the system wide defaults in the Application.xml file. In this particular application the system will be used to record British Sign Language exchanges and I need to keep the framerate and image quality high an although I can understand why the server would want to fix its framerate/interval (as its recording from different client sources) I can't find anywhere in the docs where these values can be set abd the dont relate to the settings in the Application.xml file for this app either. BTW the server running FMS3.0.4 is a quad-core XEON with 16GB through a 100Mbit switch that does nothing else so its not a resource issue !!
Anyone done anything similar or had a simlar problem? I guess the weird part in my app is that usually Stream.record() seems to be used for injecting live custom metadata or for recording live broadcasts from FME both of which probably aren't going to switch stream sources so quickly so maybe this is a bug?
thanks for reading this,
Andy Freeman
Correspondent Corp

Hi, there may be a component test for the keyboard in the F2 UEFI Diagnostics that you could try, I pasted the instructions from the manual below: To start HP PC Hardware Diagnostics UEFI: Turn on or restart the computer, quickly press esc, and then press F2

Nokia 3500 classic Camera Standby issue

While opening the camera its showing as camera standby, so how i can solve this issue?

i have the EXACT same problem!!!! i dont know what to do to fix it. i love it otherwise and i dont want to change it cuz i love the keypad and the sleek design and all but the camera quality is even worse than my older vga nokia phone! i want to know if it can be fixed and how. i like this phone and i dont want to change it :s

Nokia C-3 faulty camera + video issues

i bought this phone 3 days back... the image quality is very bad ..too dark n grains (noise)..i suspect dat d camera is faulty.....also the phone hangs up on playin video's ...what should i do ?? is replacement possible ??
plz help ...

ozair231 wrote:
i bought this phone 3 days back... the image quality is very bad ..too dark n grains (noise)..i suspect dat d camera is faulty.....also the phone hangs up on playin video's ...what should i do ?? is replacement possible ??
plz help ...
About the video playing issue: Upgrade to FW 04.60 and the issue should be fixed.
About the camera: You can't do anything about it, it's not just your camera a faulty one. It's all about the old, cheap camera module used, that takes you back to the dawn of cellphone cameras. All C3-00s make awful, grainy pictures and you can't do s**t about it..
"Running Windows on a Core i7 is like having a brand new Porsche,
but only be able to drive backwards with the handbrake on."

Trouble connecting iPhone to remote IP Panasonic cameras- Ports issues

Cannot connect remotely to camera DVR with the iPhone due to Java Applet issues not supported by Apple. I also cannot connect to the home panasonic IP cameras because the error "Not allowed to use restricted network port" appears. In order to connect to the cameras remotely I must enter the port number after the local IP address, and is not allowing me to do that. Any expert out there? Example of a connecting address: http;// 95.242.228.177:80 (80 being the port).

Are you using a specific application to connect or trying to go through Safari?
You may need to use an app that connects to IP cameras.
You can search the app store and search "video camera" or "webcam"

Thinkpad T61 - Embedded Web Camera, Lenovo Camera Center issues

Hello, Recently purchased a T61 with the embedded web cam. The notebook comes with "Lenovo Camera Center" software (which is more like a portal for camera-related software) but there is no useful software that enables me to actually use the camera - for example, to record clips or take a snapshot with it. Nor can I figure out where to get such software. I signed up for Skype and the camera works fine in that context. But other than that, I am at a loss. Why did this T61 not come with some basic software to use the camera? Or is this an issue with Vista?
Any help or guidance would be appreciated. Thank you.

Then it should be possible. I was of the opinion that the cable already has the camera connector. Best to do is opening the bezel and taking a look. If I remember correctly it was placed left from the Thinklight.
You will need then a camera, a bracket and the small cover. You get this all in Ebay and alikes.
Take a look at the HMM for more details. Start with page 111 from the document (not from your pdf reader) => click me!
/L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
Comunidad en Español English Community Deutsche Community Русскоязычное Сообщество

Camera keyframing issue

Similar Messages

Maybe you are looking for