Camera lens problem

just noticed my z2 photos got blurry and are not clear as I first bought the phone
so I checked my lens and I found what I thought was smudge and I tried to clean using my RayBan's cotton cloth which didnt really do anything

just noticed my z2 photos got blurry and are not clear as I first bought the phone
so I checked my lens and I found what I thought was smudge and I tried to clean using my RayBan's cotton cloth which didnt really do anything

Similar Messages

  • N97 camera lens problems.

    Hello! in first, i want to sorry for my bad english.
    I have a problem: my nokia n97, make photos with dark point in left. I tkink is a dust point becose before it is on the up-right corner. You can help me take this point out? thanks!
    Solved!
    Go to Solution.

    if its dust on the internal lens you will need to go to a nokia care point to have it sorted dont attempt to clean it or open up the phone yourself or warranty will be void
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • HT201401 Camera lens and the video is not opening ive tried everythin. What do i do now? and i need it urgently!!!!

    Plzzz help with the camera lens problem not opening!!!

    I've tried everything is not very specific.
    What have you tried?
    Restart?
    Reset?
    Restore from backup?
    Restore as new?
    Recovery mode?

  • Problem with Camera lens on 16GB iPhone 3G

    So I have a Black 16GB iPhone 3G and was wondering if my iPhone is the only one with the camera lens not sitting flush against the phone. Like when i rub my finger on the lens i can feel the silver circular border being slightly raised more than the black of the phone. So i was if it is a design flaw or bad assembling and was wondering if anybody else has this same "problem"?

    It is normal, if anything being lower than the level of the phone is a good way to help eliminate fingerprints and dirt on the lens caused by your fingers and hand.

  • Camera lens coating problem

    i got a problem with my camera lens coating! it's like dots on the camera, i cant describe it!.. i never dropped the phone or did anything wrong!! what is this? can i fix it?? !

    Contact your local Xperia Care ASAP http://support.sonymobile.com/global-en/contactUs/
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • I have an iphone 4 had it for awhile but yesteday the back camera is blurry. I've had this happen before but it looked like therewas steam in the camera lens and I let that air out and it went back to normal. So whats the problem this time?

    I have an iphone 4 had it for awhile but yesteday the back camera is blurry. I've had this happen before but it looked like there was steam in the camera lens and I let that air out and it went back to normal. So whats the problem this time? My mom isn't willing to buy me another iphone because before I went to a concert and the speakers messed up half the screen. If its the software acting up can I get a free new one?

    Moisture has somehow entered your iPhone and specifically the camera. They will do an out-of-warranty replacement for $149 USD.

  • Camera lens scratches

    Is there an ongoing issue with the camera lens on iPhone 4? My husbands lens is very degraded and my phone (only 9 months old) has scratches on the lens despite taking great care of it. Is this repairable and is the issue being resolved with newer models?

    I have the same problem. My iPhone 4 takes very cloudly pictures due to so many scratches. I've heard Apple will replace the back panel for $29 (which includes the camera lens) I'm probably going to end up taking it to a Apple store and get it replaced

  • N97 Camera image problem

    Ive had the N97 for 2 months now with various problems. Todays new one comes in the form of when i tried to take a picture in low lighting. To the left of the screen when in landscape mode a transparent green half sphere appears when the camera lens focus's ready to take a picture with the flash. When i then take a picture, especially in low light, the sphere/bubble appears in the final picture when the flash is used.
    Here are some sample pics, its as if there is a spec of dust on the lens, ive cleaned the lens and the flash but still the problem persists. Anyone else having this problem? Thanks
     www.mypicx.com/08092009/N97/
     www.mypicx.com/08092009/N97_2/
    Solved!
    Go to Solution.

    @all:
    I did it!
    I painted the edge of the cover.
    Works good on my Phone!
    looks like this:
    http://www.jacknet.de/bilder/N97/Linse2.jpg
    first I took the TDK Pen:
    http://www.jacknet.de/bilder/N97/Pens.jpg
    It looks like that:
    http://www.jacknet.de/bilder/N97/Pen1_1.jpg
    http://www.jacknet.de/bilder/N97/Pen1_2.jpg
    much better, but slightly there!
    After that I took another Pen:
    http://www.jacknet.de/bilder/N97/Pen2_1.jpg
    http://www.jacknet.de/bilder/N97/Pen2_2.jpg
    Seems to be gone!!
    Maybe this effect is caused not only by the edge of the cover, but also from little scratches in front of the lens
    which reflect the light!
     http://www.jacknet.de/bilder/N97/Linse1.jpg
    when you zoom in, you can see them!
    I hope this would help you.
    If this affects the guarantee, I can't say!
    So please be careful.
    @Skywatcher:
    When you zoom in, the area with the sphere is only cutted, because software-zooming is the same like cutting a Picture after taken it.
    Message Edited by alfdererste on 10-Aug-2009 04:37 PM
    N97 ---- Fw: 12.0.026 ---- Pid: 0586701

  • Camera lens now working

    BINGO - HAVE FOUND A WAY A WAY OF FIXING CAMERA PROBLEM.
    It is not a hardware issue, but a software issue.
    Somewhere the camera the settings, have been messed up.
    By re-setting from a back up, it only puts back the restored files etc, including the duff camera settings. Only by zeroing the iPhone will this work.
    Hiya all, I recently sold my old iPhone 3G to a friend of mine, but I had the problem with the camera lens not opening, the camera application would still work, and sense the orientation of the phone. But it would let me take photos etc.
    Before I passed the iPhone to my mate. I ZEROED the phone, by going into Settings/General/Reset, then select ERASE ALL CONTENT AND SETTINGS.
    Make sure you have you iPhone plugged into your computer or mains adapter etc, because this could take up to 2 hours.
    This resets all settings to their defaults and erases all your information and media:
    And also brings the iPhone back to the state, of when you first purchased the iPhone.
    I've only just spoke to my friend who has taken the iPhone from me, and reassures me the camera is now working.

    Sounds like a hardware failure to me. I'm sure you've checked the obvious, like something covering the lens.

  • HT201401 Camera lens on iPhone 4 does not open and nothing is visible, although the camera functions normally via MMS only.

    The virtual camera lens on my iPhone 4 stays closed when accessing the camera via the camera application. If I use the camera via the MMS messaging feature the camera will operate properly and save any picture to the camera roll.
    So, there does not seem to be a hardware problem. The camera works fine except when I use the camera application itself.
    I've reset the phone and performed a restore via iTunes, the camera will usually operate normally for a short period and then revert to a state where the camera lens will not open unless accessed by a third party app or via the MMS application.
    I deleted any third party applications from the phone just in case there was a conflict, this did not help, the lens remains closed unless accessed by the messaging application or any other third party application.
    Any suggestions would be very much appreciated as this is a very frustrating problem.

    Since Reset is not helping, Restore iPhone with iTunes on computer. If this does not fix problem, consider replacing camera or entire iPhone.

  • Some unknown stuff appears in my camera lens

    Hi guys,
    I have a problem with my camera lens. My camera lens seems to have something inside as whenever i used my camera, there's a purplish ray followed with a shadow appeared at the top right corner. It had been there since the first day I bought my Iphone 5.
    It's there any way to "clean" it? Is it entitled for a warranty claim?
    Thanks and regards,
    Alvin

    Bring your phone into Apple for evaluation and find out.

  • HT1462 The green light next to my camera lens comes on but the picture is black, how do I get it to come on?

    The green light next to my camera lens comes on but the picture is black, how do I get it to come on?

    •  If you have not already done so, restart Mac and
        try again.  If the iSight still does not work, continue.
    • If Apple's http://support.apple.com/kb/HT2090
       suggestions do not help you, (are you certain that you
       used the correct "reset" procedure?), yours is most likely a
       hardware problem that will require a professional fix. 
       Unless you have a current backup, make one now.
      Then use the final "Troubleshooting" suggestion:
    "... contact Apple or an Apple-Authorized Service Provider for service."
    • If you want to try one more thing on your own first,
      use Disk Utility to repair permissions.  Then
      download and apply the latest Combo Update for
      your OS.  Currently, the latest SL Combo is here:
        http://support.apple.com/kb/DL1399
    • Repair permissions again immediately following the system restart
       that completes the Combo update.
    Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of iSight. 
    Message was edited by: EZ Jim

  • Cs6 camera lens blur not using curve ajustment on blur map

    So I am doing some camera lens blur to create the 'tiny town' effect. I have completed following this tutorial: http://www.youtube.com/watch?v=oleQ9O3kaPk
    But the camera lens blur doesn't seem to be taking into account any curve ajustments I make.
    It is creating the blur effect as if the curve is not activated (even though it is and I can visibly see my ajustments to the gradient on the shape layer).
    Anyone know what the problem is?

    It works as it should. Effects referencing otehr layers use the layer source, not the effects result. You need to pre-compose the adjusted depth map.
    Mylenium

  • Nokia n95 8gb moisture in camera lens - HELP

    Hi, I have Nokia n95 8gb and while have been in a shower I have left it in the bathroom and now my lenses are moistured/water from inside of camera/lens. How can I fix/dry this?
    PLEASEEE HELP ME.

    Many people take the phone into the bathroom whilst taking a bath or shower not realising this actually harms your phone!
    Steam has entered the phone and turned to condensation and this is never good for an electrical product.
    This will probably cause you many problems sooner or later, but for now remove the battery as having the battery in the phone whilst it is still wet is damaging your phone with current from the battery surging through all those components joint together inside with water.
    Then put the phone in a warm dry place, where you have your boiler for your home as an example, and leave it there for a few days.
    This should dry out any liquid there is inside the phone but only time will tell of the amount of damage has occured.
    My posts are my opinion and in no way the direct views of Nokia.
    If my posts are helpful, please give me some KUDOS using the green star on the left.

  • Missing LR camera/lens profiles

    I updated to the latest version of Lightroom this afternoon. When I continued with LR, I discovered all my camera/lens profiles were gone. Can anyone tell me what  happened and how I can recover or replace then? Thanks!

    ssprengel,
    Thanks. I've been traveling for two weeks and have not had access so I haven't followed up on your questions.
    Yes, I updated from LR 5.5 to 5.6 and discovered my profiles were gone after that. I did do some other "clean up" on the computer working with the Apple folks to solve another set of issues. It is possible that this is the source of my problem.  Your suggestion is to uninstall and reinstall LR. What precautionary steps do I need to do prior to the uninstall? Any special instructions for the reinstall. I would hate top end up with no LR at all!
    Thanks.

Maybe you are looking for

  • WIll my MP drive a dell U2711

    I ordered a Dell U2711 as I'm tired of waiting for Apple's new monitor offerings and I never checked if my MP will drive it ok. It has the ATI 4890 HD and the Dell the following inputs : VGA, DVI, Composite, Component, HDMI, DisplayPort. I believe th

  • Round in obiee

    Hi, how to round the 0.80 ,1.11 ,1.70 values in obiee thanks

  • Client with Patch fails to install - Build and Capture

    Hi, We recently hit an issue where our Build and Capture task sequence, previously fully working, was deleted. As such I've had to rebuild it from documentation. So far so good. However when I now test it out, the sequence fails during the installati

  • Jdev 10.1.2 UIX table double rows

    After migrating to JDev 10.1.2 I met such problem! When I add row to editable UIX table and then try to select another row the row I just added makes double! Does anybody meet such problem?

  • Expression with qualified table fields

    Hi all! I have 2 doubts concerning the free-form search and expressions using qualified table. We're implementing SRM-MDM Catalog. Here is the scenario The search is done in the Main Table (Products). The qualified table (Contract) has the following