Camera light of my Satellite C850D-115 is very dark

The Camera light of my notebook Satellite C850D-115 is very dark and can hardly be seen. So I dont know, if my camera is activated by a trojan.
Is there a way to increase the brightniss of the camera light?

To be honest I don't know how it looks like and if there is real problem but you can find brightness level option in cam settings.
Check it out.

Similar Messages

Satellite C850D-115 / Win7 - the special funktion key mode ist not working

Hi,
the special funktion key mode ist not working, although I tried everything in Bios and softare " Toshiba Hardware setup utility".
I still need to press "FN + " to use the special function keys, while enabled bios mode!
The special function mode was never working, I have no more ideas. You...?

As far as I know its no matter what system you are using. The special function key mode should work with Win 7 and Win 8.
Here an Toshiba documentation.
[How to change the Function Keys Mode|http://aps2.toshiba-tro.de/kb0/HTD2503B90001R01.htm]
You bought this notebook without an preinstalled system. Right?
And you installed an clean Win 7 on this Satellite C850D-115?
Please ensure that all available drivers for C850D PSC9UE are installed. This includes the VAP (value added package), Hardware Setup, and others
There is also new BIOS update v6.50-WIN
Be sure your BIOS is up to date!

Switching my Satellite C850D ON

Even simply turning a laptop ON is a problem for me, to say, I know nothing about computers.
In the manual for my Satellite C850D it says press the ON button 2-3 seconds. I do time this by counting the exact number of seconds. Still, sometimes the laptop turns on, other times the on light turns off and the screen goes black, laptop is off. Or the start screen comes on, then the screen goes black and laptop is turned off again.
This means on some days I have to press the ON button several times,each time counting the requisite number of seconds, before the laptop turns on. Is this not bad for the hard drive?
More importantly, is this normal, the ON button being so very sensitive? Is there anything that can be done to change this, so I can just press the button and the laptop turns on, every time, and not just sometimes?

Sorry mate but this is definitely not normal notebook behaviour.
To power ON the notebook I never had to count the seconds
Just simply press the button (touch it gently until the power LED would be ON) and release it.
I dont know if your notebook is set to hybrid shutdown but you should check the following document:
[Perform a complete shutdown in Windows 8|http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm]
In case the fast startup is enabled, the hybrid shutdown will be performed.
I would recommend you to disable this option (Remove the checkmark at Turn on fast startup)
Apply the changes and power OFF the unit as mentioned at the end of the document (select Power and click on Shut down)
I think this changes the power button behaviour.

System Restore problem on Satellite C660-115

Hello everyone,
The Satellite C660-115 my niece has a problem and I would like to make it serviceable for his Christmas.
Turning on the computer's voltage giving as final result the message: * Can not find the operating system will ", so I tried System Restore by first pressing the 0 key, and after many tests, changing the order of the boot and the other (with F2 or F12) ... But there was nothing.
From there, I realized that I could not go further without original recovery DVD from Toshiba. So I ordered last Saturday and got today Thursday. After as indicated by Toshiba (boot sequence beginning on CD drive), the system begins to upload (Windows is loading files ...) and then propose, on a nice table, the available languages, and choose .. .dropoff window
If, until then, everything seemed to unfold as it should, that's that clicking the "next" button to validate my choice of language an error message appears in a dialog box named RecoGUI:
ERROR:. IOCTL_GET_DISK_LENGTH _INFO \\ \ PHYSICALDRIVE0 The device is not ready.
When I press OK, then it is in French:
The hard disk # 0 is not available or incorrect RAID configuration!
I still presses OK (I do not have much choice) and then present the following window restoration that requires me to validate the language of the operating system to install ... French (Windows Win 7)
and states: The current size of restoration is to: Expert Mode
Again, I click OK and a warning box warns me that: All hard drives will be completely erased. Would you like to continue?
OK ... and cmd prompt appears that says (in short)
Checking for Drive V: V Drive not mounted ...
Ckecking for Drive C: ... C: unmounted!
ending with: ERROR Copying of Recovery Base files failed!
Press any key to continue (if I do, I find the Toshiba screen, and another cmd prompt that says so;
Waiting for ODD To Become available ...
ODD Drive D: ready.
Check for medium in Drive D; ...
Continue ...
Drvload: Successfully loaded X: \ Windows \ inf \ battery.inf.
No RAID - Normally continues ...
Installation in progress ...
Press any key to continue ... which, if I do, then placed below:
X: \ Windows \ system32>
That's where I stayed, because I always come back to the same.
Could someone be kind enough to help me solve this problem?
A big thank you in advance ...
+Message was edited & translated+

From my point of few we should consider two possible issues.
1) faulty image on the new recovery disk
2) problem with HDD as well as the partitions
In my opinion you should check the HDD firstly.
You can run some tests, for example you could try to install the Windows system using a clean Microsoft Windows CD (image)
Windows 7 Home Premium 64bit image can be downloaded here:
http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65733/X15-65733.iso
But of course, you will not be able to activate this system without a valid serial key
So you can use this image just for testing purposes.
In case the image installation would run flawlessly, your recovery installation problem might be related to the faulty recovery media.
In such case you should try to contact the recovery media provider in order to get another, new good working media.

Satellite U200-115 - CD Rom error - can't activate the drive from windows

Hi everyone,
I'm having some problems with my DVD rewriter drive on my Satellite U200-115.
It works very intermittently and whenever I power up the machine, the first notice I get is 'cd-rom error' even though there is no disc in the drive.
I can't activate the drive from windows either (icon in system tray).
There is the odd occassion when the drive does work in windows but this is so infrequent that I can't remember the last time (I think it was back in Nov 08).
I want to restore the system as I am getting a lot of windows file icons instead of the proper icons for images e.g. pdf, doc, etc. but am worried that the drive wont read the disc or will stop working during the recovery process.
Any ideas would be gratefully received.
Best WIshes
Nick

If its a software issue the drive will not stop working during the recovery procedure.
Do you get a CD-ROM error in Windows?
You could try to boot from a Linux boot disk. If this work it would be a software problem and not a hardware problem.
Maybe this article from the Microsoft Knowledge Base can help you:
http://support.microsoft.com/kb/314060

Re: Satellite C660-115 Very strange Wifi problems!

I've been busy solving a wireless problem on a C660-115, still without success.
Satellite C660-115
Windows 7 - 64Bits
The case:
- Laptop is connected to the power supply: Wifi works fine, no problems
- Laptop disconnected from power supply: Wifi won't work, although there sometimes seems to be a connection with the access point/wifi router.
No internet/network communication
- Laptop connected to the power supply --> wifi works, unplugging the power supply --> after a 1/2 minute or so, no internet connection...
I tried to find a new driver, but we already use the latest version.
Then i switched off the "This computer may switch of this device to save energy" function, without succes.
Ideas anyone?

I had same problem with C660 running windows 7 losing internet access but not network connection whilst using battery power, but no problems when connected to mains power.
Solution; Change power plan to high performance. I found this sovlved the problem instantly.

I dropped my iPhone 4S in the toilet. Now it won't shut off and the camera light stays on. What should I do?

I dropped my iPhone 4S in the toilet. I dried it and shook out as much water as I could. I removed the SD card and put everything in a bowl of rice. It is still in there and everything appears to be working normally, but it won't shut off and the camera light stays on. I've tried the restart thing where you press and hold the pwr button and the home button. What should I do?

Service and Repair - https://selfsolve.apple.com/ Repair options (require hardware serial number)
http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=iph one <-- enter correct country once on page

Unable to load Windows 7 on Satellite C850D

I purchased this Satellite C850D in May this year and it had Win 8 pre-loaded. My son did not like it so I decided eventually to remove it and load Win 7. I took the hard drive out and formatted and repartioned the hard drive but when I have returned it and attempted to load Win 7 I get problems.
Initially i could not get anything to work then v=changed the BIOS settings from UEFI to allow booting but now I continually get
pxe-e61 error media test failure, check cable
pxe-m0f exiting pxe rom
reboot and select proper boot device
I have removed the network capability with no luck as the hard drive is located in the BIOS settings and have attempted changing the boot order
I have attempted to boot from USB, from CD/DVD and also loading direct to hard drive but nothing...and now told no operating system.
Is there a workaround?
Please help as i am getting to the point of throwing the laptop against the wall haha

At the beginning I must say that I really hope you have created recovery media for original Win8 that you can use if you want to have factory settings again.
Anyway, I don't understand what happen there but before we start to discuss about this issue check please follow documents
http://aps2.toshiba-tro.de/kb0/TSB2B03EX0002R01.htm
http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm
Have you done everything that was described on these documents?

Satellite C850D-11C PSCC2E - CHIPSET driver for Win 7 64bit needed

Hi,
I've been stuck in a long convo over at the techsupportforum and was finally told to try here.
So, I own a Satellite C850D-11C PSCC2E with Windows 7 x64.
I can't seem to find the chipset driver for my laptop in the list of drivers.
I first tried to install all available drivers, but it's obvious without a chipset I will have problems, and I do.
The USB ports don't work like they should etc.
Where is the chipset driver for the C850D-11C PSCC2E?
Thanks!

Hi
Your notebook is equipped with an Ati (AMD) graphic chip.
This means that the chipset must be from AMD too.
According to some information which i found in internet, the AMD A68M Chipset should be built in the notebook.
Furthermore as far as I know the ATI chipset driver is part of the ATI/AMD graphic card driver and therefore you should install the GPU driver to get the chipset driver installed

Camera light on for no reason plus Virus?

2 Questions this time. First, I've been having a lot of difficulty getting my battery to charge and stay charged. Finally I got it charging this evening, but when the computer turned on, the green camera light is also on. There are absolutely NO applications running except safari, so it's not on because of any applications using it. Does anyone know what to do about it, or if it will drain the battery?
Second, I was transferring some files onto my friend's PC from a pen drive, which we found out has the winfixer virus. I looked it up and it seems it is not a virus which affects macs, which makes sense why it never even showed up on my computer. I was wondering though how I could have possibly gotten this virus and how to get rid of it?

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
- Peter

HP6310 won't respond to power button, camera light flashes

After turning my HP6310 off by unlugging the power cord, I can't get it to turn back on properly. I plugged the power cord back in and the display lights up blank and the camera light in the front lower left flashes. The power button does not light up and when pressed, does nothing.

Hi @mcdillon99,
Welcome to the HP Forums!
I noticed that your HP officejet 6310 will not respond to the power button, and the camera light flashes. I am sorry to hear this, but happy to help!
I would recommend to go through this guide, The HP Printer Won't Turn On or Respond When the Power Button is Pressed. (Even though the guide title may not match your issue, I believe the solutions will help).
Hope this resolves your issue!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Camera light problem

Camera light on stock app on Lumia 720 does not work, it didn't before and after 8.1 update. But on nokia camera app it does work fine, i think it is a bug. I just could use nokia camera but i like stock camera app more its just faster on this mid range device. Also i hoped that recent 8.1 update will fix the bug, it changed the app a little but camera light still fails to work

For a minor bug like this hard reset seams unnesesary, also i checked my friends phone, same thing but it is not lumia 720 but 925. Mabie this bug gets unnotised since you dont usualy try to film at night in complete darknes a lot

Macbook air camera light flashing on resume?

Hi guys, my Macbook air (11 inch, mid 2011) has recently had its facetime camera light flashing on resume when I open the macbook lid. The time period when it flashed varies, but I am worried about security, and if someone has access to the camera.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d; /:$/{s/ *:$//;x;s/\n//p;}; /^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/$.*: $$.*$/ $\2$/;H;}; /Apple|SCSM/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* || continue; ls | while read f; do [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed 's:/Users/[^/]*/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

How do you turn the camera light off

Cannot get the camera light to turn off

That's strange behavior for your iPhone, ddavis1727. Do you have a flashlight application installed on your phone? Have you tried turning your phone off and back on? What software version (Settings > General > About > Version) do you have on your phone?
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

My iphone got wet in the rain. the camera light is now permanently on - any clues

my iphone got wet in the rain and does not appear to be working - the camera light is permanently on...

Does the camera work correctly? I have seen this before on iPhone 4, so may not apply to 4S. But if camera does not work, then simple camera replacement could be the next step to fixing this problem of both camera and flash (they are combined part).

Camera light of my Satellite C850D-115 is very dark

Similar Messages

Maybe you are looking for