Camera mic not working

Hi,
I have an issue with my 920:
None of the videos I recorded have audio. Also, during a Skype voice call the mic works ok. But as soon as I switch on the camera, the other party cannot hear me anymore. After switching it off, they can hear me again.
Already did a hard reset. Did not help. Hardware issue ... ? Don't hope so

hi mate,
if you have already performed a hard reset, it sounds like you will need to take your phone to Nokia Care for inspection: http://nokia.com/support

Similar Messages

  • IPad 2 3G 64 mic not working from factory, do you have any idea ?

    Hi
    I have iPad 2 3G 64 , it  works prefect but when I use cam for record video there is problem in mic . Mic not working so no sound in video .
    I try to use any app from apple store to test mic but still not work also I try to update the device to 4.3.3 when I finish from update again same problem with mic, I used this iPad for one month
    I think this problem from hardware not from software .
    Please tell me what i have to do with this problem .  

    Hi
    I have iPad 2 3G 64 , it  works prefect but when I use cam for record video there is problem in mic . Mic not working so no sound in video .
    I try to use any app from apple store to test mic but still not work also I try to update the device to 4.3.3 when I finish from update again same problem with mic, I used this iPad for one month
    I think this problem from hardware not from software .
    Please tell me what i have to do with this problem .  

  • Ipod mic not working

    My Ipod 5th Gen mic not working

    - Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
      - Open the Voice Memos app and see if you see movement on the VU meter needle with changes in noise level trying to be recorded
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • IPhone 2G voice mic not working

    Has anyone come across iPhone 2G voice mic not working (not being heard by the other person) but works fine on speaker phone and bluetooth headset. It has been working fine so far and suddenly developed this problem! Any help is highly appreciated….

    I had that problem with my iPhone 3G after about 5 days.
    I just had Apple take a look at it.
    They cleaned it out, called it and stuff.
    Didn't work.
    Since I didn't drop it in water and it was not my fault in any way, they gave me a brand new one.

  • Iphone 4 camera flash not working.

    Iphone 4 camera flash not working when taking pictures but works with the flashlight app. I have ios 7. Tried factory reset. My wife has the same problem with her iphone 4 since the first month she has had it. Any suggestions?

    and what have you done to try and fix the situation?  Have you taken the steps recommended in the User Guide?

  • My camera does not work on my ipod touch 4th gen. it just goes to a black screen i have done everything from resetting and rebooting... help :(

    I fell down the stairs the other day and busted my other ipod to the gamewerks near my house. the guy said he couldnt fix that ipod so he gave me a new one.. a better one a 32GB, the broken one was 8GB. but he told me the only bad thing is that the camera does not work and he doesnt know why... he just couldnt get it to workkk... any ideas on whats wrong?

    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

  • My camera does not work on my macbook, any suggestions to fix it?

    my camera does not work on my macbook, any suggestions to fix it?

    Here are Applle's troubleshooting steps....
    support.apple.com/kb/HT2090

  • I just bought an Iphone4 from straight talk and my camera does not work. The shutter wont open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile and now that I have it, it does not work properly. Need help

    I just bought an Iphone 4 from straight talk. My camera does not work. The shutter does not open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile. I want the issue fixed.
                                                                                                                                                     Thanks

    Take the iPhone to an Apple store genius bar for testing, and if it is defective and under warranty they will replace.  Since you say iPhone 4, was this a used or refurbished iPhone? 

  • I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, what should i do?

    I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, I honestly think this is out raging because i spend over $200 on this. To have for music and instagram. I use it about an hour a day, but i've only been using it for about 3 months although i've had it since December. Any suggestions that may help me?

    Try:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod
    If still problem make an appointment at the Genius Bar of an Apple store.

  • Help, web cam is not working properly with win vista

    Hii.. my web cam is not working properly with win vista..even if the icon appears bt it does nt start.. its
    lenovo easy capture 2.5...so if u cud suggest me anything...
    Moderator note; subject edited

    re-install drivers and try again. ( also easy capture )

  • My integrated web cam is not working

    I Am using hp pavilion p001tx laptop. My web cam is not working
    It shows a warning
    No web cam detected. Try to plugging in a webcam into your computer now. If you are using an integrated camera, Make sure that it is turned on.
    Help me please.
    My laptop serial number is [Personal Information Removed]

    Check if the drivers are installed or not.
    Try to update the camera drivers and restart the system.
    You can also go to device manager setting and see if the webcam is disabled or not.
    If everything fails try system resore or run OS recovery.

  • HP Compaq web cam is not working

    I have Hp Compaq  Notebook 620. The devices have 2MP Web Cam but the Web Cam is not working. When i try to make it on, its shows error
    "No webcam detected. HP Webcam will now Close"
     Please suggest the solution of the problem.

    Hello Manishshakya,
    I see that you are having problems with the webcam on your computer. The unit you have is a HP commercial unit.
    I would suggest posting your problem in the HP Commercial Forum as well. There are more users with the computer you have on this board and it is specific to your computer.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • My HP-Pavilion dv6 web cam is not working properly, fluctuating always

    My HP-Pavilion dv6 web cam is not working properly, it is fluctuating always

    re-install drivers and try again. ( also easy capture )

  • Web-Cam does not work on Lenovo G480, PLEAS HELP!!

    Hello,
    I have a Lenovo G480 (20165), and my built-in Web-Cam is not working.
    When I enable it by pressing Fn+Esc the little light by the Web-Cam turns on, then shuts off after a second.
    So I downloaded the Lenovo Easy Capture, and when I open the software, I get a message saying "Failed To Open Camera".
    And when I turn on my laptop, the little light comes on for a short moment, then the light shuts off.
    I don't know what to do, It's a brand-new laptop and I've never been able to get the Web-Cam to work, not even on Skype.
    I would REALLY appreciate the help. Thank you!

    Have you installed camera drivers from the us support site? Try reinstalling them
    Win 7
    http://download.lenovo.com/consumer/mobiles/0qca12ww.exe
    http://download.lenovo.com/consumer/mobiles/0lca12ww.exe
    Win 8
    http://download.lenovo.com/consumer/mobiles/0qca08w8.exe
    http://download.lenovo.com/consumer/mobiles/0lca11w8.exe
    Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
    If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

  • My tx is so slow, the web cam is not working, the screen freezes and got color distortions

    - My tx is so slow, and heats up very fast... so i think that the advance is not working properly
    - the web cam is not working, since the 3th time iused... when i try to use it with my msn... got freezed, then y try ending the process and doesnt work, y     have to restart it but it stay just on logging off... and do nothing more... so i have to switch off directly from the power button
    - The screen freezes... some thimes the screen got freezed... and got color distortions too... so i have to to switch off again directly from the power button
    i was thinking that it was a software problem... but i restore my lap and it doesnt work cuz it still being with the same problems... so lately im thinking that its a hardware problem... i call to technical support from mexico... but they can do nothing for me cuz i bought my lap at circuitcity from el paso... and that store close a few months ago... so i need help before de warrantie expires...
    This is the second time that my lap gives me problems, last time I made the change at the store but this time it will be impossible cuz is now closed...
    that is why I seek your help...
    i will be grateful if you answer in Spanish because my English is not very good...
    thankyou so much...

    If your warranty has not yet run out get it serviced, now!  All of the comments seem to indicate that it is the motherboard>

Maybe you are looking for

  • Having multiple nodes with the same name in JTree!!!???

    Hi! I want to be able to have folders or files with the same name in different locations in my JTree. But if I do so the last one always overwrites the previous one. I have a vector with strings like root\aaa\bbb\ccc\ddd.doc, root\aaa\bbb\eee.doc, ro

  • Downloading Exit Code: 15

    When trying to install In Design, I get the following error message: Exit Code: 15 Please see specific errors below for troubleshooting. For example,  ERROR: DW051 ... -------------------------------------- Summary -----------------------------------

  • ERROR: XIAFUSER user is not configured for keystore.....

    Hi all, When I am running the an adpater on XI that uses digital signatures that I have loaded into the TrustedCA's keystore view I get this error in my monitor. ERROR: XIAFUSER user is not configured for keystore TrustedCA's. How do I configure a us

  • JasperServer Portlet on Webcenter

    Has anyone attempted embedding the JasperServer portlet into Spaces? I managed to get the portlet deployed to Weblogic and register it as a WSRP Producer but it doesn't render on Spaces. I get errors relating to Spring framework (Jasper uses the spri

  • What is the best cpu for Premiere Pro and autocad?

    I am considering these three cpu's. My build has to run Premiere Pro CS6 and the latest Autocad (I know this a Adobe forum, but if any out there also run Autocad in addition to PP...let me hear from you and what your build is). I am PP hobby enthusia