Camera not saving the phots

after updating i phone(4.3.5) camera not saving the photos

Ok .... try this:
Take a pic them open it. See if you can rename it. If you can, give it a name then save it with that name and close the camera app. Now do a search for that name and see if you can find it.
Also try to change the camera settings to store the pic on the device.

Similar Messages

BDC not saving the Document

Dear Friends,
I have written the BDC for FB01. It's uploading all the voucher entries properly but after the last entry it's not saving the document and asking for new entry..
What may I be missing? Any clues???
Regards,
Alok.

Hi ,
Use simulate button, to check and make sure the amount on both sides(DR/CR) are equal. If the problem is not solved then check for your BDC recording, is having any Popup's screens to fill the mandotary fields like cost center like that.
Thanks,
Bala.

My Mozilla 10.0.1 Is not saving the history of more that two days

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/918527]]</blockquote>
My Mozilla 10.0.1 Is not saving the history of more that two days

Make sure that you do not use "Clear history when Firefox closes" to clear the <i>Browsing History</i>.
*Tools > Options > Privacy: History: [X] Clear history when Firefox closes > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
If you use cleanup software like CCleaner then check the settings for the Firefox application.

Not saving the data in two tables

Hello,
its my production problem, i have an update form where you can update the records and these
records will sit in the temp tables until the final approval from the supervisor.
In this update form i have two table where i am saving the data one is dup_emp to save the
officer data and another is the dup_address to save the officer where he worked data.
in this form address form is pop up screen where you can update and gets back to the original
form where you can see all the other fields. my problem is if a user hit the cancel button on
address form example the user doesnt want to update any information on that screen so user
cancel that screen, and comes to the other screen where the user makes the changes to the
appropriate fields and hits the SAVE button. in this case its saving only to the dup_emp table
data not the address data from the address form to dup_address table for the same record.
if the user cancels in both the screens cancel button it should delete the record from both the
tables but cancel in form and saves in another form it should save the record in both the
tables.
here is my code from both cancel buttons from both the forms.
this is code is from address form cancel button.
delete from dup_address
where address_id=:address_id
and parent_table_name='emp';
commit;
CLEAR_BLOCK;
go_block('DUP_EMP');
This code is from dup form of the cancel button
declare
temp_address_id varchar2 (12);
begin
delete from dup_emp
where secondemp_id =:dup_emp.secondemp_id;
delete from dup_address
where parent_t_id=:global.secondemp
and parent_table_name='emp';
commit;
clear_block;
go_block('secondaryemp');
END;

Hi,
As Aravind mentioned, it's nothing related to workflow. You have to find a BADI in tcode PA30 that could be used after the infotype is updated. So, you can use FM SAVE_TEXT.
Regards,

OC4J Report Server is not saving the PDF out put

Hi everybody,
I have a master report running under OC4J.Under this master report 1000's of other reports are runninng by using the srw.run_report.Report name and other required parameters are taking from the database.My aim is to send all generated PDF reports by using the javamail.My problem is report server is not saving any reports until the completion of the master report.Once the master report is completted we can see all the reports under the specified folder, before that we can not see the out put in the folder .So the above reason my mailing part is getting faild because of system cannot find the specified file in that particular path
Hi anybody know how to save each pdf report in a folder insted of waiting the completion of entire report
Is any particular report configuration is required for that?
srw.runreport is running in the batch mode
thanks in advanceee
regards
mathew
Message was edited by:
Mathew Thomas

Please helppp meee

Not saved the changes to the information for the movie.

Hi guys!
Suddenly faced with a problem: the changes are not saved in the statement made by me about the movie. I make the changes themselves, close the properties, open again and see that all the changes I've made have disappeared.
This occurs only on MAC OS X Mavericks.
If close iTunes on this computer, and open at the other with MAC OS X Mountaine Lion and try to edit the infornation movie - after closing and re-opening information about the movie is saved. Tried different movies, the result of similar: on iTunes MAC OS X Mavericks are not stored on MAC OS X Mountaine Lion - everything is fine.
Show you how to cure this problem?
My iTunes library is on a network hard drive WD My Book Live.
Add movies / music etc. turns on both machines. When trying to make changes in information about the movies to the library is connected to only one computer.
All available updates for both computers are set.
I reinstalled iTunes, ran a disk check on the computer.
Films are not purchased in the AppStore, but me personally encoded in a format m4v.
Folders and files in your iTunes library have the following rights:
Daapd - read / write
staff - read / write
everyone - read / write
Pls, need help. Thk Y!

No one is faced with similar? I am glad that I only have these problems

RoboHelp for Word 7 is not saving the rtf and won't compile .hlp

I use RoboHelp for Word 7 to produce WinHelp files. It's been working fine for several months on this computer.
Just in the past week, I had an issue with my Word 2007 when trying to open a .doc file. I got the message that the converter nswrd632.wpc wasn't found. After searching on the Microsoft forums, I edited the registry and registered that converter.
But now (and this may be unconnected to the Word converter message) RH won't save the .docx or .rtf file. Whenever I click Save All, nothing happens. When I click Exit Project, the message comes up about needing to save the files, and I click Yes to All. Nothing happens except the message closing. No files are saved and RH does not exit. The only way I can exit RH is to click No, which of course means my changes aren't saved. I can't save the .docx file through the Word menu, either.
I also cannot compile the file. Again, no error message, just doesn't compile.
I have searched the forums for RH for Word, with the result that I've reinstalled RH, made sure the RH add-ins are enabled, and deleted all the .dot files. Nothing is working. I went to Peter Grainge's Snippet 112 and followed the directions there--no change.
I have found that after making my edits in the Word document, if I manually save the RTF file by going to the Word Save As directory, the edits will be saved and RH will compile the .hlp file - one time.
Any ideas?

Hi, I have a nearly identical problem, except my project uses .doc files instead of .rtf files. I was able to solve the "cannot save" problem by following the information below. I still have not resolved the "cannot compile" problem.
I'm using Windows XP, RH7 Build 100, Office 2007. My project was created using Office 2003 and I did not experience any of these issues until I recently upgraded to Office 2007.
This fix was sent to me by my group's "tech" guy.
A number of Adobe RoboHelp for Word 7 users have reported that they cannot save changes or generate an output. The cause has been isolated to the RHComAdd.DLL being disabled.
Check for that in Word:
For versions up to 2003 go to Help | About | Disabled Items. If RHComAdd.DLL appears, re-enable it.
For Word 2007, go to the Office Button | Word Options | Add-ins. Under "Manage" select Disabled Items and click Go. If RHComAdd.DLL appears, highlight it and re-enable it. (THIS IS WHAT I DID)
Alternatively, you can re-register the DLL. Go to Start | Run and type in the following line, assuming you have installed RoboHelp to the default location.
regsvr32 "C:\Program Files\Adobe\Adobe RoboHelp 7\RoboHELP\RHComAdd.dll"
How does this DLL get disabled? The cause has been identified as a Word document being opened in Internet Explorer rather than in Word.
This problem was fixed in Build 7.0.2.
Hope this helps you. I'm still working on the compile error.
-Shannon Mooney

Camera not saving photos correctly

I can take photos with my camera but in the corner where the photo taken shows up, it shows loading bars like it's trying to do something with the photo. When I click there or try to open the photos taken on any of the apps to open photos, it starts loading indefinitely with a black background. Those photos also don't open in the computer. It's like the camera is having difficulties saving the photos correctly.I've tried restaring the phone, stopping and clearing the data for the Camera app, but nothing seems to have worked so far. Do you have any ideas of what to do?

Try performing a system repair using PC Companion as this will often fix issues - This will factory reset your phone and erase all data so best to backup before you begin
Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP

PSE7 is not saving the edits I make to my pictures

I'm working in the Editor and I am saving the edits I make as a jpeg file. I then go back to Organizer and my edits were not saved.
Any ideas why this might be happening?

Usually, File->Catalog->Repair and Optimize will fix the problem for future edits

When i am trying to download something it is diaplaying downloads window but not saving the file in that why?

i tried cache clearing and application tools settings and all.
it is asking for want to save ur binary file eventhough i press save button also it is not saving anywhere please resove my problem as soon as possible. And i tried pop3 blockers settings also but of no use.

See:
* http://kb.mozillazine.org/Unable_to_save_or_download_files

AI CS3 Plugin: When I close the Illustrator application, it's not saving the unsaved file.

Hi Everybody,
Version: AI CS3
OS: Windows XP
I've an AI plug-in which defines its own file format, with .ai extension itself. In the VC++ code of the plugin, I spawn .jsx file to do the validation (if it's out of the artboard, illegal font and so on). Using the plug-in, every other functionality is working fine except for one thing, i.e., while closing the application. When I try to close the application, it gives a prompt asking if you want to save the unsaved .ai file( Yes, No and Cancel Prompt). If I click on Yes, it should actually save the file and then exit. Here, since validation is done using a different file (.jsx file), it calls that file only after exiting the vc++ code. While closing the application, the file is getting called in vc++ code, but it happens only after exiting vc++ code, so there is no process to handle that file since I'm closing the Illustrator itself. It exits by throwing an exception- unable to read the particular location. Would anyone please tell me how to deal with this?

Hi Sharon
Hmmm, where exactly *IS* the focus in your tests after
closing the RoboHelp generated .CHM file? I just tested and saw the
same behavior regardless of whether it was a Microsoft .CHM or a
RoboHelp HTML created .CHM. Each time, the focus was returned to
Windows Explorer.
I do know that the manner in which your developers open a
.CHM can vary. For example, your developer can specify that a
particular tab have focus, such as the Index or TOC, while simply
double-clicking will result in the last opened tab being the active
tab.
Wish I had more to offer here, but I'm not seeing the same
behavior as you are. I do know there are some extended settings for
your window, but I'm doubtful that's the answer here.
Also, I'm not too sure how much stock I'd put in something a
Microsoft call center stated. Just the nature of call centers. Some
folks that staff them are good and skilled, some are a bit, shall
we say, lacking. This is truly "Luck of the draw".
Sincerely... Rick

Cisco AnyConnect Secured Mobility Client not saving the VPN url after disconnecting from session/restarting client

Hello there.
I am having a problem with Cisco AnyConnect version 3.1.04072. When one of my colleagues disconnects from the VPN session, closes out the program, and then later on, reopens the client, the address that he manually entered did not save and it's defaulting on the two now-defunct VPN servers listed.
Here's an example to see if it makes more sense:
-User opens Cisco AnyConnect. By default, there are two selections available on the pulldown:
SSLVPN.abcdefg.com
access.abcdefg.ca
These two VPN servers are now defunct and we use a new VPN server:
access.abcdefg.com
The user has to manually type it in. He is now able to connect. However, when disconnected. Regardless if the program is closed or not, it does not save the new VPN server address, rather goes back to the default two VPN servers listed.
I've checked XML, HTML, registry keys, sys files, dll files to see if I can change the default servers manually. No sign of it.
I'm hoping that someone out there knows a solution to fix it.
Thanks in advance!

Hi Vergel ,
You can create Anyconnect client profile on ASA. In this profile , you can define the hostname/IP that you wish to connect , along with hostname/IP that should be displayed on the client.
In the client profile , you can define these parameters - "HostName" and "HostAddress" as "access.abcdefg.com" so that any user , who tries to connects , will see "access.abcdefg.com" as the name displayed in the anyconnect connect field.
On the client, the xml profile (C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile) [Win 7] can be seen using those parameters as follows:-
        <HostEntry>
           <HostName>access.abcdefg.com</HostName>
           <HostAddress>access.abcdefg.com</HostAddress>
       </HostEntry>
Ref:- http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect30/administration/guide/anyconnectadmin30/ac03vpn.html#89103
Additionally, you can try to delete preferences.xml file to remove the redundant hostnames from the anyconnect connect filed.
Path for preferences.xml is C:\Users\Cisco\AppData\Local\Cisco\Cisco AnyConnect Secure Mobility Client (Win 7),
Hope this helps.
Regards,
Dinesh Moudgil
P.S. Please rate helpful posts.

Snipping tool is not saving the snip

I use windows 7. I wasn't using the snipping tool but when I used it, it didn't saved my snip even when I clicked "Save as". And when I tried to close that window the dialogue box for saving the snip appeared but also after selecting "yes"
it just disappeared. Which kind of error is this? And how would I solve this?

A few suggestins:
You may try a System Restore-select any Restore Point when there was no such issue.
You can try to create another user account with administrative privileges and login to see if the same issue occurs.
You may use SFC /scannow to check the system file first:
http://support.microsoft.com/kb/929833
S.Sengupta, Windows Entertainment and Connected Home MVP

Firefox is not saving the password for my spam website.

This all started when I was browsing through my options and looked at my Saved Passwords. There were two entries for my spam e-mail website. I deleted one of them. Later, when I had to view spam, Firefox no longer remember my password. When I checked the Saved Passwords again, I went with Show Passwords, that area was blank for my spam website. So I deleted that entry also.
At this point, Firefox should have asked me if I wanted to save my password the next time I logged into my spam site, but it doesn't do that. I have added several new passwords to new sites, and Firefox saved them correctly, this website included.
Oh yeah, I'm currently using Firefox 7.0.1

The website may be using autocomplete=off to prevent Firefox from saving the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
*http://kb.mozillazine.org/User_name_and_password_not_remembered
*Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

Camera not saving or sending photos ?

The camera on my 4s will take a pic, but, will not save it or send it via Icloud.

Hi!
I have the same experience. Yesterday my camera roll contains 583 images, I thought it would be good to save them to dvd so I'll have more space in my iPhone. I downloaded the photos to my iPhoto and deleted the originals. When I went out and took photos in the mall I found out later the photos didn't saved in my iPhone even though I heard a snap sound and saw the pictures going through the folder!
What the heck is going on??? I just bought it late last year. I can't restore my iPhone I've got loads of downloaded songs and videos in it.

Camera not saving the phots

Similar Messages

Maybe you are looking for