Camera not showing on my phone

 Can't pick up my Camers on my phone it's been down for about 2 hours now

If the front and back camera are not working and the phone is new, then it is more likely to be a hardware issue, so if the phone is new it will be under warranty, so take it back to the Apple store or the store that you purchased the phone from and ask for a replacement under warranty.

Similar Messages

  • Hello I send imessages to a phone number I receive delivery notice but sms does not show on receiving phone. Otherwise when receive imessage from other phone I reply and receiver sees SMS !!! Any explanation ?

    Hello I send imessages to a phone number I receive delivery notice but sms does not show on receiving phone. Otherwise when receive imessage from other phone I reply and receiver sees SMS !!! Any explanation ?

    To my knowledge, I've only seen this for imessage only and not SMS.
    The other users would need to have send read receipts enabled on their phone.

  • Just purchased a ringtone from Verizon but it does not show on my phone?

    Purchased a ringtone from Verizon and it does not show on my phone?

    Unfortunately it wont. Apple uses iTunes to sync ringtones purchased from the itunes store.
    Android phones can have ringtones sent directly to their phones.
    http://www.simonblog.com/2010/09/06/how-to-create-ringtone-for-iphone-on-itunes-10/  http://www.tuneclone.com/how-to-free-custom-ringtones-for-iphone-3g.php  https://discussions.apple.com/thread/4371913?start=0&tstart=0  The sites above should help you.  Good Luck

  • Why FB app is not showing via i phone tag ?

    Why FB app is not showing via i phone tag ?

    Because Facebook has coded the app that way.

  • My music I downloaded in itune from my PC will not show on my phone without home sharing

    My music I downloaded in itune from my PC will not show on my phone without home sharing

    Make sure SYNC MUSIC box is checked from Music tab, and SYNC PHOTO box is checked from PHOTOS tab and the photo folder to be selected,  Click the APPLY or SYNC button on the lower right window.

  • My Number Does Not Show Up On Phone Or In iTunes

    This actually occurs on what is now my wife's iphone. It had been mine until I got the 3g one. We got a new sim from AT&T and activated it through itunes for my wife. Everything works, there are no special issues other than what everyone else has seen with the 2.0 software. Her number shows up on caller id on other phones all texts and emails and calls go through with no issue. However her number does not show up anywhere on her phone, not in settings on the phone screen, not on the contacts list and not on itunes either. I remember last year there were some posts regarding this issue but when I was using this phone my number showed up where it was supposed to be so I didn't pay attention to any possible resolutions. I've found a couple of posts that refer to a possible solution involving the sim card. However we went to an AT&T store and two of the guys there who both have iphones said that the sim wouldn't have anything to do with this.
    I'm assuming that something didn't transfer over when we did the activation for her but have no idea how to rectify this. I did try a restore from backup but that didn't do anything. On my phone my number shows up in the right places. Even though this isn't a critical or major issue it does annoy me ( more me than my wife! ). Does anyone have any suggestions?
    John

    Wanted to post an update for anyone else with this issue. I was advised by someone else to call AT&T customer support and have them resend activation/provisioning to the phone. He said he had the issue and this worked for him. So I called and when I finally got someone I was told that there was nothing they could "resend" to the phone but she got in touch with an Apple iphone support person and after explaining the issue to her she connected me to the Apple rep. I explained everything again to her and she said there were two options - the "restore as new phone" which she did not recommend because of the hassle and length of time involved, or have the activation resent to the phone by AT&T. I told her that I had been told there was nothing to be resent. She told me that was incorrect and then she got back in touch with AT&T support then got back to me and said I would see a text message to power off the phone. When I saw that I was to power off and wait 5 minutes and then power the phone back on. At the time I was actually using the phone that had the issue so she called me back on my phone and after 5 minutes I powered the other phone back up and the number now shows up everywhere it's supposed to. Simple, no muss, no fuss and no restore!!
    I thanked her profusely and we both wondered why the first AT&T service person I spoke to did not know that this could be done or did not want to. But she told me the AT&T guys are a little scared of the Apple guys and that they can get things done that we might not be able to. Anyway it is a simple process if you can get them to do it the first time, maybe it's best to go through the Apple people first. The Apple service rep was wonderful and I'm happy!
    John

  • After an update sept 2013 camera not showing picture ipad 4 retina display

    I updated as requested last night 23rd September 2013 IOS7 on my IPAD4 Retina display. The camera does not show a picture and appears to be locked . Very annoying as I don't want to do a factory reset. Can anyone help a senior citizen please without being too technical. Thanks in anticipation

    I did the reset, it's still not working. My iPad is totally new, and I got the same problem.

  • USB/DirectShow camera not showing in NI-MAX

    I've got a Point Grey Chameleon CMLN-13S2M USB 2.0 camera and it is not showing up in NI-MAX.  
    I'm well aware of the Directshow registration problems with the PGR cameras, and as far as I can tell the camera is properly registered.  It shows up with no problems in AMCAP, a simple Directshow viewer, and also in Skype.  
    I just uninstalled the PGR drivers and spent a while going through the registry to delete all references I could to Point Grey and PGR.  I then reinstalled the 32 bit version of the latest drivers, v2.5 beta 2.  I also upgraded the camera firmware to the latest.
    I'm running
    Labview 2012 SP1 f2, 12.0.1
    Vision development module 12.1.0
    MAX 5.4.0f0
    NI-IMAQ 4.7.2
    NI-IMAQdx 4.1.0
    Any ideas?  This is a side project and I've been working on it off and on now for more than a year and I've got to get this camera working.
    Solved!
    Go to Solution.

    Yes, I still see the camera with other DirectShow viewers after the reinstall.  The latest Point Grey drivers give the option to register the directshow drivers during the installation.  I assumed that this worked since the camera shows up with the other DirectShow viewers, but I also manually registered the files according to the instructions in your links just in case.
    I believe that a year or more ago ago when I was running an old version of LV (2009, I think) it did show up in MAX.  I had upgraded a few of the LV components piecemeal, but when my university upgraded to 2012 I decided to uninstall and reinstall with the latest versions of everything.  I have never seen it listed in MAX, red x or not, since I uninstalled the old version to upgrade.
    I have used a camera from a different company and it worked fine.  
    I found that the 32bit directshow cameras are listed in the registry at
    HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{860BB310-5D01-11d0-BD3B-00A0C911CE86}\Instance
    and I verified this by modifiying the "FriendlyName" registry key for the camera that does show up and observing that the name changes in MAX.  The point grey camera is listed here in the registry but does not show up in MAX.

  • My Online number is not showing to the phone I am ...

    When I am calling to any other phone using skype, my online number is not showing in the CLI of that phone.
    But When I call to my Online number, I can receive calls in my skype.
    This is happening after I extended my Online number.

    nilaydiya wrote:
    When I am calling to any other phone using skype, my online number is not showing in the CLI of that phone.
    But When I call to my Online number, I can receive calls in my skype.
    This is happening after I extended my Online number.
    It is possible that the Caller ID settings got wiped out when you extended your Online Number.  This is, unfortunately, something other users have reported.  I'm sorry it happened to you. 
    To reset your Caller ID settings, log into your Skype account here on the Skype web site.  Use the "Account" link at the top of this page, and enter your Skype name and password.  Then you can access your Caller ID settings, and select your Online Number to - once again - be your Caller ID. 
    Patrick
    Location/Ubicacion: Arizona USA
    Time Zone/Hora Local: UTC/GMT -7
    If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
    Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
    I am not a Skype employee. No soy un empleado de Skype.

  • After updating my iphone 4 contact names will not show if someones phones me

    why after updating my iphone 4 will the contact names not show up when someone phones me

    For verizon user, dial *228

  • My phone number not showing in myi phone 4 after updating it to 6.1

    After update my i phone 4 to IOS 6.1 , my phonenumber not showing up under the phone app and i couldnot get I massege and face time to varify . and it took 2 days till nowand still said waiting for activation .
    when you open the phone app it said   my phone unknown
    can you please tellmewhat to do v?
    Thanks for your support
    said

    Looka like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required...
    Be sure to make an appointment first...

  • Imei number is not showing in the phone

    I have one 4S iphone, the problem is that imei nember is not showing up in the phone.
    I restarted the phone, then it says activation problem and when i press the "i" button, IMEI number is not shown.
    I still have the box of my iPhone. Is there is any a way to re-enter the number or any other way to fix it up??
    Please suggest me.

    Copied from my initial post:
    Generally means a hardware failure. Make an appointment at any Apple store.

  • My battery indicator is on green but the percentage is not showing on the phone

    My phone was working fine this morning then suddenly on the home screen the battery percentage disappeared. It was at 56 percent when it disappeared. I shut the phone down, that did not change it. I checked the battery indicator and it was still set to green. I shut it off and then turned it on again. Still no percentage showing on my phone. Any suggestions would be appreciated.

    Since you have already performed a restart, the next user step is a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. Check then.

  • Digital Video Camera not showing up as device on desktop

    I have a 6 year old sony digital video camera. I am able to connect via firewire and upload video using imovie without a problem. It shows up as an option in imovie as dv-vcr. However the video camera does not show up in the desktop and when it is connected I can't find it being recognized anywhere using spotlight. So I am unsure of how to disconnect it. Normally if it shows up in the desktop I would just 'eject' it by dragging to trash. But now I just turn it off and unplug it. When I do it that way the 'did not disconnect properly' message shows up and my external harddrive that is plugged into the other firewire port disappears. Any ideas on how to solve this?

    Hi mpagriffin
    Try this: with Finder on the menu bar go to *Finder / Finder Preferences* and select General, then check all the boxes for *Show these items on the Desktop*.
    You also might check to see if it shows up and ejects in Disk Utility?
    note: that some devices won't show up on the desktop, my wife's Canon will only mount in and eject from iPhoto while all of our other camera's mount on and eject from the desktop.
    Dennis

  • NEW MACBOOK...Camera not showing picture

    Camera was showing my picture on purchase, but now not.
    Software problem?
    I have updated my mac softwares...operating system is now Tiger 4.7...and have Apperture....
    Please help me.

    I don't know what was missing from the first delta (software update of non-combo updater) for 10.4.7 : http://discussions.apple.com/thread.jspa?messageID=2633936 , it's not a known issue w/ that update, but if turning off your machine or the normal resets (pram, PMU) don't work then trying the combo update or the new delta might do something. Kinda doubt it, but if all else fails it's worth a shot. Green lines in video are usually a sign of a bad connector or not enough power.
    Good Luck,
    -j

Maybe you are looking for